Selection of 40 products among
167
MOTOMAN HP20-6 EXTENDED REACH ROBOT
Motoman’s HP20-6 robot provides an extended-reach solution to meet your automation needs
ARC WELDING • CUTTING • DISPENSING • HANDLING
Payload: 6 kg
Versatile, Extended-Reach Robot
The Motoman
HP20-6 is a sleek, high-speed robot that requires minimal installation space. It offers superior performance in welding, cutting, dispensing, and handling applications.
The streamlined HP20-6 robot can be placed close to the workpiece holding fixture to improve part accessibility. Advanced Sigma motors provide smooth, swift motion on demand.
The versatile HP20-6 can be floor-, wall-, or ceiling-mounted. It has a 6 kg (13.2 lb) payload, 3,459 mm (136.2") vertical reach, 1,915 mm (75.4") horizontal reach, and ±0.06 mm (±0.002") repeatability.
Motoman’s versatile, highly accurate MotoSim™ off-line programming and simulation package is available to assist in the design, verification and programming of workcells.
>>>
View the product on motoman.com
Motoman Robotics
GANTRYROBOT
The gantryRobot is a modular cartesian axis concept based on GÜDEL standard components. Rotary axes and wrist units are standard options of the gantry robots.
Handling capacity
25 - 2500 kg
(55 -
5510 lbs)
Number of axes
2 - 6 robot axes
up to 6 external axes
Integrated signal supply
10-poles 50V DC
2-poles 250V AC
2-CAN Buses
Integrated air supply
max. 10 bar (150 psi)
Learn more about GÜDEL's gantryRobot:
- Selection Table
- Control Systems
- Dimensions
- gantryRobot Applications
Advantages
Max. flexibility with up to 6 degree of freedoms (3 cartesian and 3 rotary).
Minimum floor space requirement due to overhead axis arrangement.
Simple programming and user guide with IRC5 robot controller or KUKA Motion Control ( KMC).
Concept
2-6 robot axes and up to 6 additional external axes
Payload range 25-2500 kg
8 standardized gantry sizes
Leg height, working ranges according to customer demands
Standardized leg design
Position of legs is variable
Holding brakes on all motors
Rack-/pinion drive on all linear axes
Robot controller S4Cplus or KMC
Examples of gantryRobot applications
Materials handling
Machine tending
Palletising
Transfer lines
Assembly
Processes, i.e. welding, glueing etc.
Options
Multiple independently driven carriages on same structure
Master-slave axes
Robot wrist unit (up to 3 rotary axes)
Central lubrication
Telescopic vertical axis
Mechanically linked carriages
Conveyor tracking
Customized solutions
>>>
View the product on gudel.com
Gudel
BRAND NEW INSPIRATIONAL TRIPLE DECK S-7 SCREENER
Extec have launched the ultimate large production screen; the totally brand new - S-7.
The S-7 is based around the revolutionary Doublescreen concept that has taken the screening world by storm.
Designed for the aggregate producer who requires large throughput, true mobility and clean gradings, the new S-7 Possesses such features as:
Screening area consists of two individual 10x5 screen boxes incorporating 3 decks in each screen box, allowing for a more concentrated screen.
Each Screen box possesses its own separate drive, and each being independently angled to aid the screening process.
The screen box arrangement presents a massive screening area, yet allows for an incredibly clean product through the independent set up of the two screen boxes.
An extra side conveyor that enables the S-7 it to produce up to a massive total of 5 product materials.
Longer, chevron belted side conveyors, in order to feed directly into a cone crusher, and/or possess vast stockpiling capacities.
Longest tail conveyor in its class for even greater stock piling capacity.
Faster running belts in order to facilitate high rates of production.
Patented screen box lift mechanism to ease mesh change.
New stronger chassis design for the most demanding of environments.
Longer tracks in order to produce a stable screening platform.
These mould breaking attributes are combined with existing features found on the S-4, S-5 & S-6 Doublescreen:
Large hopper, with variable speed belt feeder, heavy-duty roller bed and heavy-duty belting.
Heavy duty tipping grid activated by remote control.
Unique Extec design Spreader plate to spread material across the full width of the screening facility whilst maintaining the velocity of the material particles.
Optional world famous Extec Vibrating grid for breaking down of material prior to screening.
Although possessing many customer focused features, at the heart of the S-7 is the Triple Deck Doublescreen Box. This enables the screener to incorporate such mould breaking features as:
Independent screen-box slope
Independent screen-box vibration
Independent screen-box amplitude
Independent screen-box speed.
All resulting in fantastic output of accurate, quality products!
The Doublescreen box allows for over twenty different screening angles. Screening efficiency is maximised as material flow is directed by the angle of the screen box resulting in:
1. A steep angle for the primary screen-box ensures that the majority of the material is processed in the initial impact area.
2. The majority of the undersize is removed during initial impact.
3. Only near-size material passes to the secondary screen-box. This may be set flat enough to ensure any remaining material is screened efficiently.
4. Clean gradings, at very high out put, are produced as material is exposed to large screening area.
The primary box consists of three 10 x 5 (3048mm x 1524mm) decks, with the secondary box consisting of three decks, with the top and middle being 10 x 5, and with the bottom being a 8 x 5 (2400mm x 1524mm). This provides the customer with a 20 x 5 (6096mm x 1524mm) top deck, 20 x 5 middle deck and an 18 x 5 (4800mm x 1524mm) bottom deck.
With all the above features the S-7 promises to be the most definitive mobile screening system for the truly serious contractor or quarry operation. The S-7 represents the greatest innovation in mobile screening systems as it finally resolves the conflicting principles previously associated with providing an immense screening area on truly mobile plant, making the Extec S-7 the most productive mobile screen in its class.
Massive throughput, true mobility, and a class leading screening area, results in the ultimate profit generator available today.
>>>
View the product on extecscreens.com
EXTEC
ROBOT BLASTING SYSTEM
Guyson Corporation has integrated a 6-axis robot nozzle manipulator into an automated rotary blast machine for repetitive surface treatment operations. The robotic blast system was developed to
consistently perform critical surface preparation on irregularly shaped components, but it is also suitable for a variety of other blasting applications.
The articulated robot arm is rigidly mounted at the rear of the blast cabinet on a welded base attached to the frame of the finishing enclosure. Fitted tightly around the effector end of the robot that extends into the blast chamber through an opening in the back wall of the cabinet is a custom-tailored laminated nylon skirt to seal the rear of the blast machine and isolate the precision manipulator from the abrasive blasting environment. Workers are excluded from the area around the quiet-moving robot by a welded wire cage.
In addition to the motion capabilities of the robot, the rotary table of the blast machine is driven by a servomotor that is integrated with the robot controller as a seventh axis of motion. The radial orientation of a component fixtured on the table can be programmed with extreme accuracy and synchronized with complex motions of the blast nozzle, allowing precise control of the distance and speed of the nozzle(s) in relation to the surface of the component.
Provided with the robot blasting package is a user-friendly teach pendant that simplifies development of motion programs for different components. Once a program is saved and identified with a unique code or part number, the automated processing routine can be recalled and run using the blast machine's touch-screen interface alone. Guyson optionally offers advanced component recognition features such as bar code scanning to automate program selection or verify the pre-programmed process matches the part that has been loaded.
In addition to robotic nozzle manipulation, Guyson also integrates machine tending robots for automated loading and unloading of various types of production blast cleaning and surface preparation machines.
>>>
View the product on guyson.com
Guyson
