Rubber and plastic: suppliers, wholesalers and manufacturers on Hellopro
Search   

Rubber and plastic :

1040 products
Select the category
Selection of 53 products among 1040
AUTOFORM SERIES MACHINE

AUTOFORM SERIES MACHINE
AUTOFORM Series - In line Thermoforming Machine - Sheet/Roll Feeding The CannonForma AUTOFORM Series has been designed for high production requirements, with production speeds up to 50% greater then the equivalent più POWERFORM machines. This machine is designed around the Powerform range but, to enhance the speed and the easy production, an automatic reel feed and guillotine system is included as standard. Also included as standard, pre-heating station allows valuable time to be saved as a second sheet can be loaded and pre-heated while the first sheet is still in the forming station. A pressure forming version of this machine is available and, for even greater flexibility, Autoform machines offer an optional sheet loading facility, which can be used instead of or in conjunction with reel feeding. Like the Powerform machine, the Autoform can process all thermoplastic materials. Like POWERFORM series, also this type of machines can include all systems for fast euipment changing, proportional pneumatic systems and sophisticated controls on heaters. >>>
View the product on thermoformers.org Cannon Shelley
LAMINATED GLASS CUTTING MACHINE - ADVALAM 46

LAMINATED GLASS CUTTING MACHINE - ADVALAM 46
The outstanding feature of the AdvaLam 46 is its high degree of automation. Additionally the optional Z stop positioning system makes handling easy. The maximum cutting width is 4600mm; exact positioning (with patented double gripper system) and the turning of sub-plates (with our patented vacuum turning device) is done automatically. For edge deletion the HEGLA TWIN module with two grinding wheels, 10mm and 20mm is installed on the positioning bridge. A cutting head for Float Glass (also can be equipped with the double cutting head TWINCUT) is optionally available in connection with a breakout bar. >>>
View the product on hegla.co.uk HEGLA MACHINERY
ALS NT AUTOMATIC LOG SLITTERS

ALS NT AUTOMATIC LOG SLITTERS
Diameters of 300/500/600/700mm 12/20/24/28" Widths 1650-2100mm 62"-84" NT features include: Automatic blade angle powered mandrel support automatic blade grinder twin axis servo control blade positioning to +/- 3 microns, up to 1,000,000 memory programmes for all your material and slitting parameters SIBTEC technology with automatic setting of all slitting parameters when changing materials Automatic greasing End of roll detector >>>
View the product on johnlack.com John Lack Equipment
CUTTING TECHNOLOGY: SPARE BLADES L 030/10

CUTTING TECHNOLOGY: SPARE BLADES L 030/10
Premium quality blades are dry. Lesser quality blades have to be oiled and packaged in moisture resistant paper to prevent rusting. Oiled blades will leave a residue on the mountboard for several cuts. They do not have the same level of sharpness and so require more effort when cutting through mountboard.* Dry premium quality blade giving a clean crisp cut from the first use* Made in England from the finest quality British Steel* Especially honed and finished to give the finest of cuts* Blades are double pointed and will cut at least 20 mounts* The same blades fit into the current bevel and vertical cutter and all our earlier models* Strong, convenient, concertina packaging for storage >>>
View the product on longridge.co.uk Longridge Mountcutters
LAMINATING MACHINE - POWERBOND

LAMINATING MACHINE - POWERBOND
The highly flexible Powerbond modular system allows 100cm sections of heating and cooling to be linked to provide a laminating tunnel to exactly fit the production purpose. The Reliant Powerbond modular system allows 1m sections of heating and/or cooling to be assembled together in any combination The modular system allows capacity of machine to fit the process parameters required Options for different levels of power rating and compression within each 1m are available A large range of standard widths available from 600mm to 3000mm. Additional widths available on request The Powerbond has a tunnel opening capacity up to 150mm in 0.1mm increments High pressure systems are available in the Powerbond HPC model for composites and pre-pregs where high pressure during the heating and cooling cycles is required >>>
View the product on reliant-machinery.com Reliant Machinery Ltd
ELETTROPNEUMATIC UNLOADERS T-III-E-T-800 IIIE

ELETTROPNEUMATIC UNLOADERS T-III-E-T-800 IIIE
IMM range (t):80-220 Drive Type:ElettroPneumatic Controller:Stec-CS1 Vertical Stroke (mm):800 Horizontal Stroke (mm):150 Traverse Stroke (mm):1600 Posture:90° fixed Dry Cycle Unload (s):2,13 Dry Cycle Overall (s):10,18 Max Loading Weight (kg):3 Power:AC 220/240±10% 50/60Hz Monophasis Electric consumption (kVA):900 Air Pressure (MPa):0.49 Air Consumption (Nl/cycle):19 IMM range min (t):80 IMM range max (t):220 >>>
View the product on star-europe.com Star Automation UK LTD
CENTRIBOARD INDUSTRIAL FABRICATION GRADE SHEET

CENTRIBOARD INDUSTRIAL FABRICATION GRADE SHEET
Centriboard A high specification grade for fabrication purposes manufactured to standard sizes made from recycled polypropylene. Other materials such as High and Low Density Polyethylene are also available. Sales Range Standard Sizes: 2440mm x 1220mm x 3, 4.5 and 6mm Colours: Black only Centriboard Material Recycled Polypropylene Surface Finish Smooth Colour Black Max Length 3660mm Max Width 1500mm Min Thickness 1mm Max Thickness 8mm >>>
View the product on centriforce.com Centriforce Products Ltd
GAIN IN WEIGHT GRAVIMETRIC DOSAGE SYSTEM SERIES CWS 3001

GAIN IN WEIGHT GRAVIMETRIC DOSAGE SYSTEM SERIES CWS 3001
Application - Extrusion - Blow moulding - Injection moulding Materials - Granule - Ground material Advantages - Accurate and reliable metering unaffected by material variations and features - Absence of periodical sampling operations - Exact quantification of material consumption - Thickness control in terms of grams per linear meter - Automatic control of layers proportions in case of co-extruded film Available in 5 versions for throughputs from 70 to 1600 kg/h. This new series of gravimetric dosage systems, easy to install and to use, can be fitted on all types of extrusion lines, blow moulding and injection moulding machines, for the gravimetric metering and blending of max. 6 components (polymers in granule, masterbatch, ground material). The gravimetric dosage system can be installed directly on the processing machine instead of the feed hopper or on the ground, enabling feeding of one or several processing machines. OPTIONAL This system can also be installed on co-extrusion lines. In this case, apart from the take-off and the grams/meter, the throughput of each extruder is controlled in order to obtain the correct value of each layer. >>>
View the product on enginplastdue.com ENGIN PLAST
BESIDE-THE-PRESS GRS 300

BESIDE-THE-PRESS GRS 300
############################################################################################################################################################################################################################################################### >>>
View the product on getecha.de GETECHA


< Début << Précedent 12
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Rubber and plastic