Selection of 40 products among
67
FOAMSERT DOUBLE ENDED - SELF TAPPING BRASS INSERTS
The most significant additional features of the Foamsert compared to the Trisert are the larger external diameter, length and coarse truncated external thread form.
Three equidistant cutting
flutes, over the length of the external form, give a more balanced cutting load than other forms of self-tapping insert. The cutting action takes place at a larger number of points on the thread form over the length and circumference of the insert.
Lead on both ends allows the insert to be installed either way up, therefore, where the volumes dictate that bowl feeding equipment is required, it is not necessary to incorporate complex flighting systems to orientate the insert, which makes bowl feeding simpler and reduces tooling costs.
Free running internal thread due to there being no interruption to the internal thread, as the external longitudinal flutes produce the cutting action during installation.
Reduced outward stress – During the installation process the cutting action of self-tapping inserts results in slight outward stress. This is reduced to an absolute minimum with the Foamsert and enables the insert to be used where there are thin walls.
Improved axial alignment – The balanced cutting load of the Foamsert reduces side thrust caused by predominantly only one cutting edge. This has the effect of guaranteeing much closer axial alignment of the insert in the hole.
>>>
View the product on tappex.co.uk
TAPPEX
ANCHOR® - RIVET BUSHING THREADED INSERT
The Anchor rivet bushing is a threaded insert made of steel or rustproof material, brass or light alloy with a counterbored and serrated shank.
Anchor is riveted into thin-walled moulded parts with
pre-punched receiving holes. During this process, the riveted serrations of the shank cut into the side wall, creating an absolutely secure fastening.
The special shape of the shank and the countersinking at the bottom protect the thread from damage during installation. In almost all application cases, overload testing indicated that Anchor remains firmly seated even if the thread is completely overtorqued.
Fields of application:
Anchor rivet bushings enjoy universal application, offering a wide variety of design possibilities: for hardwearing screw connections in the automotive industry, for reliable fixture of highly sensitive electronic parts etc.
Product features:
• Anchor is torque-resistant and capable of loads applied from both sides.
• Anchor can be used in surfacetreated, ready-plated parts, so eliminating the need for time-consuming cleaning of internal threads and reworking damage at the surface.
• When turning in the screw, it is impossible for the Anchor to be forced out of the hole. This saves incalculable time losses.
• The Anchor thread is clean, true to gauge and is wear-resistant. It has a precisely fitted centered seat without the need to use templates or other positioning devices.
Specifications:
Works standard sheets 701 to 758,
On request:
Special Anchor-S with screw lock
TufLok in the internal thread. The captive plastic support serves as a safeguard against the screw working loose of its own accord.
Also available: Special Anchor-D with sealing agent precote 5 on the contact surface.
>>>
View the product on kerbkonus.de
Kerb Konus
PILOTED SPINDLE TAPPER
Walton's Piloted Spindle Tapper is used for threading a drilled hole manually at one machine location, without moving the workpiece. This tapper is better than a handheld tap wrench for a number of
reasons:
Separate stands, guides or similar devices are not needed. The tap follows the correct lead, assuring true alignment.
Accurate threads are produced because this tapper makes it easy to hand tap a hole in the same alignment as the drilled hole.
Thread quality is improved while reducing tap breakage.
It is inexpensive, highly efficient and extremely simple to use.
Features:
During tapping operations, the spindle of the drill press serves as support for the guide post of this tool. The drill press spindle may also be used to raise or lower the tap, holding it in a lifted position while the work is shifted and centered.
The centerline of the tap and the centerline of the drilled hole will be identical, as the same machine spindle is used for both operations
Our Piloted Spindle Tapper allows the tap to be fed into the workpiece with two-hand or fingertip control, affording a more sensitive feel and reducing tap breakage.
Held true in a lathe or drill press chuck, the Piloted Spindle Tapper is supported and aligned while being turned by hand.
>>>
View the product on waltontools.com
Walton
EDGE SANDING MACHINE LZK 3/3,3/1
Standard:
*Electromotive oscillation with robust and lubricationfree gear box
*Solid, with plastic strips covered sanding table vertically adjustable for utilisation of the whole belt width
*When
the sanding beam is inclinated, the stop rules pivot and may be opened
*Three-side usable aluminium sanding shoe with easy changeable graphite belt
*Veneer edge sanding device with precise adjustment, therefore also suitable for most thin veneers
*Spring-loaded belt tension, therefore automatic compensation of belt length differences
*Miter end stop with infinitely angle-adjustment and adjustable ruler
Options:
*Interchangeable rubber coated discs 65 mm or 90 mm with suitable exhaust plates
*Revolver with rotary exhaust plate
*Motor with 2 speeds
*Grooved stop fence
*Putable table extention (approx. 200 mm) – standard
*Putable conveyor belt incl. holding down equipment
*Putable table extention (approx. 200 mm) with hinged roller-conveyor, suitable for feed table
*Electrical speed regulator from 2 upto 6 m/min CEE-Plug socket for feed unit
*Bracket for feed unit
*Moveable chassis
Technical Data:
motor power: 2,2 kW
Speeds of Belt: 20 m/sec.
Belt dimension: 2600 mm x 150 mm
Table size – front sanding station: 1000 mm x 300 mm
Table size of radii sanding table: 400 mm x 200 mm
Vertical adjusting range: 150 mm
Total weight approx.: 250kg
Required space approx.: 1650 mm x 900 mm
>>>
View the product on langzauner.at
Langzauner
EDGE SANDING MACHINE LZK 4
Standard:
*Solid stand therefore vibrationless working
*Sanding unit slwable to any position between 0 and 45 degrees
*When the sanding beam is inclinated, the stop rules pivot and may be
opened
*Miter end stop with inifinitely angle-adjustment and adjustable ruler
*Solid, with plastic strips covered sanding table (1.250 mm x 350 mm)
*Vertically adjustable sanding table for utilization of the whole belt width
*Exchangeable contact discs
*Veneer edge sanding device with precise adjustment, therefore also suitable for most thin veneers
*Three-sided usable aluminium sanding shoe with easy changeable graphite belt
*Electromotive oscillation with robust and lubricationfree gear box
*Spring-loaded belt tension, therefore automatic adjustment of belt length differences
Options:
*Rubber coated discs 65 mm or 90 mm
*Revolver with rotary exhaust plate
*Motor with 2 speeds
*Grooved stop fence
*Putable conveyor belt incl. holding down equipment
*Putable table extention (approx. 200 mm) – standard type
*Putable table extention (approx. 200 mm) with hinged roller-conveyor, suitable for feed table
*Electrical speed regulator from 2 upto 6 m/min
*Bracket for feed unit
*Moveable chassis
Technical Data:
Motor power: 3 kW
Belt speed: 22 m/sec.
Belt dimension: 3000 mm x 200 mm
Table size: 1250 mm x 350 mm
Vertical adjusting rang of the sanding table: 200 mm
Size of radii sanding table: 400 x 400 mm
Total weight: 450kp
Floor space required: 1900 mm x 900 mm
>>>
View the product on langzauner.at
Langzauner
