Water fountains: suppliers, wholesalers and manufacturers on Hellopro
Search   


Water fountains :

17 products
Select the category
Selection of 17 products among 17
SWAN NECK WATER FOUNTAIN - FLOOR STANDING

SWAN NECK WATER FOUNTAIN - FLOOR STANDING
Swan Neck Water Fountain This cooler is strong and robust and perfect for those busy school corridors, stylish stainless steel top with double push button operation. Can be attached to the wall (optional) Double push button operation Strong and robust Perfect for those busy school corridors Water Flow control The Water Fountain is rated to supply 1.7 litres per minute. An automatic self regulating control is fitted to overcome varying mains pressure. Cabinet Polished stainless steel top. Spray coated metal side panels. Easily removable front panel for ease of filter exchange & servicing. Refrigeration System Non Toxic, non flammable and environmentally sympathetic R-134a refrigerant. The refrigerant flow is controlled by a capillary tube with no moving parts. To provide for maximum heat exchange (and increase cold water capacity) a suction line is fitted to remove the heated air. Cooling System Hard drawn copper and tin plated 1.5 Litre cold water tank with chilling chamber to meet peak demand. Cooling Capacity 19 l per hour to 10 C from water inlet temperature of 26.7 C and ambient temperature of 32.2 C The hourly Cooling Capacity increases exponentially if the Incoming water temperature is less than 26.7 C, as will be the case in the UK. Compressor & Condensor Compressor: 1/5 h.p. capacity 230 watt Condensor: Copper tube and expanded aluminium finish Power supply 240 Volt, 50Hz. 3 pin plug and 200 cm power cord. Dimensions & Weight Dimensions: H 110cm x W 35cm x D 35cm Weight: 32 Kg >>>
View the product on cooleraid.co.uk CoolerAid
AZURE WATER DISPENSER

AZURE WATER DISPENSER
Description The award-winning Azure is a water machine with a real difference. Its design effectively combines the benefits of a point-of-use water dispenser with the convenience of a full-sized vending machine. The provision of water in the workplace need no longer provide you with a headache in terms of additional services and cup control. Benefits Perfect for banking alongside new or existing vending machines UV purification removes worries about mains water quality Bottle sensor allows customers to use re-fillable plastic bottles Flavour-hinted water available Dimensions Height: 1830 mm Width: 500 mm Depth: 740 mm >>>
View the product on lttvending.com LTT Vending
PURE WATER L5 SYSTEM

PURE WATER L5 SYSTEM
The PURE Water™ L5 Units are versatile freestanding water dispensers, which are particularly suited for use in areas of reasonably low drinking water requirement, similar to that of a traditional water cooler. This is usually within the office environment or staff refreshment areas. CONFIGURATIONS The PURE WATER™ Stand Alone Unit can be supplied in a variety of configurations to suit your requirements. Counter top situated. Mounted on a stand for placement in corridors or where no appropriate counter is available. Can be supplied as a Still only unit or as Still and Sparkling. All units are supplied with our unique PURE LINK™ filtration system, and can be fitted with Ultra Violet treatment on request. >>>
View the product on purewater.no The Pure Water Company Ltd
AZURE WATER DISPENSER

AZURE WATER DISPENSER
Description The award-winning Azure is a water machine with a real difference. Its design effectively combines the benefits of a point-of-use water dispenser with the convenience of a full-sized vending machine. The provision of water in the workplace need no longer provide you with a headache in terms of additional services and cup control. Benefits Perfect for banking alongside new or existing vending machines UV purification removes worries about mains water quality Bottle sensor allows customers to use re-fillable plastic bottles Flavour-hinted water available Dimensions Height: 1830 mm Width: 500 mm Depth: 740 mm >>>
View the product on lttvending.com LTT Vending
PURE WATER L10 SYSTEM

PURE WATER L10 SYSTEM
This is one of the best individual system staff drinking water solutions on the market. The dispense point is very attractive, fitting into any modern environment and the under counter units supply up to 80 litres of purified, chilled and carbonated water per hour. We advise using both a carbon filter (to remove chlorine, cysts, sediment and other tastes and odours) and a UV filter (to remove bacteria). >>>
View the product on purewater.no The Pure Water Company Ltd
WATER COOLER - WATERLOGIC - WL350

WATER COOLER - WATERLOGIC - WL350
Description This desk top cooler is ideal for small office locations, reception areas and meeting rooms, delivering an instant and constant supply of high quality chilled drinking water Benefits Constant supply of chilled filtered water preset to 5›C Low power consumption Advanced water filtration and ultraviolet technology Dimensions Table Top Height: 485 mm Width: 345 mm Depth: 365 mm >>>
View the product on lttvending.com LTT Vending
AQUARIUS BOILER - DESKTOP

AQUARIUS BOILER - DESKTOP
Aquarius Boiler The larger of the two boilers, with a tap allowing you to fill hot jugs safely with a large capacity perfect for a busy canteen area or staffroom. Removable drip tray Easy to fill jugs and coffee pots Boiling filtered water Stylish stainless steel finish The tank has a capacity of 15 litres with an immediate draw off of 11.4 litres of boiling water at any time. The Dimensions are 580mm H x 280mm W x 470mm D (incl drip tray) Electronic automatic fill Precise temperature control Low water cut out Thermally efficient for low operating costs Front mounted overflow Brushed stainless steel Tricolour LED indicator for Empty, Heating and Ready >>>
View the product on cooleraid.co.uk CoolerAid
COOLER FOR SCHOOLS MAINS FED - FLOOR STANDING

COOLER FOR SCHOOLS MAINS FED - FLOOR STANDING
Cooler For Schools Mains Fed This cooler is ideal for schools and gyms, and with a single push button operation and a nozzle outlet allowing jugs, glasses or bottles to be easily filled. Large nozzle enables sports bottles and jugs to be filled Can be attached to the wall (optional) Single push button operation Strong and robust Optional drainage Cabinet High Grade zinc-coated steel with plastic laminate external coating. Integral side-mounted ventilation and removable front service panel. Driptray Lift out design. High impact durable plastic. Taps Push button operation. Deep dispensing area for sports bottles, etc. Refrigeration System Air cooled refrigeration condenser complete with 7 Watt fan motor. Environmentally-friendly, zero-ozone depleting, CFC free, R-134a refrigerant. Cooling System Vapour-charge thermostat factory set at 10 degrees Celsius, dispensing 18 litres per hour. Thermally-bonded refrigeration grade seamless copper tube 'direct chill' 'coil-on coil' evaporator assembly to provide instantaneous cooling and prevent cross-contamination of the drinking water & refrigeration circuits. Power supply 220/240V/1-Phase/50Hz with 1˝ metre 3 core power cable. Power Consumption: 170 Watts. Dimensions Floor standing: H 99cm x W 30.7cm x D 39cm >>>
View the product on cooleraid.co.uk CoolerAid
EVOLUTION MAINS FED - DESKTOP

EVOLUTION MAINS FED - DESKTOP
Evolution Mains Fed Stylish silver, with modern looks and can supplied as either counter top or floor standing water cooler. Available in Hot and Cold or Ambient and cold High durability scratch resistant body Solenoid duel tap operation Optional 5lt drip tray overflow Duel integrated cup holder Cabinet Cold-rolled 20 gauge embossed steel with baked on acrylic enamel finish. Driptray Lift out design. High impact durable plastic. Removable anti splash grid. Taps Push type. Made of high impact durable ABS. Easy to remove and clean. Cup Holder Integrated cup holder with exposed locking nuts to open up for easy refilling of cups. (Available on floor standing models only) Removable lower front panel Spring loaded lower front panel. Remove drip tray and simply press down to remove entire lower front panel for easy access. Refrigeration System Quiet, air cooled static-type condenser. No fan required. Protected against motor overload. Unit hermetically sealed. R-134a refrigerant. Cooling System Stainless steel 3 Litre cold water tank. Thermostatically controlled from 4-12 degrees Celsius. Heating System Stainless Steel 2 Litre tank. 430 watt instantaneous heating. Bi-metal temperature control. Designed to prevent total drainage for heating element protection. Easily accessible hot water tank drain at the back of cooler. Power supply 220 Volt, 50/60Hz. 3 pin plug and 180 cm power cord. Dimensions Benchtop: H 47cm x W 34cm x D 34cm >>>
View the product on cooleraid.co.uk CoolerAid
PLATINUM BOTTLED - FLOOR STANDING

PLATINUM BOTTLED - FLOOR STANDING
Platinum bottled Stylish, sleek and a well designed cooler. This is the most popular of all our water coolers and will look good in any environment. Available in Floor standing and Desktop Ambient and cold or Hot and Cold Silver or graphite colour choice Optional 20lt drip tray overflow Driptray Lift out design. High impact durable plastic. Drainable drip tray which is able to be expanded to hold 20lts of excess waste concealed inside the cooler for hygienic dispense. Taps Lever type. Made of high impact durable ABS. Safety taps designed for hot tap. Easy to wipe and keep clean. Removable lower front panel For easy access inside the machine and to remove the excess waste from the drip tray (if required) Temperature Control This unit is equipped with individual IC board control on cold, room or hot system internally to provide cold, room or hot water 24 hours a day. Cooling System Stainless steel 3 Litre cold water tank. Thermostatically controlled from 4-11 degrees Celsius. Heating System Stainless Steel 2 Litre tank. Thermostatically controlled at 94 degrees Celsius. Power supply 240 Volt, 50/60Hz. 3 pin plug and 180cm power cord. Dimensions Floor standing: H 108cm x W 33cm x D 36cm >>>
View the product on cooleraid.co.uk CoolerAid
PLATINUM MAINS FED - DESKTOP

PLATINUM MAINS FED - DESKTOP
Platinum Mains Fed Stylish, sleek and a well designed cooler. This is the most popular of all our water coolers and will look good in any environment. Available in Floor standing and Desktop Ambient and cold or Hot and Cold Silver or graphite colour choice Optional 20lt drip tray overflow Also available in Direct chill Driptray Lift out design. High impact durable plastic. Drainable drip tray which is able to be expanded to hold 20lts of excess waste concealed inside the cooler for hygienic dispense. Taps Lever type. Made of high impact durable ABS. Safety taps designed for hot tap. Easy to wipe and keep clean. Removable lower front panel For easy access inside the machine and to remove the excess waste from the drip tray (if required) Temperature Control This unit is equipped with individual IC board control on cold, room or hot system internally to provide cold, room or hot water 24 hours a day. Cooling System Stainless steel 3 Litre cold water tank. Thermostatically controlled from 4-11 degrees Celsius. Heating System Stainless Steel 2 Litre tank. Thermostatically controlled at 94 degrees Celsius. Power supply 240 Volt, 50/60Hz. 3 pin plug and 180 cm power cord. Dimensions Benchtop: H 50cm x W 33cm x D 36cm >>>
View the product on cooleraid.co.uk CoolerAid
PLATINUM MAINS FED - FLOOR STANDING

PLATINUM MAINS FED - FLOOR STANDING
Platinum Mains Fed Stylish, sleek and a well designed cooler. This is the most popular of all our water coolers and will look good in any environment. Available in Floor standing and Desktop Ambient and cold or Hot and Cold Silver or graphite colour choice Optional 20lt drip tray overflow Also available in Direct chill Driptray Lift out design. High impact durable plastic. Drainable drip tray which is able to be expanded to hold 20lts of excess waste concealed inside the cooler for hygienic dispense. Taps Lever type. Made of high impact durable ABS. Safety taps designed for hot tap. Easy to wipe and keep clean. Removable lower front panel For easy access inside the machine and to remove the excess waste from the drip tray (if required) Temperature Control This unit is equipped with individual IC board control on cold, room or hot system internally to provide cold, room or hot water 24 hours a day. Cooling System Stainless steel 3 Litre cold water tank. Thermostatically controlled from 4-11 degrees Celsius. Heating System Stainless Steel 2 Litre tank. Thermostatically controlled at 94 degrees Celsius. Power supply 240 Volt, 50/60Hz. 3 pin plug and 180 cm power cord. Dimensions Floor standing: H 108cm x W 33cm x D 36cm >>>
View the product on cooleraid.co.uk CoolerAid
PLATINUM MAINS FED - FLOOR STANDING

PLATINUM MAINS FED - FLOOR STANDING
Evolution Mains Fed Stylish silver, with modern looks and can supplied as either counter top or floor standing water cooler. Available in Hot and Cold or Ambient and cold High durability scratch resistant body Solenoid duel tap operation Optional 5lt drip tray overflow Duel integrated cup holder Cabinet Cold-rolled 20 gauge embossed steel with baked on acrylic enamel finish. Driptray Lift out design. High impact durable plastic. Removable anti splash grid. Taps Push type. Made of high impact durable ABS. Easy to remove and clean. Cup Holder Integrated cup holder with exposed locking nuts to open up for easy refilling of cups. (Available on floor standing models only) Removable lower front panel Spring loaded lower front panel. Remove drip tray and simply press down to remove entire lower front panel for easy access. Refrigeration System Quiet, air cooled static-type condenser. No fan required. Protected against motor overload. Unit hermetically sealed. R-134a refrigerant. Cooling System Stainless steel 3 Litre cold water tank. Thermostatically controlled from 4-12 degrees Celsius. Heating System Stainless Steel 2 Litre tank. 430 watt instantaneous heating. Bi-metal temperature control. Designed to prevent total drainage for heating element protection. Easily accessible hot water tank drain at the back of cooler. Power supply 220 Volt, 50/60Hz. 3 pin plug and 180 cm power cord. Dimensions Floor standing: H 117.5cm x W 34cm x D 34cm >>>
View the product on cooleraid.co.uk CoolerAid
STAINLESS STEEL MAINS FED - FLOOR STANDING

STAINLESS STEEL MAINS FED - FLOOR STANDING
Stainless Steel Mains Fed A modern and stylish cooler, with a duel push button operation. A perfect look for wherever this cooler is placed. Available in hot and cold or ambient and cold Easy wipe stainless steel finish Colour matched cup dispenser Optional bottled hood Power rating Single phase (220-240V 50Hz) (100-115V 60Hz) Standard current H&C: 6.2A, C&C:1.2A Power Consumption Cold 74W Hot 450W Cold Compressor Single phase motor (TS24 LATG) Refrigerant R-134a Capacity 3.5l (0.9 gal) Hot Compressor Single phase motor (TS24 LATG) Refrigerant R-134a Capacity 3.5l (0.9 gal) Refrigerant charge 28.4g (1.0 oz) Noise(sound power level) 38dB(A) Net weight H&C:17.5kg (38.6 Ib), C&C:16.6kg (36.7 Ib) Product dimensions W 30.5cm x D 31.2cm x H 98cm >>>
View the product on cooleraid.co.uk CoolerAid
STILL AND CARBONATED MAINS FED - FLOOR STANDING

STILL AND CARBONATED MAINS FED - FLOOR STANDING
Still and Carbonated mains Fed At last! A watercooler that not only gives you cold and room temperature water, but carbonated as well! A stylish, top of the range cooler. Cold, ambient and sparkling Large drip tray Drainage (optional) Duel integrated cup holder Sparkling Water A choice of full carbonation and half carbonation available at the touch of a button. Disposable CO2 cylinder provides approximately 250 7oz cups at full carbonation and 500 7oz cups at half carbonation. Cabinet Cold-rolled 20 gauge embossed steel with baked on acrylic enamel finish. Driptray Lift out design, which can be connected to mains drainage. High impact durable plastic. Removable anti splash grid. Taps Push type. Made of high impact durable ABS. Easy to remove and clean. Cup Holder Integrated cup holder with exposed locking nuts to open up for easy refilling of cups. (Available on floor standing models only) Removable lower front panel Spring loaded lower front panel. Remove drip tray and simply press down to remove entire lower front panel for easy access. Refrigeration System Quiet, air cooled static-type condenser. No fan required. Protected against motor overload. Unit hermetically sealed. R-134a refrigerant. Cooling System Stainless steel 3 Litre cold water tank. Thermostatically controlled from 4-12 degrees Celsius. Power supply 220 Volt, 50/60Hz. 3 pin plug and 180 cm power cord. Dimensions Floor standing: H 117.5cm x W 34cm x D 34cm The Range WCPC3300XC02: POU Floor standing Cook & Cold WCBC3300XC02: Bottle Floor standing Cook & Cold CO2X2: 2 Pack Replacement C02 Cylinders CO2X12: 12 Pack Replacement C02 Cylinders >>>
View the product on cooleraid.co.uk CoolerAid




  Search    
 
 
 
Search
See all of the sector's products : Business equipment