Slaughter

United Kingdom

See product on hipot.com

The 2550 provides both AC Hipot and DC Hipot testing in a single instrument. It features a 5 KV, 10 mA AC Hipot test and a 5 KV 3 mA DC Hipot test. With its advanced features and product reliability it is well suited for quick and easy Electrical Safety testing. 1. Tamper-Resistant Front Panel Design Prevents operators from inadvertently or accidentally modifying test parameters, and ensures consistent and reliable test results, minimizing the need for costly and time consuming product re-testing. 2. Simple Menu Control All parameters for the setups can be adjusted

through a simple menu driven program. The easy to follow setup screens ensure that the operator correctly sets up all test parameters. 3. Electronic dwell settings The electronic dwell control helps keep test results consistent by ensuring that the test duration is the same for each product tested. 4. Electronic ramping Electronic ramping provides a gradual and timed method to increase output voltage to the DUT, minimizing any damage from quickly over-applying high voltage to sensitive DUTs. 5. No load setup of trip current and output voltage This provides the operator with an easy and safe way to set trip currents and output voltages since parameters are set without the high voltage activated. 6. Test Storage The 2550 powers up with the parameters that were used during the last test to avoid operator setup errors. 7. Optional Continuity test mode With this optional card, the 2550 meets ground continuity test requirements called out by UL and other safety agencies. 8. LED Display With Meter Memory The 2550 features a LED display for setting up and viewing test results. The meter memory allows operators to review the last test results. 9. Output voltage fine adjustment To make the 2550 usable in all types of applications, the operator can manually bring the voltage up or down in 10 volt increments by simply pressing the up and down arrow keys. This makes it very easy to adjust the output voltage even while the instrument is in the dwell mode so you can analyze test results at different voltages. 10. Software calibration control The 2550 is calibrated through the front panel keypad. All calibration information is stored in non-volatile memory. This allows the instrument to be completely calibrated without removing any covers and exposing the technician to hazardous voltages. 11. Line and load regulation This system maintains the output voltage to within 1% from no load to full load and over the line voltage range to ensure that test results remain consistent and within safety agency requirements. 12. PLC remote inputs and outputs The standard 9- pin interfaces provide outputs for Pass, Fail, and Test in Process. Inputs include Test, Reset and Interlock. This gives the user all the basic remotes required to configure the Hipot through simple PLC relay control. 13. Flashing high voltage indicator A flashing LED located directly over the high voltage terminal clearly indicates when high voltage is active to provide maximum operator safety.
Save this product