Selection of 40 products among
78
DOMIZ SLATE
SSQ Domiz slate is a blue/grey slate sourced from Spain. It offers good uniformity of colour and will complement Del Carmen slates
in a lighter colour. Suitable for specifications and available with
a 50 year guaranbtee, SSQ Domiz slate is classified Class A to the
French Standard.
Testing
Samples of SSQ Domiz have been tested in accordance with, and
comply with, the relevant sections of:
? BS 680: Part 2 :1971 – Pass
? French Standard P32/302 (1989) – Pass, Class A
Test certificates are available from SSQ on request.
Performance
Fire
The slate is non-combustible.
Optical
The colour of SSQ Domiz slate is totally natural and devoid of artificial
pigments. It does not fade in sunlight.
Climate
SSQ Domiz slate is non-porous and its very low coefficient of
expansion means that it is unaffected by changes in temperature.
Chemical and biological
The slate is stable with no adverse reaction in polluted environments
(e.g. acid rain).
Fixing
Fixing SSQ Domiz slates poses no problems for an experienced slater.
They can be fixed both by traditional methods or by the modern hook
system. SSQ can provide fixing details for both methods.
On roofs, SSQ Domiz slates are suitable for pitches as low as 17°,
subject to proper detailing and fixing. When fixed correctly, the slates
offer a life expectancy generally in excess of that of the building.
>>>
View the product on ssqgroup.com
SSQ Group
NATURAL SLATE - LA CORUNA
Fire: Crest Natural Slates are non-combustible
Water Resistance: The water absorption level is within the limits set down by BS680: Part 2: 1971. The slates also comply to this standard for
delamination, spitting and flaking when subjected to wetting and drying tests.
Chemical and Biological Resistance: Chemical and Biological Resistance: Unaffected by the sulphuric acid immersion test of BS680: Part2: 1971. Unaffected by chemicals in other building materials and pest and insect attack.
Durability: The life of a Crest Natural Slate will normally exceed that of the actual building itself
Storage and Handling: All slates are supplied in wooden pallets but any loose slates should be stacked carefully on their longer edges, ensuring that the bottom layer is on a firm level surface. Timber battens should be placed between layer. All slates should be handled carefully on site.
Cutting and Holing: This can be done by mechanical disc cutter or hand operated cutter. Holing can be done at source or on site.
Good Roofing Practice: Slates should be fixed in accordance with B.S. code of practice for slates and tiles BS5584: Part1. B.S. code of practice for workmanship on site, BS8000: Part 6: 1990 should be referred to.
Underlay: Roofing felt should be used and we recommend Crest Interfol, Standard or micro-perforated. Interperm 140 is also available for warm roofs.
Battens: 50 x 25mm battens are recommended, treated, not less than 1200mm in length, and free of any sign of decay, insect attack, knots or knot holes.
>>>
View the product on crest-bst.co.uk
Crest Brick Slate & Tile Ltd.
ROOFS - ELECTRIC SLIDING (RETRACTABLE) - IDS111SKY
There are very few things in the world that can enhance your home and quality of life like the IDS111SKY, providing a genuine sense of style, luxury and the focal point to any property, dreamed of
and desired by all homeowners. Truly letting you enjoy the best of the British weather, the ambience of your garden and the starlit night sky.
Special features
Suitable for all domestic and commercial applications
Custom manufactured to suit your requirements
Energy efficient and severe weather and snow-loading
Fully computerised auto-sensor which opens and closes in accordance with the weather conditions option
The robust construction can accommodate Folding Sliding Doors or Sliding Doors within the design
Full range of finishes, with polycarbonate or double glazed toughened glass units
Low Maintenance and fully guaranteed
Versatility in design
The electric sliding roof system is manufactured from extruded thermally broken aluminium profiles in a modular form, which makes the structure slim and light but incredibly strong; it also ensures minimum heat loss and prevents condensation. Thanks to its monoblock system, the electric sliding roof system can be offered in several styles and is individually designed to suit your own requirements, contact our technical department for details.
Pitch
The robust construction allows a maximum span of up to 6000mm - even greater in polycarbonate or linked modules - and can offer a clear unsupported opening span of up to 4000mm to incorporate folding sliding door or sliding door systems below. A multi-angle wall plate accommodates a roof pitch from 6o to 39o.
Ventilation
The IDS111SKY electric sliding roof has the option to be controlled by either a remote control handset or a computerised control panel, which has an outside sensor that provides three different functions:
When open, the roof will automatically close if rain or strong wind is detected. When closed, should the temperature outside become very cold the sensor will prevent the roof from being opened, causing damage to frozen seals. Furthermore should the inside temperature become uncomfortable an automatic venting position can be programmed, to a position without the risk of burglary. Thus the inside climate can be controlled manually at a touch of a button or regulate itself without the need of human intervention.
Weather seals
The system has been developed and extensively tested to withstand all possible weather conditions. The solid structure and interlinking weatherproof gasketry stands up perfectly to immense winds, wet conditions and snow loading.
Operating system
Roof panels are divided up into three tiered sections, with two sections sliding behind a fixed top section opening up to two-thirds of the roof. The panels are electronically operated by a bi-polar tubular motor, powered either by a 220-240V mains voltage or a small 24V version for swimming pool enclosures, providing smooth and virtually silent movement.
Appearance
There is a vast choice of finishes available. The standard finish is polyester powder coated to over eight different RAL colours: White, Beige, Olive Green, Forest Green, Blue, Red, Brown and Grey, other RAL colours (over 201 colours available), dual colour or wood grain effect are available for a nominal charge.
Complete system
I-D-Systems roof systems have been specially designed to complement our folding sliding doors and sliding doors systems.
>>>
View the product on i-d-systems.co.uk
I-D-Systems - Specialists in Folding & Sliding Door Systems
SEL SUDSTEX PERMAFILTER GEOTEXTILE
SEL Sudstex Permafilter® geotextile is a non-woven, dimpled, needle-punched geotextile that has been specifically designed for hydrocarbon pollution treatment in civil engineering applications (such
as filtration, separation, drainage, protection and reinforcement). Hydrocarbons are trapped by the geotextile whereas clean water is allowed to pass through. The entrapped hydrocarbons can then be biodegraded by naturally occurring micro-organisms providing a self-cleansing mechanism. The SEL Sudstex Permafilter® geotextile can be used stand-alone to provide treatment beneath any hardened surface, or as part of a treatment train within SUDS such as the SEL Source Control System or permeable pavements.
Why do you need it?
Urbanisation and land development are commonly associated with significant negative impacts on the environment (i.e. increasing water volumes and pollutant loads). In particular, diffuse pollution mobilised from impervious surfaces is recognised as a major cause of decline in the quality of controlled waters. The pollutants are specific to the land use and can include substances from atmospheric deposition, maintenance and deposits from exhausts and vehicle oil leaks.
General perception of pavements is that they are watertight structures; however, the majority of paved surfaces allow the ingress of water due to engineered water passages (e.g. gaps, expansion joints etc) or moreover pavement fatigue (i.e. cracks and fissures) all of which contribute to accumulation of diffuse pollution through contaminant transportation.
>>>
View the product on allpipe.co.uk
Allpipe Ltd
SLATE - DEL CARMEN
SSQ Del Carmen is specially and exclusively quarried from the Del Carmen quarry in North West Spain to offer customers a top of the range slate usually sought by demanding markets such as Germany or
France.
SSQ Del Carmen slate is a traditional riven slate with a distinctive texture. The blue-black colour is totally natural and does not fade in sunlight.
SSQ Del Carmen is a high-density slate that does not crack, when fixed properly. It is almost totally inert and shows no reaction in polluted atmospheres. It is also non-porous and will not support the growth of mosses or lichens. It is also unaffected by insect attack. Whereas most slates sourced from Spanish quarries have a transverse grain, Del Carmen slates are notable for the rare characteristics of a longitudinal grain.
The SSQ Del Carmen Ultra slate has been tested to international standards, including French Standard P32/302. This French Standard is widely known as the highest classification worldwide and the testing is carried out at the quarry on a yearly basis by the Laboratoire Natonal d’ Essais.
SSQ Del Carmen Ultra is supplied with a written guarantee of 75 years. Test certificates, an independent geological report and samples are available upon request. Please click here to request a copy of the report.
As a testament to the consistent high quality of SSQ Del Carmen slate, English Heritage and Historic Scotland have previously accepted the slate for the refurbishment of listed buildings. SSQ Del Carmen is also approved by Snowdonia National Park as an alternative to indigenous slate.
Extensive and regular testing coupled with centuries of experience prove that SSQ Del Carmen slates have their place among the very best roofing slates available.
Product Data
Fixing Del Carmen slates poses no problems for an experienced slater. They can be fixed both by the traditional nail method and by the modern hook system. SSQ can provide fixing details by both methods – please click here to request a copy.
On roofs, Del Carmen slates are suitable for pitches as low as 17°, subject to proper detailing and fixing.
When fixed correctly, Del Carmen slates offer a life expectancy generally in excess of that of the building.
Del Carmen slates are available across the UK through an extensive network of builders’ merchants, and are available throughout Europe and the US by contacting the SSQ Head Office.
Testing
Samples of SSQ Del Carmen have been tested in accordance with, and comply with, the relevant sections of:
BS 680: Part 2: 1971 – Pass
French Standard P32/302 (1989) – Pass, Class A
American Standard ASTM – Pass, S1
German Standard DIN 58201 – 52206 – Pass
Test certificates are available from SSQ on request. Please click here to request a copy.
Features and Benefits
Fire: The slate is completely non-combustible
Optical: The colour of SSQ Del Carmen slate is totally natural and devoid of artificial pigments. It does not fade in the sunlight.
Climate: SSQ Del Carmen slate is non-porous and its very low coefficient of expansion means that it is unaffected by changes in temperature.
Compatibility: SSQ Del Carmen is compatible with virtually all building products.
Chemical and Biological: The slate is stable with no adverse reaction in polluted environments (i.e. acid rain).
>>>
View the product on ssqgroup.com
SSQ Group
NATURAL SLATE - SANDRINGHAM DARK
Fire: Fire: Crest Natural Slates are non-combustible
Water Resistance: The water absorption level is within the limits set down by BS680: Part 2: 1971. The slates also comply to this standard for
delamination, splitting and flaking when subjected to wetting and drying tests.
Chemical and Biological Resistance: Unaffected by the sulphuric acid immersion test of BS680: Part2: 1971. Unaffected by chemicals in other building materials and pest and insect attack.
Durability: The life of a Crest Natural Slate will normally exceed that of the actual building itself.
Storage and Handling: Storage and Handling: All slates are supplied in wooden pallets but any loose slates should be stacked carefully on their longer edges, ensuring that the bottom layer is on a firm level surface. Timber battens should be placed between layer. All slates should be handled carefully on site.
Cutting and Holing: This can be done by mechanical disc cutter or hand operated cutter. Holing can be done at source or on site.
Good Roofing Practice: Slates should be fixed in accordance with B.S. code of practice for slates and tiles BS5584: Part1. B.S. code of practice for workmanship on site, BS8000: Part 6: 1990 should be referred to.
Underlay: Roofing felt should be used and we recommend Crest Interfol, Standard or micro-perforated. Interperm 140 is also available for warm roofs.
Battens: 50 x 25mm battens are recommended, treated, not less than 1200mm in length, and free of any sign of decay, insect attack, knots or knot holes.
>>>
View the product on crest-bst.co.uk
Crest Brick Slate & Tile Ltd.
ROOFS - THERMALLY BROKEN ALUMINIUM - IDS70
Through years of technology this system has been pioneered to provide unlimited versatility in design. The IDS70 roof system incorporates sections for the construction of valleys and multi-angle
hips, enabling the design to follow traditional styles, such as the Mediterranean lean-too, Victorian, Edwardian, pyramid or lantern shape to unique one off creative structures.
Suitable for all domestic and commercial applications that not only meet, but also exceeds building regulations. The system is designed with a comprehensive range of accessories such as integral box gutters, caps, vents, tie bars and an option of plain or decorative crestings, to enhance the overall elegance and functionality.
Special features
Multi-angled roof system, custom manufactured to suit your requirements
Energy efficient - compliant with Building Regulations
Heavy duty glazing bars for maximum projection
Structural ring beam - to incorporate folding sliding doors or sliding doors
Increased ventilation - manual, electric and thermostatic controlled
Severe weather and snow loading rated
Polycarbonate or double glazed toughened glass units plus full range of finishes
Low Maintenance and fully guaranteed
Versatility in design
The IDS70 roof system is manufactured from aluminium, which has been thermally broken by a two part polyurethane resin. Providing optimum strength, long life, with the ability to combat heat loss and prevent condensation.
Pitch
The standard roof system can cater from a pitch of 5o through to 35o, and a greater pitch can be obtained with a bespoke wall bracket. By incorporating heavy duty glazing bars a 3000mm maximum projection can be accommodated with double-glazed toughened glass units - even greater with polycarbonate. Larger projections can be achieved, contact our technical department for details.
Structural ring beam
A structural ring beam can create clear, unsupported span width openings of up to 5000mm, so you can accommodate folding sliding doors or sliding doors around the whole perimeter if required, with the weight of the roof above fully supported.
Ventilation
Hot air rises, so with the addition of a roof vent(s), which can either be manually operated or thermostatically controlled with a rain sensor, you can be in complete control of the climate inside. The winding gear can be disengaged to enable access for cleaning etc. Increased ventilation and airflow can be generated with the option of a breathable back wall plate, which doubles as a night vent.
Weather Seals
The IDS70 thermally broken roof system utilises both EPDM glazing gaskets and dual hardness gaskets for high performance, tested to CP3 Chapter V Part 2 for wind loadings (up to 100mph).
Operating System
The roof system has been tested to BS6399:Part three and is able to withstand the dead load of several inches of snow, or take the load of maintenance boards to carry out work above the roof.
Appearance
The standard finish is polyester powder coated White, other RAL colours (over 201 colours available), Silver or Bronze anodised or wood grain effect is available for a nominal charge.
Complete System
I-D-Systems roof systems have been specially designed to complement our folding sliding doors and sliding door systems
Glazing
The system can accommodate glazing of up to a sealed unit of 28mm. Our standard 24mm unit comprises of 4mm clear toughened glass with Pilkington Optitherm or Saint-Gobain Planitherm soft-coat to the inner pane x 16mm argon gas cavity x 4mm clear toughened glass providing an enhanced thermal efficiency with a centre pane u-Value of 1.1W/m2K to comply with building regulations for safety and thermal efficiency. All sealed units are BS kite marked, manufactured to BS6206A and BS5713 standards. Polycarbonate sheeting, clear or tinted of 16mm or a full 25mm with a centre pane u-Value of 1.5W/m2K can alternatively be requested.
>>>
View the product on i-d-systems.co.uk
I-D-Systems - Specialists in Folding & Sliding Door Systems
