Équipements d'intérieur de voitures (translation in progress): suppliers, wholesalers and manufacturers on Hellopro
Search   


Équipements d'intérieur de voitures (translation in progress) :

22 products
Select the category
    Selection of 22 products among 22
    WINDOW SECTION /HS AND /HD > HS/1

    WINDOW SECTION /HS AND /HD > HS/1
    HS and HD sections are suitable for 4/6mm glazing and are also available with 3 Backing Trim options.These sections have the fastenings hidden in a recessed channel which is then covered with a decorative plastic trim.HS/1 A single window section supplied complete with a Type 1 backing trim, 5mm S/S machine screws and interscrews (150mm fixing centres). The corner/bend radii available for 'S' sections are measured at the aperture and given below *. >>>
    View the product on houdini-marine.co.uk Houdini Marine Windows
    LIBERTAS BOAT HOUSES - CHERTSEY

    LIBERTAS BOAT HOUSES - CHERTSEY
    DETAILSLENGTH OVERALL: 42' 8" (13.0m)BEAM OVERALL: 27'9" (8.5m)RIDGE HEIGHT: 24'3" (7.4m)LIVING AREA: 796 sq. ft. (74sqm.)OVERALL CRAFT LENGTH: 31'0" (9.4m)OVERALL CRAFT BEAM: 13'0" (4.0m)CRAFT AIR DRAFT: 7'0" (2.1m)SLEEPS: TWOA Libertas boathouse offers year round protection for your boat with the benefit of luxurious accommodation on the upper deck.The boathouses are designed to be moored in purpose made docks either within or alongside the river bank. They are often able to be moored in locations where, because of planning or other constraints, it would not be possible to construct a conventional buildingBecause it floats, a Libertas boathouse will never flood, nor will your boat suffer damage to its upper works during times of flood. Your boat will remain secure and fully protected from the elements regardless of weather or water level. >>>
    View the product on bateswharf.co.uk Bates Wharf Marine Sales
    CABIN HEATERS

    CABIN HEATERS
    HOTPOT Cabin Heaters use the same heating principle as your cars heater. Hot water from the engine's closed cooling circuit heats a matrix in the heater. A fan motor then blows air over the matrix into the cabin. HOTPOT Cabin Heaters are designed for marine applications, and the robust components are contained in a stainless steel housing. Each unit has four outlets, and there are a range of outlets and hoses to allow installation into most vessels. >>>
    View the product on asap-supplies.com A.S.A.P. Supplies
    WINDOW SECTION /HV & /HW - HW/3

    WINDOW SECTION /HV & /HW - HW/3
    HW and HV sections are heavy duty sections suitable for use with 10/12mm glazing and are also available with 3 backing trim options. Fastenings are hidden in a recessed channel which is then covered with a decorative plastic trim. W/3 A double window fitted with a 16swg flat section cut to the customers specification/dimensions (to a maximum 75mm) and supplied complete with a Type 3 backing trim. >>>
    View the product on houdini-marine.co.uk Houdini Marine Windows
    LIBERTAS BOAT HOUSES - HURLEY

    LIBERTAS BOAT HOUSES - HURLEY
    DETAILSLENGTH OVERALL: 53' 2" (16.2m)BEAM OVERALL: 27'9" (8.5m)RIDGE HEIGHT: 24'6" (7.4m)LIVING AREA: 796 sq. ft. (74sqm.)OVERALL CRAFT LENGTH: 31'0" (9.4m)OVERALL CRAFT BEAM: 13'0" (4.0m)CRAFT AIR DRAFT: 7'0" (2.1m)SLEEPS: TWOA Libertas boathouse offers year round protection for your boat with the benefit of luxurious accommodation on the upper deck.The boathouses are designed to be moored in purpose made docks either within or alongside the river bank. They are often able to be moored in locations where, because of planning or other constraints, it would not be possible to construct a conventional buildingBecause it floats, a Libertas boathouse will never flood, nor will your boat suffer damage to its upper works during times of flood. Your boat will remain secure and fully protected from the elements regardless of weather or water level.Flexibility in design ensures that a Libertas boathouse will truly enhance each individual owner’s enjoyment of the water. Where the proposed mooring is within the grounds of an existing house, the architectural character of the building can, if required, be reflected in the elevations of the boathouse. >>>
    View the product on bateswharf.co.uk Bates Wharf Marine Sales
    WINDOW SECTIONS TYPE HS AND HD - HD/1

    WINDOW SECTIONS TYPE HS AND HD - HD/1
    HS and HD sections are suitable for 4/6mm glazing and are also available with 3 Backing Trim options.These sections have the fastenings hidden in a recessed channel which is then covered with a decorative plastic trim.HD/1 A double window section supplied complete with a Type 1 backing trim, 5mm S/S machine screws and interscrews (150mm fixing centres). The corner/bend radii available for 'D' sections are measured at the aperture and given below *. >>>
    View the product on houdini-marine.co.uk Houdini Marine Windows
    SIMPSON DAVITS - HANDYLIFT OUTBOARD DAVIT - HL60

    SIMPSON DAVITS - HANDYLIFT OUTBOARD DAVIT - HL60
    A simple tube davit is designed to take the effort out of lifting outboards and other weighty articles aboard from tender or pontoon. Lifting capacity ranges from 35 to 125kg according to model. An optional mid-height swivel joint is available to allow stowage in small spaces. The fixing clamp slides on the lower section of the Handylift tube and uses the pushpit rail as a support. Base size is 100 x 100mm with an offset socket for fitting next to toe rail (125KG has different system please contact us for details). All models in 316 stainless steel. >>>
    View the product on cooneymarine.co.uk Cooney Marine (Simpson Davit)
    SIMPSON DAVITS - SERIES 8

    SIMPSON DAVITS - SERIES 8
    Simpson Davits and have been developing products to improve on the traditional davit for many years. The lastest result is the new Series 8 Davit, improving the well proven design of the established Series 7 Davit, with an improved gearbox assembly and different finishing options. The Simpson Series 8 Davit retains a seven sided structure giving the davit a greatly improved look and retaining all of the strength of the traditonal design. The Series 8 models were conceived with electrification very much in mind and the power version has no external motor casing to detract from the streamlined shape. Power winches have historically been avoided on sailing yachts due to battery capacity on board, but this unit is designed to keep current drain to minimum and make the powered option a first choice especially as manual override is fitted as standard. The Series 8 Davit comes in various size configurations with lifting capacities from 150kg to 300kg per pair (please note 300kg not available in manual version). >>>
    View the product on cooneymarine.co.uk Cooney Marine (Simpson Davit)
    SIMPSON DAVITS - TRADITIONAL DAVITS

    SIMPSON DAVITS - TRADITIONAL DAVITS
    Models 100, 125, 150, 175, 200, 225, 250 Traditional Davits have been designed to lift or lower weights up to 250kg (550lbs) per pair. They are manually operated, and incorporate an adjustable sliding arm extension for final positioning of the raised dinghy or tender. Standard base allows for the easy access of the securing bolts and can be used in conjunction with transom brackets or deck shoes, which makes for the easy removal of the davits for stowage. >>>
    View the product on cooneymarine.co.uk Cooney Marine (Simpson Davit)
    WINDOWS DATA SHEETS - DECK HATCHES

    WINDOWS DATA SHEETS - DECK HATCHES
    Houdini hatches have a worldwide reputation for robust construction, quality and economic pricing. The hatches can be provided with or without safety bars and come complete with two casement handles for effective and positive closing and a built in ventilation stay. With an above deck height of a mere 25mm these hatches are extremely streamlined and cause the minimum obstruction on the deck. >>>
    View the product on houdini-marine.co.uk Houdini Marine Windows




      Search    
     
     
     
    Search
    See all of the sector's products : Transport