Selection of 40 products among
216
CERAMIC TILES AND BURNERS
Industrial infrared heaters, both luminous and tube heaters, for manufacturing facilities, warehouses, sports stadiums, airport hangars, churches and livestock
Burners for conventional boilers &
condensing boilers
Burners for cookers and grills, i.e., Döner, Kebab & Gyros grills, chicken roasters, and outdoor barbecue grills
Burners for industrial processes including drying of paper, textiles or paint facilities
Domestic space heaters
Patio, terrace and outdoor heaters
Infrared stove-tops
Portable heaters for camping or barbecue
Road constructions burners, weed controlling appliances
>>>
View the product on schwank.co.uk
Schwank Ltd
CO2 INCUBATORS INCO 2
Working for people and for nature
The Memmert CO2 incubators create absolutely reliable environmental conditions for organic loads. Your decision criteria:
3 model sizes (108l, 153l and
246l)
State-of-the-art control technology based on the P performance class for all models
Humidity limit control integrated as standard for all models (active humidity control system at extra charge)
Double doors standard for all models: Prevention of contamination and drops in temperature, with at the same time an optimal view of the sensitive load through wide-area interior glass doors
For all models, the working chamber, including the ventilation system, the water trays and all sensors, can be sterilised in a 4-hr programme at 160 °C using the standard STERICard
For the INCO 2, the tried and tested Memmert heating concept was again perfected: heating the working chamber from all six sides, along with the electronic humidity limit control, is decisive in preventing condensation from forming in the working chamber. An aluminium thermal conduction layer supports the optimal temperature uniformity, and serves as a heat accumulator if there is a temporary power failure. The turbulence-free interior ventilation ensures a constant and uniform atmosphere.
With the help of our model selection you can find the right model for your needs, with dimensioned model sketches and extensive technical data for download. We are convinced that the flexibility and technical features of our appliances meet all possible needs. Put us to the test!
60 years of permanent development work, as well as numerous amounts of feedback from practical experience are embodied in each of our appliances:
The modular manufacturing concept in accordance with the principle of equal parts enables a highly varied and cost-effective series production
Almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
A wide range of options for programming and documentation using interfaces, Celsius software, integrated log memory and chip cards
CO2 incubators are safety-tested and bear the sign
>>>
View the product on memmert.com
Memmert
CT-SERIES HIGH PERFORMANCE TEMPERATURE CHAMBERS
CT-Series temperature chambers are high performance test chambers with fast change rates up to *25°C for accelerated stress testing. Each chamber is tailored to meet your performance criteria with
high volume airflow, large horsepower compressors, and optional LN2 cooling. Explosion-proof chambers are also available to meet Class 1, Div. 1 or Div.2, and type D standards. These chambers offer heavy-duty construction and even more performance options while maintaining the precise temperature and humidity control essential for product testing today.
Features & Benefits:
* CSZ EZT-560 Touch Screen Controller is designed to save chamber programming and setup time. Removable USB I-stick simplifies access to profile, alarm, and audit trail files.
* RS-232/485 serial communications and Ethernet connectivity offer a selection of communications options
* EZ-View software allows user to control and monitor up to 20 chambers from any location
* Fog-free viewing window and interior light makes viewing workspace hassle-free
* High Performance with fast change rates for accelerated stress testing
* Customizable to meet your specific test requirements
* Durable chamber construction for dependability and longer life
* Energy savings provided through a bi-modal heating and cooling system that saves energy and eliminates the need to override the cooling system with an excessively large heating system
* Chamber construction provides customers with the flexibility to incorporate both left and right side ports in addition to ports in the top of the chamber for easy integration with your test device
* Fully welded ports and shelf pilasters eliminate potential leaks, increasing the life of your chamber
* Humidity water filtration system is included to filter impurities and protect your chamber interior
* An electronic humidity sensor is used on all humidity models for accuracy and minimal maintenance
>>>
View the product on cszindustrial.com
Cincinnati Sub-Zero
QADS™ - AUXILIARY AIR MOVEMENT SYSTEM
Saves time, energy and money
on paint drying and curing
Speed without compromising quality
QADs™ is an innovative and internationally patented Junair system that supplies additional air flow from
the corners of the spraybooth cabin. The clean, filtered and heated air provided by QADs™ creates the ideal environment for the fast, controlled flash off of waterborne base-coats and the rapid through curing of low VOC top coats.
The disruptive airflow from the QADs™ nozzles, together with an elevated air temperature accelerates the evaporation of water from the paint coating. Unlike some other systems, QADs™ covers the whole vehicle in one operation ensuring consistent drying of waterborne base-coats.
Unrivalled performance on the curing cycle
Conventional spraybooths are inefficient in raising the lower panels of a vehicle to the required curing temperature. This is because warm air rises to the top of the cabin whilst cooler air descends to floor level. Also, the air passing over the lower panels has already been cooled by the substrate above. Differences of 10-15°C are not uncommon in conventional booths, leading to extended baking times, taking up more valuable booth time and energy.
Heated air from QADs™, however, envelops the whole vehicle including the lower panels, ensuring that the recommended temperature is achieved quickly. On most spraybooth ovens QADs™ will achieve the lower panel temperature of 60°C within 10 minutes, specified by many of today’s motor manufacturers. It is no coincidence that QADs™ are exported extensively worlwide
>>>
View the product on junair.co.uk
Jun-Air (UK) Ltd
ATOMIC LAYER DEPOSITION (ALD) TOOL - FLEXAL®
Oxford Instruments’ FlexAL product family provides a new range of flexibility and capability in the engineering of nanoscale structures and devices by offering remote plasma atomic layer deposition
(ALD) processes and thermal ALD within a single system to deliver:
Maximum flexibility in the choice of materials and precursors
Low-temperature processes enabled by plasma ALD
Low damage maintained by the use of remote plasma
Controllable, repeatable processes via recipe-driven software interface
Processes
Standard processes available on the FlexAL systems include:
Al2O3 remote plasma process - down to room temperature deposition
HfO2 high-k dielectric remote plasma process
HfO2 high-k dielectric thermal ALD process
TiN remote plasma process
Unique system benefits
Ability to handle from small wafer pieces up to full 200 mm wafers
Load-locked wafer entry for safety, low particle count and short loading-to-process-start time
Unique precursor delivery system offering precise precursor temperature control with fan-assisted oven and optimised heated delivery lines
Integral glove box on precursor modules for in-situ change-over
Integral ports to allow the addition of in-situ ellipsometry measurement tools.
Fits in compact space of less than 2 x 2 m even with maximum number of precursor modules
May be integrated in cluster system with other process tools, including Oxford Instruments Plasmalab®System100 range of etch and deposition tools
Backed by Oxford Instruments' global sales and support network; with platform technology based on the popular PlasmalabSystem100 process tool, the FlexAL product family benefits from proven reliability in over 300 installed systems worldwide
Developed in consultation with leading atomic layer deposition (ALD) experts in Europe, Korea and USA
Licensed technology from ASM International NV
Product range
The FlexAL atomic layer deposition tool is available as:
FlexALRPT offering both remote plasma and thermal ALD in a single system to provide a wide choice of precursors and processes
FlexALRPX offering the widest range of precursor options within both remote plasma and thermal ALD, having the maximum number of precursor delivery modules and deposition temperatures up to 700 ºC
FlexAL remote plasma atomic layer deposition (ALD) tool
100% conformality of 80 nm thick Al2O3 film deposited by remote plasma ALD in 2.5 µm wide trenches with an aspect ratio of 10:1. Courtesy of Eindhoven University of Technology and Philips Research
>>>
View the product on oxford-instruments.com
Oxford Instruments
