Selection of 82 products among
289
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
FAN WITH DIRECT DRIVE
- 2500m³/h
- aluminium structure
- easily removable panels in galvanised steel
- with thermal & acoustic insulation
- centrifugal double suction fan
- dimensions in mm (W/D/H): 600X600X600
- max. Amperage: 3,6
- Volt: 230- KW: 0,42- HZ: 50
- Phases: 1
- Weight: 35kg
>>>
View the product on gastrodirect.fr
FAN WITH DIRECT DRIVE
- 5500m³/h
- aluminium structure
- easily removable panels in galvanised steel
- with thermal & acoustic insulation
- centrifugal double suction fan
- dimensions in mm (W/D/H): 750X750X750
- max. Amperage: 3,4
- Volt: 400- KW: 1,3- HZ: 50
- Phases: 3
- Weight: 65kg
>>>
View the product on gastrodirect.fr
FAN WITH DIRECT DRIVE
- 10000m³/h
- aluminium structure
- easily removable panels in galvanised steel
- with thermal & acoustic insulation
- centrifugal double suction fan
- dimensions in mm (W/D/H): 850X850X850
- max. Amperage: 8,5
- Volt: 400- KW: 2,2- HZ: 50
- Phases: 3
- Weight: 76kg
>>>
View the product on gastrodirect.fr
FAN WITH DIRECT DRIVE
- 4000m³/h
- aluminium structure
- easily removable panels in galvanised steel
- with thermal & acoustic insulation
- centrifugal double suction fan
- dimensions in mm (W/D/H): 600X600X600
- max. Amperage: 4,6
- Volt: 230- KW: 0,55- HZ: 50
- Phases: 1
- Weight: 37kg
>>>
View the product on gastrodirect.fr
FAN WITH DIRECT DRIVE
- 4400m³/h
- aluminium structure
- easily removable panels in galvanised steel
- with thermal & acoustic insulation
- centrifugal double suction fan
- dimensions in mm (W/D/H): 750X750X750
- max. Amperage: 5,0
- Volt: 230- KW: 0,51- HZ: 50
- Phases: 1
- Weight: 62kg
>>>
View the product on gastrodirect.fr
GLO-RAY MERCHANDISING DISPLAYWARMERS GRSDH-30
The perfect unit to merchandise hot fast foods is the Hatco Glo-Ray® Merchandising DisplayWarmer.
Designed specifically to hold hot wrapped or boxed product,
this unit holds hot food safely at proper serving temperatures.
Glo-Ray Merchandising Warmers have prefocused infrared top heat and a thermostatically-controlled hardcoated
heated base to extend the holding times of most food.
Hardcoated shelves, adjustable dividers, shatter-resistant incandescent display lights,
and 6' (1829 mm) cord with plug are standard.
FLEXIBILITY
This warmer offers the convenience of self serve and the efficiency of kitchen-to-serverholding.
Available with horizontal shelves, the Glo-Ray Merchandising Warmers
are offered in both single and dual shelf models.
Slant shelves are offered in single, dual and triple shelf models.
All models are made of extruded aluminum and sturdy stainless steel with tempered glass end panels.
Specially coated incandescent lights illuminate the food holding area.
Designed with a slanted base and horizontal shelf, the GRSDS/H series is ideal for holding
popcorn on the top shelf and nachos, boxedpizza, or wrapped sandwiches on thebottom shelf.
Alternative control locations make placement of merchandiser on front or back serving counters possible.
An optional high wattage top shelf is ideal for holding fried foods and an optional top
shelf clearance of 15" (381 mm) is also available.
Slant models 30" (762 mm) and wider will accommodate 18" x 26" (457 x 660 mm)sheet pans.
QUALITY
The following features assure the finest performance for years to come:
• All models have prefocused infrared topheat directing heat to
the outer edges of the holding surface where heat loss is the greatest.
• These warmers feature a thermostatically controlled, hardcoated heated base and a cord and plug set.
• Coated shatter-resistant incandescent lights enhance product display
while safeguarding food products from bulb breakage.
• An optional Indicating Temperature Control enhances accurate control
of temperature and provides digital readout of temperature.
VOLTAGE
GRSDH-24 to -52, GRSDS-24 to -60, GRSDH-24D, GRSDS-24D, GRSDS-30D, and GRSDS/H-30D: 120 volts,
single phase (use NEMA 5-15P; GRSDH-52,GRSDH-24D, GRSDS-60, GRSDS-30D, and GRSDS/H-30D
use NEMA 5-20P for Canada).
GRSDH-30D, GRSDS-36D, GRSDS-24T, and GRSDS/H-36D: 120 volts, singlephase (use NEMA 5-20P).
GRSDH-60, GRSDH-36D to -60D, GRSDS-41D to -60D, GRSDS-36T, andGRSDS/H-41D, -30DHW, -36DHW,
-41DHW: 120/208 or 120/240 volts, single phase, 4-wire (use NEMA L14-20P).
GRSDH-36D to -52D and GRSDS-41D to 52D: 120 volts, single phase (use twoNEMA 5-15P cords
- not available for Canada).
Export voltages available.
CORD LOCATION
GRSDH: Left rear corner toward server side.
GRSDS: Control side at right base corner.
GRSDS/H: Control side at right base corner.
OPTIONS (NOT FOR RETROFIT)
* Designer Colors:Warm Red, Black, Gray Granite,White Granite, Navy Blue, Hunter Green,Antique Copper
* Indicating Temperature Control (ITC)
* Stainless Steel End Panels (In lieu of Glass End Panels)
* Sneeze Guard (GRSDS models, one side) (GRSDH models, two sides)
* 15" (381 mm) Clearance Top Shelf (GRSDS/H models)
* Halogen Bulbs in lieu of Standard Display Lights
ACCESSORIES
* Flip-up Doors on One Side (24" thru 41"W (610-1041 mm) models)
(not available with sneeze guard option or display sign holder accessory on same opening)
* Split Flip-up Doors on One Side (52" and 60"W (1321-1524 mm) models)
* Backlit Sign Holder (Signs not included) – 120V 30"-52" (762-1321 mm) Slant Models,Top Shelf Only
* Display Sign Holder (Signs not included) – Top or Intermediate Shelf
* 4" (102 mm) Adjustable Legs (Standard on units over 36" (914 mm) in length or
weighing more than 80 lbs. (36 kg))
* Additional Stainless Steel Divider Rods
PRODUCT SPECS
Merchandising Warmer
The MerchandisingWarmer shall be a Glo-Ray® Model.
With 24/7 service (U.S. and Canada only), the warmer shall be rated at ... watts, ...volts, and be ... inches
(millimeters) in overall width.
It shall consist of athermostatically-controlled, hardcoated heated base, infrared heat from above, full
view tempered glass sides, adjustable divider rods, and incandescent display lights.
The infrared heating element shall be tubular metal sheathed
and the warmer shall have a cord with plug attached.
Accessories shall include backlit sign holder (slant models, top shelf only), displaysign holders,
and additional stainless steel dividers rods.
>>>
View the product on gastrodirect.fr
SMOKE AND FIRE VENTILATION SYSTEMS
To ensure smoke and fire ventilation systems are installed and operate correctly, attention should be paid to the recommendations of the LPC Design Guide for the Fire Protection of Buildings (2000).
All approved products will bear the LPCB mark and reference number. Certification is limited to the sizes and classifications given.
Fire ventilation systems are installed:
To keep escape and access routes free from smoke.
To facilitate fire fighting operations by creating a smoke free layer.
To delay and/or prevent flashover and the subsequent full development of the fire.
To protect equipment, furnishings, contents, etc.
To reduce the thermal effects on structural components during a fire.
To reduce damage caused by thermal decomposition products and hot gases.
The key components of smoke and fire ventilation systems are fire dampers, ductwork, smoke curtains and powered smoke and heat exhaust ventilation fans. Compartmentation is defined as a building element designed to prevent the spread of fire within or between buildings, for further information refer to The LPC Design Guide for the Fire Protection of Buildings (2000).
Fire dampers are installed:
To maintain compartmentation where air distribution ducts pass through compartment walls and floors.
To achieve the same fire resistance in terms of integrity as required for compartment walls or floors.
To close in response to a fire within the protected compartment.
All the fire resistant dampers listed in our Red Book have been tested and assessed against the requirements of LPS 1162 [Requirements and tests for the LPCB approval of fire dampers].
Fire resistant ductwork is installed:
To maintain compartmentation when air distribution ducts pass through compartment walls and floors where fire resisting dampers are not used to provide the compartmentation.
To achieve the same fire resistance in terms of integrity, and if required insulation, as required for the compartment walls or floors.
All the fire resistant ducts listed in Volume 1 Section 2 of our Red Book have been tested and assessed against the requirements of BS 476: Part 24 [Fire tests on building materials and structures: Method for determination of the fire resistance of ventilation ducts].
Smoke curtains are used:
To create a smoke reservoir by containing and limiting the travel of smoke.
To channel smoke in a predetermined direction.
To prevent or retard smoke entry to another area or void.
All the smoke curtains listed in Volume 1 Section 3 of our Red Book have been tested and assessed against the requirements of LPS 1182 [Requirements and tests for fixed fabric smoke curtains, fixed metal smoke curtains and powered smoke curtains].
Powered smoke and heat exhaust ventilation fans are used:
To channel heat and smoke in a predetermined direction
To prevent smoke logging of the protected space.
All the fans listed in our Red Book have been approved against the requirements of BSEN 12101-3 [Smoke and heat control systems. Part 3 Specification for powered smoke and heat exhaust ventilation].
>>>
View the product on redbooklive.com
LPCB/BRE
VENTILATION SYSTEMS
Our experience designing and installing ventilation systems is wide. Attention to detail is paramount from concept through to final commissioning. Successful project management is ensured. As
members of the HVCA we are committed to installations of the highest quality.
Plastic Fabrication
We have the capability to design and supply all types of PVC and polypropylene extract systems. All installations are tailor-made to suit specific requirements and can include carbon and HEPA filtration for hazardous processes.
Our specialist PVC engineers fabricate on-site in accordance with HVAC DW/154. Using hot gas fusion welding, we fabricate high quality ductwork to virtually any size and shape.
In addition to manufacturing our own range of PVC fan units, we can offer specialist fans for almost any application and all types of ancillary equipment, including filtration housings, dilution manifolds, attenuators and custom made support framework.
We also specialise in manufacturing custom made enclosures for local exhaust ventilation.
Metal Fabrication
Whether for general ventilation or a special purpose we can design and supply bespoke mild steel and stainless steel ventilation systems in accordance with HVCA DW/144. Stainless steel kitchen canopies can be custom made with all elements complying with DW/171. Using the latest plasma CNC technology we can fabricate to the highest standard.
We specialise in the refurbishment and upgrade of existing systems. Often, minor alterations to an existing installation can result in significant improvements, preventing the need for costly replacement.
We can supply a full range of air handling plant and ancillary parts;
Fan units
Motors
Drive belts and pulleys
Filter housings
Silencers
Support brackets
Heater batteries
Chillier units
>>>
View the product on tecomak.co.uk
Tecomak
