Robotic Accessories Division

United Kingdom

See product on robotic-accessories.com

RAD's UltiBurr™ 630 Compliant Deburring Tool saves you money by increasing machine uptime, reducing scrap, and shortening robot* programming time: The compliant spindle enables the cutting bit to follow the part profile and compensate for surface irregularities without gouging the part, leaving unwanted burrs on the edge, or breaking the tip. The compliance feature of the UltiBurr™ Deburring Tool will accommodate for deviations between the robot path and tool edge so the programmers have to program fewer path points. This savings is multiplied in operations where

re several passes are necessary in order to achieve the desired result. The UltiBurr™ 630 Compliant Deburring Tool: Provides compliance in x, y, & z axes to accommodate for part and path variation Runs quietly and smoothly at a low 67dba Allows pneumatic adjustment so the robot program can vary the pressure against the work piece (compliance force) as desired Permits high feed rates while maintaining consistent material removal Produces minimal chatter and vibration Uses clean air (no oil) to power its turbine motor so the air can be vented directly into the environment Has 0.25" collet to accept standard, off-the-shelf industrial burrs Operating Principle The UltiBurr™ 630 Compliant Deburring Tool utilizes a suspended spindle so that its tip is freely compliant in all directions. The spindle is re-centered by the compliance air. Increasing the compliance air pressure directly increases the compliance (resistive) force applied to the air motor and the component being deburred. Note In order to assure optimal spindle life, the compressed air used to power the UltiBurr™ Deburring Tool must be clean and dry. Air filtered through at least a 5+ micron filter and a coalescing filter (to ensure oil extraction near the motor) is recommended (standard filters will not take out all contaminants such as oil, mist, water, or fine particles).
Save this product