Screwdrivers: suppliers, wholesalers and manufacturers on Hellopro
Search   


Screwdrivers :

35 products
Select the category
    Selection of 35 products among 35
    CEMENT SCREW FEEDERS - ES

    CEMENT SCREW FEEDERS - ES
    As a customized version of the modular TU Screw Conveyor System, ES Screw Conveyors are manufactured in carbon steel with a suitable surface finishing and powder coating. They are made up from a tubular trough that is equipped with at least one inlet and outlet spout, a welded flange at each tube end, helicoid screw flighting welded on a centre pipe with a coupling bush at each end, two end bearing assemblies complete with self-adjusting shaft sealing unit (one of the bearing assemblies incorporated in the drive unit), a number of intermediate hanger bearings depending on the overall length of the screw conveyor. Furthermore, ES Screw Conveyors are equipped with a gear motor that suits the application. ES Screw Conveyors are of the medium-heavy-duty type. >>>
    View the product on wameng.com WAM ENGINEERING LTD
    CONSUMER UNITS > WYLEX CONSUMER UNIT & 10 MCB'S

    CONSUMER UNITS > WYLEX CONSUMER UNIT & 10 MCB'S
    Free VDE Screwdriver Set Worth £19.99 ! 12-way flexible insulated split-load consumer unit. Comes with 100A DP Switch and 80A 30mA RCD. Also includes 3 x 6A, 2 x 16A, 4 x 32A, 1 x 40A 6kA MCBs, 2 blanks and a free VDE screwdriver set worth £19.99. CSU to BS EN 60439-3. - Flexible Configuration - 10 x B-Type 6kA MCBs Included - Clear Visor for Easy Circuit Identification - Includes 5-Piece VDE Screwdriver Set >>>
    View the product on screwfix.com Screwfix Limited
    SID 144-A CORDLESS IMPACT SCREWDRIVER

    SID 144-A CORDLESS IMPACT SCREWDRIVER
    Technical Data Battery energy 37.4 Wh Weight in accordance with EPTA-Procedure 01/2003 1.6 kg Rated voltage 14.4 V Battery capacity 2.6 Ah Battery type Li-ion Adjustable torque Yes Max. torque, setting 1 105 Nm Max. torque, setting 2 140 Nm A-weighted sound power level acc. EN 60745 104 dB (A) A-weighted emission sound pressure level acc. EN 60745 93 dB (A) Hammering speed (under load 100) 3400 impacts/minute Approvals CE, UL Chuck style 1/4 in hexagon socket with ball-notch retention Variable speed switch Yes Reversing switch Yes Usage Disclaimer Corded and cordless impact tools are not torque controlled power tools. Impact tools are not recommended for fastening screws or anchors that require specified torque values. Lifetime Service 2 years Width (Imperial) 2.8 in Length (Imperial) 6.3 in Length 162 mm Width 73 mm Max. torque, 2nd gear (Imperial) 1244 in-lb Anchor size 7.5 mm Max. torque, 2nd gear 140 Nm Max. torque, 1st gear (Imperial) 933 in-lb Max. torque, 1st gear 105 Nm Anchor size (Imperial) 1/4 in Anchor type HUS Speed 2 (no load) 2700 rpm Speed 1 (no load) 2100 rpm Base materials Concrete, Wood, Steel >>>
    View the product on hilti.co.uk Hilti (GB) Ltd
    DIAL MEASURING SCREWDRIVERS

    DIAL MEASURING SCREWDRIVERS
    Versatile high-tech tools for Quality Control, Research and Development and Assembly applications For the precise measurement and application of low torque values with bi-directional operation, available in Male square drive or Female hexagon drives. Perfect for a wide variety of applications. Can be used in track or memory modes, with an integral maximum reading memory system that gives confirmation of the maximum torque applied. Ideal for electronics, electrical, domestic appliance and office equipment industries. >>>
    View the product on torqueleader.com MHH Engineering Co Ltd
    EXTRACTING SCREW FEEDERS - ED TYPE

    EXTRACTING SCREW FEEDERS - ED TYPE
    ED-type Screw Feeders consist of two parallel mounted screws of different diameters and of a flap valve integrated in the outlet spout. The particular design of the ED Screw Feeder and a minimum clearance between screw flight and trough keeps material residue very low, guarantees high feeding precision and efficient cleaning of the inside screw feeder components. Two parallel screws also mean a wide feeding section that facilitates material discharge from the silo or hopper above. >>>
    View the product on wameng.com WAM ENGINEERING LTD
    ERGO QUICKSET SCREWDRIVERS

    ERGO QUICKSET SCREWDRIVERS
    Ergonomically Designed Calibrated Screwdrivers Principally used for fastenings with low torque values in electrical, electronic and instrument assembly work. Quickset calibrated screwdrivers, enhanced with an ergonomically designed rubber handle, to improve comfort and grip. Features the same micrometer style calibrated adjustment scale and smooth slip free action as the traditional Quickset Screwdriver. As well as 1/4” female hex, and 1/4” square drive, QSN40, QSA60Z and QSA 4 are available with a 4mm female hex drive suitable for miniature screwdriver blades and accessories. >>>
    View the product on torqueleader.com TORQUELEADER
    GENERAL PURPOSE TOOL KIT IN TOUGH OPEN TOTE BAG

    GENERAL PURPOSE TOOL KIT IN TOUGH OPEN TOTE BAG
    Save 50% On This General Purpose Tool Kit ! General purpose tool kit includes 4.8V screwdriver, chrome vanadium steel screwdrivers with soft-grip handles, chrome vanadium screwdriver bits in storage case, magnetic torpedo level and hard-point teeth tool box saw, all in a tough open tote bag. 47 Piece set. 10 x blades with plastic box; 14" toolbox saw; 9" torpedo level; 100pc fastener kit; 7 x torx hex key; 7 x metric hex key; 8" scissors; mini hacksaw; 12oz claw hammer; 4 x screwdriver: slotted 5 x 75, 6 x 100mm, PH#1 x 75mm, PH#2 x 100mm; magnetic bit driver; 6 x precision screwdriver: PH#0, PH#1, SL1.4, 2.0, 2.4, 3.0mm; 10 x Chrome Vanadium bits with storage case: slotted 3, 4, 5, 6, PH#0, PH#1, PH#2, PH#3, T15, T20; 6" long-nose pliers; 10" waterpump pliers; 6" adjustable wrench; utility knife; 4.8V screwdriver. >>>
    View the product on screwfix.com Screwfix Limited
    FLEXFLO MICRO-BATCH FEEDERS - MBW SERIES

    FLEXFLO MICRO-BATCH FEEDERS - MBW SERIES
    The MBW Micro-Batch Feeder for continuous volumetric feeding of powdery or granular materials consists of a SINT® engineering polymer FLEXFLO body with integrated feeder outlet pipe, a feeder screw and a drive unit. MBW series Micro-Batch Feeders for powder and granular product feeding are particularly suitable for free flowing and moderately flowing materials which do not tend to pack under pressure. Fed through a bag opening hopper, a bulk bag discharger, or another feeding device, the FLEXFLO body in SINT® engineering polymer with its particular geometry ensures constant material flow and feeding through the feeder screw. >>>
    View the product on wameng.com WAM ENGINEERING LTD
    PSE SCREWDRIVERS

    PSE SCREWDRIVERS
    Based on the successful TLS range of pre-set torque limiting screwdriver, the PSE range incorporates an ergonomic rubber handgrip offering a high degree of Operator comfort. Ideal for use in production areas where the same torque must be accurately and reliably repeated. They must be pre-set using a torque analyser. 4 model range covering torque values from 0.5cNm to 13.50Nm, with ¼” female hex for use with screwdrivers blades. Bi-directional operation with slipping action that eliminates over tightening. >>>
    View the product on torqueleader.com TORQUELEADER
    MICRO-BATCH FEEDERS WITH AGITATOR - MBF SERIES

    MICRO-BATCH FEEDERS WITH AGITATOR - MBF SERIES
    The MBF Micro-Batch Feeder for continuous volumetric feeding of powdery or granular materials consists of a steel-reinforced SINT® engineering polymer body (optionally body entirely manufactured in stainless steel), a horizontally mounted rotating agitator tool, a feeder screw beneath the agitator tool, a feeder pipe enclosing the protruding feeder screw, one drive unit each for agitator and feeder screw. Tests on product flow and material stress have been carried out to establish optimum body geometry. Agitator and feeder tool geometry and materials have also been tested before choosing an optimal steel and engineering SINT® polymer composite. MBF series Micro-Batch Feeders are supplied in food-grade versions with FDA-approval on request. >>>
    View the product on wameng.com WAM ENGINEERING LTD
    QUICKSET SCREWDRIVERS

    QUICKSET SCREWDRIVERS
    Particularly suitable for fastenings with low torque values in electrical, electronic and instrument assembly work. Quickset Torque Screwdrivers incorporate a calibrated adjustable scale in the body of the tool, enabling rapid adjustment to different torque settings without the need for ancillary torque equipment. (Available with Imperial and ISO Metric scale). Quickset Screwdrivers also use smooth ‘slip free’ technology- completely eliminating the possibility of over-tightening. This mechanism works in both clockwise and anti-clockwise directions- without the need for adjustment. Available with 1/4” square drive for use with nut sockets, or 1/4” female hexagon for use with screwdriver bits and blades, giving a wide range of applications. >>>
    View the product on torqueleader.com TORQUELEADER
    MICRO-FEED SCREWS - SPL TYPE

    MICRO-FEED SCREWS - SPL TYPE
    SPL and SPS-type Micro-Feed Screws are auxiliary screws combined with a larger main screw feeder. Before reaching the set feed rate the main screw feeder is stopped by a proximity switch to allow the Micro-Feed Screw, which is flanged beneath an opening in the pre-outlet section of the main screw feeder pipe, to feed the missing quantity of material with high accuracy through the outlet of the main screw feeder into the weigh hopper. >>>
    View the product on wameng.com WAM ENGINEERING LTD
    TORQUE LIMITING SCREWDRIVERS

    TORQUE LIMITING SCREWDRIVERS
    Range of production screwdrivers- ideal in an environment where the same torque value must be reliably and accurately repeated. They must be set using a calibration Analyser. Smooth, bi-directional slipping mechanism completely eliminates the possibility of over tightening. TLS models available with 1/4” female hex for use with screwdrivers blades and accessories. Minor, Standard and TLS 1360 models available with both 1/4” female hex and 1/4” square drive for use with nut sockets. Tamper proof adjustment eliminates reliance on Operator skill and gives control to the Quality Department. >>>
    View the product on torqueleader.com TORQUELEADER
    SCREW FEEDERS WITH AGITATOR - DO

    SCREW FEEDERS WITH AGITATOR - DO
    DO Screw Feeders are SU-type Screw Feeders (see page) which are equipped with an additional inlet hopper including an agitator tool for better material discharge into the feeder inlet. Complete SU-type standard screw feeder (see page on SU-type screw feeders) Agitator tool unit consists of flanged rectangular casing, folded blade-type agitator tool shaft, and separate WAM® gear motor Agitator tool facilitates loading of the screw feeder >>>
    View the product on wameng.com WAM ENGINEERING LTD
    SINGLE SHAFT SCREW FEEDERS - SU

    SINGLE SHAFT SCREW FEEDERS - SU
    According to the cross section of the silo outlet, SU-type Single Shaft Screw Feeders are available with standard U-shaped or with flared V-section trough. In a light-duty version, SU-Feeders are used for flour and materials with similar bulk density and properties. For animal feed and similar products a heavy-duty version is available. SU Screw Feeders are available with ATEX, zone 22 certification. >>>
    View the product on wameng.com WAM ENGINEERING LTD
    TAPERED TWIN SHAFT SCREW FEEDERS - BU

    TAPERED TWIN SHAFT SCREW FEEDERS - BU
    The BU Twin Shaft Screw Feeder is equipped with a tapered inlet trough that follows the shape of the tapered inlet sections of the screws, enclosing them almost completely from below. BU are manufactured from carbon steel. The upper trough flange is fitted to match the outlet of the bin / hopper. The BU Twin Shaft Screw Feeder is an option for users who require an efficient discharging feeder from bins or hoppers. The BU has been specially designed for handling of non homogeneous products (wood chippings, paper, etc.), materials from the flour milling industry (bran, flour, etc.), and bridging products (sawdust, soy, etc.). BU Screw Feeders are available with ATEX, zone 22 certification. >>>
    View the product on wameng.com WAM ENGINEERING LTD
    STATIONARY SENSOMAT™ SCREWDRIVER SPINDLES

    STATIONARY SENSOMAT™ SCREWDRIVER SPINDLES
    Stationary SENSOMAT™ Screwdriver Spindles Seating-Torque range from 0.3 - 5.0 Nm (2.7 - 44.25 in.lbs) Torque Controlled Screwdriver Spindles with Function Control and Depth Actuated Dual Torque output When the torque required to drive a screw is higher or about the same as the final torque required to seat the screw, an automatic screwdriver will shut-off, even if the screw is not assembled all the way. If the torque of the clutch is increased, the screw will strip. The - SENSOMAT-ULTRA, a subsequent development of the reliable - MINIMAT-ULTRA Control Screwdriver, drives the screw using the full torque generated by the motor. Short before the screw reaches final depth, the MINIMAT-clutch is released and the driver will shut off at the preset torque value. The screw is fully assembled, without being stripped. The result: the screw is seated correctly! Typical SENSOMAT applications are where thread cutting, thread rolling or self-drilling screws are being used. >>>
    View the product on deprag.de Deprag France
    HANDHELD AUTOMATIC SCREWDRIVER - MICROMAT™

    HANDHELD AUTOMATIC SCREWDRIVER - MICROMAT™
    Torque: 0.02 - 0.7 Nm / 3 - 97 in.oz the lowest torque capacity available on the market extreme high Torque Accuracy and Repeatability slighty larger than a ball point pen ergonomic design, long life, low noise The - MICROMAT screwdriver excels in the screw assembly to extreme small torque values, down to its minimum capability of 0.02 Nm (3 in.oz). The extremly high torque accuracy of the MICROMAT clutch operates similar to the proven principle of all disconnect and shut-off clutches. The pre-set torque will be held, independent of use of operation, air pressure fluctuations and screw joint. For ornamental screws with a scratch sensitive surface, we recommend the use of our MICROMAT screwdrivers with an integrated seed-function. This option allows the bit to engage with the screw drive at a lowered speed. Once full down-pressure is applied, the screw is then assembled with the rated full speed. For this screwdriver type we recommend a possibility of interruption of air supply. >>>
    View the product on deprag.de Deprag France
    AUTO STROKE SCREWDRIVER FOR SCREWFEEDERS: ERGOMAT™-Z

    AUTO STROKE SCREWDRIVER FOR SCREWFEEDERS: ERGOMAT™-Z
    When using Screwfeeders with hand-Schrewdrivers, it is necessary for the bit to retract, so that a new screw can fall into the feed-channel. With the ERGOMAT-Z driver, this stroke is performed automatically within the driver. Two components, clutch bearing and mouthpiece guide, are already integrated with the screwdriver housing. The stroke of the driver is being activated by the control of the Screwfeeders immediately after the screw is fed. The driver with the bit is positioned immediately above the screw head. At start of driver, the screw cannot be pushed back into the mouthpiece. Because of the integrated stroke, the hand guides the driver much closer to the screw hole. Both options simplify the positioning process and decrease handling. Additionally the ERGOMAT-Z motor size 2.4 offers a secondary automatic stroke feature. When compared to a driver with a mounted mouthpiece guide, where the vertical stroke must be executed manually, the bit of the ERGOMAT-Z driver moves independently out of the mouthpiece, once the driver has started. This feature acomplishes advantage that the nose piece no longer comes in contact with the part which prevents a scratching or scuffing of surfaces. The driver can be held directly above the moutpiece. >>>
    View the product on deprag.de Deprag France
    STATIONARY CONTROL SCREWDRIVER SPINDLES

    STATIONARY CONTROL SCREWDRIVER SPINDLES
    Torque range from 0.02 to 140 Nm / 0.2 to 1240 in.lbs with integrated Function Control The - Control Screwdrivers assemble screws to torque and measure that torque more accurately than any subsequent testing. They tighten and test the assembly in one operation. The screw joint, hard or soft, and air pressure fluctuations have no influence on the MICROMAT or MINIMAT clutch. The torque of the spindle can be pre set. Control Screwdrivers are available in right rotation, left rotation or reversible, with push to start or remote start option. These tools can be used without lubrication: This should however only be done in specific applications. Using a tool without lubrication will decrease it's lifespan. The 5 available motor sizes with a minimum of 3 gear variations each, and the possibility to combine motorsize 2 and 3 drivers with off-set-/or reduction gearings off different gear ratio to minimize the center distance or to increase the torque value, fulfill a wide spectrum of requirements in regards to torqueand speed. >>>
    View the product on deprag.de Deprag France




      Search    
     
     
     
    Search
    See all of the sector's products : Assembly