Selection of 45 products among
47
HAPSITE® VIPER CHEMICAL IDENTIFICATION SYSTEM WITH 267 SURFACE SAMPLER
Efficiently collects a sample and delivers fast analaysis of CWAs in the field for life-saving decisions.
The vehicle-integrated HAPSITE Viper, with an innovative 267 Surface Sampler, uses our
proprietary infrared probe to quickly screen for trace amounts of chemical contamination - never touching the ground. Simply integrated into a vehicle's central control system, HAPSITE Viper provides reliable, confirmatory data on-site on semi-volatile and volatile chemical warfare agents from soil, air, snow and ice - in minutes. And this super-sensitive, field-proven gas chromatograph/mass spectrometer (GC/MS) is easily removed for use where man-portable mode will get the job done.
Features at a Glance:
* the only GC/MS with versatility to perform both vehicle-based and person-portable chemical reconnaissance operations
* unique all terrain 267 Surface Sampler for positive identification of low vapor pressure chemicals, such as HD and VX
* detects unknowns in the ppb and ppt range with unique microtrap concentrator
* fast, confirmatory results in the field directly comparable to laboratory GC/MS data
* flexible command set allows easy integration into any vehicle central control system
* space-saving design well suited for integration into confined vehicle quarters
* fast, efficient data transfer with Ethernet communications, wireless 802.11 and USB memory stick capability for data back-up/retrieval/storage of AMDIS and NIST data evaluation
* bright, graphical display for easy viewing under all lighting conditions
* weather-resistant and easy to decontaminate
* built-in Global Positioning System (GPS) records exact sampling location with date/time stamp for legally defensible data
>>>
View the product on inficon.com
INFICON
OIL & GAS MEASUREMENT - DUALSTREAM I ADVANCED SUBSEA
Dualstream I advanced Subsea
Subsea Experience
Dualstream I meters have been
implemented in shallow diver
accessible depths and in deepwater
water applications in up to 3000m
water. The fi rst
subsea Dualstream
meter was installed in 1994.
Key Benefi ts
• Intelligent on-line measurement
• Simple, cost effective and robust
fl ow spool
• Tried and tested instrumentation
• Simple Data Acquisition System
• Signifi cantly reduced operational
costs
• Digital communications enabling
reduced size and weight of
subsea meters
• Large installed base including
allocation systems
Applications
Reservoir management
• Optimise production
• Remote well monitoring
• HC gas and condensate fl ow rate
measurement
• Water breakthrough detection
Production allocation
• Royalty allocation
• Essential for economic
development of marginal fi elds
Background
Wet gas measurement is now an
integral part of most gas condensate
fi eld developments. Dualstream wet
gas fl ow meters have been utilized
in over 100 projects since the early
1990’s and have been a key factor in
enabling marginal fi eld development
providing wet gas allocation
measurements and enhancing
reservoir data.
Dualstream I
advanced (Subsea)
Solartron ISA’s advanced version
of the Dualstream I meter includes
an additional differential pressure
measurement to enable on-line
detection of changes in liquid
fraction. This system can be used
to reduce period well testing or to
calculate liquid fl ow rates in real
time thus alleviating the requirement
for well testing altogether. For this
reason Dualstream I advanced is
particularly applicable to subsea
fl ow rate measurement in reservoir
management, allocation of
hydrocarbon gas and condensate
and as an economic method of water
breakthrough detection.
Measurement Technique
• Dualstream Venturi, Pressure loss ratio
measurement, wet gas correction algorithm and
PVT calculation
Mechanical Specifi cation
• Standard Line Sizes 2” NB to 24” NB (larger sizes
on request)
• Pressure Class API 5K/10K API (15K & ANSI ratings
on request)
• Process Temperature Range -20 to 120°C
(-4 to 248°F) (higher ranges on request)
• Meter Body Material Duplex uns531803 as standard
• Weight dependant on NB/Pressure rating
• Overall length 5D (typical)
Installation Requirements
• Upstream Straight lengths – 3D to 10D (typical)
(calibrated spool supplied for allocation systems)
• Downstream Straight lengths – None (5D calibrated
spool supplied with thermowell for allocation
systems)
• Orientation Horizontal
Performance
• Uncertainty
– Gas Mass Flow Rate 2% (typical)
– Liquid ±10-20%
– Condensate PVT calculation water ±1 am3/h
(water or oil continuous fl ow)
• Repeatability
– Gas Mass Flow Rate
>>>
View the product on solartron.com
Solartron Mobrey Ltd
AQUARIA - AIR SAMPLERS - MICROBIOLOGICAL
Aquaria Microflow
MICROFLOW has been developed for air biocontaminants sampling in critical places (e.g. clean rooms, food plants, fermentation’s plants etc...).
MICROFLOW allows to verify and
quantify microorganism precence.
Autoclavable anodised aluminium sampling head, with conical holes:
- 60 mm head: 219 holes (ø 1 mm)
- 90 mm head: 380 holes (ø 1 mm)
Autoclavable anodised aluminium support plate
Bayonet head coupling system
Rechargeable battery operated. Battery Ni/Mh (memory effect free) with 4 hours battery life
Recharging battery in 3-4 hours
Manual, sequential and programmed sampling
Delay start function
Preset sampling flow rates:
30-60-90-100-120 l/min
Remote switch with infra-red rays control
Storing and displaying up to 99 samplings
Serial output interface for PC computer connection (optional)
Prompt in 5 languages:
Italian, English, French, German, Spanish
Dimensions: 300 x 120 x 140 mm (w x d x h)
Weight:
- Microflow 60: 1,3 Kg
- Microflow 90: 1,5 Kg
>>>
View the product on protrol.co.uk
Protrol Instrumentation Ltd
HAPSITE HEADSPACE SAMPLING SYSTEM
Performs Soil and Water Analysis On-Site, Decision-Quality Data On VOCs In Water, Wastewater, Soils And Solid Wastes
HAPSITE Headspace Sampling System enhances the capabilities of the HAPSITE
Portable Gas Chromatograph/Mass Spectrometer (GC/MS) to provide highly accurate, on-site analysis of volatile organic compounds (VOCs) in soil or water. With its fast and easy sampling, the system ensures immediate results in the field for occupational and environmental health and safety decisions.
The HAPSITE Headspace Sampling System, controlled through the HAPSITE Portable GC/MS user interface, is ready to analyze samples in minutes. Its rapid sample throughput means no time is lost waiting for reports, enabling immediate decision-making and response, if required. Twenty to twenty-five samples can easily be analyzed in an eight-hour day.
The system provides results equivalent to running EPA method 8260 in a laboratory, but within minutes and without leaving the site. This virtually eliminates chain-of- custody and sample-contamination problems.
The HAPSITE Headspace Sampling System for the HAPSITE Portable GC/MS provides environmental testing professionals with powerful analysis and confirmatory results, ease of use, and economy under the broad range of field conditions. It saves time and money when used to support waste-site remediation and investigation, testing for worker exposure to toxic compounds in manufacturing facilities, emergency response, or regulatory compliance.
>>>
View the product on inficon.com
INFICON
OIL & GAS MEASUREMENT - DUALSTREAM I ADVANCED TOPSIDE
Topside Experience
Dualstream I meters have been
implemented topside since
the early 1990’s and are now
considered the benchmark
system for wet gas measurement.
Hundreds of topside Dualstream
I
meters are now operational for
most operators around the globe.
Meters are being used to allocate
gas into third party fl ow lines or
on a ‘per well’ basis to optimize
production.
Key Benefi ts
• Intelligent on-line measurement
• Simple and Robust fl ow spool
• Standard Instrumentation
• Simple Data Acquisition System
• Signifi cantly reduced operational
costs
• Large installed base including
allocation systems
Applications
Reservoir management
• Optimise production
• Remote well monitoring
Production Allocation
• Royalty allocation
• Essential for economic
development of marginal fi elds
• HC gas and condensate fl ow rate
• Water breakthrough detection
Background
Wet gas measurement is now an
integral part of most gas condensate
fi eld developments. Dualstream
wet gas fl ow meters have been
utilized in over 100 projects since
the early 1990’s and have been
a key factor in enabling marginal
fi eld development providing wet
gas allocation measurements and
enhancing reservoir data.
Dualstream I advanced
(Topside)
Solartron ISA’s advanced version
of the Dualstream I meter includes
an additional differential pressure
measurement to enable on-line
detection of changes in liquid
fraction. This system can be used
to reduce periodic well testing or
to calculate liquid fl ow rates in real
time thus alleviating the requirement
for well testing altogether. For this
reason Dualstream I advanced is
particularly applicable to reservoir
management and allocation
applications on unmanned wellhead
platforms and as an economic
method of water breakthrough
detection.
Measurement Technique
• Dualstream Venturi, Pressure loss ratio
measurement, wet gas correction algorithm and
PVT calculation
Mechanical Specifi cation
• Standard Line Sizes- 2” NB to 24” NB (larger sizes
on request)
• Pressure Class ANSI Class 150 lb – 2500 lb / API
ratings on request
• Process Temperature Range -20 to 120°C
(-4 to 248ºF) (higher range on request)
• Meter Body Material Duplex uns S31803 as
standard
• Weight dependent on NB/Pressure rating
• Overall length 5D (typical)
Installation Requirements
• Upstream Straight lengths – 3D to 10D (typical)
(calibrated spool supplied for allocation systems)
• Downstream Straight lengths – None (5D calibrated
spool supplied with thermowell for allocation
systems)
• Horizontal Orientation
Performance
• Uncertainty
– Gas Mass Flow Rate ±2% (typical)
– Liquid ±10-20%
– Condensate PVT calculation
– Water ±1 am3/h (water or oil continuous fl ow)
• Repeatability
– Gas Mass Flow Rate
>>>
View the product on solartron.com
Solartron Mobrey Ltd
OIL & GAS MEASUREMENT - DUALSTREAM I SUBSEA
Dualstream I Subsea
Subsea Experience
Dualstream I subsea meters have
been implemented in the shallow
diver accessible depths of the
North Sea through to deepwater
water applications in the Gulf
of
Mexico, in up to 3000m water. The
fi rst subsea Dualstream meter was
installed in 1994. Meters are being
used to allocate gas into third party
fl ow lines or on a ‘per well’ basis to
optimize production.
Key Benefi ts
• Simple, cost effective and robust
fl ow spool
• Tried and tested instrumentation
• Simple Data Acquisition System
• Digital communications enabling
reduced size and weight
• Signifi cantly reduced operational
costs
• Large installed base including
allocation systems
Applications
Reservoir management
• Optimise production
• Remote well monitoring
Production allocation
• Royalty allocation
• Essential for economic
development of marginal fi elds
Background
Wet gas measurement is now an
integral part of most gas condensate
fi eld developments. Dualstream wet
gas fl ow meters have been utilized
in over 100 projects since the early
1990’s and have been a key factor in
enabling marginal fi eld development
providing wet gas allocation
measurements and enhancing
reservoir data.
Dualstream I (Subsea)
Solartron ISA’s subsea Dualstream
I meters are designed to be used
when additional facilities, typically
test separators, are available for
periodic well testing. The Dualstream
I system will correct the gas fl ow rate
for a known gas Mass Fraction based
on data generated during a well test.
This is a particularly cost effective
‘per wellhead’ wet gas fl ow rate
management system.
Measurement Technique
• Dualstream Venturi and wet gas correction algorithm
Mechanical Specifi cation
• Standard Line Sizes 2” NB to 24” NB (larger sizes
on request)
• Pressure Class API 5K/10K API (15K & ANSI ratings
on request)
• Process Temperature Range -20 to 120°C
(-4 to 248°F) (higher ranges on request)
• Meter Body Material Duplex unsS31803 as standard
• Weight dependant on NB/Pressure rating
• Overall length 5D (typical)
Installation Requirements
• Upstream Straight lengths – 3D to 10D (typical)
(calibrated spool supplied for allocation systems)
• Downstream Straight lengths – None (5D calibrated
spool supplied with thermowell for allocation
systems)
• Orientation Horizontal
Performance
• Uncertainty
– Gas Mass Flow Rate 5% (typical)
– Liquid Mass Flow Rate From well test
• Repeatability
– Gas Mass Flow Rate
>>>
View the product on solartron.com
Solartron Mobrey Ltd
OXOID AIR SAMPLERS - MICROBIOLOGICAL
OXOID EM0100a or EM0100S
This robust, high specification air sampler is designed to monitor microbiological air quality in controlled pharmaceutical, clinical and food processing environments, using
proven impaction technology that has been used reliably in quality assurance and infection control applications for many years.
The Oxoid Air Sampler, in distinctive Oxoid red, is compact and easily portable, making it suitable for monitoring air in a variety of locations, such as:
pharmaceutical clean rooms, manufacturing and filling areas
operating theatres, hospital pharmacies and other critical areas in hospitals
food processing and preparation areas.
The sampler is easy to use, with a simple keypad menu (in a choice of languages) to lead the user through a variety of preset or user-defined functions, including flexible sampling volumes, delayed start, multiple run and variable interval options. It can be operated manually or using an infra-red remote control – ideal for monitoring highly sensitive, closed environments.
The Oxoid Air Sampler has been shown to be efficient and reliable, with validation studies demonstrating a physical efficiency of 100% for particles 0.8 to 19.0 microns in size (BS EN ISO 14698-1:2003 Annex B). Once activated, the unit automatically samples air at a fixed rate of 100 litres per minute. Air is drawn through small holes in the sample head and directed onto the surface of an agar plate. A flashing LED shows that sampling is in progress and an audible signal indicates the end of the sampling period. The agar plate is then removed and incubated in order to assess levels of contamination. The Oxoid Air Sampler can accommodate 55mm and 90mm plates and has flexible plate holders which allows for slight variation in plate diameter. The unit is supplied with a 90mm sampling head as standard, with a 55mm sampling head available as an optional accessory.
Sample details (e.g. date, time, location, sampled volume and operator ID) are stored within the unit. This information is easily accessed and visualised on the alpha-numeric display or can be printed via a standard printer cable. It is also possible for data to be downloaded to a computer (using the Oxoid Air Sampler Software CD) for reporting and trend analysis.
The Oxoid Air Sampler is supplied fully calibrated with a calibration certificate traceable to recognised Standards. Furthermore, the sample head can be changed, or removed for cleaning, quickly and easily – without the need for recalibration. Calibration is recommended at six to twelve monthly intervals after purchase,
The new Oxoid Air Sampler complements the wide range of high quality environmental monitoring products available from Oxoid.
Oxoid provides a full range of suitable pre-poured culture plates for use with the Oxoid Air Sampler, including Tryptone Soya Agar and Sabouraud Dextrose Agar in 90mm and 55mm contact plate formats. These can be supplied irradiated and/or triple wrapped (including VHP impermeable packaging) as required.
>>>
View the product on protrol.co.uk
Protrol Instrumentation Ltd
OIL & GAS MEASUREMENT - DUALSTREAM I TOPSIDE
Topside Experience
Dualstream I meters have been
implemented topside since
the early 1990’s and are now
considered the benchmark
system for wet gas measurement.
Hundreds of topside Dualstream
I
meters are now operational for
most operators around the globe.
Meters are being used to allocate
gas into third party fl ow lines or
on a per well basis to optimize
production.
Key Benefi ts
• Simple and robust fl ow spool
• Standard instrumentation
• Simple data acquisition system
• Signifi cantly reduced operational
costs
• Large installed base including
allocation systems
Applications
Reservoir management
• Optimise production
• Remote well monitoring
Production Allocation
• Royalty allocation
• Essential for economic
development of marginal fi elds
Background
Wet gas measurement is now an
integral part of most gas condensate
fi eld developments. Dualstream wet
gas fl ow meters have been utilized
in over 100 projects since the early
1990’s and have been a key factor in
enabling marginal fi eld development
providing wet gas allocation
measurements and enhancing
reservoir data.
Dualstream I (Topside)
Solartron ISA’s topside Dualstream
I meters, are designed to be
used when additional facilities
test separators or tracer dilution
are available for periodic well
testing. The Dualstream I system
will correct the gas fl ow rate for a
known gas Mass Fraction based on
data generated during a well test.
This is a particularly cost effective
‘per wellhead’ wet gas fl ow rate
management system.
Measurement Technique
• Dualstream Venturi and wet gas correction algorithm
Mechanical Specifi cation
• Standard Line Sizes 2” NB to 24” NB (larger sizes
on request)
• Pressure Class ANSI Class 150 lb – 2500 lb (API
ratings on request)
• Process Temperature Range -20 to 120°C
(-4 to 248°F) (higher ranges on request)
• Meter Body Material Duplex unsS31803 as standard
• Weight dependant on NB/Pressure rating
• Overall length 5D (typical)
Installation Requirements
• Upstream Straight lengths – 3D to 10D (typical)
(calibrated spool supplied for allocation systems)
• Downstream Straight lengths – None (5D calibrated
spool supplied with thermowell for allocation
systems)
• Horizontal Orientation
Performance
• Uncertainty
– Gas Mass Flow Rate 5% (typical)
– Liquid Mass Flow Rate from well test
• Repeatability
– Gas Mass Flow Rate
>>>
View the product on solartron.com
Solartron Mobrey Ltd
