Résistors (translation in progress): suppliers, wholesalers and manufacturers on Hellopro
Search   


Résistors (translation in progress) :

53 products
Select the category
    Selection of 42 products among 53
    TK/TN SERIES RESISTOR

    TK/TN SERIES RESISTOR
    20 and 15 Watt TO-220 Package Thick and Thin Film Ohmite is proud to introduce the newest addition to our family of Heat Sinkable Power Resistors. The TK/TN Series offers 3 major advances over existing TO-220 products: Low Resistance Values down to 0.03 ohms for current sense applications Low Cost Thin Film Construction is the first Thin Film power resistor in heatsinkable packaging on the market. Why Thin Film? Thin film technology offers the following performance advantages: Extremely stable (low TCR) Low Noise (parasitic capacitance and resistance) Excellent High Frequency Performance High Accuracy (tight tolerances) >>>
    View the product on ohmite.com Ohmite
    SUPER MOX SERIES RESISTOR

    SUPER MOX SERIES RESISTOR
    The TGHG Series uses state of the art technology to provide highly reliable, non inductive performance. This resistor is ideal for many current monitoring and controls applications. FEATURES Resistance values beginning at 0.5mO Non Inductive Four terminal Kelvin connection SOT 227 Package Four terminals to isolate measurement path from current flow path Accuracy in a high power package >>>
    View the product on ohmite.com Ohmite
    SUPER MOX SERIES RESISTOR

    SUPER MOX SERIES RESISTOR
    High Voltage Resistors Uncoated resistor element pictured for demonstration purposes only. Finished product is coated with silicone. High-voltage Super Mox resistors have been developed to meet the precision temperature stability requirements of high-accuracy and high-voltage systems. Super Mox combines proprietary non-inductive resistance system and design to achieve low temperature coefficient, low voltage coefficients, high stability and increased high operating voltages. These resistors are designed to meet the demanding requirements of high voltage power supplies, electron microscopes, X-ray systems, high resolution CRT displays and geophysical instruments. >>>
    View the product on ohmite.com Ohmite
    AUDIO GOLD RESISTOR

    AUDIO GOLD RESISTOR
    Audio Gold Resistors from Ohmite Designed for high-end loudspeaker and amplifier applications RoHS compliant product available Jan. 2006 Add "E" suffix to part number to specify. Ohmite now offers the Audio Gold Resistor Family, specifically designed for high-end loudspeaker and amplifier applications. These resistors utilize high quality resistance wire wound on a ceramic core, terminated, and finished with our flameproof Centohm® coating. Ohmite's Audio Gold resistors have been carefully engineered with non-magnetic materials to eliminate the effects of these stray magnetic fields on circuit performance, thereby resulting in simplified shielding requirements and improved sound quality. Audio Gold resistors are designed for use in cross-over networks and as source, emitter, or cathode resistors in balancing applications for output transducers. >>>
    View the product on ohmite.com Ohmite
    TAP800 SERIES RESISTOR

    TAP800 SERIES RESISTOR
    800 Watt Heat Sinkable Planar Resistor Ohmite's TAP800 Series dissipates 800 watts of power when used with a liquid or air cooled heat sink system. The TAP800 rounds out 600 watt (TAP600) and 1000 watt (TAP1000) product offerings. Applications include variable speed drives, power supplies, robotics, motor control, control devices, and other power designs. FEATURES Electric support is high alumina content ceramic metallized on the bottom for ideal heat transfer and optimum discharge. Encapsulated with a special resin filled epoxy casing with a large creepage distance to mass, large air distance between terminals, and a high insulation resistance (CTI 600). Resistive element is specially designed for low inductance and capacitance. The element provides stable performance in addition to high wattage and pulse loading capability. Contacts allow for easy load connecting with M4 or M5 screws. Materials meet the requirements of UL94-V0 >>>
    View the product on ohmite.com Ohmite
    AC LOAD BANK - HAC415-100

    AC LOAD BANK - HAC415-100
    Hillstone AC load bank, Type ref: HAC415-100 - Simple operation - Safety isolation contactors - Fan fail protection - High power up to 100KW - Portable - Fuse protection The Hillstone HAC415-100 load bank is designed for AC generator and UPS load testing All units incorporate forced cooled high power resistor elements and safety features including fan fail, emergency stop push button Specification Type ref: HAC415-100 Nominal AC voltage ranges 415V Frequency 50hz Max power rating 107KW Adjustment 1kW to maximum load via panel mounted switches Panel mounted controls Emergency stop, Fan start control and load channel selection switches. Cable termination chamber Stud connection for, 4 wire + earth, star connection via stud connections behind a remove-able gland plate. Cooling Fan 415V 50hz operation derived from the test source, rated at 3.5kW Case size 1000mm long x 700mm wide x 930mm high plus castors. Weight 95kgs approx Finish Light grey 00A05 to a high quality textured paint finish Resistor types 10mm diameter finned sheath elements with a tolerance of ±5% Environmental protection rating Electrical controls IP54 Element chamber IP21 Designed for outdoor operation Operating temperature range 0 – 40 deg C Storage temperature range 0 – 80 deg C Movement Swivel castors and lifting eye points Optional extras Single phase operation Operation for 60Hz testing Panel mounted digital display, for Volts, Current, Watts and frequency Hand held controller, with 10m or 20m control cable PC interface and data logging software >>>
    View the product on hillstone.co.uk Hillstone Products
    ANGLE SENSOR, CONTACTLESS RSC2800

    ANGLE SENSOR, CONTACTLESS RSC2800
    Description The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. Therefore, a magnet is attached to the sensor shaft, the magnetic field orientation is captured with an integrated circuit. An analogue output signal represents the calculated angle. The housing is made of a special highgrade temperature-resistant plastic material. Fixings are in the form of elongated slots which allow simplicity in mounting together with ease of mechanical adjustment. The special backlash-free push-on coupling ensures extremely quick and simple installation. The transducer is not sensitive to either dirt or dampness. Electrical connections are made via a shielded cable with 3 lead wires which is sealed into the housing. -------------------------------------------------------------------------------- Special features - non-contacting, magnetic - electrical range 30° up to 180° in 10°-steps - available with push-on coupling or marked shaft - simple mounting - protection class IP54 or IP65 - long life - 5 V-variant fullfills e1-standard - internal resolution 13 Bit - independent linearity ± 0,5% >>>
    View the product on novotechnik.de NOVOTECHNIK
    12-CHANNEL TRANSISTOR UNIVERSAL DIMMER

    12-CHANNEL TRANSISTOR UNIVERSAL DIMMER
    Polaron’s Universal 3 phase chokeless dimmer racks offer uncompromised adaptability for all load types. Universal dimmer racks auto detect the load type for each channel and dynamically provides either leading or trailing edge control An RS232 interface is built in to the racks as standard for easy system configuration and third party control. The racks also incorporate a fail-safe alarm input, which sends all lights to full when operated. An in-built timer allows for up to 200 system-wide timed events to be set per rack. FEATURES Rated at 20Amps per channel in leading or trailing edge operation Soft start to protect loads during switch-on 1-10v HFR fluorescent dimmable ballast control with mains relay per channel Separate switched output per channel Permanent supply for emergency luminaires per channel Easily accessible bypass switch per channel On board diagnostics with LED indication On board real time clock with event timer On board alarm input On board DMX input On board RS232 input On board Analogue control input DALI & DSI options available CE Approved >>>
    View the product on polaron.co.uk Engel & Gibbs Ltd
    2010 SMD RESISTOR

    2010 SMD RESISTOR
    0.6 Watt Wirewound Surface Mount Power FEATURES 1% Tolerance standard Smallest wirewound on the market Available in low ohmic values SPECIFICATIONS 25°C ambient Power: 0.6 watts Voltage (max.): 50V Tolerance: 1% Resistance range: 0.005O-1K Temperature Coefficient: 0.1O-1O: ±901O-10O: ±5010O+: ±20 Dielectric Withstanding Voltage: 1000V Tape Size: 12mm, 13" reel, 2500 pcs. per reel. >>>
    View the product on ohmite.com Ohmite
    DIGITAL POTENTIOMETER BGE 16

    DIGITAL POTENTIOMETER BGE 16
    Description: The new high resolution digital potentiometer with electronic impulse generation is a rotary encoder for setting of digital datas. At the output of the electronic encoders 2x512, 2x256, or 2x128 rectangular impulses per output and rotation are at the user’s disposal. The digital potentiometer can also delivererd with a index signal per turn. The 90° dephased outputs enable the control system to recognize the direction. The EBE encoders with its high protective system is also applicable under critical conditions. Dimensions Digital Potentiometer; Mounting with 3/8 NPT or M 10 x 0.5 >>>
    View the product on ebe-gmbh.de EBE Groupe - EBE Group
    AC LOAD BANK - HAC415-200

    AC LOAD BANK - HAC415-200
    Hillstone AC load bank, Type ref: HAC415-200 - Simple operation - Safety isolation contactors - Fan fail protection - High power up to 200KW - Portable - Fuse protection - Option for PC data logging The Hillstone HAC415-200 load bank is designed for AC generator and UPS load testing All units incorporate forced cooled high power resistor elements and safety features including fan fail, emergency stop push button Specification Type ref: HAC415-200 Nominal AC voltage ranges 415V Frequency 50hz Max power rating 209KW Adjustment 1kW to maximum load via panel mounted switches Panel mounted controls Emergency stop, Fan start control and load channel selection switches. Cable termination chamber Stud connection for, 4 wire + earth, star connection via removeable gland plate. Cooling Fan 415V 50hz operation derived from the test source, rated at 3.5kW Case size 1200mm long x 800mm wide x 900mm high plus castors. Weight 150kgs approx Finish Light grey 00A05 to a high quality textured paint finish Resistor types 10mm diameter finned sheath elements with a tolerance of ±5% Environmental protection rating Electrical controls IP54 Element chamber IP21 Designed for outdoor operation Operating temperature range 0 – 40 deg C Storage temperature range 0 – 80 deg C Movement Swivel castors with fork lifting points Optional extras Single phase operation Operation for 60Hz testing Panel mounted digital display, for Volts, Current, Watts and frequency Hand held controller, with 10m or 20m control cable PC interface and data logging software >>>
    View the product on hillstone.co.uk Hillstone Products
    GEARED POTENTIOMETER GP

    GEARED POTENTIOMETER GP
    Description Geared potentiometers of this series supply an analogue output signal proportional to the number of turns. The potentiometer section is made up of standard elements from series P 6500 as shown in this catalogue. The gear mechanism comprises precision gear wheels, and the shaft is mounted in double ball bearings. The gear mechanism and the potentiometer are mounted and pinned in the factory for minimum backlash. The shaft side of the gear mechanism case is provided with three M4 threaded holes offest by 120° for mechanical fixture of the transducer. -------------------------------------------------------------------------------- Special features - reduction gearing 3:1, 5:1, 10:1 - very good linearity 0.1 % (standard) - very long life typically 100 x 106 movements -------------------------------------------------------------------------------- Recommended accessories - Fork coupling Z104G6 (backlash-free) - Fork coupling Z105G6 (backlash-free) - Process-controlled indicators MAP... with display - Signal conditioner MUP.../MUK... for standardized output signals -------------------------------------------------------------------------------- Important All the values given in this data sheet for linearity, lifetime and temperature coefficient in the voltage dividing mode are quoted for the device operating with the wiper voltage driving on operational amplifier working as a voltage follower, where virutally no load is applied to the wiper (le >>>
    View the product on novotechnik.de NOVOTECHNIK
    4-CHANNEL TRANSISTOR UNIVERSAL DIMMER

    4-CHANNEL TRANSISTOR UNIVERSAL DIMMER
    Polaron’s Universal single phase chokeless dimmer racks offer uncompromised adaptability for all load types. Universal dimmer racks auto detect the load type for each channel and dynamically provide either leading or trailing edge control An RS232 interface is built into the racks as standard for easy system configuration and third party control. The racks also incorporate a fail-safe alarm input, which sends all lights to full when operated. An in-built timer allows for up to 200 system-wide timed events to be set per rack. FEATURES Rated at 20Amps per channel in leading or trailing edge operation Soft start to protect loads during switch-on 1-10v HFR fluorescent dimmable ballast control with mains relay per channel Separate switched output per channel Permanent supply for emergency luminaires per channel Easily accessible bypass switch per channel On board diagnostics with LED indication On board real time clock with event timer On board alarm input On board DMX input On board RS232 input On board Analogue control input DALI & DSI options available CE Approved >>>
    View the product on polaron.co.uk Engel & Gibbs Ltd
    DIGITAL POTENTIOMETER BGE 16

    DIGITAL POTENTIOMETER BGE 16
    Description: The new high resolution digital potentiometer with electronic impulse generation is a rotary encoder for setting of digital datas. At the output of the electronic encoders 2x512, 2x256, or 2x128 rectangular impulses per output and rotation are at the user’s disposal. The digital potentiometer can also delivererd with a index signal per turn. The 90° dephased outputs enable the control system to recognize the direction. The EBE encoders with its high protective system is also applicable under critical conditions. Dimensions Digital Potentiometer; Mounting with 3/8 NPT or M 10 x 0.5 >>>
    View the product on ebe-gmbh.de EBE Groupe - EBE Group
    AC LOAD BANK - HAC415-300

    AC LOAD BANK - HAC415-300
    Hillstone AC load bank, Type ref: HAC415-300 - Simple operation - Safety isolation contactors - Fan fail protection - High power up to 300KW - Fuse protection - Emergency Stop The Hillstone HAC415-300 load bank is designed for AC generator and UPS load testing All units incorporate force cooled high power resistor elements. Safety features including load bank shut down upon fan failiure. The load bank remote control offer fan start, switched on / off contactor load selection. On board load bank controls include emergency stop push button, control circuit on & off. Cable terminations via gland plates. Specification Type ref: HAC415-300 Nominal AC voltage ranges 415V Frequency 50hz/60hz Max power rating 300KW Load steps from 1kW to maximum load Panel mounted controls Emergency stop & start button and load channel via iHHC remote controller Cable termination chamber Stud connection for 3 phase, 4 wire + earth, star connection Cooling Fans 415V 50hz operation derived from the test source Case size 1750mm long x 1350mm high x 1300mm wide Weight 300kgs approx Finish RAL 7032 to a high quality paint finish Resistor types 10mm stainless incoloy sheath elements Resistor tolerance ±5% Environmental protection rating Electrical Controls IP54 Element chamber IP21 Designed for outdoor operation and to be mounted for horizontal airflow Integral designed sun shield Operating temperature range 0 – 40 deg C Storage temperature range 0 – 80 deg C Movement Forklift pockets Optional extras Trailer Mounting Panel mounted digital display, for Volts, Current and Watts >>>
    View the product on hillstone.co.uk Hillstone Products
    GEARED POTENTIOMETER IGP

    GEARED POTENTIOMETER IGP
    Description Using this potentiometer a maximum angular rotation of 3800° can be converted into a voltage proportional to the angle of rotation, through the medium of a conductive-plastic potentiometer. This special "heavy-duty" version is designed to measure angular or linear displacement under the most difficult of enviromentat conditions. Simply yet robustly built, these units are suitable for use in all manner of industrial applications and engineering industry. The cast housing is watertight. The single stage gearing is exceptionally backlash-free. Heavy-duty bearings allow for high axial loading on the shaft; gearwheels or even chain drives may be used directly drive the shaft. Sealing is achieved through the use of a stepped bush whilst electrical connections are made via plug and socket mounted on the side of the unit. -------------------------------------------------------------------------------- Special features - reduction gearing 3:1, 5:1, 10:1 - good linearity 0.1 % (standard) - long life typically 100 x 106 movements - mechanical rotation - robust construction with 10 mm shaft - Protection class IP 65 -------------------------------------------------------------------------------- Included in delivery - 4 mounting clamps Z4 - 1 - 1 right angle plug Cannon Nr. CA 08 COM-E16S-1S-B - 1 anti-kink sleeve -------------------------------------------------------------------------------- Recommended accessories - Spring operated backlash-free coupling Z110G10 - Process-controlled indicators MAP... with display - Signal conditioner MUP.../MUK... for standardized output signals -------------------------------------------------------------------------------- Important All the values given in this data sheet for linearity, lifetime and temperature coefficient in the voltage dividing mode are quoted for the device operating with the wiper voltage driving on operational amplifier working as a voltage follower, where virutally no load is applied to the wiper (le >>>
    View the product on novotechnik.de NOVOTECHNIK
    ANALOGUE UNIT DIMMERS

    ANALOGUE UNIT DIMMERS
    The Lightlink range of MDA analogue dimmer units is ideally suited for the smaller installation where 1 or 2 channels of lighting control is required, such as reception areas or cinema auditoriums for house lighting. Uniquely, each unit has a bypass switch and a capacity of 10/20 Amps per channel. FEATURES Controls Incandescent High Voltage, Halogen Low Voltage (inductive wire wound or electronic transformer driven), Fluorescent (Conventional or High Frequency Ballasts) and Cold Cathode Stabilisation circuitry to provide constant light output under supply voltage fluctuations 10/20 Amp per channel capacity 120V/240V, 50/60Hz operation MCB’s for load protection Square law dimming characteristic Rotary Potentiometer Control, 4 Scene Control May be controlled via a 0 - 5V/10V DC input control voltage Scene or raise/lower functions may be controlled via volt-free momentary contacts Master-slave capability allows an infinite number of dimmers to be controlled simultaneously Can be controlled from single or multiple locations Minimum and maximum lighting levels adjustable Adjustable fade rates Bypass switch for temporary lighting and dimmer protection during installation Cooling achieved using natural convection CE Approved >>>
    View the product on polaron.co.uk Engel & Gibbs Ltd
    INDUSTRIAL LINEAR POTENTIOMETER - LONG STROKE

    INDUSTRIAL LINEAR POTENTIOMETER - LONG STROKE
    Available as: 3 wire potentiometric or 2 wire 4-20mA current loop and 3 wire 0-10v, both with adjustable Span and Zero.Measuring ranges: from 1500mm to 5000mm (to 10000mm in higher case).Size (mm): 222 long (inc. feet), 122 wide, 56 high, (106 high case).Sealed to IP55.Shown with 2 wire 4-20mA, nylon coated stainless steel cord with latched hook connector and standard PVC electrical cable. Shown with clear display lid. >>>
    View the product on jkcontrols.co.uk JK Controls Ltd.
    AC LOAD BANK - HAC415-400 UK

    AC LOAD BANK - HAC415-400 UK
    Hillstone AC load bank, Type ref: HAC415-400 UK - Simple operation via panel mounted switches or via iHHC remote hand held controller - Safety isolation contactors and fan failure load disconnect - Emergency stop load disconnection. - High power rating up to 400KW - Optional Digital Instrumentation Volts, Current, Frequency, KWatts - Optional trailer mounting The Hillstone HAC415-400 UK load bank is designed for AC generator or UPS load testing and controlled from a common controller – the iHHC. Cable terminations are provided from a single connection chamber. All units incorporate force cooled high power resistor elements. Specification Type ref: HAC415-400 UK Nominal AC voltage ranges 415V Frequency 50 Hz Max power rating 400KW Minimum Load adjustment 4 kW based on fan load with 1kW incremental steps thereafter Panel mounted controls Energise control on/off rocker switch Emergency stop, Individual switched load steps or Remote hand held controller interface socket Cable termination chamber Bus bar connection for 3 phase, 4 wire + earth contained in a IP54 connection chamber and accessed via a re-moveable and un-drilled gland plate. Cooling Fan 1 x 4kW 415V 50hz from the test source Case size 1760mm deep x 2160mm wide x 1110mm high Weight 700kgs approx Finish RAL7032 to a high quality paint finish Resistor types 10mm stainless elements, tolerance ±5% Environmental protection rating Electrical Controls IP54 Element chamber IP21 Designed for outdoor operation and to be mounted for horizontal airflow Integral designed sun shield Operating temperature range 0 – 50 deg C Storage temperature range 0 – 80 deg C Movement Metal base with fork pockets Options Alternative 3 phase voltage ranges include 380V, 400V, 480V, 660V, 690V 60Hz fan frequency Digital meter display UK road trailer >>>
    View the product on hillstone.co.uk Hillstone Products
    INDUSTRIAL-GRADE POTENTIOMETER AW 360 ZE

    INDUSTRIAL-GRADE POTENTIOMETER AW 360 ZE
    Description This potentiometer has been designed for use as an absolute 360° angle encoder. Apart from direct analogue use, it can be used in conjunction with external A/D converter. In this case, the unit operates as an angle transducer with 12 bit resolution and offering 10 or 11 bit absolute accuracy. The transducer only requires 6 connections, and these are made via a 6 pole, waterproof plug and socket. Contrary to the limitations encountered with other potentiometers, which have a dead band of some degrees which cannot be used, due to its two wipers and its hybrid circuit the AW 360 ZE can be used over all 360° of rotation. The reset voltages at the beginning and end of the sawtooth are well defined, and there is no function angle tolerance as is normally associated with potentiometers. These features together with the fact that the maximum output voltage is determined by the applied voltage means that units may be interchanged or replaced without the need to electrical adjust or trim. When turning the axle in cw (view on shaft end) the signal increases. Other output signals on request. The transducer delivers a logical signal quite separately from the analogue output which can be used to inhibit the A/D conversion during the reset period, in order to avoid measuring errors. The housing is in compliance with protection class IP 65 with the conformable plug and is particularly suited to stringent requirements in the machine, plant and vehicle design sector. -------------------------------------------------------------------------------- Special features - gap-free output over all 360° - very high absolute linearity - interchangeable without electrical adjustment - guaranteed 12 bit resolution and repeatability - long life - 50 x 106 - Protection class IP 65 -------------------------------------------------------------------------------- Included in delivery - 3 mounting clamps Z3-31 -------------------------------------------------------------------------------- Recommended accessories - Mating plug EEM 33-78 protection class IP 67 - Right-angled plug EEM 33-80 protection class IP 40 - Fork coupling Z104G6 (backlash-free) - Fork coupling Z105G6 (backlash-free) - Process-controlled indicators MAP... with display - Signal conditioner MUP.../MUK... for standardized output signals -------------------------------------------------------------------------------- Important All the values given in this data sheet for linearity, lifetime and temperature coefficient in the voltage dividing mode are quoted for the device operating with the wiper voltage driving on operational amplifier working as a voltage follower, where virutally no load is applied to the wiper (le >>>
    View the product on novotechnik.de NOVOTECHNIK
    COMPACT DIMMER RANGE

    COMPACT DIMMER RANGE
    The Lightlink compact dimmer pack has been developed to provide a range of budget power handling packs whilst incorporating the flexibility and performance of the Lightlink scene-setting software. A seamless bi-directional link to most third party systems via an open protocol is available as an option. The packs are available in seven configurations and accept a single-phase supply with power handled by substantial SCR's with high speed fuse protection. Power distribution is incorporated to provide input power isolation and output circuit MCB protection. Click here to view our latest edition FEATURES Controls Tungsten, Low Voltage, Cold Cathode and fluorescent (2 wire, 1-10V DC or DSI) loads Each channel rated at 5A (4 and 8 channel, 1-10V DC) or 10A (4 channel). DSI rated at 50 ballasts per channel. 100 Scene non-volatile memory Individual output MCB protection LightLink RS485 network connection, RS232*, DMX512*, Analog control*, Intelligent/smart interface* Electronic protection against microprocessor failure “Bypass to full” mode Wide choice of standard and special control panels including LCD Touch Screens, Time Clocks, PE Cells, PIR and Infra-Red remote controls Fully programmable via infra-red transmitter or 'on plate programming facility' Fully configurable functionality via Lightlink Software CE Approved >>>
    View the product on polaron.co.uk Engel & Gibbs Ltd
    AC LOAD BANK - HAC415-500

    AC LOAD BANK - HAC415-500
    Hillstone AC load bank, Type ref: HAC415-500 UK Simple operation via panel mounted switches or via iHHC remote hand held controller Safety isolation contactors and fan failure load disconnect Emergency stop load disconnection. High power rating up to 500KW Optional Digital Instrumentation Volts, Current, Frequency, KWatts Optional trailer mounting The Hillstone HAC415-500 UK load bank is designed for AC generator or UPS load testing and interfaced from hand held controller – the iHHC. The load bank is supplied as a single unit which incorporates 2 load modules. Cable connection ( based on 2 x120mm cables per phase ) use panel mounted Powerlock connectors on each module. Specification Type ref: HAC415-500 UK Nominal AC voltage ranges 415V ( for alternative voltages see extras below ) Frequency 50 Hz ( for alternative frequency see extras below ) Max power rating 500KW, 684A per phase Minimum Load adjustment 4 kW based on fan load with 1kW incremental steps thereafter Panel mounted controls Energise control on/off rocker switch Emergency stop, Individual switched load steps or Remote hand held controller interface socket Cable connection 2 sets of panel mounted power lock connectors rated for 120mm cable per phase. Cooling Fan 2 x 2kW 415V 50hz from the test source Case size 1400mm deep x 1600mm wide x 1200mm high Weight 450kgs approx Finish RAL7032 to a high quality paint finish Resistor types 10mm stainless elements, tolerance ±5% Environmental protection rating Electrical Controls IP54 Element chamber IP21 Designed for outdoor operation and to be mounted for horizontal airflow Operating temperature range 0 – 50 deg C Storage temperature range 0 – 80 deg C Movement Supplied on swivel castors and fitted with lifting eyes Options Alternative 3 phase voltage ranges include 380V, 400V, 460V, 480V, 660V, 690V 60Hz fan frequency Digital meter display UK road trailer Metal base with fork pockets >>>
    View the product on hillstone.co.uk Hillstone Products
    INDUSTRIAL-GRADE POTENTIOMETER IPS 6000

    INDUSTRIAL-GRADE POTENTIOMETER IPS 6000
    Description Using this potentiometer a maximum angular rotation of 355° can be converted into a voltage prorortional to the angle of rotation, through the medium of a conductive plastic potentiometer. This special "heavy-duty" version of our industrial potentiometers can be used successfully in the most demanding applications or environmental condutions. Simply yet robustly built, these units are suitable for use in all manner of industrial applications and machinery manufacturing. The cast housing is watertight; sealing is achieved through the use of a stepped bush whilst electrical connections are made via a plug and socket mounted on the side of the unit. Special versions with different electrical travels and shaft dimensions are available. -------------------------------------------------------------------------------- Special features - excellent linearity standard ± 0.1 % - long life 100 x 106 movements typ. - mechanical continuous rotation - extremely robust industrialgrade construction - Protection class IP 65 -------------------------------------------------------------------------------- Included in delivery - 4 mounting clamps Z4 - 1 - 1 corner connector Cannon No. CA 08 COM-E-16S-1S-B - 1 anti-kink sleeve -------------------------------------------------------------------------------- Recommended accessories - Spring loaded coupling, Z110g (backlash-free) - Process-controlled indicators MAP... with display - Signal conditioner MUP.../MUK... for standardized output signals -------------------------------------------------------------------------------- Important All the values given in this data sheet for linearity, lifetime and temperature coefficient in the voltage dividing mode are quoted for the device operating with the wiper voltage driving on operational amplifier working as a voltage follower, where virutally no load is applied to the wiper (le >>>
    View the product on novotechnik.de NOVOTECHNIK
    COMPACT TRAILING EDGE DIMMER MODULO4

    COMPACT TRAILING EDGE DIMMER MODULO4
    Polaron’s new IGBT dimmer pack provides the optimum dimming output for electronic LV transformers. Each rack can control up to 4 x 5Amp lighting circuits and in addition, features 1-10Vdc dimming on each channel. Also included is a multiple event timer, direct alarm inputs and the ability to seamlessly integrate with AV systems. An RS232 port is provided for easy system configuration and third party control. The pack also incorporates a fail-safe alarm input, which sends all lights to full when selected. The on-board multiple event timer allows up to 200 system-wide events to be stored. The pack comes complete with a ten button remote control plate with two choices of fascia finish and an infra-red sceneset/select transmitter. Not suitable for wirewound transformers FEATURES Dimmers use IGBT power devices to handle Incandescent, Electronic Low Voltage, Electronic Fluorescent, 1-10Vdc (Analogue) Fluorescent, Electronic Cold Cathode Each channel rated at 5Amps 250 Scene 10 year memory held in processor Individual fuse protection for each channel LightLink RS485 network connection, RS232, direct DMX input, Analogue control, volt-free contacts Electronic protection against microprocessor failure Internally protected against short circuit, incorrect load connection and over current. Bypass to full switch Choice of two standard control plate finishes Dimming levels set using the infra-red transmitter or ‘on plate’ facility CE Approved >>>
    View the product on polaron.co.uk Engel & Gibbs Ltd
    DC / AC LOAD BANKS - HBN 24 & 30

    DC / AC LOAD BANKS - HBN 24 & 30
    HBN 24 & 30 – Series NATURALLY COOLED, DC / AC LOAD BANKS Features - LIGHT WEIGHT - LOW COST - HIGH POWER - NO AUX MAINS REQUIRED - PORTABLE - TEST CABLES INCLUDED The Hillstone HBN series load banks provide a low cost solution to on-site testing. Units can provide manually controlled, constant current, battery discharge tests, plus rectifier and low voltage transformer testing. All units are fully adjustable from approx 1A to max rating via panel mounted circuit breakers. NOTES 1. Units are rated for continuous operation at max volts 2. Shrouded test sockets are included for measurement of amps and volts by your external digital multi-meters. 3. Elapse discharge time indicator available as optional extra. 4. Each load channel protected by circuit breakers. 5. All load banks can be operated down to zero volts with proportionally reduced output current. 6. Equipment is designed for indoor use only. 7. A 2.5 metre long DC cable set and operating manual is supplied with each equipment. 8. Changes to specification, components, dimensions or weights may vary without prior notice. >>>
    View the product on hillstone.co.uk Hillstone Products
    POSITION TRANSDUCER, NON-CONTACTING TIM

    POSITION TRANSDUCER, NON-CONTACTING TIM
    Description This absolute position transducer can be integrated directly in the pressurized zone of pneumatic and hydraulic cylinders, thereby providing compact and cost-effective position sensing. The transducer consists of the stainless steel flange welded on the stainless steel pressure- proof rod and the moving position marker. Signal processing electronic is completely build-in the flange. The transducer rod fits into the bored piston rod. The position marker is mounted on the piston bottom. Using the plug-in flange version the complete transducer is mounted inside the cylinder and protected against external influences. This feature with highest durability is favoured especially for mobile applications in harsh environments. Mounting is also possible in clevis-head cylinders or any space limited cylinder applications. The touchless magnetostrictive measuring process offers a superior accuracy and high dynamics. The measuring process is independent from a medium like hydraulic liquids. The high mechanical ruggedness of the transducer combined with the underlying measuring technique means that the system is highly resistant to shock and vibration. The measurement is accomplished using a passive ring-shaped position marker which can be moved as a free-floating element. The touchless coupling makes installation even simpler, and the wear-free operation means unlimited mechanical life expectancy and unlimited traverse speed of the position marker and permits stroke lengths up to 2500 mm. The transducer’s integrated signal processing transforms the position information directly into market standard voltage or current outputs. Since the outputs are direct, no signal-conditioning electronics are needed when interfacing with controllers or meters. The transducer complies with the usual EMC requirements of agricultural- and forest machines and vehicles. In addition to the standard configuration, the modular design provides customer specific terminal flanges and mounting variations. -------------------------------------------------------------------------------- Special features • rod style transducer • for integration in pneumatic and hydraulic cylinders • touchless magnetostrictive measuring process • non-contact guiding with ring-shaped position marker • unlimited mechanical life • no velocity limit for position marker • absolute output voltage or current • outstanding accuracy per-formance up to 0,04 % • repeatability 0,005 % regardless of stroke length • operating pressure up to 350 bar, peaks up to 530 bar • wide range of supply voltage • EMC for mobile applications • immunity against HF fields up to 200 V/m • screw flange M18x1,5 or plug-in flange Ø 48 mm • other flanges on request • optionally plug, cable or lead wire connection -------------------------------------------------------------------------------- Recommended accessories Connector M12x1, EEM 33-88, IP67, Art.No. 005633; Angled connector M12x1, EEM 33-89, IP67, Art.No. 005634 Available on request: Special rod 8 mm; Special plug-in flange 40mm; Special screw flange 3/4"-16UNF, TLI compatible versions; Industrial versions see data sheet TMI >>>
    View the product on novotechnik.de NOVOTECHNIK
    CUSTOM IGBT DIMMERS

    CUSTOM IGBT DIMMERS
    Custom Rack MCD/AT/10-16 Polaron's latest addition to its family of IGBT dimming racks is the flexible, custom built, plug-in modular MCD/AT/10-16 range. This design allows a mixture of input and output protection / distribution as well as essential auto-changeover circuitry to be integrated within the rack eliminating the need for external distribution boards. IGBT power handing devices provide the optimum dimming characteristic regardless of lamp / load type connected (see 'dimmable load types'), and eliminate the need for noisy RFI inductors (chokes). A range of rack sizes accepting from 8 to 64 x 10 or 16 Amp dimmers, provides one of the largest single rack systems available. These racks are natural convection cooled, requiring no fans or forced cooling. The MCD/U range is loaded with exciting modern features as listed below. FEATURES 10 or 16amp leading or trailing edge loads Switchable between leading and trailing edge Electronic short circuit, overload and over-temperature protection Manual ‘bypass to full’ switch per dimmer On board diagnostics with LED indication Optional onboard real-time clock RS232/485 inputs DMX input Alarm input (selectable-open/closed) CE Approved >>>
    View the product on polaron.co.uk Engel & Gibbs Ltd


    12Suivant >>Fin >
    Go to page


      Search    
     
     
     
    Search
    See all of the sector's products : Electricity/Electronics