Vannes hydrauliques (translation in progress): suppliers, wholesalers and manufacturers on Hellopro
Search   


Vannes hydrauliques (translation in progress) :

1759 products
Select the category
    Selection of 40 products among 1759
    BUTTERFLY VALVES

    BUTTERFLY VALVES

    Double off-centre design with removable gasket. ”Wafer” type models with flanges or to mount between flanges. Valve and butterfly in flake-graphite cast iron or spheroid graphite cast iron. Cast iron/elastomer, stainless steel/elastomer, metal/metal watertightness. Face to face spacing meeting most national and international standards and notably: ISO, EN, NF, BS, DIN, ANSI (AWWA)... DN 100 / DN 2000 Pressure classes: PN 2.5 - PN 10 - PN 16. On/off control, setting or regulation functions. Manual, pneumatic, electric reducer controls... >>>
    View the product on lefebvre.fr Vannes LEFEBVRE
    CLEAN HIGH PURITY VALVE

    CLEAN HIGH PURITY VALVE

    CHabonim's family of clean valves are intended for use on critical process applications which require contaminant free conditions. The use of high grade materials, exacting surface finishes and a quick acting leak free construction, results in a clean valve suitable for the semi-conductor, food, pharmacutical and cosmetic industries. With the introduction of the TuBore range, Habonim now offer valves that exactly match the internal bore dimensions of the pipe work, allowing crevice and step free pipe runs ideal for C.I.P and pigging systems. >>>
    View the product on ramuniversal.co.uk Ram Universal Limited
    DIRECT SPRING - SERIES 60 AND 80 PRESSURE RELIEF VALVES

    DIRECT SPRING - SERIES 60 AND 80 PRESSURE RELIEF VALVES

    Types 81 and 83 are direct spring operated valves designed with special patented internals and soft seats to provide superior performance. This range is capable of solving the most difficult pressure relief problems with valves suitable for gas, vapor, and steam service. Type 81 and 83 valves carry the ASME Section VIII Code Stamp. Orifice Sizes: 0.049 in² [0.32 cm²] and D through J Connections: 1/2” x 3/4” to 2” x 3” Inlet Flange Ratings: ANSI 150, 300, 600, 900, 500, 2500 Maximum Temperature: 550°F [288°C] Minimum Pressure: 20 psig [1.4 barg] Maximum Pressure: 10,000 psig [690 barg] >>>
    View the product on andersongreenwood.com Anderson Greenwood Crosby Ltd
    ANTI-POLLUTION VALVE - BACKFLOW PREVENTION FIG 255 RPZ

    ANTI-POLLUTION VALVE - BACKFLOW PREVENTION FIG 255 RPZ

    ApplicationsThe RPZ Backflow Prevention valve, also referred to as an Anti-Pollution valve is a type BA safety device used to prevent contamination of drinking water through siphoning or backflow up to class 4 fluid category. They are particularly suitable for industrial and commercial applications and can also be used for supplies to buildings within the scope of the water regulations. Specific applications include:* Mini Irrigation Systems* Fire Sprinkler Systems* Commercial / Industrial Unvented Heating Systems* Drinks Vending Machines* Food Processing / Brewery and Distillation Plant* Car Washing and degreasing plantsConstructionRPZ valves operate on the principal of interrupting the continuity of supply and discharging any possible backflow to waste. The valves operate on the principle of three chambers within a valve body, the pressure in the central chamber is controlled by two check valves and a spring operated relief valve. >>>
    View the product on deltafluidproducts.com Delta Fluid
    CHECK VALVE FOR CONTROL SYSTEMS

    CHECK VALVE FOR CONTROL SYSTEMS

    Check Valves for Control Systems These check valves seal bubble tight even without back pressure and provide a smooth, minimum resistance flow path when open. The poppet is spring loaded for operation in any position. The spring load is borne by a metal stop, rather than by the soft seat, ensuring long seal life and minimum maintenance. Operation is smooth and chatter-free. Sizes 1/4” and 3/8” FNPT 1/4” and 1/2” MNPT Maximum operating pressure 10,000 PSIG (689.5 BARG) Operating temperature -40° to 450°F (-40° to 232°C) Seals Buna N or Viton >>>
    View the product on ep-solutions.com eProduction Solutions
    2/2 WAY COAXIAL DIRECT ACTING FK 65

    2/2 WAY COAXIAL DIRECT ACTING FK 65

    Ports FK flanges PN 16 function NC pressure range 0-16 bar Kv value 45,0 m³/h media gaseous - liquid - highly viscous - gelatinous - contaminated flow direction A B as marked switching cycles 20 1/min switching time ms opening 600 closing 800 media temperature °C DC: -20 to +80 AC: -20 to +80 ambient temperature °C DC: -20 to +80 AC: -20 to +80 weight kg FK 35,0 nominal voltage Un 24 V DC Un 230 V 40-60 Hz AC actuation DC direct-current magnet AC direct-current magnet with integrated rectifier insulation rating H 180°C protection IP65 energized duty rating ED 100% connection plug acc. DIN EN 175301-803 form A, 4 positions x 90° / wire diameter 6-8 mm >>>
    View the product on co-ax.com M?r co-ax AG
    RS VALVE

    RS VALVE

    The drop throught rotary valve type "RS" is particularly suitable for the feeding and pneumatic conveying of products in grain and powder and it can be used in all industrial sectors involving pneumatic conveying lines with average / low pression. Infact, for the particular construction, for several type of rotors and the minimum tolerances, it ensures excellent airlock and flowing in pneumatic conveying lines. This valve has been studied to fit any type of product or special requirement of the customer. Manufactured in cast-iron, nickel / chromium plated cast iron or stainless steel AISI316, it is supplied with bare shaft or motorization consisting in variable speed gearmotor or gearmotor and complete drive with chain guard according to CE rules. >>>
    View the product on olocco.it Olocco
    AUTOTROL 900 PRO SERIES CONTROLS 940 MECHANICAL CONTROL

    AUTOTROL 900 PRO SERIES CONTROLS 940 MECHANICAL CONTROL

    He rugged and dependable 940 control is available with your choice of a 7-day or a 12-day timer for regeneration flexibility. Other features include: * Oversized gears and large dials for long life and easily adjustable settings * The availability of an adjustable backwash control * A new two-speed gearbox drive that opens the valve discs faster for more precise control and flexibility If you're looking for rugged, reliable water-conditioning performance, you've found it with the 940 mechanical control. >>>
    View the product on purotech.ie PuroTech Ltd
    VALVE: 302A METAL SEAT/FIRESAFE

    VALVE: 302A METAL SEAT/FIRESAFE

    A range of Double Offset, metal seated Fire-safe valves to API standards. The range is certified Fire-safe to API 607 4th edition, and is available in both wafer and lugged pattern bodies.The valve is suitable for bi-directional flow, and the disc is designed to reduce thermal expansion, thus providing constant sealing performance against temperature and pressure cycling conditions.Seat: 316LDisc: CF3M/CF8M with hard chromed edgeBody: Cast steel and CF8M stainless steel DN80 to DN600Seat leakage: API598 7th editionSize range: DN80 to DN600Pressure range: ASME/ANSI B16.34, Class 150Temp. range: -29°C to 600°C (extended bonnet advised over 400°C) >>>
    View the product on tomoeeurope.co.uk Tomoe Valve Ltd
    VALVE - VORTEX  ® ABRASIVE GATE ™

    VALVE - VORTEX ® ABRASIVE GATE ™

    Heavy duty, carbon steel constructionFor gravity applicationsNarrow profile aids installation6” – 24” square or rectangular sizesDesigned specifically to handle abrasive material.The Vortex Aggregate Gate valve is designed to meet the demanding applications associated with handling materials such as sand, gravel, whole grains and coal. Many options are available to accommodate abrasive material and harsh environments. >>>
    View the product on vortexvalves.com VORTEX VALVES
    BUTTERFLY VALVE DKZ 103

    BUTTERFLY VALVE DKZ 103

    Butterfly Valve DKZ 103 - Ring slide valve DN 50 - DN 1100 General Information Series 103 is a tight-seal interposed flange valve for flanges as per DIN 2501. The valves are absolutely air-tight in line with DIN 3230 BO Leak Rate 1. The housing is one-piece, and the sealing sleeve comes in two designs - detachable or fixed (galvanised). The shut-off valve is suitable for solid, liquid and gaseous media and the temperature range is from -40 to +200°C. The series is also available as a throttle valve (metal seal closure) for hot gases with temperature over 200 up to 460°C. Features of the Warex-Valve maintenance-free design largely self-supporting housing centrally-positioned valve disk, with special shaft connection, giving an absolute seal in both directions of flow seals with lateral overlap and an additional sealing rim give a perfect seal between the flanges without any extra flange seal. sturdy construction the shaft end and the armature head are designed to fit to a wide range of drives. Interfaces as per DIN/ISO 5211. Material Specifications Housing Silumin (Wilmil), GG25, GGG 40, Special steel housing Valve disk Special steel, GGG, PVDF, laminated, ground and polished Sleeve Buna N, NBR, Hypalone, EPDM, Vitone, Silicone, amongst others Shafts and lugs Special steel, 9S20K Stuffing box MS, PTFE O Rings Buna N, Vitone >>>
    View the product on warex-valve.com Warex Valve
    FLOW CONTROL VALVE  MODEL 770-U

    FLOW CONTROL VALVE MODEL 770-U

    Securing design specifications • Prioritizing main system over sub-system • Limiting consumers over-demand • Controlling pipeline fill-rate • Pump overload & cavitation protection The Model 770-U Flow Control Valve is a hydraulicallyoperated, diaphragm-actuated, control valve that maintains pre-set maximum flow, regardless of fluctuating demand or varying system pressure. Features and Benefits • Line-pressure driven – independent operation • Hydraulic flow sensor (upstream installation) - No moving parts - No electronic components - No need for flow straightening • In-line serviceable – easy maintenance • Double chamber design - Moderated valve reaction - Protected diaphragm >>>
    View the product on watercontrol.ie Water Control
    CONTROL VALVE - ARI-STEVI 405

    CONTROL VALVE - ARI-STEVI 405

    Application : Industrial installations, processing technology, plant manufacturing, etc. Medium : Cooling water, cooling brine, warm water, hot water, steam, gas, etc. Application (bellows seal) : Industrial installations, processing technology, plant manufacturing, etc. Medium (bellows seal) : Refrigerant, Cooling water, warm water, hot water, thermal oil, steam, gas, etc. eClass-No.: 37010201 >>>
    View the product on ari-armaturen.com ARI Armaturen (UK)
    FIG 100 AUTOMATIC AIR VENT

    FIG 100 AUTOMATIC AIR VENT

    Applications The Fig 100 Automatic Air Vent is an extremely efficient valve designed for use on central heating installations where the removal of large air bubbles trapped in the system helps to reduce noise levels, maintain circulation and improve heat output. They can also be fitted to other fluid systems where air inclusion causes problems. Construction All wetted parts of the Fig 100 automatic air vent are manufactured from dezincification resistant materials; the valve body is of gunmetal construction, the sturdy float is of all stainless steel manufacture and the seating faces are of the proven PTFE to metal design. The inlet connection is 1/2" BSP female thread to BS21 and the vent connection is screwed 3/8" BSP male. Features RELIABLE OPERATION RESILIENT PTFE SEATING DESIGN SUITABLE FOR HOT WATER HEATING SYSTEMS HIGH DEGREE OF SEAT TIGHTNESS SAFE DISCHARGE CAPACITY EASY INSPECTION AND CLEANING OPTIONAL LOCKSHIELD VALVE AVAILABLE NO MECHANICAL MOVING PARTS >>>
    View the product on deltafluidproducts.co.uk Brownall NABIC
    CAGE GUIDED CONTROL VALVE

    CAGE GUIDED CONTROL VALVE

    Series 12 / 72Sizes 1” to 30” (25mm to 750mm)Ratings ASME 150 to ASME 4500Features* Robust/Proven Design* Low Noise Trim Standard* Multi stage designs available (9 stages/20 turns)* Controlled Velocity Design Principle* Fully stellited/Tungsten Carbide TrimMaterials available* Optional end sizes available to match pipe size* Downstream Silencer units for high-noise attenuation >>>
    View the product on kentintrol.com Koso Kent Introl Ltd
    2-WAY BALL VALVES

    2-WAY BALL VALVES

    Wide range of different connectors e.g. bite fitting DIN 2353 L/S, Whitworth female thread DIN ISO 228-1, SAE, UNC and UNF female thread, metric female thread ISO 6149 and NPT female thread ANSI B1.20.1 ° nominal diameters from 4 to 50 (1/8“ to 2“) high-grade materials like steel, stainless steel or brass for pressures up to 1400 bar (20000 PSI) with optional pneumatic, electricor hydraulic actuator also available withposition indicator, limit switch,proximity switch or locking device. >>>
    View the product on roetelmann.de R?mann
    BUTTERFLY VALVES - HIGH PERFORMANCE VALVES

    BUTTERFLY VALVES - HIGH PERFORMANCE VALVES

    Wafer, lugged and double flanged, double eccentric butterfly valves in compliance with ISO or ASME standards Soft seat, fire-safe and metal seatDouble eccentric operating principleActuator flange according ISO 5211Accessible packing adjustment without operator removalBi-directional shut-off performance, End-of-line serviceTA-Luft approved stuffing box (optional)Pressure class: Full vacuum to PN 25, ASME 150/300/600Sizes: DN 50- DN 700, 2” to 28”Temperature range: -50°C to + 520°CFlange accommodation: PN 10/16/25, ASME 150/300/600 >>>
    View the product on tycoflowcontrol-eu.com Tyco Valves & Controls
    ELECTRONIC RELIEF VALVES - ERV

    ELECTRONIC RELIEF VALVES - ERV

    ANSI Ratings: 150 - 4500 Sizes: 1/2" - 36" The Valvtechnologies Electronic Relief Valve (ERV) is the answer to the need for a zero-leakage, pilot-operated relief valve. The ERV package combines Valvtechnologies zero-leakage isolation valve with electronic controls to monitor and regulate system pressure. Whether in a capacity-relieving function requiring the ASME V-stamp or simply in an overpressure protection application, the ERV provides reliable protection for standard safety valves in many industries. Valvtechnologies can also provide an integral isolation valve, eliminating the need for costly field welding. Standard blowdown and set pressure is accurate to 1/10% >>>
    View the product on valv.com Valvtechnologies
    PRESSURE VACUUM VALVE AND BLANKETING VALVE

    PRESSURE VACUUM VALVE AND BLANKETING VALVE

    The combined Pressure Vacuum and Blanketing Valve is a compact and cost effective solution to storage tank losses and emissions. Sized for normal inbreathing and outbreathing, when product is pumped out of the tank or vessel, the tank pressure drops and when it reaches the inert gas blanketing valve set point, say 3 mbarg, it opens and allows the inert gas to fill the vapour space until the pressure increases above the set point. On filling the tank, the pressure increases in the tank until it reaches the set point of the Pressure Vacuum valve which then opens and allows out the excess pressure. If there is a problem with the inert gas supply and the tank is being emptied, then the vacuum side of the pressure vacuum valve opens at the given set point, say minus 2.5 mbarg and allows air into the tank to prevent tank implosion. This is a cost effective solution for fitting a pressure vacuum valve and blanketing valve on one tank nozzle. >>>
    View the product on aval.co.uk Aval Limited
    SAFETY RELIEF VALVE - 19000 SERIES

    SAFETY RELIEF VALVE - 19000 SERIES

    The Consolidated® 19000 Series Valve surpasses ASME and proposed CEN code requirements in functional performance and overpressure protection. The valve provides superior performance in seat tightness, capacity and blowdown for all media. Inlet Sizes: 1/2" to 2" threaded, socket weld, butt weld, flanged, Grayloc? or sanitary fitting design. Inlet Ratings: (for flanged valves) ANSI Class 150 to 2500 Outlet Sizes: 1" to 2-1/2" threaded, socket weld, butt weld, flanged or sanitary fitting design. Outlet Ratings: (for flanged valves) ANSI Class 150 and 300 Orifice Sizes: .096 sq. in. to .567 sq. in. Set Pressure Range: 15 psig to 8000 psig Temp. Range: -425?F to 1100?F Materials: Stainless steel, Monel, Hastelloy, Alloy 20, and other exotic materials are available. Code: ASME Section III and VIII >>>
    View the product on dresser.com Dresser UK Ltd
    ACCESSORY SANDWICH VALVES

    ACCESSORY SANDWICH VALVES

    Sandwich valves, which mount under directional valves, save space, reduce weight and provide flexibility in locating valves Standard pressure valves, rated for 3000 psi (210 bar), mount on N.F.P.A. D03 and D05 (ISO 03 and 05) patterns and D05H size valves High pressure VSW Series, with HP03 mounting interface, are rated for 10 000 psi (700 bar) VSW Series, with HP05 mounting interface, are rated for 8000 psi (560 bar) Functions include flow control, relief, pressure reducing, counterbalance, decompression, and check valves >>>
    View the product on dynexhydraulics.com Dynex




      Search    
     
     
     
    Search
    See all of the sector's products : Hydraulics - Pneumatics