Selection of 40 products among
48
CABLE CBLSM1-10
The CBLSM1-10 is a 10 ft.(3m), Y configuration cable supplying DC power and communications to OEM and Legend SM17, SM23 and SM34 Series SmartMotors. CBLSM1-10 cables are designed with the following
connectors: 9 pin female D-sub that is compatible with the serial port of PC's, a 7 pin SmartMotor™ communications D-sub and a special PS-Series power supply connector..
For special lengths, use the CBLSM1-X part number, where X=length in ft.
For multi-axis, serial/RS232 communication, use the part number CBLSM1-X-Y-Z, whereby X=distance from host motor to motor #1, Y=number of smartmotors in series and Z=distance from smartmotor #1 to smartmotor #2.
For multi-axis, parallel/RS485 communication, use the part number CBLSM2-X-Y-Z, whereby X=distance from host motor to motor #1, Y=number of smartmotors in parallel and Z=distance from smartmotor #1 to smartmotor #2.
>>>
View the product on animatics.com
Animatics Corporation
HIGH PERFORMANCE WIRE CUT EDM MACHINES AWT 355S
1. Each axis uses precise ballscrew and linear motion guide.
2. AC servo motor directly go through coupling to drive the ballscrews.
3. The work table is manufactured from stainless design to ensure
best maintence.
4. The U, V axes located upper from the columm to offer accurate stability, it can reach precise taper machining when facing high wire tension and high water pressure.
5. High rigiding design, and well thermal balance are used for precision machining.
6. Submerged work tank you don't find more spread water, offers a complicated machining shape request and stable cutting status.
7. To put the work piece into submerged water, keeps same temperature and reach the work piece stability and non-transformed shape.
8. Simple and reliable Automatic Threading Device design, applies high precision accuracy and easy operator maintenance.
9. Specially designed Ř 1.0mm high pressure water jet on the Automatic Wire Threading system, offers enhanced reliability for threading brass wire from Ř 0.1mm~Ř 0.3mm.
10. The Automatic Wire Threading cut design ensures a clean-cut burr free sharp point to the new wire.
11. Time saving submerged Auto Wire Threading facility.
12. Heavy-duty wire spool shaft design for ease of maintenance.
13. High specification Dynamic Wire Tension Controller.
14. Special upper / lower wire guide set, provides high-speed automatic wire threading in water.
15. High speed submerged cutting for up to 450mm thick work piece.
16. Specilly designed Wire Chopper is available for some models.
17. Large wire spool capacity (20 kgs or above) system as an option, to increase wire change over time up to 170 hours (20Kg brass 0.2mm).
18. Water jet cleaning system located at rear of the tank ensures that the back seal plate and lower arm assembly are kept are free from erosion debris.
19. Smooth lower arm movement fitted with anti leaking system.
20. Lower arm thermal cooling system ensures high stability.
21. Hardened Stainless work tank base, enhance rigidity and support Sealed, well-balanced, box-type design casting of the machine body ensures high thermal balance stability.
22. Each axis uses high precision C1 class ball screws with manual single shot lubrication system on the X and Y axes fitted as standard.
>>>
View the product on joemars.com.tw
JOEMARS
HIGH PERFORMANCE WIRE CUT EDM MACHINES AWT 455S
1.
Each axis uses precise ballscrew and linear motion guide.
2.
AC servo motor directly go through coupling to drive the ballscrews.
3.
The work table is manufactured from stainless design to
ensure best maintence.
4.
The U, V axes located upper from the columm to offer accurate stability, it can reach precise taper machining when facing high wire tension and high water pressure.
5.
High rigiding design, and well thermal balance are used for precision machining.
6.
Submerged work tank you don't find more spread water, offers a complicated machining shape request and stable cutting status.
7.
To put the work piece into submerged water, keeps same temperature and reach the work piece stability and non-transformed shape.
8.
Simple and reliable Automatic Threading Device design, applies high precision accuracy and easy operator maintenance.
9.
Specially designed Ř 1.0mm high pressure water jet on the Automatic Wire Threading system, offers enhanced reliability for threading brass wire from Ř 0.1mm~Ř 0.3mm.
10.
The Automatic Wire Threading cut design ensures a clean-cut burr free sharp point to the new wire.
11.
Time saving submerged Auto Wire Threading facility.
12.
Heavy-duty wire spool shaft design for ease of maintenance.
13.
High specification Dynamic Wire Tension Controller.
14.
Special upper / lower wire guide set, provides high-speed automatic wire threading in water.
15.
High speed submerged cutting for up to 450mm thick work piece.
16.
Specilly designed Wire Chopper is available for some models.
17.
Large wire spool capacity (20 kgs or above) system as an option, to increase wire change over time up to 170 hours (20Kg brass 0.2mm).
18.
Water jet cleaning system located at rear of the tank ensures that the back seal plate and lower arm assembly are kept are free from erosion debris.
19.
Smooth lower arm movement fitted with anti leaking system.
20.
Lower arm thermal cooling system ensures high stability.
21.
Hardened Stainless work tank base, enhance rigidity and support Sealed, well-balanced, box-type design casting of the machine body ensures high thermal balance stability.
22.
Each axis uses high precision C1 class ball screws with manual single shot lubrication system on the X and Y axes fitted as standard.
>>>
View the product on joemars.com.tw
JOEMARS
HIGH PERFORMANCE WIRE CUT EDM MACHINES AWT 655S
1.
Each axis uses precise ballscrew and linear motion guide.
2.
AC servo motor directly go through coupling to drive the ballscrews.
3.
The work table is manufactured from stainless design to
ensure best maintence.
4.
The U, V axes located upper from the columm to offer accurate stability, it can reach precise taper machining when facing high wire tension and high water pressure.
5.
High rigiding design, and well thermal balance are used for precision machining.
6.
Submerged work tank you don't find more spread water, offers a complicated machining shape request and stable cutting status.
7.
To put the work piece into submerged water, keeps same temperature and reach the work piece stability and non-transformed shape.
8.
Simple and reliable Automatic Threading Device design, applies high precision accuracy and easy operator maintenance.
9.
Specially designed Ř 1.0mm high pressure water jet on the Automatic Wire Threading system, offers enhanced reliability for threading brass wire from Ř 0.1mm~Ř 0.3mm.
10.
The Automatic Wire Threading cut design ensures a clean-cut burr free sharp point to the new wire.
11.
Time saving submerged Auto Wire Threading facility.
12.
Heavy-duty wire spool shaft design for ease of maintenance.
13.
High specification Dynamic Wire Tension Controller.
14.
Special upper / lower wire guide set, provides high-speed automatic wire threading in water.
15.
High speed submerged cutting for up to 450mm thick work piece.
16.
Specilly designed Wire Chopper is available for some models.
17.
Large wire spool capacity (20 kgs or above) system as an option, to increase wire change over time up to 170 hours (20Kg brass 0.2mm).
18.
Water jet cleaning system located at rear of the tank ensures that the back seal plate and lower arm assembly are kept are free from erosion debris.
19.
Smooth lower arm movement fitted with anti leaking system.
20.
Lower arm thermal cooling system ensures high stability.
21.
Hardened Stainless work tank base, enhance rigidity and support Sealed, well-balanced, box-type design casting of the machine body ensures high thermal balance stability.
22.
Each axis uses high precision C1 class ball screws with manual single shot lubrication system on the X and Y axes fitted as standard.
>>>
View the product on joemars.com.tw
JOEMARS
HIGH PERFORMANCE WIRE CUT EDM MACHINES WT 455S
1.
Each axis uses precise ballscrew and linear motion guide.
2.
AC servo motor directly go through coupling to drive the ballscrews.
3.
The work table is manufactured from stainless design to
ensure best maintence.
4.
The U, V axes located upper from the columm to offer accurate stability, it can reach precise taper machining when facing high wire tension and high water pressure.
5.
High rigiding design, and well thermal balance are used for precision machining.
6.
Submerged work tank you don't find more spread water, offers a complicated machining shape request and stable cutting status.
7.
To put the work piece into submerged water, keeps same temperature and reach the work piece stability and non-transformed shape.
8.
Simple and reliable Automatic Threading Device design, applies high precision accuracy and easy operator maintenance.
9.
Specially designed Ř 1.0mm high pressure water jet on the Automatic Wire Threading system, offers enhanced reliability for threading brass wire from Ř 0.1mm~Ř 0.3mm.
10.
The Automatic Wire Threading cut design ensures a clean-cut burr free sharp point to the new wire.
11.
Time saving submerged Auto Wire Threading facility.
12.
Heavy-duty wire spool shaft design for ease of maintenance.
13.
High specification Dynamic Wire Tension Controller.
14.
Special upper / lower wire guide set, provides high-speed automatic wire threading in water.
15.
High speed submerged cutting for up to 450mm thick work piece.
16.
Specilly designed Wire Chopper is available for some models.
17.
Large wire spool capacity (20 kgs or above) system as an option, to increase wire change over time up to 170 hours (20Kg brass 0.2mm).
18.
Water jet cleaning system located at rear of the tank ensures that the back seal plate and lower arm assembly are kept are free from erosion debris.
19.
Smooth lower arm movement fitted with anti leaking system.
20.
Lower arm thermal cooling system ensures high stability.
21.
Hardened Stainless work tank base, enhance rigidity and support Sealed, well-balanced, box-type design casting of the machine body ensures high thermal balance stability.
22.
Each axis uses high precision C1 class ball screws with manual single shot lubrication system on the X and Y axes fitted as standard.
>>>
View the product on joemars.com.tw
JOEMARS
