Security detection: les fournisseurs, grossistes et fabricants sur EDGb2b
Search   
Search among 9 853 suppliers and 84 104 products


Security detection :

51 products
Select the category
    Selection of 40 products among 51
    SECURITY LIGHTING - OPAL XL EXTERNAL PIR

    SECURITY LIGHTING - OPAL XL EXTERNAL PIR
    IP55 rated, 10 to 35 metre, 90 degree fully adjustable. An inconspicuous and proven 35-metre external passive infrared detector that works in conjunction with GJDÂ’s security lighting controllers. GJD Opal XL detectors are designed for outdoor use in conjunction with the following GJD indoor lighting controllers : - Sapphire Mk3 - Emerald Mk3 - 2 and 4 zone Solitaire keypads - Solitaire Expansion Unit - The new DygiZone 4 zone lighting controller /enunciator >>>
    View the product on gjd.co.uk GJD Manufacturing Ltd
    ALUMINIZED CIRCULAR FLAT MIRRORS

    ALUMINIZED CIRCULAR FLAT MIRRORS
    • Protected aluminum coating • Four levels of quality Specifications Interferometer QualIty material: Fused Silica Diameter tolerance: ±0.5 mm thickness tolerance: ±0.5 mm Surface accuracy: ?/20 at 633 nm Surface Quality: 40-20 Coating: Protected Aluminum reSearCh QualIty material: As indicated in table Diameter tolerance:: ±1.0 mm thickness tolerance:: +0.5 -1.5 mm Surface accuracy: ?/10 at 633 nm Surface Quality: 60-40 Coating: Protected Aluminum laboratory QualIty material: Pyrex Diameter tolerance:: ±1.0 mm thickness tolerance:: ±1.0 mm Surface accuracy: ?/4 at 633 nm Surface Quality: 60-40 Coating: Protected Aluminum utIlIty QualIty material: Crown Glass Diameter tolerance:: ±1.0 mm thickness tolerance:: +0.5 -1.5 mm Surface accuracy: 1-3 ? at 633 mm Surface Quality: 80-50 Coating: Protected Aluminum >>>
    View the product on ealingcatalog.com EALING
    DOVE PRISM

    DOVE PRISM
    Dove prisms are used as image rotators. As the prism is rotated, the image passing through will rotate at twice the angular rate of the prism. * Dove prisms can be used with parallel or collimated light. * Normally used in total-internal-reflection mode with the hypotenuse face un-aluminized. * The useful aperture can be doubled by aluminizing or silvering the hypotenuse face of two identical prisms with their faces cemented together. * Various coating options are available. General Specifications: Parameters Value Material Bk7 Clear aperture 90% Dimension tolerance +/-0.15mm Surface flatness l/2 Angle tolerance +/-3 arc min Surface quality 60-40 >>>
    View the product on sunex.com Sunex
    MULTI™: MULTI-ACTUATOR DEFORMABLE MIRRORS

    MULTI™: MULTI-ACTUATOR DEFORMABLE MIRRORS
    The Multi ™ is AgilOptics’ standard line of deformable mirrors comes in many sizes and shapes, available in a wide range of optional optical coatings. AgilOptics’ engineers can design custom mirror diameters and actuator layouts according to the customer specifications. We offer Anti-SnapDown™ protection as a standard feature on all our deformable mirrors! AgilOptics™ Deformable Mirrors are specified by some various parameters, many of which are options that can be tailored to the specific needs of the application. The Actuator Options Chart shows the variety of mirror sizes and layouts that have already been developed. Additional designs are possible under special order. >>>
    View the product on agiloptics.com AgilOptics
    BS-1030 BACKSENSE RADAR SENSOR

    BS-1030 BACKSENSE RADAR SENSOR
    Backsense radar sensors, 3m Range Backsense utilises pulsed radar technology to detect people and objects at a longer range than is typical with ultrasonic reversing aids, which makes it ideal for heavy goods vehicles,construction vehicles and mobile plant machinery. Designed to work on the front, side and rear of vehicles, a single heavy duty sensor is sufficient to cover each zone on all but the largest machines. Because pulsed radar travels through plastic, ruggedness and reliability are ensured by sealing the sensor head inside the plastic sensor housing. Conforms to SEA1455 (environmental) Resistant to moisture, dust, vibration, heat, cold, glare LED visual warning 3 levels of audio warning -40°C to +80°C operating temperature CE and e marked >>>
    View the product on brigade-electronics.com BRIGADE ELECTRONICS PLC
    INTRUDER ALARM - ELITE EXTERNAL PIR

    INTRUDER ALARM - ELITE EXTERNAL PIR
    A passive infrared detector that simultaneously or individually controls cameras, VCRÂ’s, DVRÂ’s and all low voltage switching requirements. The Elite offers a high level of adaptability. There are seven different modes of operation giving various permutations of normally open and normally closed arrangements for the two pairs of volt-free relays, plus a selection of timing and functional options for the relay changeover contacts. Other programmable parameters include the duration of timed changeover, a pulse count feature and a choice of detection ranges from 10 to 35 metres. >>>
    View the product on gjd.co.uk GJD Manufacturing Ltd
    INDUCTION LOOP SYSTEMS PROFESSIONAL

    INDUCTION LOOP SYSTEMS PROFESSIONAL
    The ET150, 300 & 450 form the professional range of audio frequency induction loop (AFILS) amplifiers and are designed to provide studio quality sound in an AFILS system. The amplifiers have 3 inputs on XLR; 2 dedicated microphones and one microphone or line selectable using a rear panel switch. User selectable Phantom Powering is available for the microphone inputs, enabled via a rear panel switch. The inputs are individually mixed before passing to the compressor limiter, which prevents loop overload whilst compensating for varying microphone usage. >>>
    View the product on current-thinking.com/ Current Thinking Ltd
    OMNIDIRECTIONAL ANTENNAS

    OMNIDIRECTIONAL ANTENNAS
    Isolated air-termination systems for omnidirectional antennas Antennas with 360° emitting characteristics are used for different radion applications. These antennas are also known as "omnidirectional antennas" on the market. Typical applications for omnidirectional antennas in practice are e.g. private mobile radio (PMR) systems, emergency call networks and sometimes also GSM networks. However, they are only applied in GSM networks, if there is a low frequency of radio waves. When installing isolated air-temination systems for omnidirectional antennas, it has to be ensured that an isolated air-termination rod covers the antenna to be protected with a sufficient protective angle. Furthermore, a sufficient seperation distance has to be kept. >>>
    View the product on dehn.de DEHN + S?NE
    ALUMINIZED CIRCULAR FLAT MIRRORS

    ALUMINIZED CIRCULAR FLAT MIRRORS
    • Protected aluminum coating • Four levels of quality Specifications Interferometer QualIty material: Fused Silica Diameter tolerance: ±0.5 mm thickness tolerance: ±0.5 mm Surface accuracy: ?/20 at 633 nm Surface Quality: 40-20 Coating: Protected Aluminum reSearCh QualIty material: As indicated in table Diameter tolerance:: ±1.0 mm thickness tolerance:: +0.5 -1.5 mm Surface accuracy: ?/10 at 633 nm Surface Quality: 60-40 Coating: Protected Aluminum laboratory QualIty material: Pyrex Diameter tolerance:: ±1.0 mm thickness tolerance:: ±1.0 mm Surface accuracy: ?/4 at 633 nm Surface Quality: 60-40 Coating: Protected Aluminum utIlIty QualIty material: Crown Glass Diameter tolerance:: ±1.0 mm thickness tolerance:: +0.5 -1.5 mm Surface accuracy: 1-3 ? at 633 mm Surface Quality: 80-50 Coating: Protected Aluminum >>>
    View the product on ealingcatalog.com EALING
    ASTROSCAN 6545 CONVEYOR X-RAY SCANNER

    ASTROSCAN 6545 CONVEYOR X-RAY SCANNER
    The astroscan 6545 is designed and developed to be the ideal solution for the screening of small parcels for airport, government and commercial applications. the tunnel opening of 650mm (25.6”) wide by 450mm (17.7”) high was specifically designed to allow most parcels and hand carried luggage to be easily examined. the astroscan 6545 uses a high-resolution X-ray detector array for improved image presentation and increase automatic threat detection. >>>
    View the product on scanna-msc.com Scanna MSC Ltd
    PENTA PRISM, PRECISION GRADE

    PENTA PRISM, PRECISION GRADE
    Penta prisms deviate beams by 90 degrees. The deviation is independent of prism orientation. Due to geometry, the reflecting surfaces must be coated with a reflective coating. * Image is neither inverted nor reversed as it is deviated by 90 degrees. * 90-degree deviation angle applies to all rays transmitted by the useful aperture, regardless of the angles between these rays and the optical axis (or entrance and exit face normals). * Antireflection coatings are available for entrance and exit faces. General Specifications: Parameter Value Material BK7 Dimensional tolerance +/-0.10mm 90 deg deviation tolerance 10 arc seconds Surface flatness l/4 Surface quality 60-40 Coating AL with black lacquer overcoat >>>
    View the product on sunex.com Sunex
    SIMPLI™: SELF-CONTAINED DEFORMABLE MIRRORS

    SIMPLI™: SELF-CONTAINED DEFORMABLE MIRRORS
    The Simpli™ is a self-contained deformable mirror and driver for simple, less demanding OEM applications where a fixed pattern, variable shape is desired. The design uses a standard 16mm mirror with 37 actuators reinforced with our patented ASD (anti-snapdown) technology, and includes an integrated high-voltage driver all in the same unit. Powering this compact unit can be as simple as hooking up a standard 9 volt battery. * Single-Actuator Group or Four-Actuator Group Design * Integrated Driver on circuit board behind mirror * 40+ hours operating time when powered with one 9V battery(single version) * Mountable in 2" optical mounts * Very Affordable * User provides 0-5v control signal * User defines actuator grouping(s) >>>
    View the product on agiloptics.com AgilOptics
    MICROPHONE - BDM304 & 308*

    MICROPHONE - BDM304 & 308*
    The BDM304 and 308 are multi-zone (four or eight zone respectively) microphones with ‘all call’ paging. They have the same features of the BDM301 plus an All Call switch and a Zone Cancel function. Zone Cancel Function The zone select cancel function offers two options: 1: All zone selections cancelled when speak button is released. 2: The zones selected remain selected after the call has been made. This is useful when repeat calls to the same zones are regularly used. Termination: The cable is terminated to a 25-way D connector for insertion into a BMS25 socket box, supplied with the microphone. Dimensions, mm – W148 x H48 x D177 >>>
    View the product on baldwinboxall.co.uk Baldwin Boxall
    PENTA PRISM, STANDARD GRADE

    PENTA PRISM, STANDARD GRADE
    Penta prisms deviate beams by 90 degrees. The deviation is independent of prism orientation. Due to geometry, the reflecting surfaces must be coated with a reflective coating. * Image is neither inverted nor reversed as it is deviated by 90 degrees. * 90-degree deviation angle applies to all rays transmitted by the useful aperture, regardless of the angles between these rays and the optical axis (or entrance and exit face normals). * Antireflection coatings are available for entrance and exit faces. * We also offer a precision grade penta prisms with tighter manufacturing tolerances. General Specifications: Parameter Value Material BK7 Dimensional tolerance +/-0.15mm 90 deg deviation tolerance 3 arc min Surface flatness l/2 Surface quality 60-40 Coating AL with black lacquer overcoat >>>
    View the product on sunex.com Sunex
    INFRA-RED RECEIVER RED205

    INFRA-RED RECEIVER RED205
    These infra-red receivers are usually fitted in areas where the staff may feel at risk or may need to call for assistance. They receive alarm signals from our range of infra-red transmitters and send the location of the alarm call to the indicator panels. A red light reassures that an alarm call has been received and is also used in conjunction with our new alarm transmitter for the user test function (see RED208/5). >>>
    View the product on sasuk.com Specialist Alarm Services Ltd
    UNIFI™: FULLY INTEGRATED DEFORMABLE MIRROR SYSTEM

    UNIFI™: FULLY INTEGRATED DEFORMABLE MIRROR SYSTEM
    The Unifi™ Deformable Mirror System is AgilOptics’ next generation of membrane deformable mirrors. Unifi™ is an integrated unit with a deformable mirror and a D64USB high-voltage driver. Communication with a Unifi™ DMS is done via USB 2.0. Unifi™ is controlled by AgilOptics’ Clarifi™ or HVDD software packages. Operating Unifi™ requires only a few simple steps. Simply install the unit into your optical system, then plug in the USB cable and power supply, and you’re ready to go! A 4” Thorlabs optical mount is included with the system. The powerful Unifi™ system operates on a single 5V wall block using less than 5W of energy. Unifi™ is a compact package capable of providing actuator commands at up to 4 kHz. * 5W Typical power consumption * Powered using single 5V wall block power supply * 4 kHz Mirror commands * 50 mm standard mirror * USB 2.0 Interface (Type B Connector) * Fits in standard 4" optical mounts >>>
    View the product on agiloptics.com AgilOptics
    PRISM MIRROR, PRECISION GRADE

    PRISM MIRROR, PRECISION GRADE
    Right-angle mirrors are made from right-angle prisms by applying an enhanced AL coating on the hypotenuse of the prism. This allows the prism to be used as either an external or internal reflector with a wide range of reflection angle. General Specifications: Parameter Value Material BK7 Effective aperture 90% Dimensional tolerance +/-0.10mm Surface flatness l/8 Angle tolerance +/- 30 arc sec Surface quality 20-10 Perpendicularity +/-1 arc min Protective chamfer 45 deg Coating Aluminized >>>
    View the product on sunex.com Sunex
    DIAMOND TURNED OFF-AXIS PARABOLIC MIRRORS

    DIAMOND TURNED OFF-AXIS PARABOLIC MIRRORS
    • Ideal for IR applications • Aluminum or gold coatings available These diamond turned mirrors are ideal for IR applications. Please select either a protected aluminum or graded gold coating by adding the appropriate coating suffix (-018 for aluminum and -021 for gold). Specifications Substrates: Aluminum focal length tolerance: ±1% off-axis Distance tolerance: ±0.025 mm mount Distance tolerance: ±0.05 mm Surface accuracy: ?/4 rms at 633nm Surface Quality: ~100 Å rms tapped holes: 25.4 mm D: 6-32 thread 50.8 mm D: 6-32 thread 76.2 mm D: 8-32 thread Dowel holes: 4.77 mm diam. 4.76 mm deep >>>
    View the product on ealingcatalog.com EALING




      Search    
     
     
     
    Search
    See all of the sector's products : Safety