Resistances :
27 products
AC LOAD BANK - HAC415-100
Hillstone AC load bank, Type ref: HAC415-100
- Simple operation
- Safety isolation contactors
- Fan fail protection
- High power up to 100KW
- Portable
- Fuse protection
The Hillstone HAC415-100
load bank is designed
for AC generator and UPS load testing
All units incorporate forced cooled high power
resistor elements and safety features including
fan fail, emergency stop push button
Specification
Type ref: HAC415-100
Nominal AC voltage ranges 415V
Frequency 50hz
Max power rating 107KW
Adjustment 1kW to maximum load via panel mounted switches
Panel mounted controls Emergency stop, Fan start control and load channel selection switches.
Cable termination chamber Stud connection for, 4 wire + earth, star connection via stud connections behind a
remove-able gland plate.
Cooling Fan 415V 50hz operation derived from the test source, rated at 3.5kW
Case size 1000mm long x 700mm wide x 930mm high plus castors.
Weight 95kgs approx
Finish Light grey 00A05 to a high quality textured paint finish
Resistor types 10mm diameter finned sheath elements with a tolerance of ±5%
Environmental protection rating Electrical controls IP54
Element chamber IP21
Designed for outdoor operation
Operating temperature range 0 – 40 deg C
Storage temperature range 0 – 80 deg C
Movement Swivel castors and lifting eye points
Optional extras Single phase operation
Operation for 60Hz testing
Panel mounted digital display, for Volts, Current, Watts and frequency
Hand held controller, with 10m or 20m control cable
PC interface and data logging software
>>>
View the product on hillstone.co.uk
Hillstone Products
AC LOAD BANK - HAC415-200
Hillstone AC load bank, Type ref: HAC415-200
- Simple operation
- Safety isolation contactors
- Fan fail protection
- High power up to 200KW
- Portable
- Fuse protection
- Option for PC data
logging
The Hillstone HAC415-200 load bank is designed
for AC generator and UPS load testing
All units incorporate forced cooled high power
resistor elements and safety features including
fan fail, emergency stop push button
Specification
Type ref: HAC415-200
Nominal AC voltage ranges 415V
Frequency 50hz
Max power rating 209KW
Adjustment 1kW to maximum load via panel mounted switches
Panel mounted controls Emergency stop, Fan start control and load channel selection switches.
Cable termination chamber Stud connection for, 4 wire + earth, star connection via removeable gland plate.
Cooling Fan 415V 50hz operation derived from the test source, rated at 3.5kW
Case size 1200mm long x 800mm wide x 900mm high plus castors.
Weight 150kgs approx
Finish Light grey 00A05 to a high quality textured paint finish
Resistor types 10mm diameter finned sheath elements with a tolerance of ±5%
Environmental protection rating Electrical controls IP54
Element chamber IP21
Designed for outdoor operation
Operating temperature range 0 – 40 deg C
Storage temperature range 0 – 80 deg C
Movement Swivel castors with fork lifting points
Optional extras Single phase operation
Operation for 60Hz testing
Panel mounted digital display, for Volts, Current, Watts and frequency
Hand held controller, with 10m or 20m control cable
PC interface and data logging software
>>>
View the product on hillstone.co.uk
Hillstone Products
AC LOAD BANK - HAC415-300
Hillstone AC load bank, Type ref: HAC415-300
- Simple operation
- Safety isolation contactors
- Fan fail protection
- High power up to 300KW
- Fuse protection
- Emergency Stop
The Hillstone
HAC415-300 load bank is designed for AC generator and UPS load testing
All units incorporate force cooled high power resistor elements.
Safety features including load bank shut down upon fan failiure.
The load bank remote control offer fan start, switched on / off contactor load selection.
On board load bank controls include emergency stop push button, control circuit on & off.
Cable terminations via gland plates.
Specification
Type ref: HAC415-300
Nominal AC voltage ranges 415V
Frequency 50hz/60hz
Max power rating 300KW
Load steps from 1kW to maximum load
Panel mounted controls Emergency stop & start button and load channel via iHHC remote controller
Cable termination chamber Stud connection for 3 phase, 4 wire + earth, star connection
Cooling Fans 415V 50hz operation derived from the test source
Case size 1750mm long x 1350mm high x 1300mm wide
Weight 300kgs approx
Finish RAL 7032 to a high quality paint finish
Resistor types 10mm stainless incoloy sheath elements
Resistor tolerance ±5%
Environmental protection rating Electrical Controls IP54
Element chamber IP21
Designed for outdoor operation and to be mounted for horizontal airflow
Integral designed sun shield
Operating temperature range 0 – 40 deg C
Storage temperature range 0 – 80 deg C
Movement Forklift pockets
Optional extras Trailer Mounting
Panel mounted digital display, for Volts, Current and Watts
>>>
View the product on hillstone.co.uk
Hillstone Products
AC LOAD BANK - HAC415-400 UK
Hillstone AC load bank, Type ref: HAC415-400 UK
- Simple operation via panel mounted switches or via iHHC remote hand
held controller
- Safety isolation contactors and fan failure load disconnect
-
Emergency stop load disconnection.
- High power rating up to 400KW
- Optional Digital Instrumentation Volts, Current, Frequency, KWatts
- Optional trailer mounting
The Hillstone HAC415-400 UK load bank is designed for AC generator or UPS load testing and
controlled from a common controller – the iHHC. Cable terminations are provided from a single
connection chamber. All units incorporate force cooled high power resistor elements.
Specification
Type ref: HAC415-400 UK
Nominal AC voltage ranges 415V
Frequency 50 Hz
Max power rating 400KW
Minimum Load adjustment 4 kW based on fan load with 1kW incremental steps thereafter
Panel mounted controls Energise control on/off rocker switch
Emergency stop,
Individual switched load steps
or
Remote hand held controller interface socket
Cable termination chamber Bus bar connection for 3 phase, 4 wire + earth contained in a IP54 connection
chamber and accessed via a re-moveable and un-drilled gland plate.
Cooling Fan 1 x 4kW 415V 50hz from the test source
Case size 1760mm deep x 2160mm wide x 1110mm high
Weight 700kgs approx
Finish RAL7032 to a high quality paint finish
Resistor types 10mm stainless elements, tolerance ±5%
Environmental protection rating Electrical Controls IP54
Element chamber IP21
Designed for outdoor operation and to be mounted for horizontal airflow
Integral designed sun shield
Operating temperature range 0 – 50 deg C
Storage temperature range 0 – 80 deg C
Movement Metal base with fork pockets
Options Alternative 3 phase voltage ranges include 380V, 400V, 480V, 660V, 690V
60Hz fan frequency
Digital meter display
UK road trailer
>>>
View the product on hillstone.co.uk
Hillstone Products
AC LOAD BANK - HAC415-500
Hillstone AC load bank, Type ref: HAC415-500 UK
Simple operation via panel mounted switches or via iHHC remote hand
held controller
Safety isolation contactors and fan failure load disconnect
Emergency stop load disconnection.
High power rating up to 500KW
Optional Digital Instrumentation Volts, Current, Frequency, KWatts
Optional trailer mounting
The Hillstone HAC415-500 UK load bank is designed for AC generator or UPS load testing and
interfaced from hand held controller – the iHHC. The load bank is supplied as a single unit which
incorporates 2 load modules. Cable connection ( based on 2 x120mm cables per phase ) use panel
mounted Powerlock connectors on each module.
Specification
Type ref: HAC415-500 UK
Nominal AC voltage ranges 415V ( for alternative voltages see extras below )
Frequency 50 Hz ( for alternative frequency see extras below )
Max power rating 500KW, 684A per phase
Minimum Load adjustment 4 kW based on fan load with 1kW incremental steps thereafter
Panel mounted controls Energise control on/off rocker switch
Emergency stop,
Individual switched load steps
or
Remote hand held controller interface socket
Cable connection 2 sets of panel mounted power lock connectors rated for 120mm cable per
phase.
Cooling Fan 2 x 2kW 415V 50hz from the test source
Case size 1400mm deep x 1600mm wide x 1200mm high
Weight 450kgs approx
Finish RAL7032 to a high quality paint finish
Resistor types 10mm stainless elements, tolerance ±5%
Environmental protection rating Electrical Controls IP54
Element chamber IP21
Designed for outdoor operation and to be mounted for horizontal airflow
Operating temperature range 0 – 50 deg C
Storage temperature range 0 – 80 deg C
Movement Supplied on swivel castors and fitted with lifting eyes
Options Alternative 3 phase voltage ranges include 380V, 400V, 460V, 480V, 660V, 690V
60Hz fan frequency
Digital meter display
UK road trailer
Metal base with fork pockets
>>>
View the product on hillstone.co.uk
Hillstone Products
