Selection of 43 products among
74
SOFTWARE - CANAPE 6.5
Measurement, Calibration, and Diagnostics of ECU's
CANape is a versatile tool ideal for ECU development, calibration, diagnostics and measurement data acquisition.
Features and Advantages
The
primary usage area of CANape is the optimal parameterisation (calibration) of ECU's. During the system's runtime, parameter values are calibrated and measurement signals are acquired simultaneously. The physical interface between CANape and the ECU is implemented over the CAN bus using CCP (CAN Calibration Protocol), its successor XCP, or the KWP2000 diagnostic protocol. CANape with its integrated Diagnostic Feature Set offers the range of functions of a full-fledged diagnostic tester. Standards were utilized in designing CANape , and this makes it an open and flexible platform for all phases of ECU development.
Functions
The basic functions of CANape include:
Time-synchronous acquisition of measurement data using CCP, XCP, also via CAN, LIN, and FlexRay, plus via extensive external measurement equipment
User-friendly real-time calibration via CCP and XCP
Efficient offline calibration
Flashing of binary files
Diagnostics seamlessly integrated via KWP2000 and UDS
Powerful calibration data management for comparing, merging, and flashing parameter sets
Integrated MATLAB/Simulink models enable calculation during the measurement or in offline analysis
Environment recognition synchronous to measurement data utilizing video, audio, and GPS
Application Areas
CANape is the versatile tool for the development, parameter calibration, and diagnostics of electronic control units. All tasks in this general field can be solved reliably and in a user-friendly way using CANape: Functional development of the software, test bench applications with the ASAM MCD3 interface, test drives for trials, data logging, ECU and vehicle diagnostics, and verification of object recognition algorithms with the Advanced Multimedia Option.
Sample configuration of CANape with various display elements.
CANape can also be used as a diagnostic tester.
The CDM Studio offers extensive possibilities for managing parameter sets. Saved parameter sets can be analyzed, compared, mixed and also be flashed into the ECU.
Measurement Data Acquisition
Using the measurement and calibration protocols CCP and XCP, CANape acquires ECU-internal measurement variables synchronous to ECU operation. The measurement data of the ECU's are recorded synchronous to other measurement data (from the CAN, LIN, or FlexRay bus, GPS, audio, video, or other measuring devices) and can be displayed in a variety of ways.
Features of measurement data acquisition in CANape include:
Several different window types and user-defined panels for graphic display
Virtual signals calculated online from logical relationships between real variables from diverse sources with help of internal script language or MATLAB/Simulink models
Import and export functions for measurement files
Wide variety of triggering options for targeted data logging including pre-trigger and post-trigger times (also for audio and video)
Synchronous acquisition of arrays, characteristic curves, and maps
Evaluation of Measurement Data
CANape offers a multitude of user-friendly options for editing and evaluating the measurement data of earlier measurement runs:
Study of signal responses with any desired level of detail using zoom and search functions and measurement cursors
Signals can be displayed over a time axis or in XY representation
Comments and macros may be added for offline analysis
Arithmetic evaluations using the integrated programming language and/or MATLAB/Simulink models
Use of customizable print templates
Calibration/Parameter Setting
Value displays are specially adapted to specific types of parameters. Values are either displayed alphanumerically or the user may choose graphic representation for characteristic curves and maps. User-defined panels may also be created and used to display and set parameters. The following parameter-setting functions are provided:
The user sets parameter values online in the ECU's memory or offline in CANape's mirror memory. The offline mode allows the user to set ECU-specific parameters without being connected to the ECU, either before or after a measurement run.
Parameter setting in parallel to measurement data acquisition
Flashing of binary files and parameter sets
Flash kernels are available for many controller types
A parameter set of parameter values valid at the given measurement time can be generated from the measurement file
Database Editors
Different editors are supplied with CANape so that the user can professionally edit the various description files or view them:
Simple creation of the ECU description file in the ASAP2 Editor
Editor for viewing CAN, LIN, and FlexRay description files in DBC format
Editor for viewing LIN description files in LDF format
CANdelaStudio View for viewing CANdelaStudio diagnostic description files
Calibration Data Management (CDM Studio)
The integrated CDM Studio manages parameter sets. A parameter set contains the values of those parameters that are specified in the ECU description file, whereby CANape offers the following functionality:
Parameter sets are saved in symbolic, address-independent parameter set files. This ensures that they can be processed independently of the ECU program level at which they were created.
Visualization and editing of the contents of parameter sets
Multiple parameter sets may be opened simultaneously so that they may be compared, summarized or edited.
Flashing of parameter sets
Support of the XML-based PaCo format, so that supplemental meta-information can be saved for each parameter value, e.g. author, date, and comments
Server-based Calibration Data Management with eASEE.cdm
The data accumulating during calibration (program and data contents, description files, documentation) can be managed in a process-conformant manner in a database with eASEE Calibration Data Management, a standalone software tool, and they can be saved for reuse across projects. The increasing complexity of calibration projects can be mastered by managing all data objects in variants, versions, and configurations.
Diagnostics
The Diagnostic Feature Set permits symbolic access to diagnostic functions and data. The diagnostic description file is created with CANdelaStudio . If there is no special diagnostic description file, the generic files supplied for UDS and KWP2000 also enable symbolic access to functions and raw data. As a diagnostic tester CANape offers the following functions:
Selection, parameterization, and execution of diagnostic functions on the diagnostic console, e.g. reading out and displaying ECU identification
Window for displaying and editing the error memory; symbolic display of DTC's and environmental data
Detailed and symbolic representation of the executed diagnostic functions and their results in a Trace Window
Visualization of the chronological flow of diagnostic functions and diagnostic communication between ECU's
Scripts for automating diagnostic sequences
System Requirements:
PC with at least 500 MHz and 256 MB RAM
Windows 2000 SP4, XP SP2 or Vista (with UAC disabled)
Supported CAN, LIN, and FlexRay interfaces
Included with Delivery:
German and English program versions on CD-ROM
Full documentation on CD-ROM including manuals in German and English (in PDF format )
Printed manual, including installation instructions for the CAN hardware, quick start and tutorial
Functional Expansion with Supplemental Options:
Advanced Multimedia Option, e.g. to verify object recognition algorithms in the development of driver assistance systems
GPS Option for displaying the momentary vehicle position on a map (GPS-supported) for Europe and Japan
OSEK monitor option for acquiring and evaluating OSEK operating system information
MCD3 Option extends CANape by adding a ASAM MCD3 V1.0 automation interface
Hardware Interfaces and Protocols (others upon request):
Support of CAN, LIN, and FlexRay buses
CCP on CAN or Ethernet (TCP/IP and UDP)
XCP on CAN, Ethernet, USB, RS232, SPI, SCI, LIN 1.x, FlexRay
KWP2000 on K-Line (with level converter Ser2K)
ISO 14230 (KWP2000 on CAN) and ISO 14229 (UDS). Transport protocols ISO/TF2 and VW-TP2.0
Cooling bus on LIN 1.x
Monitoring of SAE J1939 and GMLAN
Windows 2000 SP4, XP SP2 or Vista (with UAC disabled)
CANape supports the following measurement devices:
Vector VS 6xx measurement modules to acquire analog voltages and temperatures
Vector IOcab 8444opto hardware interface to acquire analog and digital signals and to output analog, digital, and PWM signals
CANextender
Firewire modules from Ipetronik
All measurement data acquisition equipment interconnected to the PC via the CAN bus (e.g. devices of the companies Ipetronik, CSM, IMC)
Analog and digital measurement cards from National Instruments
IMP thermal measurement modules from the Solartron company
New features of version 6.5
Extended bus support and measurement hardware
Support of Vector’s VN3300 and VN3600 FlexRay interfaces
Code generator supports development of device drivers to support external measurement equipment or proprietary protocols
Comprehensive diagnostics
Extended ODX 2.0 support for flash and diagnostic data
Devices can be created quickly and easily by drag-and-drop ODX files
Expanded MATLAB/Simulink support
Model-based software development is supported by display of Simulink models. The calibrator can see relationships directly between calibration parameters and the structure of the application to be calibrated
Optimized XCP interface for xPC Target from Mathworks
Greater evaluation functionality
Signal-based evaluation of FlexRay and MOST measurements logged with CANalyzer/CANoe
Substantially expanded script language, e.g. for script-driven measurement cursor positioning to enable convenient access to measurement data at any desired time points
Improved user interface and display
Display of numerical values in the Graphic Window legend
Extensive search and filter functions in the Signal Explorer
Expanded Panel Editor and optimized use of keyboard for panel controls
User management
Customized user profile based on a user concept that enables specific menu options and individual task settings
Extended Option Advanced Multimedia
The GFX Editor makes it considerably easier to create and manage graphic symbols for object verification in driver assistance systems
Expanded bus and protocol support
Monitors FlexRay and XCP on FlexRay with PDU support based on OEM-specific description file
Monitors LIN 2.1
ASAM parameter set format CDF 2.0 (successor to PaCo)
Quick measurement technology solution via AUD interface with RAMScope from Yokogawa
More extensive flash options
ODX-F based flash process using script
Extended MATLAB/Simulink support
Graphic representation of Simulink models even without MATLAB/ Simulink installation; easy navigation through models and search functions
Automated mapping of inputs and outputs of the Simulink models to real signals in CANape by naming convention
Improved user controls and display
Voice output of text contents by triggering or script
Optimized display of bus messages in the Trace Window with color coding of different message types
Automated adjustment of Y-axes in the Graphic Window during measurement
Export of contents from GPS, video and MATLAB windows to the clipboard
ECU-specific activation of indirect calibration mode now possible
Operating system extension
Support of the Windows Vista operating system
Advanced Multimedia Option
Quick configuration and management of graphic symbols for objects detected by driver assistance system via the new GFX Editor
Replay of a recorded video image via the VGA port to stimulate a video sensor while simultaneously performing a measurements
Special Functions:
Support of CAN, LIN, and FlexRay bus systems as well as measurement and calibration over CAN, LIN 1.x, 2.0, and Cooling bus.
Reliable and time-synchronous commenting of driving situations via audio and video recording without keyboard input.
Process-conformant management and reuse of calibration data across projects with the standalone server and database tool eASEE.cdm.
Integrated programming language facilitates processing of measurement values and signals and the automation of user control sequences.
Options expand functional scope to include visualization of GPS vehicle position, a ASAM MCD3 interface, OSEK operating system monitoring, and optical verification of object recognition algorithms in developing driver assistance systems.
>>>
View the product on accutest.co.uk
Accutest Limited
SYSTEM ARCHITECTURE SOFTWARE - SYSTEMDESK
For developing complex system architectures * Early verification of automotive software architecture * Support of graphical system modeling for easy handling of complex systems * Separate
and appropriate modeling of different system aspects * Exchange and integration of software descriptions to improve OEM/supplier processesBetter tool support is therefore needed on the system level and the architecture level as well. Model-based development of ECU software and the graphical representation of the components and their communication improves the overall understanding of even complex systems. Furthermore, the formalization of the components enable their distribution to different developers. The automotive software development process can also be improved by reusing application software components. This allows manufacturers and suppliers to utilize software modules that were already tested, thereby minimizing potential software hazards and cutting the development workload.Key BenefitsSystemDesk is a software architecture tool supporting the development of distributed automotive electrics/electronics (E/E) systems and subsystems: * Designing functional networks and software architectures * Modeling systems according to the AUTOSAR standard * Formalizing hardware topologies and network communication * Integrating ECU code * Generating an AUTOSAR Runtime Environment (RTE) * Simulation of a single software component and ECU networks * Providing process support, such as scripting, connection to version control systems, requirement management systems, and libraries for storing reusable objects
>>>
View the product on dspace.ltd.uk
dSPACE Ltd
MIMICS Z™ SOFTWARE
For the first time, doctors, nurses, and technicians who have no previous experience with 3D modeling or 3D printing can create 3D anatomical models from MRI and CT scan images quickly and easily.
Developed by Materialise (creator of Mimics, the leading medical imaging software for the rapid prototyping industry), Mimics Z™ is optimized for output on Z Corp's high-definition, 3D printers that produce full-colour models in only hours. Healthcare organizations worldwide increasingly rely on 3D anatomical models for pre-operative planning, specialist consultation, implant fit and design, patient counseling and medical education.
Key Features
Software wizards guide users with nominal training through the entire process. Includes an extensive help function and templates.
Automates all steps needed to import MRI and CT scan files, select structures, conduct editing and masking, and export data.
Processes industry standard DICOM data and outputs ZPR files optimized for printing on Z Corp. 3D printers.
Tight integration with ZEdit software, enabling users to add colour to highlight
>>>
View the product on rapidtechniques.com
Rapid Techniques Ltd
SOFTWARE TERIOPLOT BASIC
Terioplot is a suite of software that provides comprehensive network printing and accounting features for the Teriostar family of wide-format LED printers and copiers.
Terioplot basic includes 7
components: Terioplot, Terioplot Print Engine, and Terioplot Configurator are loaded on the Print Server; Webprint, the Windows Driver, and the HDI Driver are loaded on each client’s computer in the network.
Terioplot is a suite of software that provides comprehensive network printing and accounting features for the Teriostar family of wide-format LED printers and copiers.
Terioplot basic includes 7 components: Terioplot, Terioplot Print Engine, and Terioplot Configurator are loaded on the Print Server; Webprint, the Windows Driver, and the HDI Driver are loaded on each client’s computer in the network.
Terioplot turns any print server computer into an easy-to-use walk-up copier, with accounting functionality. Make copies, print copies, or scan directly to TIFF, Bitmap, or PDF.
Terioplot Print Engine is a full-feature print sever with comprehensive administrative controls. It’s elegant print queue control panel shows all printer/copier activities on the network including jobs being processed, jobs in the print queue, job information, job files, sets, user data, printing status, job priorities, dates and times of printing,
even a thumbnail of the images.
Terioplot Print Engine is a full-feature print sever with comprehensive administrative controls. It’s elegant print queue control panel shows all printer/copier activities on the network including jobs being processed, jobs in the print queue, job information, job files, sets, user data, printing status, job priorities, dates and times of printing,
even a thumbnail of the images.
Access Terioplot from anywhere on the network using a browser. Send files, check printer status, or look at the printer queue.Drag-and-drop files directly into a hot folder.
>>>
View the product on seiko-i.com
Seiko Infotech Inc
ARCHITECTURE SOFTWARE - SYSTEMDESK SIMULATION MODULE
Early verification of automotive software architectures * Simulation of a single software component * Simulation of ECU networks * Bus simulation * Basic software emulation *
Integration of Simulink plant models as AUTOSAR software components for closed-loop simulation * Test automation via COM interface * Graphical visualization of measured dataApplication AreasThe SystemDesk Simulation Module allows a PC-based offline simulation. You can simulate a single software compo-nent (SWC) containing multiple functions, a single electronic control unit (ECU) model with several SWCs and also whole system models with various ECUs including the simulation of a specified bus communication. The simulation can take place as soon as the implementation with C code is available.Key BenefitsNot only can software architectures and systems be modeled in SystemDesk, but their overall behavior can also be simulated. Single SWCs or networked ECUs can be verified in an early development stage, thereby saving time and costs. For a rough estimation of bus usage, effects such as arbitration or bus capacities can be simulated. Parts of the basic software needed for the simulation can be emulated. All of SystemDesk’s simulation options can be controlled via integrated scripting options or the COM-based automation interface. This enables you to integrate the simulation into your testing and development processes and to automate test execution, for example with Python-based scripts.
>>>
View the product on dspace.ltd.uk
dSPACE Ltd
SOFTWARE - SAGE 1000
Sage 1000
Released in early 2006, Sage 1000 is a single business management software application designed to span operations across mid-sized businesses. By integrating software to share
information between functional areas, businesses can enjoy greater efficiency, experience fewer user errors and increase service levels by making it easier to give accurate, timely information from across the business to customers. As a single application spanning your business, Sage 1000 brings many benefits:
Improved efficiency - less time searching for information, more time acting on it
Workflow to suit your business - the fully embedded workflow across key business areas allows you to truly model how you want your business to run
Better customer service - staff have quick access to essential information from across the business
Based on stable Sage business logic and technology - Sage 1000 is based on business logic already deployed in thousands of businesses resulting in huge functionality and stability
Lower cost of deployment - Sage 1000 runs in a standard Web browser, so rolling the system out over multiple workstations is straightforward and fast
Lower cost of ownership – with no separate upgrade cycles for different software products, no interoperability headaches, a single point of contact and lower training and support costs
Secure - individual and role-based user rights can be tightly defined
>>>
View the product on datel.info
Datel Group
SYSTEM ARCHITECTURE SOFTWARE - AUTOSAR RTE GENERATION MODULE
Production C code for AUTOSAR-compliant run-time environment * Optimized AUTOSAR 3.0 compliant RTE code generation based on TargetLink technology * ECU code with minimized memory and run-time
requirements * Automatic and manual mapping of runnables to OS tasks * Support of calibration and measurement dataApplication AreasThe AUTOSAR RTE Generation Module is an add-on to SystemDesk which generates optimized RTE code. The RTE abstracts the software component layer from any implementation details of the basic software and from the hardware. It is responsible for communication between software components (SWCs) and implements the OS tasks. When the tasks and the COM signals of the ECU have been configured, the C code for the RTE implementation can be generated.Main Features of SystemDesk’s RTE Generator * Optimized RTE code generation based on TargetLink technology * Minimized memory and run time due to using preprocessor macros instead of C functions * Support of all major AUTOSAR RTE concepts * Graphical editor for efficient mapping of runnables * Validation of runnable mapping before RTE generation * Support of AUTOSAR 3.0Calibration and MeasurementSystemDesk allows the specification of calibration and measurement data as defined in AUTOSAR. The specification is done on the level of interface elements of the components’ ports and the interrunnable variables of a component. After the RTE generation, SystemDesk is able to generate an ASAP2 file (ASAM MCD 2MC) containing the information about all RTE-relevant variables to be calibrated or measured. If the ECU’s basic software also comprises a calibration service (e.g. an XCP service), the calibration and measurement data can be accessed and calibrated at run time with a tool like dSPACE’s CalDesk by using the generated ASAP2 file.
>>>
View the product on dspace.ltd.uk
dSPACE Ltd
ZEDIT PRO SOFTWARE
ZEdit Pro’s industry-first capabilities focus on three functional areas that improve the quality of 3D printed models and enable more full-colour 3D content to be printed.
Automatically analyze
whether a 3D data file is ready for 3D printing
Automatically detect problems Use Autofix to correct issues with a single click
Repair geometries with the fewest possible steps, and menu-guided prompts. Close gaps. Repair meshes. Add depth. Add Colour & Annotations
ZEdit Pro makes it easy to add graphical elements to 3D data files to improve the communication value of the printed model. Simply follow the menu prompts to add colour, texture, annotations and engineering labels. Create annotations from scratch, or apply graphics created in software like Adobe® Photoshop® or Adobe Illustrator®.
Colour parts by shell, surface or triangle
Apply texture maps, project labels, logos, images or other graphics directly to the surface of the part
Crop labels across edge lines and automatically wrap around contours
Easily size, shrink, expand and move labels once applied to parts
Add coloured text, circles and arrows to surfaces, for instance to highlight a subtle but important feature.
Markup capabilities support multiple languages
Print preformatted engineering labels on the surface of parts to communicate part information. Includes standard, customizable templates plus an easy-to-use label editor
Take advantage of built-in prompts for ease of use
Leverage the .zpr file format to retain colour and texture mapping information in a single file for later use or analysis
Prepare Models, create models larger than the build size of the printer, in component pieces, a single-click splits file into two pieces, a single-click creates pins and holes for reassembly of sections after printing
Easily hollow solid objects to reduce weight and save money
Create bases and pedestals for models, and other simple new geometry
>>>
View the product on rapidtechniques.com
Rapid Techniques Ltd
LOGICIEL CADDS 5I CVNC - NC BUILDER
NC Builder offre une nouvelle fonctionnalité basée sur les méthodes qui permet une approche innovante de la fabrication d'outils, d'éléments moulants, de moules, de prototypes, d'éléments de pièce
et d'assemblages. Les utilisateurs peuvent ainsi stocker et réutiliser des combinaisons de départ et spécifiques de tâches d'usinage (comme les méthodes) créées dans des programmes de pièce précédents. Par conséquent, les entreprises peuvent capturer leurs connaissances de fabrication pour produire plus rapidement des pièces de meilleure qualité et moins chères que la concurrence. NC Builder fournit également une interface utilisateur de feuille de sélection avec icônes qui simplifie la programmation CN et permet aux programmeurs CN de se consacrer à la tâche d'usinage plutôt qu'à la syntaxe de commande de CVNC.
Plus spécifiquement, cette approche de la programmation CN basée sur les méthodes permet d'automatiser et réutiliser des séquences de tâches d'usinage courantes ou complexes, de gagner du temps et d'exploiter des connaissances éprouvées pour une rentabilité immédiate.
Avantages
* La réutilisation de méthodes de fabrication éprouvées permet de raccourcir considérablement le temps de programmation CN et d'améliorer la cohérence de la trajectoire d'outils dans des pièces similaires.
* La fonctionnalité de conception et de fabrication intégrées garantit un niveau élevé de précision et de conformité aux spécifications de conception, permettant ainsi aux utilisateurs de transformer les données de conception en outils, pièces et assemblages de qualité à une vitesse incomparable.
* Permet de réaliser la tâche CN en imposant une séquence qui facilite l'ordonnancement flexible de la programmation des pièces.
* Les sélections de géométrie et d'emplacement sont chargées dans l'interface en vue de l'édition et de la correction avant le traitement, ce qui permet de réduire les risques d'erreur.
* Possibilité de trier automatiquement les tâches par outil de coupe afin de réduire les changements d'outil et de raccourcir les délais d'usinage en atelier.
* La souplesse du traitement des sorties permet de compléter et configurer la sortie détaillée CLfile, ce qui simplifie le post-traitement et permet une meilleure utilisation des fonctions de la machine-outil.
Caractéristiques
* Système de programmation basée sur les méthodes
* Caractère international grâce à l'implémentation d'une interface avec icônes
* Outils de configuration et de personnalisation
* Tri des tâches par outil de coupe
* Fonctionnalités de géométrie stockées avec la pièce CADDS, et non avec CVNC JCF, permettant la réutilisation indépendamment des JCF
*
NC Builder est disponible pour les modules CVNC suivants. Ce module ne peut être vendu séparément et n'est disponible qu'en package.
* CVNC -M3
* CVNC -M5
* CVNC-T2
* CVNC -Fastening
>>>
View the product on ptc.com
PTC
SOFTWARE - CANALYZER/DENALYZER 7.0
CANalyzer is one of the most widely used analysis tools for networks and distributed systems. The tool makes it easy for the user to observe, analyse and supplement data traffic in CAN , LIN, MOST
or FlexRay Systems.
The difference between CANalyzer and DENalyzer is that CANalyzer is primarily used for those bus systems using CAN although they can be extended by options for use with LIN, MOST and FlexRay. DENalyzer is ideal for those who work exclusively with LIN, MOST or FlexRAY with DEN being an abbreviation for Distributed Embedded Networks.
With powerful functions and user-programmability, all needs are covered from simple network analyses to advanced troubleshooting of complex problems.
CANalyzer is offered in three versions, namely Professional, Fundamental and Junior and their features and differences are illustrated in the CANalyzer Feature Matrix
Features And Advantages
CANalyzer is controlled from a graphic block diagram which shows the data flow from the bus over the PC interface to the various screen evaluation windows and the log file. The system is parameterised and the user can place function blocks on the diagram and then configure them e.g. Filter, Generator and Replay Blocks.
Functions:
Listing of bus data traffic (Tracing)
Graphic and textual display of signal values
Interactive sending of predefined messages
Sending of logged messages
Statistics on messages, bus loading and bus disturbances
Logging of messages for replay or offline evaluation
Generation of bus disturbances
Application Areas
CANalyzer covers a multitude of uses from a start-up system for training purposes to powerful analysis and emulation systems for complex applications. E.g. it enables a Replay Block in the Send Branch to play previously recorded data traffic of a functional bus system back onto the bus. By placing a filter after this, it is possible to shut out specific portions of the data traffic (e.g. replies from a sensor). This is a perfect test environment for a sensor in the laboratory.
Other CANalyzer application examples:
Emulation of single bus modules
Gateway between two buses with manipulation capability
Program-triggered logging of critical phases
User-specific online evaluation with clear text messages
Features
Options & Protocols available: CAN, LIN, MOST, FlexRAY, CANopen, DeviceNet, J1939, NMEA 2000, CANaerospace and J1587
Hardware Interfaces
CANalyzer supports all Vector hardware interfaces i.e:
CANboardXL
CANboardXL pxi
CANcardXL
CANcaseXL log
CANcaseXL
FlexCard
VN2600 (MOST interface)
VN2610
For the most part the PC hardware from Vector possesses sufficient interfaces to operate a bus with real, measurable message exchange without requiring other components.
Analysis Functionality - Windows And Function Blocks:
Measurement Set-up is used for graphic display and parameterization of function blocks and evaluation functions.
Trace is used to list all bus activities such as messages, error frames, and remote frames. For each message it is possible to show individual signal values - even during the measurement.
Statistics is used to display message rates over the identifier axis.
Graphic is used for graphic online display of variables carried in the CAN messages such as rotational speed, temperature, etc. over a time axis.
Data is used to display pre selected data, e.g. numerically or as a barchart.
Bus Statistics is used for global display of message rates, error rates, busload, and CAN controller states.
Write is used for system messages and user-specific outputs from CAPL programs.
Interactive Generator Block is used to stimulate the bus and to inject modified signals in a simple way.
Interactive Generator is used to generate mathematical signals (Sinusoidal, ramp, pulse, value list, etc.)
Integrated Desktops
CANalyzer users often need to keep a large number of Analysis Windows opened. CANalyzer provides an integrated desktop concept that lets the user switch between any desired number of virtual desktops using the tabbed pages in the Program Window.
Desktops are used to organize windows so that they are manageable. Opened windows may be assigned to as many desktops as desired, and information may be sorted by work process or subject matter.
The user can provide as much information as they want on each desktop, and it is possible to display identical information (identical windows) on different desktops.
Programmability
Due to its user-programmability, the user can expand the functionality of CANalyzer as needed. Blocks may be inserted at any point on the data flow plan, and the user programs their functions. The application-oriented C-like language CAPL ( Communication Access Programming Language) is used as the programming language. CANalyzer has an interactive development environment, which makes it easy to create, modify, and compile CAPL programs.
Database Support
In a project database you can assign project-specific names, conversion formulas, physical units, etc. to messages and their data segments. Platform databases can be created and maintained using the DaVinci Network Designer. The database makes it possible to represent messages and their data contents on the application level (e.g. CarSpeed = 210 km/h). Sending of messages and their data contents can also be parameterised on the application level. The more advanced DaVinci Network Designer permits supplemental variant management, version management for the network data of an entire vehicle. Additionally for other networks types their definition formats are support: for LIN LDF files can be used; for MOST the XML Function Catalogue; and for FlexRay the Fibex format. Also for FlexRay the Vector tool chain is the only one that fully supports the Fibex+ standard
Logging
Logging can be used to record entire measurements or parts of measurements in files. The events used to trigger logging of measurement data are defined in a trigger configuration. The quantity of data can be limited by specifying Time Windows around the trigger events.
Examples of trigger conditions: Messages, signals, signal changes (edges), bus statistical information, and error states. It is possible to trigger on complex system states by forming groups and relations using logical operators, model series, and timing analysis for estimates of busload.
Offline Evaluation
All CANalyzer functions may be utilized in a later evaluation of the logged traffic in offline mode. After a test drive, for example, the user can conveniently analyze the extensive logged data back at the office. Log files can also be imported directly into the Trace Window.
Export Functions
Export functions for logging as well as the Trace and the Graphic Windows allow for the conversion of log files or Graphic Window contents to other file formats such as *.csv, etc. When exporting log files individual signal information is already extracted from the logged message-oriented data. As an option it is possible to have third applications (e.g. Vector CANgraph, Microsoft® Excel) automatically started with the export.
Data Interpretation
Included with the product is an Observer for the ISO/DIS 15765-2 transport protocol. This Observer interprets transport protocol messages that are sent over the CAN bus and represents the results in the Trace Window in clear text. Furthermore, diagnostics interpretation by KWP2000, UDS, or CANdelaStudio description files is possible.
CANalyzer Versions
There are several modified program variants for different types of uses. Each variant has a range of functions that is focused on its specific task area:
CANalyzer /professional
The Professional variant offers unlimited access to all functions and expansions. This variant supports all applications from simple observation of bus traffic to complex analysis and stimulation of heterogeneous systems.
CANalyzer /fundamental
The Fundamental variant offers unlimited access to all standard functions. Not supported in this variant is the capability of creating and executing CAPL programs. Therefore this variant is appropriate for all users whose applications can be covered with the integrated filtering, analysis, and stimulation functions.
CANalyzer /junior
The Junior variant may be used for CAN or LIN. Its display of message traffic in the Trace and Data Windows makes this variant ideal for simple analysis of a single bus.
The differences between the versions are explained in the Feature Matrix CANalyzer/DENalyzer and CANoe/DENoe.
New Features Of CANalyzer and DENalyzer version 7.0
Use the new Panel Designer for an easy and fast creation of panels; e.g. symbols can be added to controls using drag & drop. Individual panels and controls can be configured in the Properties window which remains open.
Signals configured in the Data and Graphics windows can be written directly in the signal-based MDF format. To write all signals to one MDF file, you can configure the logging block accordingly. Recorded signal sequences (MDF file) can be automatically displayed in CANgraph after measurement.
Full Windows Vista® support even if UAC (User Account Control) is active. The installation program now supports the standard Windows data structure with separate program and data folders (for single users/all users).
The usability was further improved in version 7.0 by implementing various customer wishes:
The CAPL programming language was further improved and for example now also supports custom enumeration types (enums), pragma messages for outputting compile time messages and the usage of references (call by reference).
The usability of the CAPL Browser has been enhanced: empty event procedures can easily be hidden and several opened files can be accessed by tabs. The "auto complete" function now works also for include files and CAPL DLLs.
When opening or writing files, the dialog automatically uses the last opened folder or the configuration folder.
The Acceptance filter's default is open for all channels.
Tooltips are now shown for signals in the Graphic window legend.
The preferred log format for all configurations can now be specified.
New Features Of CANalyzer and DENalyzer version 6.1
>>>
View the product on accutest.co.uk
Accutest Limited
AVEVA NET PORTAL
AVEVA NET Portal
Unlock your data… Unlock your potential
AVEVA NET Portal is the only true low-risk Information Management solution, proven in the engineering and operation of some of the world's
largest and most complex process plants. Information access has never been easier, nor a more effective tool for resolving issues or decision making.
Business Benefits
Improved staff productivity
Rapid, unrestricted access to information
saves man-hours.
Reduced project risk
AVEVA NET Portal makes change assessments easier, highlights design problems, and makes progress and material status easier to track. Project history information supports better tenders for future projects.
Efficient commissioning
AVEVA NET Portal improves the quality of the as-built information. Handover information is complete and accessible. Trouble-shooting becomes quick and effective.
Maximised plant throughput
60% of downtime is spent finding information.
AVEVA NET Portal puts it in the hands of the people who need it.
Reduced operating risk
Lack of information sharing is the largest cause of safety incidents. AVEVA NET Portal makes Health, Safety and Environment [HSE] information easily accessible.
Key Features
Rapid access to information
The web browser interface makes searching linked information sources quick and easy. Click on a hot-spotted item and find all its associated information.
Automatic updating
Information cross-references are intelligently and automatically updated as the information itself is updated.
Real-time process data presentation
Display current and historic process data in context.
Powerful, easy and intuitive search functions
For example, Find all pumps on lines of nominal bore x mm.
Quality assurance
Information integration enables inconsistencies to be highlighted and resolved.
Visual equipment status display
For example, show all equipment available on site - a powerful means of managing work schedules.
Easy as-built data access
Photographs can be overlaid with intelligent links to equipment and tag numbers - an easy way of capturing the as-built plant.
Standard information gateways
AVEVA NET Portal uses standard ISO 15926 and ISO 10303 gateways, and gateways to popular systems including Intergraph, Bentley, SAP and MRO.
>>>
View the product on aveva.com
Aveva Solutions Ltd
LOGICIEL DE CAO 3D PRO/ENGINEER
C R É AT I O N R A P I D E D E P I È C E S D E Q U A L I T É S U P É R I E U R E AV E C T R A J E C T O I R E S D ’ O U T I L S O P T I M I S É E S
Face à la rude concurrence internationale,
les
ingénieurs de fabrication doivent
désormais porter une plus grande attention
à la qualité, à l’innovation et au délai de
mise sur le marché des produits. PTC a la
solution : Pro/ENGINEER Prismatic and
Multi-Surface Milling, l’outil par excellence
des ingénieurs de fabrication contraints
de créer des pièces très complexes et des
produits de qualité supérieure dans des
délais toujours plus courts.
Grâce à une intégration transparente avec tous les outils de
CAO 3D de Pro/ENGINEER, Pro/ENGINEER Prismatic and Multi-Surface
Milling améliore considérablement votre productivité ; il supprime la
conversion de données entre les applications de CAO/FAO, automatise
de nombreuses tâches de programmation fastidieuses et exploite vos
modèles 3D pour créer une trajectoire d’outil optimale pour l’usinage
de production – tout cela rapidement, et le plus simplement du monde.
Avantages clés
Création facilitée de la géométrie et des composants de fabrication
(dispositif de serrage et brides) grâce à l’intégration complète
de la conception et de la fabrication
Programmation orientée fonction et géométrie, pour une meilleure
adaptabilité aux modifi cations de conception
Usinage de production prévisible et fi able ayant pour effet d’écourter
le délai de livraison des produits
Capture et réutilisation de des pratiques d’usinage permettant
de rationaliser et standardiser les méthodes de fabrication
Solution d’usinage complète, de la conception à la génération du code
CN : création de programmes CN, documentation des processus,
post-traitement, vérifi cation et simulation de la trajectoire d’outil
Environnement CAO/FAO parfaitement intégré
Associativité totale entre les applications
Solution paramétrique et orientée fonction
Défi nition complète du modèle de produit
Génération de trajectoire d’outil pour pièce prismatique 2 axes
Perçage automatique
Génération de trajectoire d’outil pour fraisage 3 axes multisurface
Bibliothèque d’outils
Documentation automatique des processus
•
•
•
•
•
•
•
•
•
•
•
•
•
Vérifi cation de la trajectoire d’outil
Génération de code CN (post-traitement)
Espace de travail collaboratif orienté Web
Fonctions et caractéristiques techniques
Fonctionnalité d’assemblage de base
Dessin détaillé et dessin 2D
Création d’images au rendu réaliste
Création et simulation de mécanismes
Génération graphique de trajectoires d’outil
Interface de données : IGES, STEP, VDA, DXF, CADDS 5
Compatibilité avec les données importées et les données
de solides Pro/ENGINEER
Bibliothèque d’outillage avec paramètres de coupe, d’avance
et de vitesse, basés sur la matière
Modèle de produit très détaillé (brut, brides, outillage)
Contrôle de collision avec toutes les formes d’outils
Entrée et sortie d’outil hélicoïdal, par accroissement linéaire
ou par plongée
Documentation automatique d’atelier
Trajectoires d’outils réordonnées par glisser-déposer
Modifi cations de conception répercutées automatiquement dans
les informations d’usinage
Usinage de pièces par table de même famille ; programmation unique
pour répercussion dans toutes les instances
Modifi cation et manipulation des trajectoires d’outil
Prise en charge des sous-programmes
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Trajectoires d’outil d’ébauche et de reprise d’ébauche dans Pro/ENGINEER.
>>>
View the product on ptc.com
PTC
