Test benches - All suppliers - Benches of test - benches try - machines test - machines try - systems test - systems try - bench test - bench try - scheme test - scheme try - system
Search   


  • Laboratories > Testing and inspecting equipment > Bancs d'essai de laboratoire (translation in progress) > Explosion tests
  • Laboratories > Testing and inspecting equipment > Bancs d'essai de laboratoire (translation in progress) > Corrosion tests
  • Laboratories > Testing and inspecting equipment > Bancs d'essai de laboratoire (translation in progress) > Sterility tests
  • Laboratories > Testing and inspecting equipment > Bancs d'essai de laboratoire (translation in progress) > Light tests
  • Laboratories > Testing and inspecting equipment > Bancs d'essai de laboratoire (translation in progress) > Magnetoscopics
  • Laboratories > Testing and inspecting equipment > Bancs d'essai de laboratoire (translation in progress) > Inspection equipment
  • Laboratories > Testing and inspecting equipment > Chambres anéchoïques (translation in progress)
  • Laboratories > Testing and inspecting equipment > Control and testing cards

See all sector categories "Laboratories"

View associated products
Testing and inspecting equipment
Control and testing cards
Chambres anéchoïques (translation in progress)
Test benches
Bancs de contrôle de qualité (translation in progress)
Bancs d'essai de laboratoire (translation in progress)
Cell culture
Science de la vie (translation in progress)
Stérilisations de laboratoire (translation in progress)
Biologie en laboratoire (translation in progress)
Appareils d?expérimentation d?échantillon (translation in progress)
Documentations pour laboratoires (translation in progress)
Life sciences analyses
Équipements de laboratoire (translation in progress)
Optical equipment
Liquid manipulation
Air systems
Protection in laboratories
Sample management
Services
Outils d?expérimentation de laboratoire (translation in progress)


Test benches :

38 products Flux RSS
RAIN AND DUST CHAMBERS - DUST TEST CHAMBER TYPE ST 1000

RAIN AND DUST CHAMBERS - DUST TEST CHAMBER TYPE ST 1000

According to DIN VDE 0470 T1 or EN 60529 for testing of the protection classes IP 5 X and IP 6 X. The ingression of dust into enclosures is tested. The systems can be equipped with an underpressure device so that the dust not only settles on the entire specimen but can also ingress into the specimen. Main features: # Waste air exhaust via dust filter # Abrasion resistance of all components in contact with the dust # Transparent doors for easy charging, surrounding special gaskets # Dust collecting section below the test chamber # Wiper # Vertical air flow Technical specifications: Test space volume 1.000 l Test room lighting Mobile design Ports 50 and 100 mm Ø >>>
View the product on wut.com Weiss Umwelttechnik Gmbh
ACCIDENT INVESTIGATION INSTRUMENT - SKIDMAN

ACCIDENT INVESTIGATION INSTRUMENT - SKIDMAN

SkidMan is the most up to date and versatile instrument available for brake and skid testing, road traffic accident investigation and reconstruction, and vehicle safety inspections. It is portable, easy to use and produces a hard copy of the test results on a built-in printer. SkidMan was developed in conjunction with the South Yorkshire Police Authority. • Cost effective tool for accident investigation and reconstruction • Widely used by UK police forces • Can be used single handedly, reducing test and investigation costs • Links directly to SkidCalc Accident Investigation calculator >>>
View the product on turnkey-instruments.com Turnkey Instruments Ltd
APPARATUS - DIGITAL TRITEST 50 LOAD FRAME

APPARATUS - DIGITAL TRITEST 50 LOAD FRAME

Microprocessor controlled. ¦ 11,200 lbf. (50 kN) maximum load capacity. ¦ Fully variable loading speeds from 0.399999" (9.99999 mm) per minute to as low as 0.000001" (0.00001 mm) per minute. ¦ Large LCD screen display with touch-sensitive keypad. ¦ Rapid approach and return of platen to set datum point control. The new Digital Tritest 50 provides the geotechnical testing laboratory with a modern and versatile triaxial load frame to meet current and future laboratory testing needs. Benefiting from the latest in microprocessor technology, the Digital Tritest 50 is capable of applying test loads up to 11,200 lbf. (50 kN) at any test speed within the range of 0.399999" (9.99999 mm) per minute to as low as 0.000001" (0.00001 mm) per minute. The Digital Tritest 50’s unique drive system performs with virtually no vibration as the test loads are applied, regardless of the testing speed selected. All load frame functions — including speed selection, loading and unloading, rapid approach and return, along with additional mode selections for setting datum points or remote computer operation — are easily accomplished by the loader’s new LCD display and keypad system. >>>
View the product on eleint.co.uk ELE International Ltd
SHIELDING - HYPER-SHIELD

SHIELDING - HYPER-SHIELD

The 'Hyper-Shield' door is a 2 knife system with 4 finger stock seals, the twin door skins form the mating knives for high magnetic performance.Although the doors are very high in performance they are easy to use as bearings reduce the mechanism friction and precision 'knife to finger stock' alignment reduces mating drag. Other aspects of the 'Hyper-shield' system are:Honeycomb vents constructed 2steel layers set at 90 degrees dip soldered into a steel frame for extra high performance.Only very high specification filters are used.Only precision 'N' type coax ports are used (adapters are used to convert to other coax types)Only precision cassette fibre optic ports are used (>110dB@18GHz) >>>
View the product on global-emc.co.uk Global EMC
UV CONDENSATION WEATHERING DEVICE - UV2000

UV CONDENSATION WEATHERING DEVICE - UV2000

The Atlas UV2000 is the perfect screening device for testing the effects of the sun`s energy on your material easily and affordably. Innovative design features improve test reproducibility and lower operating costs while testing coatings, plastics, pigments, adhesives, textiles and other materials for their reaction to UV light, temperature and moisture. The UV2000 meets or exceeds test requirements for ASTM, DIN, ISO, JIS and many other industry standards and requirements. Features Intuitive Touch screen and display: four preset standard and two user configurable test programs for simple error-free operation Irradiance control: four SmartLight monitors for controlling irradiance reside externally so irradiance control is not affected by chamber temperature Irradiance calibration: the optional hand-held, wireless irradiance calibrator quickly connects to the UV2000 without opening the door or interrupting the test cycle Temperature control: Atlas Black Panel temperature control provides precise temperature control throughout every test cycle Condensation Cycle: water vapor to create condensation is produced by a heating reservoir located in the bottom of the test chamber Dual safety (hardware and software) for quick shut off of main control due to the door opening Low water level alarm Net Weight: 129 kg (285 lbs) Gross Weight: 222 kg (490 lbs) 23) 3” x 12” specimen holders including one black panel and (46) 3” x 6” aluminum panels for simplified mounting of specimens; individual holders can mount directly to the UV2000 without a specimen rack Set of four casters Exterior Dimensions: H: 155 cm (61 in.) W 135 cm (53 in.) D 51 cm (20 in.) >>>
View the product on atlas-mts.com Atlas Material Testing Technology
SELF ALIGNING INTEGRAL STIRRER DRIVE

SELF ALIGNING INTEGRAL STIRRER DRIVE

The integral hinged design permits full access to the reactor lid and ports, ensuring the quick and easy removal of the lid and stirrer guide Correct stirrer alignment is assured every time, with no requirement to align the stirrer motor between procedures, saving valuable time in setting up new experiments Low profile drive mechanism reduces the overall height of the unit to ensure that Lara™ will easily fit into a standard fume cupboard >>>
View the product on radleys.co.uk Radleys
AUTOMATIC TESTING MACHINE - SARA2

AUTOMATIC TESTING MACHINE - SARA2

The automated SARA2 SAR assessment system makes single position full compliance measurement scans in as little as 10 minutes. And test set-up is easy. SARA2's upright phantom requires less time to prep, less fluid to fill, and a lot less under-the-table gymnastics for EUT adjustment. Key FeaturesAutomatic Report Generation Automatic SAR Maxima Detection Complete Scans in 10 Minutes or Less Easy Intuitive Software Full Compliance Measurement for all Standards - IEC TC 106 62209 Part 1 (draft) - EN 50631:2001 - FCC OET 65 Supplement C - IEEE 1528 Measurement up to 6 GHz DescriptionYou don't have to sacrifice full compliance for speedy test results. SARA2 measurements can be used for final data submission and complies with all present SAR standards. SARA2 generates the reports you need for filing: SAR maxima identification for each device position, configuration and operational mode; all information necessary for the interpretation of test and/or calibration results; and all information required by the method used. SARA2 is the smart way to test. Advanced technology is used throughout. For example, the phantom volume is laser digitized so the system knows where the probe tip is at all times. Other systems require establishing a vector position at each measurement point, slowing the test process. And SARA2 uses a fast amplifier for the probe signal, with a 2 ms response time. That allows direct reading of values instead of correlation tables, and increases sensitivity for pulsed waveforms like GSM. ETS-Lindgren is the North and South American Technical Support and Distribution Center for products made by IndexSAR Ltd. MapSAR and SARA2 are trade names of IndexSAR Ltd. The SARA2 Advantage Less Liquid ManagementMost SAR systems use the form of a bisected phantom head in a "flat bath" configuration similar to a kitchen sink. The "sink" is the hollow form of the bisected phantom (with a portion of the upper torso), filled with glycol solution that simulates human tissue. The EUT (i.e. a wireless handset) is placed under the pan, and a probe mounted on a robotic arm is lowered into the solution for measurements. The disadvantages of this method are: Boundary issues at the surface of the pan do not allow the entire phantom to be scanned. Up to 20 or more liters of glycol mixture are required for each pan. Standards require a different glycol mixture for each frequency tested: pans must filled and drained repeatedly. Settling time is required between fills. The large surface area of the pan encourages contamination, evaporation and stratification of the glycol mixture, effecting measurement accuracy. Evaporating glycol mixture can cause nausea (full tests require several hours). The EUT is placed under the pan, near the floor, requiring awkward bending and stooping. SARA2 is a simpler more sensible way to make SAR measurements. Instead of a large pan, a compact upright phantom is used. The phantom is filled with the same glycol mixture*, but with only a third of the volume used by a pan. A small diameter opening at the top of the phantom (used for probe access) minimizes evaporation. And when it's time to test at a new frequency, a second upright phantom with the correct solution can be switched in place. The upright phantom speeds testing because there is none of the liquid management problems pans have. And, it's much easier to position a EUT correctly on an upright phantom than bending and stooping under a fluid filled pan! Not only is the upright phantom method easier, faster, and more efficient, it's approved for full compliance measurement. >>>
View the product on ets-lindgren.co.uk Ets Lindgren
HYDRO SWINGERS - HSC

HYDRO SWINGERS - HSC

Product Features For dynamic torsion tests Torque up to 500 000 Nm Frequencies up to 70 Hz Accuracy greater than 0.1% High rigidity Long product life Design and Function The Hydro Swinger HSC is a hydraulic rotary cylinder built according to the swivel vane principle. The vane shaft is hydrostatically suspended at all directions, so that the friction between the moving parts is limited to pure viscous friction. This enables very dynamic changing of the torsional loads, and guarantees a long product life. Due to the hydrostatic suspension and the high stiffness, achieved through a small oil volume, highly accurate mesurements can be attained. The coupling flange is attached without clearance to the shaft ends with a 1:50 tapered, using an oil interference fit assembly. This guarantees extremely stable component connections, without any slack and therefore no galling. Models The Hydro Swinger HSC is available in a variety of standard sizes. Special models for high pressure ranges and special sizes are available upon request. >>>
View the product on gat-mbh.de/ Gat France
BRAKE TESTER WITH PRINTER - BRAKESAFE

BRAKE TESTER WITH PRINTER - BRAKESAFE

For all road going vehicles, BrakeSafe is the ideal choice to test and monitor the brake performance of your fleet after servicing. As easy to use as a Tapley meter, it also produces a printout for your quality assurance records. • Accepted by the Vehicle Inspectorate for MOT Testing • Tests all types of road going vehicles • Portable and easy to use • Self contained, no external connections required >>>
View the product on turnkey-instruments.com Turnkey Instruments Ltd
APPARATUS - TRI-FLEX 2 MASTER CONTROL PANEL

APPARATUS - TRI-FLEX 2 MASTER CONTROL PANEL

Three independent channels of pressure control. ¦ Digital pressure display system to an accuracy of ± 0.25% of reading within range. ¦ User-friendly burette system. ¦ Easy removal of burette/annulus assembly for cleaning. ¦ Bridging feature to set multiple burette pressures with one regulator. ¦ Quick disconnects for easy system setup. ¦ Easily expands for multi-cell test. Straightforward in design, the Tri-Flex 2 Master Control Panel meets the demands for an accurate, yet simple-to-operate panel system for use in triaxial and permeability testing.The panel is easy to operate, with a limited number of controls and an easy-to-read digital pressure display system. Fast, easy connection and removal of additional system components allow quick system setup. The operator has complete control of system pressure and flow measurements during specimen testing, with three independently-controlled pressure regulators — one for confining or cell pressure; one for lower or pore/head pressure; and one for upper or back/tail pressure.The bridging feature lets the operator quickly set the pressures of multiple burette systems with just one regulator. Each burette/annulus assembly has a selector which opens or closes the access to the annulus.When opened, up to 400 ml of water is available to the operator for specimen saturation and other test stages without refilling the burette assembly. By a simple flip of a switch to activate the digital pressure display system, any of the regulated pressures can be displayed in digital form to an accuracy of ± 0.25% of reading within range. The Tri-Flex 2 Master Control Panel is designed in full compliance with ASTM and AASHTO specifications for use in the application, monitoring and data recording of test conditions. >>>
View the product on eleint.co.uk ELE International Ltd
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Laboratories