Thermoplastics: suppliers, wholesalers and manufacturers on Hellopro
Search   


Thermoplastics :

366 products
Select the category
    Selection of 41 products among 366
    THERMOPLASTIC ELASTOMERS - G75A 520 205/09

    THERMOPLASTIC ELASTOMERS - G75A 520 205/09

    Thermoplastic elastomers. A range of SBS (Styrene, Butylene, Styrene copolymer) and SEBS (Styrene, Ethylene, Butylene, Styrene copolymer) and alloys for injection moulding and extrusion. The hardness range is from 0 Shore A through to 40 Shore D in both clear (semi-transluscent) , opaque natural and black colours. Colouring can be achieved using Gabriel and Pancolor masterbatches at typically 2% addition rate. The temperature use for SBS is from –40 to +80 degrees C and for SEBS from –40 to 110 degrees C depending on the formulation. Clear grades are limited to a maximum of +90 degrees C but improved compression set grades will reach +130 degrees C. Applications can be interior and exterior with UV stability. Many end user automotive approvals exist in addition to food and medical uses. Flame retardant grades are available for electrical applications. >>>
    View the product on azelisplastics.co.uk Azelis Plastics UK
    THERMOPLASTIC ELASTOMERS - TES A9006 SVZ1

    THERMOPLASTIC ELASTOMERS - TES A9006 SVZ1

    Thermoplastic elastomers. A range of SBS (Styrene, Butylene, Styrene copolymer) and SEBS (Styrene, Ethylene, Butylene, Styrene copolymer) and alloys for injection moulding and extrusion. The hardness range is from 0 Shore A through to 40 Shore D in both clear (semi-transluscent) , opaque natural and black colours. Colouring can be achieved using Gabriel and Pancolor masterbatches at typically 2% addition rate. The temperature use for SBS is from –40 to +80 degrees C and for SEBS from –40 to 110 degrees C depending on the formulation. Clear grades are limited to a maximum of +90 degrees C but improved compression set grades will reach +130 degrees C. Applications can be interior and exterior with UV stability. Many end user automotive approvals exist in addition to food and medical uses. Flame retardant grades are available for electrical applications. >>>
    View the product on azelisplastics.co.uk Azelis Plastics UK
    POLYOLEFIN - PROTEUS® HOMOPOLYMER

    POLYOLEFIN - PROTEUS® HOMOPOLYMER

    Appropriate for applications to 180F (82C) Resists most acids, alkalis and solvents Meets FDA 21CFR 177.1520 Thermoforming performance USDA, NSF and 3-A Dairy Complaint (natural color only) Chemical- and corrosion-resistant No moisture absorption This crystalline material is noted for its high strength-to-weight ratio, excellent chemical resistance and high performance in thermoforming and corrosive environments. Proteus® Homopolymer is "natural" in color, stress relieved and is available in three sheet sizes: 48" x 96" with gauge sizes ranging from 1/16" to 3" 48"x 120" with gauge sizes ranging from 1/8" to 2" 60" x 120" sheets with gauge sizes ranging from 1/8" to 1" >>>
    View the product on quadrantplastics.com Quadrant Epp France
    AEROSPACE

    AEROSPACE

    Tuffak® W polycarbonate sheet is the premium product in the market for construction of polycarbonate aircraft canopies. Airman in the US Air Force and other armed services trust the Tuffak® polycarbonate sheet brand and the technical expertise of Altuglas International. Tuffak® W polycarbonate sheet has been used in the F-16 Falcon, the F-18 Hornet, and the F-22 Raptor. >>>
    View the product on altumax.com Altumax UK Ltd
    ENGINEERING PLASTICS - NYLACAST AQUANYL

    ENGINEERING PLASTICS - NYLACAST AQUANYL

    Aquanyl is a copolymer of Nylon 6 and Nylon 12 produced via the anionic polymerization process using the monomer's Caprolactam and Laurinlactam. It has reduced water absorption, improved stability and impact strength.Key benefits: * Outstanding dimensional stability and impact strength * Reduced water absorption * Lower hardnessIndustry users: * Petrochemical * Offshore * Railways * Ship building Typical applications: * Seal rings * Pipe clamps * Thrust rollers * Nozzles * Bushes >>>
    View the product on nylacast.com Nylacast Ltd
    ABRASION-RESISTANT SOLID POLYCARBONATE SHEET - PALGARD™

    ABRASION-RESISTANT SOLID POLYCARBONATE SHEET - PALGARD™

    Overview PALGARD is a flat UV and abrasion resistant polycarbonate sheet, delivering a winning combination of properties. PALGARD excels in resisting vandalism, graffiti spraying and physical attack. The sheet is also more resistant to a wider variety of chemicals and the increased wear and tear of high traffic areas. PALGARD can also be glass-laminated for ballistic application purposes. Features and Benefits • Abrasion Resistant on one or both sides • Resistance to acts of vandalism • Graffiti sprays easily cleaned • Resistant to scratches and chemicals • Impact Resistant - Virtually unbreakable • Up to 90% light transmission • Provides excellent acoustical insulation • UV protection - better than sunscreens • Lightweight • Easy to mount and install Typical Applications • Safety glazing • Security and ballistic resistant glazing • Anti-vandal glazing • Prison windows • Acoustic barriers • Industrial protective shielding • Bus stop and telephone booth glazing • Protective shields for police or security forces • Protective helmet visors Characteristics Type: Flat Sheet Sheet Material: Polycarbonate Durability: Excellent Transparency: Clear & Translucent Maximum %LT: Excellent >>>
    View the product on palram.com Palram Europe Ltd
    ACRYLIC PLASTISOLS

    ACRYLIC PLASTISOLS

    Utilising the water-based emulsion technology available in the Speciality Coatings Group, we are developing acrylic-based compounds for wallcovering effects. Acrylic Foam DF003 A foamable acrylic emulsion, producing a similar surface texture to that achieved with foamable PVC plastisol, but chlorine-free and plasticiser-free. Can be applied by rotary-screen, and foamed in a conventional expansion oven @ 160oC. It may be coloured using suitable water-based pigment preparations. >>>
    View the product on sclgroup.com Speciality Coatings Group
    AUTOTHANE™ MICROCELLULAR POLYURETHANE SYSTEM

    AUTOTHANE™ MICROCELLULAR POLYURETHANE SYSTEM

    AUTOTHANE™ Why use polyurethanes... Company Information How to get Technical Information Selector Guides Download Literature Press Releases & News Website Contents AUTOTHANE DIOPLEX DIOREZ DIPRANE DURELAST DURAMOULD DYNATHANE HYPERCRETE HYPERKOTE HYPERLAST MONOTHANE REZILUBE ROTAKOTE SERIES-SIX TRAFFIDECK XiTRACK Further Information Home Page AUTOTHANE™ is a high performance microcellular polyurethane system based on hybrid polyols and MDI technology from Dow Hyperlast. It has been specifically developed for impact, shock and vibration management in automotive applications. AUTOTHANE™ offers OEM and Tier 1 design engineers high performance solutions to technical problems in suspension design, performance and vibration control. The AUTOTHANE™ system offers: • High tensile and tear strength • Low temperature flexibility (Tg of -63°C) • High resistance to repeated compression • Progressive load deflection characteristics AUTOTHANE™ • Easy to process • Cost effective • Offers a short in-mould time • Is designed for high-quality, high-volume automated moulding processes • Conforms to current automotive specifications for high-stress components • Has over 12 years history of service on vehicles The majority closed cell structure and integral skin gives components moulded in AUTOTHANE™: • High abrasion resistance • Excellent hydrolytic stability • Resistance to microbial degredation • Improved damping characteristics • Longevity of on vehicle performance These properties make AUTOTHANE™ components ideal for use in numerous automotive chassis, suspension and NVH (Noise, Vibration and Harshness) applications: • Spring Aids in McPherson Strut type designs on cars, trucks, vans, SUV’s, motorcycles and snow mobiles. • Bump stops in Leaf Spring suspension designs • Suspension top mounts • Suspension spring seats • Body and cab mounts • Seat damping • Bush stiffeners • Vibration Isolating washers and bushes For many years, design engineers have been making use of the unique mechanical and dynamic properties of high density microcellular polyurethane elastomers. When used in suspension systems or vibration isolation applications, these materials are known to improve a vehicles handling, comfort and ride quality. The AUTOTHANE™ microcellular polyurethane technology combines these benefits to meet engineers needs in NVH applications. TECHNICAL SUPPORT The AUTOTHANE™ team at Dow Hyperlast and its manufacturing licensees aim to meet customer specific needs in terms of both performance and cost. Highly qualified design engineers, technical and production personnel and the range of services offered, is comprehensive. • Product design • Prototyping • Component characterisation, durability testing and validation • Application technical service • Ongoing technical support to both licensees and customers From basic product requirements and specifications supplied by the customer, we can produce component designs to meet all the functional demands of a product. Our service carries on through to expert advice on processing and component manufacture worldwide through our existing licensees in Europe, North America, China, Malaysia, Korea, Russia and India and plans to expand this network to Japan, South America and the Middle East are well underway. >>>
    View the product on hyperlast.com Dow Hyperlast Ltd.
    POLYESTER & POLYIMIDE DISCS

    POLYESTER & POLYIMIDE DISCS

    MOCAP’s high temperature polyester powder coating discs are held in stock for immediate delivery. The Polyester Discs will resist 425°F for one hour and remove easily without leaving any residue. Polyimide Discs will withstand continuous temperatures of 400°F and resist short exposures over 700°F.Unique Split Backing means maximum masking efficiency and labor savings! This special feature is also available in metric sizes. MOCAP also offers more discs per roll to reduce inventory, eliminate time for changing rolls and reduced disc cost. >>>
    View the product on mocap.com MOCAP Limited
    NEOPRENE N-GROUP

    NEOPRENE N-GROUP

    Types N-5101, N-5102, N-5107, N-5110, N-5120, N-5150, N-5155 available dimensions length 170 mm to 4200 mm width 3 mm to 450 mm thickness 0,45 mm to 1,8 mm standard type color black running side smooth outside profile typical features antistatic, bendable, UV-resistant, not inflammable, good chemical resistance, weather-proof and excellent longevity, powerful >>>
    View the product on bgkendlosband.de BGK Endlosband
    ATHENA SPUN POLYESTER - COLOURED NAPKIN

    ATHENA SPUN POLYESTER - COLOURED NAPKIN

    Good quality, soft to touch, cotton feel, easy care fabric, plain design. Choice of colours. Top Seller Produced from 100% jet spun polyester which produces a cotton soft feel combined with the benefits of easy care properties of polyester. Good colour rentention, minimal shrinkage, excellent durability with good stain release properties. Napkins are finished with hems on all four sides. Hem size is 1cm. >>>
    View the product on bluejigsaw.co.uk Blue Jigsaw
    PERSPEX® FROM LUCITE® CAST ACRYLIC SHEET

    PERSPEX® FROM LUCITE® CAST ACRYLIC SHEET

    Perspex® from Lucite® Cast Acrylic Sheet is the leading material for signs, POP, interior displays and general fabrication. Perspex® Cast has excellent aesthetic and technical properties, which make it ideal for applications where quality and performance are paramount. Perspex® Cast has a high molecular weight and is exceptionally hard wearing. It is resistant to weathering, fading, and extremes of temperature and is easy to handle, machine and fabricate. Perspex ® Cast Sheet has excellent acoustic properties making it ideal for highway sound screens, engineering machine enclosures and telephone hoods. Perspex® Cast Acrylic is available in a wide range of clears, opals, tints and solid colours ranging from soft delicate pastels to strong vibrant shades and in a wide range of thickness and surface textures to suit most applications. A specialist range of Perspex® Cast Acrylic products has been developed to meet the constantly changing needs of designers and specifiers of signs and interior displays. Perspex® Frost - cool, subtle frosted appearance Perspex® Pearlescent - intriguing iridescent effect Perspex® Fluorescent - exciting live edge effect Perspex® Fluorescent Anti-Reflective - a new double - sided product with a fluorescent live -edge effect and soft sheer surface texture Perspex® S-Lux -perfect for slim, edge-lit signs Perspex® VA/VE - for protection against ultraviolet light- perfect for museums and galleries Perspex® Cast Sheet is a premium product that has continued to evolve and out-perform its contemporaries for almost 70 years - no wonder designers and specifiers choose it again and again. >>>
    View the product on perspex.co.uk Perspex Distribution Ltd
    ACRYLIC & PVC - ACRYLIC STANDS

    ACRYLIC & PVC - ACRYLIC STANDS

    Product - Further Information There are two rigid acrylic stands that are designed to hold 1/3 A4 paper (210mm x 99mm). The triangular format shows three pieces of paper while the star shows six sides. Features - made from rigid acrylic - Slide in your own information - Two different styles - star and triangle Sizes - Star Holder shows 6 x H210mm x W99mm - Triangle Holder shows 3 x H210mm x W99mm Lead Times - 2 to 5 Working days >>>
    View the product on menushop.co.uk The Menu Shop
    GMTEXTM FOR EXTREME CRASH REQUIREMENTS

    GMTEXTM FOR EXTREME CRASH REQUIREMENTS

    Quadrant refers to its glass mat-reinforced thermoplastics which are reinforced additionally with various types of fabric as GMTexTM. Thus, if extreme crash requirements apply, our GMTexTM types are the number 1 choice. Be they bidirectionally reinforced in 90° and 45° direction or simply only unidirectionally reinforced, Quadrant Plastic Composites offers you a broad selection of options. Thanks to the additional free-flowing random fibre share, you can even manufacture ribbed components easily. >>>
    View the product on quadrantplastics.com Quadrant EPP UK Ltd
    ACETAL C - ERTACETAL C

    ACETAL C - ERTACETAL C

    ACETAL C - ERTACETAL C This is the Quadrant Engineering Plastic Products' virgin copolymer acetal grade. The acetal copolymer is more resistant against hydrolysis, strong alkalis and thermal-oxidative degradation than the acetal homopolymer. Profile High mechanical strength, stiffness, hardness and toughness Excellent resilience Good creep resistance High impact strength, even at low temperatures Very good dimensional stability (low water absorption) Good sliding properties and wear resistance Excellent machinability Good electrical insulating and dielectric properties Physiologically inert (suitable for food contact) Not self-extinguishing Applications Automotive Applications Gears Bearings Industrial Applications Electrical/Electronic Applications Electrical Parts General Purpose Electronic Data Processing Machine/Mechanical Parts >>>
    View the product on abbeydistribution.com Abbey Distribution Ltd
    CRISTAMID® POLYAMIDES

    CRISTAMID® POLYAMIDES

    Description Cristamid products are amorphous transparent polyamides, combining the excellent properties of PA12 semi crystalline polyamide and the transparency of amorphous polymers. Available products : Cristamid MS1700 Cristamid MS1100 Properties Key performance : Very transparent, even in thicker parts High resistance to chemicals and stress cracking, much higher than traditional amorphous polymers High Impact strength, stiffness and toughness High heat resistance >>>
    View the product on arkemagroup.com/arkema/gb/home/d_home.cfm Arkema Group
    POLYCARBONATE  PC 1000; NATURAL (CLEAR, TRANSLUCENT)

    POLYCARBONATE PC 1000; NATURAL (CLEAR, TRANSLUCENT)

    Non UV stabilised polycarbonate stock shapes under the trade name PC 1000 (virgin grade). It is a natural, "non-optical" industrial quality (clear, translucent). High mechanical strength Good creep resistance Very high impact strength, even at low temperatures Stiffness retention over a wide range of temperatures Very good dimensional stability (very low water absorption and low coefficient of linear thermal expansion) Physiologically inert (suitable for food contact) Higher temperature resistance than acrylic and offers greater impact strength. >>>
    View the product on bayplastics.co.uk Bay Plastics Ltd
    REINFORCED ELASTOMER GASKET

    REINFORCED ELASTOMER GASKET

    Chomerics' reinforced conductive elastomer seals consist of a corrosion-resistant CHO-SEAL® elastomer base, reinforced with a woven or knitted fabric material. These seals are intended for use in airframe shielding applications. The integrally molded reinforcing material provides improved mechanical properties, resulting in seals that withstand high levels of wear and abuse, while maintaining the electrical properties of the conductive elastomer base material. >>>
    View the product on chomerics.com Chomerics Europe
    FLEXIBLE PVC COMPOUNDS

    FLEXIBLE PVC COMPOUNDS

    FLEXIBLE PVC COMPOUNDS Flexible PVC compounds have wide application in many market sectors. The degree of softness can be adjusted to suit any desired application and they can be transparent or coloured. Typical Applications: Electrical Cables – Insulation and sheathing Special high performance cables General profiles and mouldings Clear tubing and profile applications Seals and gaskets Nitrile modified grades Wire coating Blown films for packaging Calendered foils Footwear Low plasticiser migration and non-marring grades >>>
    View the product on doeflex-vitapol.co.uk Doeflex Vitapol
    PVC-U DOORS - GEORGIAN SOLID

    PVC-U DOORS - GEORGIAN SOLID

    PVC-U doors can be made to specification. The options available are the same styles of PVC-U and glass available in the window specification In addition a range of Hallmark panels can be included in the doors. For a full range of panel designs, click here to be linked to the Hallmark website. Composite Doors: Download detailed composite door specification in PDF format Colour options: The basic colours available are White, Oak, Mahogany, Blue, Green and Red. The clour guide below is an approximate representation of the available colours: note that this is an approximate guide and the wood grain effect is not shown. Please enquire further for detailed information. It is possible to mix different colours to the front and rear of the door slab. 2. Styles : The styles below illustrate some of the most popular choices. Further styles are available on request. Georgian Solid Georgian Glazed Georgian Glazed Fan Victorian Glazed Victorian Half Glazed . Glazing A variety of glazing styles are available - please enquire for further details. 4. Further Details: Dorwin has close associations with most door slab manufacturers enabling us to supply a wide variety of doors. Please contact us with your individual requirements. >>>
    View the product on dorwin.co.uk Dorwin Ltd
    MACHINED ENGINEERING POLYMERS

    MACHINED ENGINEERING POLYMERS

    MACHINED ENGINEERING POLYMERS In addition to our range of Fluoropolymer products, Beldam Crossley Ltd offer machined components in a range of engineering polymer materials. These include: PEEK (Polyetherehterketone) - 450G and filled grades specially formulated for the aerospace industry. Nylocross 2001(Polyamide Oil Filled) - a low cost, high performance oil filled Nylon 6. Ideal for bearings and gears. U.H.M.W.P.E (Ultra High Molecular Weight Polyethylene) - exceptional for both wear and chemical resistance. P.O.M. C & H (Polyacetal Copolymer and Homopolymer) - Excellent fatigue endurance stiffness and impact strength. P.E.T.P. (Polethylene Terephthalate) - Extremely high wear resistance, very low moisture absorption with FDA compliance. Nylon PA 66 (Polyamide) - Universal all round material economical, abrasion resistant, tough and rigid. Other materials available on request. Finished Parts Machining is the quickest and most economical way to produce small to medium quantities of finished polymer parts. It can be the only way to produce complex parts with undercuts and threaded forms Beldam Crossley has many years experience in the fabrication and machining of engineering polymers, which means we can help to ensure that your designs and plans are within the operating parameters of the selected materials, and that they can be produced in a practical and economic way. It is our aim to create a better product and provide greater cost effectiveness. >>>
    View the product on beldamcrossley.co.uk Malcolm Downer
    LUXURY VINYL TILES - EXPONA WOOD - AMERICAN OAK -  6139

    LUXURY VINYL TILES - EXPONA WOOD - AMERICAN OAK - 6139

    Name: American Oak Code: 6139 Gauge: 3mm, 0.7mm wear layer Plank size: 152 x 914mm Notes: Decoration and shade may vary slightly from the samples shown. Variation in colour and design is a feature of this product intended to enhance the natural appearance of the floor Expona Art & Design Collection - flooring design for commercial areas A wide collection of wood designs from standard to rustic effects with authentic textures Suitable for use within all residential areas and very heavy commercial situations >>>
    View the product on polyflor.com Polyflor Ltd
    C-FLEX® TUBING

    C-FLEX® TUBING

    C-Flex® is a unique, patented thermoplastic elastomer specifically designed to meet the critical demands of the medical, pharmaceutical, research, biotech and diagnostics industries. C-Flex® biopharmaceutical tubing has been used by many of the world’s leading biotech and pharmaceutical processing companies for over 20 years. Each coil of C-Flex® tubing is extruded to precise ID, OK and wall dimensions in an FDA-registered medical device facility in accordance with the regulations concerning this registration. All tubing is formulated to meet the standards of the biopharmaceutical industry and is QA tested before leaving our production facility. >>>
    View the product on plastics.saint-gobain.com/ Saint-Gobain Performance Plastics
    BIODEGRADABLE BACKGROUND

    BIODEGRADABLE BACKGROUND

    THE BIODEGRADABLE BACKGROUND: Over 25 years experience and an award winning background means we can now manufacture your polythene bags and sheeting in biodegradable polythene material. Our biodegradable bags are far superior in quality and design than most polythene bags on the market currently. RECYCLED BIODEGRADABLE PACKAGINGAll our polythene waste is recycled. No plastic or polythene is wasted. If it can be recycled it will be. Some customers prefer to use recycled polythene material. It is cheaper than standard polythene and it is real recycling at work. Perhaps you need a box liner bag, you know that the customer will not see the box as it is kept in stores, the box needs to be kept open for easy access and handling but the products it holds need to be kept dust free… this is an ideal opportunity to use recycled polythene - it will protect your product and keep costs down. As biodegradable specialists, we can manufacture biodegradable polythene bags from polythene that has already been recycled id that is your wish. Therefore, your polythene is recycled and degradable. All polythene, of any size, gauge or quantity can be manufactured from recycled polythene material, if that is what you require >>>
    View the product on biodegradablebag.co.uk The Biodegradable Bag Company Ltd
    ELASTOMER COMPOSITES

    ELASTOMER COMPOSITES

    Cabot Elastomer Composites (CEC) are natural rubber/carbon black compounds made with a patented process of mixing carbon black with natural rubber in the liquid phase. Used primarily for tire and industrial rubber applications, Cabot Elastomer Composites offer many new advantages, including: Reduced rolling resistance Reduced fatigue and wear Dramatic improvement in mixing plant productivity Increased grade flexibility and minimized carbon black handling Improved cleanliness, consistency, quality and dimensional control. >>>
    View the product on w1.cabot-corp.com Cabot Plastics Ltd
    DIEHEADS

    DIEHEADS

    A full range of Dieheads are available for thermoplastic and elastomeric cable applications. The range includes single, dual and triple layer cross dieheads with provision for skinning or striping. Designed and manufactured for the highest accuracy and, for a wide range of materials, the dieheads fully compliment the Francis Shaw range of Extruders whatever the cable type. >>>
    View the product on francisshaw.co.uk Francis Shaw Wire & Cable Machinery (FSCM Ltd)
    ELASTOMER CORE MESH

    ELASTOMER CORE MESH

    Elastomer core mesh is an optimum solution for combining excellent shielding performance with a high degree of elasticity. Both qualities are guaranteed by the construction of the gasket which consists of an elastomer core with two layers knitted wire mesh. Typically, elastomer core mesh is used for doors and enclosures with low closing force as well as for sheet metal and molded enclosures. Attaching the gaskets is simply done by pressing or gluing the gasket into the groove. All dimensions shown in inches (millimeters) unless otherwise specified Product Highlights • High recovery - 95% at 50% deflection. • Variety of core materials and wire alloys • Groove or pressure sensitive adhesive mounting SHIELDING EFFECTIVENESS Transfer Impedance (500 MHz) 80 - 90 dB H-field (200 KHz) Mil 285 50 - 60 dB Plane Wave (2 GHz) Mil 285 75 - 95 dB Surface Resistivity 0.065 - 0.172 ohm/cm2 Volume Resistivity N/A Available Size Range Rectangular: 0.125 x 0.125 (3,18 x 3,18) - 1.0 x 1.0 (25,4 x 25,4) Round: 0.098 - 1.00 (2,49 - 25,4) dia Deflection Operating Range 20 - 50% Deflection. Compression Force (based on shape selection) 25 - 70 Lbs./ft. @30% Deflection. Compression Set 20% @ 50% Compression Joint Unevenness Accommodation 0.30 - 0.100 (0,76 - 2,54) Compound/Material Availability Elastomer: Neoprene and silicone sponge-silicone solid tubing. Wire: CuBe, aluminum, monel, tin plated steel Temperature Range -103 - 500°F (-75 - 260°C) Available Profiles Round, rectangular, single fin, double round with fin Mounting Methods Groove, pressure sensitive adhesive, channel mount Custom Shapes Available Yes Fluid Seal N/A Air/Dust No Galvanic Compatibility Variety of platings and wire to ensure galvanic compatibility with mating surface Typical Applications for Shielding Gaskets • Large cabinet doors - minimal force, good recovery • Hinged access openings with minimal latching force >>>
    View the product on lairdtech.com Laird Technologies
    POLYURETHANE

    POLYURETHANE

    POLYURETHANE is a unique material that offers the elasticity of rubber combined with the toughness and durability of metal. It can be manufactured in a variety of hardness's ranging from rubber band soft to bowling ball hard. Due to the versatility of polyurethane, the range of components that can be manufactured are vast. Parts made from polyurethane are proven to outwear other materials in particular when abrasion is a factor. It is vastly superior to rubber, plastics and metal in many applications. It has a higher load bearing capacity than any conventional rubber. This makes it an ideal material for load wheels fitted to fork trucks etc, heavy duty couplings, metal forming pads, shock absorbing pads, machine mounts etc. In fact it can be moulded into virtually any form given the correct moulds and tooling is used. Should you have an abrasion issue regarding machine components resulting in expensive production down time, then replacing the part or parts manufactured in polyurethane will in most cases solve the problem, thus reducing your operational costs. It is difficult to be specific on products due to the versatility of polyurethane which can be virtually moulded into any shape or component given the correct design, mould and tooling. >>>
    View the product on provincialrubber.co.uk Provincial Rubber
    POLYURETHANE

    POLYURETHANE

    Fire PerformanceThe polyurethane foam within the panels is fire retardant to BS4735: 1974. It is also classified as 'P', not easily ignitable when tested to BS476: part 5: 1979. Please note that polyurethane is combustible when exposed to flame and could contribute to the spread of fire.The Polyurethane panel is not a fire resistant panel. Insurance legislation may restrict the use of these products. Stancold accepts no liability for the suitablity of this product for your project and for insurance purposes would recommend the use of a fire rated Mineral Fibre or PIR." >>>
    View the product on stancold.co.uk/index.htm Stancold Plc
    COVERED ROLLS AND PULLEY LAGGING

    COVERED ROLLS AND PULLEY LAGGING

    We offer a complete line of elastomer compounds for original coverings or re-covering of rolls used in industry. These rolls offer: Flex Life Abrasion Resistance Elastomer to steel adhesion Wide color selection Homogenity Chemical Combatibility Food grade requirements Our hot extruded application method eliminates logitudinal seams, porosity, and ply delamination. Available in natural or synthetic elastomers including neoprene, nitrile, EPDM, SBR, polybutadiene and silicone. >>>
    View the product on weirminerals.com/weir/minerals/home.nsf/page/ProductsProduct_Brandvulco Weir Rubber Engineering Groupe - WEIR
    POLYOLEFIN - PROTEUS® O&P GRADE

    POLYOLEFIN - PROTEUS® O&P GRADE

    Thermoforming performance Used for orthotic & prosthetic applications Rigid form of polypropylene used where high stiffness is required Typical Flexural Modulus: 195,000 PSI Lot-to-lot consistency and formability Chemical- and corrosion-resistant No moisture absorption Because people come in all different shapes and sizes, orthotic and prosthetic devices must be custom fit — and that's where Proteus® O&P Grade comes in. Proteus® O&P Grade maintains the rigidity and durability required by the orthotics and prosthetics industry, while exhibiting top thermoforming performance. Proteus® O&P Grade is a "natural" color and available in 48" x 96" sheets with gauge sizes ranging from 1/16" to 1/4". >>>
    View the product on quadrantplastics.com Quadrant Epp France


    12Suivant >>Fin >
    Go to page


      Search    
     
     
     
    Search
    See all of the sector's products : Raw materials