Service insertion sealants Annerseal 2763
Chemence Annerseal 2763 is used in service pipe installation. Its function is to seal the annular space between the newly inserted plastic pipe and the old steel conduit.
Very easy to apply with integral catalyst that eliminates need for mixing.
No mixing required .
provides an instant seal which gradually increases in strength to form a permanent vibration resistant plug.
Available in handy one litre cartridges.
Ideal for both yellow PE pipe and Serviflex.
Proven field reliability-trouble free continuous use for 15 years with an estimated 100,000 jobs satisfactorily completed.
Live and dead service insertions:-
annular sealing in service pipes
Service insertion sealants Annerseal 2763
Service insertion sealants cement grouts
Leaking screw joints on gas service pipes and service pipe risers
Full system treatment for sealing leaking joints on services and risers
Screwseal for sealing single joints on services and risers
Leaking joints on the gas distribution system
Chemence Anacure 2793 for sealing leaking joints on gas distribution mains
>>>
Chemical adhesives with assembly-actuated, fast-curing, vibration-resistant locking and sealing properties for a wide range of internal and external fastener applications.
Approved for use by automotive manufacturers worldwide, PRECOTE® microencapsulated pre-applied adhesives provide unmatched vibration resistance - even under the most extreme operating conditions - and a more reliable way of fastening components in place during assembly. PRECOTE® is assembly- actuated, fast-curing and vibration-resistant, making it ideal for use in a wide range of internal and external fastener applications.
PRECOTE® is a microencapsulated pre-applied chemical adhesives available in several strength grades and is suitable for all metallic fasteners, with many plated surfaces in thread sizes #8 (M4) and larger, and internal diameter sizes 1/4" (M6) and larger.
Advantages
Only thread adhesive with dual microencapsulation to maintain high integrity of chemical components.
No additional locking devices needed
Precise thread coverage every time
Increases productivity at the assembly line
Exceeds IFI-125 and IFI-525 and most automotive specifications
Can be applied on external or internal threaded fasteners
Assembly ready
Four year shelf life (once coated, PRECOTE® is unaffected by atmospheric conditions or high humidity)
Dry-to-touch, non-tacky finish
Non-toxic, assembler friendly
Environmentally friendly
>>>
Screw joint sealants
Chemence Screwseal for single joint application, comes as a disposable self-contained kit. Simply drill into the threads of the joint and inject Chemence TL90 thread sealant into the leak path to provide an instant cure to the leak.
Chemence Screwseal is ideal for gas service pipes and service risers of all sizes.
Suitable for both surface risers and risers buried in walls.
No need to cut off the gas supply.
A very easy to use permanent low cost repair.
No special tools needed.
Live and dead service insertions:-
annular sealing in service pipes
Service insertion sealants Annerseal 2763
Service insertion sealants cement grouts
Leaking screw joints on gas service pipes and service pipe risers
Full system treatment for sealing leaking joints on services and risers
Screwseal for sealing single joints on services and risers
Leaking joints on the gas distribution system
Chemence Anacure 2793 for sealing leaking joints on gas distribution mains
>>>
The original NYLOK® BLUE® self-locking, self-sealing, reusable fastener exceeds industry standards.
The NYLOK BLUE PATCH™ self-locking element is permanently spray bonded onto the threads of a fastener. When mating threads are engaged, the tough, resilient blue nylon patch element is compressed and a counterforce is created to establish a much stronger metal-to-metal contact and positive resistance to vibration and loosening.
Advantages
Exceptional vibration resistance
Reusable
Adjustable
Seals
Applicable to any head configuration
180° (std) or 360° (optional) radial coverage
Wide variety of patch locations and coverage
Easy to use in assembly
Non-toxic, assembler friendly
Environmentally friendly
Different levels of torque available
Applicable to a variety of materials and finishes
Compatible with different mating part materials
Resistant to lubricants, fuel, hydraulic fluids and most commercial solvents
Durable
Cost effective
No metal removal to reduce fastener strength or performance
Temperature range: -70°F to 250°F (-56°C to 121°C)
A NYLOK BLUE PATCH (known as TUF-LOK® in Europe) self-locking patch can be applied to your own fasteners, or ready-to-install self-locking fasteners can be supplied to meet your specifications. Screws as small as #00-90 (M1.0) can be processed and NYLOK BLUE PATCH self-locking elements can be applied with equal effectiveness to large diameter fasteners.
>>>
