Selection of 47 products among
79
ALUMINIUM CLAD - PLASTIC WINDOWS PTP, PTP-V
Description
PTP - completely new window. A unique product of its kind with combined aluminium-PVC construction. Product designed for use in rooms with increased level of humidity, ie. bathrooms or
kitchens. The window can also be used in rooms where the occupier expects to have white, easy to clean roof window.
PTP window has a completely new construction:
modern frame and sash
innovative hardware
new handle
new tightening system
Some of the solutions are patented.
PTP window is a centre pivoting roof window, made of multi-chamber PVC-U profiles in white and reinforced with steel profiles. Such construction ensures a very good stability and protects profiles against deformation. In the window, there also a new aluminium profile used, holding down glass. The profile matches perfectly with the window's exterior and ensures the product's durability.
The window is durable, corrosion and other weather factors resistant, and requires minimum maintenance. The material the window is made of does not absorb any humidity and exhibits a high resistance to acids and alkaloids.
Glazing
PTP roof window is glazed with a thermo-insulating IG unit, using "warm" TGI spacer. The IG unit consist of 4H-16-4T, with an external toughened pane and an internal Low-E pane with U-factor = 1,0 [W/m2K] according to EN 674.
Seals
PTP roof window has a triple tightening system; clinging seal, border seal and also a seal in the profiles covering the frame sides.
Handle
New, white handle located at the bottom part of the sash allows easy operation of the window and also contains a two step ventilation system.
Aluminium profiles
Externally the PTP window is covered with aluminium profiles, both sides covered with polyester coating, making them more durable and weather resistant. Trapezium shaped profiles are made of aluminium 1.0 mm thick, which results in higher durability of the aluminium elements, and better resistance to mechanical or transportation damage. Externally the PTP window does not differ visually from wooden windows.
Accessories
A wide range of accessories is available for the window, internal as well as external, and are fitted to PVC profiles with screws. As the shape of the main profiles is similar to those in FAKRO wooden windows, the accessories fitted to window sash are identical both for wooden and aluminium-PVC windows.
Installation
The window is suitable for roofs with pitches between 15° and 90° complete with flashing. Each window comes with pre-fitted installation brackets to facilitate installation on trimmers in a roof construction. PTP window installation does not require any additional skills from the roofers, because it does not differ in any major way from wooden roof windows installation.
>>>
View the product on fakrogb.com
Fakro GB Ltd
WINDOW - FIXED LIGHT
DESIGN BENEFITS
Powder coated aluminium clad version available in any or the RAL colours. Such cladding makes the window virtually maintenance free, certainly comparable to uPVC.
Has achieved BS7950
'Secure By Design' accreditation.
Can be painted or stained externally with one colour, with an alternative colour used internally. A natural wood finish is often used internally so as to blend with the natural wood sill or floor. See Fully Reversible for duotone windows.
All windows are manufactured in 5mm increments, so a design is not compromised by the standards set by other window manufacturers
Glazing bars can be supplied as externally positioned powder coated aluminium, or painted/stained timber
All frames, of any type of window, have a 20mm deeper top frame to allow for trickle ventilators
WINDOW SIZES
These sizes are for the structural opening dimensions.
Width Height
Minimum 500mm 500mm
Maximum 2400mm 2100mm
The minimum sizes are as stated, but there is greater room for flexibility on the maximum size depending upon whether triple or double glazing is required, the number of sashes, and the use and positioning of the window. Our free technical service is here to help you, please contact us with the details of your enquiry so that we can respond immediately.
NOISE ATTENUATION
These figures are for a standard window specification.
Cars travelling at an average of 50hm/h within a city environment 29.9dbRW +ctr
Cars travelling at an average of 90hm/h within a city environment 33.6dbRW +ctr
For schemes where noise attenuation is of major importance, a '2+1' window is available which can achieve levels of up to 45dB. For information on this window, please click here to go to Low Noise.
U VALUES
The values are measured in values of w/m2K, and are for the entire frame, and not purely for the glass.
Standard Glass 1.9
Plus Low E Glass 1.5
Plus Low E Glass & Argon (Basic Specification) 1.3
Plus Low E Glass, Argon
and using Warm Edge 1.2
Plus 2* Low E Glass, Argon
and using Warm Edge 1.1
>>>
View the product on swedishtimberproducts.co.uk
Swedish Timber Products
WINDOW - FULLY REVERSIBLE
DESIGN BENEFITS
As the sash is hinged and supported on both sides, this allows larger than normal openings to be considered. In view of the superior technology, it is our view that a Fully
Reversible window is always preferable to a Top Hung.
Powder coated aluminium clad version available in any or the RAL colours. Such cladding makes the window virtually maintenance free, certainly comparable to uPVC.
Fully comply with BS7950 'Secure By Design' accreditation.
Can be turned 180 degrees to facilitate cleaning of the outside pane. As all sash movement is external to the frame, this results in no damage to curtains, blinds or objects on the sill.
Can be painted or stained externally with one colour, with an alternative colour used internally. A natural wood finish is often used internally so as to blend with the natural wood sill or floor
A safety restrictor is built into the hinges as standard, which initially restricts movement to the first 100mm of opening (for windows taller than 600mm).
Ideal choice for multi-storey building where cleaning and painting present Health and Safety issues.
WINDOW SIZES
These sizes are for the structural opening dimensions.
Fully Reversible Width Height
Minimum 500mm 500mm
Maximum 1800mm 1500mm
Top Hung Width Height
Minimum 500mm 500mm
Maximum 1600mm 800mm
The minimum sizes are as stated, but there is greater room for flexibility on the maximum size depending upon whether triple or double glazing is required, the number of sashes, and the use and positioning of the window. Our free technical service is here to help you, please contact us with the details of your enquiry so that we can respond immediately.
NOISE ATTENUATION
These figures are for a standard window specification.
Cars travelling at an average of 50hm/h within a city environment 29.9dbRW +ctr
Cars travelling at an average of 90hm/h within a city environment 33.6dbRW +ctr
For schemes where noise attenuation is of major importance, a '2+1' window is available which can achieve levels of up to 45dB. For information on this window, please click here to go to Low Noise.
U VALUES
The values are measured in values of w/m2K, and are for the entire frame, and not purely for the glass.
Standard Glass 1.9
Plus Low E Glass 1.6
Plus Low E Glass & Argon (Basic Specification) 1.3
Plus Low E Glass, Argon
and using Warm Edge 1.2
Plus 2* Low E Glass, Argon
and using Warm Edge 1.1
>>>
View the product on swedishtimberproducts.co.uk
Swedish Timber Products
SUBMERSIBLE LIGHTING - SHUTTLE
Gardens Swimming Pools Ponds Fountains Acquariums Alleys Walls
Innovative lighting fitting, for versatile indoor, outdoor and under-water use (max. 1,5m). Body in die-cast aluminium, with steel
bracket. Painting in black, orange-peel metallized grey and white colour, made by means of polyester powders. Tempered glass, 3 mm thick, heat-proof. Outside bolts and screws in inox steel. Silicone gaskets. Silicone cable type H05 SS-F, 2,5 m length, which can connect the fitting to the terminal of the remote gear-box (not supplied). Brass cable gland. Insulation class III for very-low voltage versions (12V) with ceramic lampholder type GU5.3 and lamp's anti-loss spring. Fitting IP 68 suitable for under-water use. Insulation class I for 230V versions with ceramic lampholder type GU10 and lamp's anti-loss spring, insulation class III for LED versions for 24V DC. LED yellow colour. IP 65 lighting fitting not suitable for under-water use.
>>>
View the product on lanzini.it
Lanzini
