Sealing items: suppliers, wholesalers and manufacturers on Hellopro
Search   


Sealing items :

24 products
Select the category
    Selection of 24 products among 24
    COMPRIBAND ALI TAPE PB

    COMPRIBAND ALI TAPE PB
    Compriband Ali-Tape PB is a high performance sealing tape that consists of a high performance plasto-elastic butyl rubber adhesive / sealant applied to one side of an aluminised polyester film. Compriband Ali-Tape PB is a tough tear resistant product and is weather and UV resistant. The tape is highly impermeable to water vapour and other gases. Typical Uses Compriband Ali-Tape PB is intended for the internal and external sealing and repair of joints and overlaps in a wide variety of applications which includes amongst others shop fitting, facades, conservatories, air conditioning, and ventilation. >>>
    View the product on illbruck.com Illbruck Joints Et Systèmes
    MEMBRANES - CHALLENGER P&R

    MEMBRANES - CHALLENGER P&R
    Polyester Based Cap Sheets and UnderlaysThe Challenger products form a simple range of roofing membranes, which are suitable for domestic and commercial applications. Challenger membranes have a polyester base for toughness and durability and an oxidised bitumen coating. Green and blue/grey slate surface membranes are available for use as cap-sheets without the need for protection; sand surfaced membranes are used as underlays or where additional surfacing in the form of chippings or promenade tiles will be provided. >>>
    View the product on ruberoid.co.uk Ruberoid Building Products
    DAMPCHECK PLUS - HIGH PERFORMANCE DPC INJECTION FLUID.

    DAMPCHECK PLUS - HIGH PERFORMANCE DPC INJECTION FLUID.
    Dampcheck Plus is a hybrid, silicone-based DPC injection fluid which, when injected into masonry forms a chemical damp-proof course. Dampcheck Plus utilizes novel silane technology, which results in a high performance, low-odour injection fluid. Dampcheck Plus has a multi-component formulation which means that it develops initial water-repellency quickly, but also allows further diffusion to form a more evenly distributed damp-proof course. Further advantages include: * BBA approved (Certificate No. 97/3363) * Ready for use (No mixing required) * Non-flammable * Enhanced spread characteristics * Faster injection times than conventional DPC fluids. >>>
    View the product on safeguardeurope.com/ Safeguard Europe
    THATCH GUARDIAN

    THATCH GUARDIAN
    DESCRIPTIONThatch Guardian is a water bond, membrane that is formulated in a variety of colours and natural, provide superb sealing and fire retardant qualities. USESThatch Guardian is used to delay the thatch rotting process, which lengthens the roof life. It also keeps the thatch sturdy and prevents birds from pulling out thatch. If sprayed on the inside it prevents dust rains in the house.Thatch Guardian makes the thatch waterproof and will reduce the weight of the roof. It also eliminates the frequent brushing and re- thatching of thatch roofs. >>>
    View the product on self-coat.co.uk Self-Coat London Eco Paints
    REMEDIAL - WATERPROOFING SYSTEMS

    REMEDIAL - WATERPROOFING SYSTEMS
    Waterproofing systems are the main barrier preventing water from penetrating into buildings through roofs, walls and exposed balconies. Failure of waterproofing can lead to rapid escalation of costs, underscoring the critical role played by waterproofing in today's structures. Structural Systems has a track record of over 20 years of installing and underwriting the performance of waterproofing systems. Our total independence from product suppliers guarantees that we always specify the system which best suits each project. In addition, all works are meticulously planned and supervised by professional project managers, resulting in industry-leading quality standards. Typical Waterproofing works undertaken by SSL include: Roof waterproofing & drainage works Facade reconstruction Window sealing or replacement External terraces and balconies Bathrooms and internal wet-area sealing >>>
    View the product on structuralsystemsuk.com STRUCTURAL SYSTEMS
    MEMBRANES - CHALLENGER SBS P&R

    MEMBRANES - CHALLENGER SBS P&R
    Polyester Based Cap Sheets and UnderlaysThe Challenger products form a simple range of roofing membranes, which are suitable for domestic and commercial applications. Challenger SBS membranes have a polyester base for toughness and durability and an SBS modified bitumen coating. Green slate surface membranes are available for use as cap-sheets without the need for protection; sand surfaced membranes are used as underlays or where additional surfacing in the form of chippings or promenade tiles will be provided. Traditional pour & roll application Tough polyester bases SBS modified bitumen coating 10 year material and labour guarantee if installed by a Registered Contractor >>>
    View the product on ruberoid.co.uk Ruberoid Building Products
    DRYBASE VAPOUR MEMBRANE

    DRYBASE VAPOUR MEMBRANE
    DryBase Vapour Membrane is a single-pack waterproofing system that is supplied ready to use straight from that tub or pail. The product is supplied as a black or white liquid with a consistency similar to that of thick emulsion paint. Once applied, the product cures to form a membrane that is flexible, elastic and resistant to abrasion and UV light. DryBase Vapour Membrane is water-based and safe to apply onto damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour. >>>
    View the product on safeguardeurope.com/ Safeguard Europe
    SELF-ADHESIVE MEMBRANES - COLDSEAL

    SELF-ADHESIVE MEMBRANES - COLDSEAL
    Self-Adhesive Cap Sheet and UnderlayColdseal is a two-layer, high performance, self-adhesive system that is ideal for replacing an existing roof covering or installing a new waterproof surface on a properly prepared deck. Coldseal has been specially developed to make flat roofing more straight-forward and economical for the jobbing builder, small roofer or experienced DIYer, to a professional quality standard. Ideal for garages, dormer windows, porches and extensions to habitable buildings. No need for hot bitumen, gas torches or messy liquids Simple installation – only basic skills and tools required Clean and easy to handle, backing simply strips away Tough and durable BBA Certification >>>
    View the product on ruberoid.co.uk Ruberoid Building Products
    DRYZONE DAMP-PROOFING CREAM

    DRYZONE DAMP-PROOFING CREAM
    The Dryzone damp-proofing cream is introduced into a series of 12mm holes drilled into the mortar course by means of a simple applicator gun. Once the Dryzone is installed, it diffuses before curing to form a water-repellent resin. This prevents the damp from rising up the wall. Dryzone has a number advantages over conventional chemical injection damp-proofing systems for both the contractor and the householder: * Quick to install Up to 3 times faster than standard damp-proofing injection systems. * Simple to install Less scope for operator error * Concentrated formulation Eliminates the need to introduce large volumes of liquid carrier into the wall. Dryzone is over four times stronger than many competing products. >>>
    View the product on safeguardeurope.com/ Safeguard Europe
    SUPERBASE FIREBLOC P&R

    SUPERBASE FIREBLOC P&R
    Fire Performance Roofing UnderlayThis product forms part of the Superflex FireBLOC® pour and roll high performance roofing system which is LPCB approved and provides long term waterproofing performance. Superbase FireBLOC P&R utilises a 180 g/m² polyester base, is coated with SBS modified bitumen and is used as an underlay, giving total system fire performance. The product is sand surfaced.Roll Size: 16m x 1mRoll Weight: 34kg >>>
    View the product on ruberoid.co.uk Ruberoid Building Products
    HUMIDISTAT AIR VENTS

    HUMIDISTAT AIR VENTS
    Humidistat Air Vents are humidity-controlled extractor fans designed to extract damp air from buildings as part of a condensation-control strategy. The fans have an inbuilt relative humidity sensor which causes them to operate when a predermined level of relative humidity is reached. Humidistat Air Vents are available in two sizes: * 100mm (4-inch) - For small areas such as bathrooms and toilets. * 150mm (6-inch) - Suitable for kitchens and larger bedrooms. >>>
    View the product on safeguardeurope.com/ Safeguard Europe
    SUPERBASE FIREBLOC T-O

    SUPERBASE FIREBLOC T-O
    Fire Performance Roofing UnderlayThis product forms part of the Superflex T-O FireBLOC® high performance roofing system which is LPCB approved and provides long term waterproofing performance. Superbase FireBLOC T-O utilises a 180 g/m² polyester base, is coated with SBS modified bitumen and is used as an underlay, giving total system fire performance.The product is sand surfaced, with printed heat dispersible polyethylene on the reverse.Roll Size: 16m x 1mRoll Weight: 40kg >>>
    View the product on ruberoid.co.uk Ruberoid Building Products
    POZIDRY POSITIVE PRESSURE SYSTEM

    POZIDRY POSITIVE PRESSURE SYSTEM
    One approach to the treatment of widespread condensation in a property is to use a 'positive pressure system.' This consists of a slow speed fan set into the ceiling. It draws air into the roof space from the outside through the eaves, and gently pushes it into the property. This causes a slight internal positive pressure, continually pushing out any moisture-laden air. Safeguard supply the the Airflow Pozidry system which has the following benefits: * Selectable air capacities to suit house volumes up to 400m³, or floor area up to 150m². * Uses latest LoWatt technology motor for low running costs. * Ultra-low sound level. * Comes complete with ceiling diffuser, flexible duct worm drive clips and anti-vibration mounts. * 5 year guarantee (upon registration). >>>
    View the product on safeguardeurope.com/ Safeguard Europe
    SUPERFLEX P&R FIREBLOC MEMBRANES

    SUPERFLEX P&R FIREBLOC MEMBRANES
    Fire Performance Roofing MembranesSuperflex FireBLOC® high performance roofing membranes are LPCB approved and provide long term waterproofing performance. The combination of Permanite FireBLOC® technology, polyester bases for toughness and SBS polymer modified bitumen coatings for flexibility, ensures that Superflex FireBLOC® membranes have the properties to cope with the demands of modern building techniques and achieve the highest UK fire ratings. The products are designed for application in hot bonding bitumen or cold adhesives. >>>
    View the product on ruberoid.co.uk Ruberoid Building Products
    PROBOR 20 WOOD PRESERVATIVE GEL (HSE NO. 6422)

    PROBOR 20 WOOD PRESERVATIVE GEL (HSE NO. 6422)
    ProBor 20 is a ready-for-use wood preservative gel based on boron, a naturally occurring mineral with a long history of use. It is used for the treatment of dry rot and wet rot in larger dimension timbers (up to 25mm x 75mm). It is also effective against wood-boring insects and is particularly useful when treating infestations of Deathwatch Beetle. The high level of active ingredient in ProBor 20, combined with its gel formulation provide for excellent penetration into timber - particularly damp timbers which are particularly vulnerable to fungal attack (dry rot and wet rot). >>>
    View the product on safeguardeurope.com/ Safeguard Europe
    SUPERFLEX T-O FIREBLOC

    SUPERFLEX T-O FIREBLOC

    Fire Performance Roofing MembranesSuperflex T-O FireBLOC® high performance roofing membranes are LPCB approved and provide long term waterproofing performance. The combination of Permanite FireBLOC® technology, polyester bases for toughness and SBS polymer modified bitumen coatings for flexibility, ensures that Superflex T-O FireBLOC® membranes have the properties to cope with the demands of modern building techniques and achieve the highest UK fire ratings. The products are specially designed for torch (or hot air) application and are suitable for both new build and refurbishment applications. >>>
    View the product on ruberoid.co.uk Ruberoid Building Products
    PROBOR DB AND PROBOR 10 BORON-BASED WOOD-PRESERVATIVES

    PROBOR DB AND PROBOR 10 BORON-BASED WOOD-PRESERVATIVES
    ProBor DB and ProBor 10 are liquid wood-preservatives based on boron, a naturally occurring mineral with a long history of use. ProBor DB is supplied as a concentrate in 6-litre packs which dilute with water to make 25 litres. ProBor 10 is supplied in 5 and 25-litre packs as a ready-for-use solution. In their ready-for use form, both products have an active ingredient content of 10% and can be applied by brush or spray. They are suitable for the treatment of woodworm in all dry timbers and as part of a dry rot and wet rot control strategy in smaller dimension timbers (up to 19mm x 38mm). For the treatment of dry rot and wet rot in larger dimension timbers, ProBor 20 or ProBor 50 should be used. >>>
    View the product on safeguardeurope.com/ Safeguard Europe
    TORCH-ON MEMBRANES - ADESSO APP T-O

    TORCH-ON MEMBRANES - ADESSO APP T-O
    Adesso Torch is a range of polyester based, slate surfaced torch-on cap sheets, coated with a high softening point APP modified bitumen coating. The embossed backing helps rapid dispersion of the torching film, making application fast and secure. Adesso Torch membranes provide reliable and effective flat roof waterproofing, combining the qualities of excellent performance, handling characteristics and economy. They can be applied onto suitable pour and roll or torch-on underlays as part of a built-up system, or as a refurbishment overlay to existing asphalt or selected mineral surface felt. >>>
    View the product on ruberoid.co.uk Ruberoid Building Products
    RENDERGUARD GOLD

    RENDERGUARD GOLD
    Renderguard Gold is a high-specification plaster additive that forms an integral part of the Safeguard Damp-proofing System (BBA Certificate Number 97/3363). Following the installation of a remedial damp-proof course (using Dryzone damp-proofing cream or Dampcheck Plus) correct re-plastering is of the utmost importance. Even though the damp-proof course is effective, hygroscopic salts introduced by the rising damp may cause moisture to be attracted to the wall. >>>
    View the product on safeguardeurope.com/ Safeguard Europe
    TORCH-ON MEMBRANES - PERMATORCH 4.5

    TORCH-ON MEMBRANES - PERMATORCH 4.5
    Permatorch 4.5 is a next generation range of high performance modified, torch applied roofing cap sheets. These products combine the qualities of a specially formulated high softening point modified bitumen coating with a tough high tensile strength polyester base, providing optimum handling characteristics and long term durability, making it the best all-round performing torch-on in its class. The membranes can be used for both new work and refurbishment projects, and can be supplied with up to a 15-year guarantee. Permatorch 4.5 can be used with Permanite’s Talc 4mm Torch Underlay, or other Universal Torch Underlays, depending on the specification and system performance required. >>>
    View the product on ruberoid.co.uk Ruberoid Building Products
    SAFEGUARD ECS EPOXY FLOOR COATING

    SAFEGUARD ECS EPOXY FLOOR COATING
    ECS Epoxy Floor Coating is a two-part water-dispersed epoxy resin product consisting of a pigmented base resin component and a water-dispersed hardener component. The two parts are mixed thoroughly before use with a mechanical mixer. Once mixed, ECS Epoxy Floor coating can be applied by brush or lambs wool roller to provide a decorative coating which is easily cleaned. Areas of application include: * Floor and wall coating for kitchens and other food-processing areas * Warehouse and storage areas * Light industrial factory areas to give resistance to foot and light vehicular traffic * Treating damp problems in solid concrete floors. >>>
    View the product on safeguardeurope.com/ Safeguard Europe
    TORCH-ON MEMBRANES - TURBO TORCH

    TORCH-ON MEMBRANES - TURBO TORCH
    The Turbo Torch range of cap sheets and underlays has been specifically developed to provide the perfect combination of long term performance, ideal handling characteristics and rapid torch-on installation.The unique Turbo-Flow polymer modified bitumen coating melts faster with less gas/heat required, rapidly achieving optimum bond strength, and then cools quickly to reduce foot marking and slumping. Turbo Torch membranes are polyester based, with the specifically blended Turbo-Flow SBS polymer modified bitumen coating, ensuring high tensile strength, excellent low temperature flexibility and guaranteed long-term performance. >>>
    View the product on ruberoid.co.uk Ruberoid Building Products
    VANDEX INJECTION MORTAR (VIM)

    VANDEX INJECTION MORTAR (VIM)
    Vandex Injection Mortar (VIM) is a product specially developed to stop rising damp in old brick and stonework structures, granite boulder walls, etc... Before application, Vandex Injection Mortar is mixed with water for 3-5 minutes to form a slurry. 22mm diameter holes are then drilled in the masonry at 110mm centres (alternatively 30mm holes can be drilled at 160mm centres). The mixed product is then injected into the holes using a hand caulking gun or grout pump. >>>
    View the product on safeguardeurope.com/ Safeguard Europe




      Search    
     
     
     
    Search
    See all of the sector's products : Building - Public works