Rectification / Rodage / Affûtage / Ébavurage (translation in progress): suppliers, wholesalers and manufacturers on Hellopro
Search   


Rectification / Rodage / Affûtage / Ébavurage (translation in progress) :

88 products
Select the category
    Selection of 40 products among 88
    CUBIC BORON NITRIDE BLACK CBN - EXCELLENT GRINDING EFFECT

    CUBIC BORON NITRIDE BLACK CBN - EXCELLENT GRINDING EFFECT
    Cubic boron nitride is an ultra hard abrasive too. The microscopic hardness is less than that of synthetic diamond. It has advantages over synthetic diamond in its superior thermal stability and chemical inertness relating to the ferrous metals of the ferric family, therefore, it effectively remedies the deficiencies of diamond in these uses. CBN is produced by heating hexagonal boron nitride to sufficiently high temperature at high pressure in the presence of a metal catalyst. Its crystals are irregular, black with sharp edges. Therefore, an excellent grinding effect is available in grinding >>>
    View the product on forsun-tools.com Forsun Ultra-hard Material Industry Co.,Ltd.
    S12-CNC PRODUCTION EXTERNAL GRINDING MACHINE

    S12-CNC PRODUCTION EXTERNAL GRINDING MACHINE
    The basic concept of the S12 with a distance between centres of 150 mm, a height of centres of 175 mm and a grinding wheel diameter of 500 mm has been targeted at precision without compromise. The heart of the machine is a asked on high precision positionable linear motors completely new, patented drive/guide system b. The extremely rigid slides with hydrostatic bearings are magnetically pre-tensioned. The in-feed movement can be programmed in 10-nanometer steps. Precision: Axis movements in 10-Nanometer Stepps thanks to hydrostatic guideways and linear motor technology. Dynamics: infeed speed 30 m/min, Axis-acceleration up to 3 m/s2 Flexibility: Various wheel dressing concepts, Internal grinding spindle on a separate cross-slide, automatic handling. X axis 0 or 30 deg X axis: Hydrostatic with Linear motor or linear guide ways with re-circulating ball screws Z axis : Hydrostatic with Linear Motor or patented guide way with knob-structure and re-circulating ball screws C axis for workhead Internal grinding unit with separate cross slide for simultaneous grinding of Internal/External diameters Application specific Workheads (Hydrostatic, Motor spindle) Additional NC-Axis for the profiling of the grinding wheel Full enclosure with new door concept for optimal accessibility Machine base made of Granitan S103 mineral casting Large range of accessories Simplified programming with StuderWIN and Siemens 840D hardware Programming Software StuderGRIND for offline programming Standardised interfaces for loader and peripheral devices >>>
    View the product on studer.com Studer Groupe - K?r Schleifring
    DOUBLE-SIDED SURFACE GRINDING TO PERFECTION DDG 450

    DOUBLE-SIDED SURFACE GRINDING TO PERFECTION DDG 450
    The new DDG Product Range: Double-sided Surface Grinding to Perfection Highly competitive, with it’s space saving footprint, high precision and extremely cost effective design. The double-disk surface grinding machines in the new DDG product range from Peter Wolters offer economic effectiveness at its best. Everywhere the simultaneous grinding of parallel surfaces is required for a variety of workpieces. Four models, one pledge: long lasting precision from the first to the last part. Even under the harshest operating conditions. Cost effective drive technology and the fundamentally stable mechanical construction of the DDG product range offers the user the highest possible degree of operational flexibility. Equipped optionally with a horizontal or vertical grinding spindle arrangement, the double-sided surfacegrinding machine by Peter Wolters is proven in the most varied of fabrication environments. A vast range of proven handling systems and system components guarantee cost effective work piece transfer according to work piece shape and operating conditions. Loading and unloading may be carried out manually or automatically according to specific customer requirements. Various machining processes are available for an optimal quality and throughput of the work pieces. DDG machines offer optional grinding processes, plunge-cut grinding or combined continuous-plunge-cut grinding. Because of their space saving design (small footprint) the DDG product range machines are easy to integrate into new or existing machining operations. >>>
    View the product on peter-wolters.com Peter Wolters France
    PROFILE GRINDERS - STARLINE 2000CNC

    PROFILE GRINDERS - STARLINE 2000CNC
    Our Starline 2000 family offers the user everything required for grinding applications in surface, profile and creepfeed grinding. Grinding area 1000 x 500 to 2700 x 620 mm Spindle drive 15 kW to 65 kW Distance table to spindle centerline 800 mm Optimal dynamic, static and thermal strength in all machine axes. Excellent quality of the workpiece surface. An optimal selection of dressing technologies, including CNC-controlled, driven profiled diamond wheel, pre-profiling and crushing with diamond rollers. This model range is ideal for production and automation right up to robot systems. >>>
    View the product on aba-grinding.de aba z&b Schleifmaschinen
    INDEXABLE INSERT GRINDING MACHINES - 350 T&B

    INDEXABLE INSERT GRINDING MACHINES - 350 T&B
    Highly precise surface grinding machine for the machining of indexable inserts and other similar workpieces made out of tungsten carbide, CERMET, ceramics, CBN and HSS. The AGATHON 350 T&B machine has been developed to grind one or both surfaces for always smaller batch sizes with minimum retooling and expenditure. The machine can be used in combination with several periphery grinding machines. Massive and stable dimensioning of the most important elements such as base, grinding spindle and infeed slides are guarantee for high precision and productivity. The workpieces are positioned in shaped masks. Principal design features: Compact construction Full protection on the grinding area Easy operation via hand-terminal Variable grinding speed Integrated dressing attachment Manual loading as well as >>>
    View the product on agathon.ch AGATHON
    CAMSHAFTS GRINDING - RLE

    CAMSHAFTS GRINDING - RLE
    DOIMAK machine for the camshaft grinding, model RLE -800, is last generation machine, which is characterised for its high accuracy and production capacity. It has been designed with the most advanced methods for calculation and CAD design, and it includes the last technology in the field of digital drives, with the aim of achieving a machine for production of large series. Technical specifications Distance between points: 800 to 3.000 mm. • Height of points: 200 mm. • Max wheel stroke: 250 mm. • CBN wheel dimensions: Ø305 x 20 mm. • Peripheral wheel speed: variable till 120 m/s. • Wheel spindle power: 30 kW. • Max. part rotating speed: 500 rpm. • Max diamond disc speed: 14.000 rpm. >>>
    View the product on doimak.es Doimak
    NOVEFLEX GRINDING MACHINE

    NOVEFLEX GRINDING MACHINE
    It is the internal grinding machine of Emmerre srl. The machine, structurally and functionally conceived to meet various production requirements, works with: * WORKSPINDLE TABLE – X AXIS * WORKHEAD CARRIAGE - Z AXIS * WORKHEAD * INTERNAL WORKSPINDLE CARRIER * ELECTROSPINDLE CNC controlled. It performs internal, external, facing, grinding operations with straight or slanted grinding wheel approachs as well as sequential machining of different diameters with a single workpiece set up: >>>
    View the product on ottoflex.it Ottoflex
    GLASS STICK - GLASS GRINDING AND BEVELING

    GLASS STICK - GLASS GRINDING AND BEVELING
    Dressing Sticks for the Glass Industry BORIDE Engineered Abrasives manufactures sticks for cleaning and conditioning of diamond wheels used for glass grinding and beveling. With over 30 years experience as a leading producer, we fine tuned our process to ensure that our customers use the right stick for the right application. Our bonds are designed to promote extended diamond wheel life and to help reduce edge chipping. Glass Stick Feature: A wide selection of thicknesses and lengths in both standard and metric sizes Grit sizes 80 to 400 Several formulations available to meet your dressing requirements Professional inkjet marking available to customize your products Multiple color products available >>>
    View the product on borideabrasives.com BORIDE
    CHASER GRINDING FIXTURE

    CHASER GRINDING FIXTURE
    For use on surface, universal tool, and cutter grinders, the No. 15 and No. 20 fixtures are used to grind the cutting angles on Landis die head chasers. The No. 15 die head chaser fixture and No. 15T tap chaser fixture use a common base which allows the same fixture, when appropriate auxiliary equipment is added, to grind both types of chasers. Capacity: No. 15 1/2" to 1-1/4" wide die head chasers No. 20 7/8" to 4-3/8" wide die head chasers No. 15T tap chasers for 1" to 12" size tap heads >>>
    View the product on landisthreadingsystems.com Landis Threading Systems Groupe - Allegheny Technologies
    GRINDING CENTER - GCS I/E

    GRINDING CENTER - GCS I/E
    External and Internal compact grinding center, the gc-si/e makes it possible to grind in sequence internal and external diameters without removing the workpiece. Complete with a modern CNC with interactive programming. General specifications: -distance between the centers: mm 600 - 900 -center height: mm 171 -max. grindable length between the centers (external): mm 600 - 900 -continuous max. weight allowed between the centers: kg 150 -min. grindable diameter (external): mm 10 -distance between spindle nose and internal carriage: mm 1100-1400 -max. grindable diameter (internal): mm 160 -approximate machine weight including accessories: kg 6000 - 6800. >>>
    View the product on morara.it Morara
    INTERNAL GRINDING MACHINE - IG-150-NC

    INTERNAL GRINDING MACHINE - IG-150-NC
    Machine bed is made of high quality-"MEEHANITE" cast iron, which is heat-treated and precision ground, to ensure the machine stable and durable. All slide beds adopt automatic static pressure lubrication system so that all the slide ways will move smoothly with good torsion and ensure the best accuracy. High accuracy & performance with automation programmable plunge grinding cycle, i.e. rough grindings ? finish grinding ? dressing cycle automatically. It leads to easy operation, increasing the productivity and shall be the most suitable to the components for mass production, as well as to the multiple workpieces with less quantity demand. Wheel head spindle driven by high accuracy roller bearing which will keep the highest stiffness and quiet peripheral speed. The swivel angle will be available for forward moving 8°, backward 7°, which is the most suitable to the workpiece with slopes. >>>
    View the product on grinding.com.tw Palmary Machinery
    CONCRETE FLOOR GINDER

    CONCRETE FLOOR GINDER
    Concrete Floor Ginder The pictures are of a hydraulic powered floor grinding machine, it is totally self sufficiant and powered by a 4.2 litre turbo charged diesel engine, with a super clean exhaust suitable for indoor use. The height of the diamond tipped cutting heads, which are hydraulically driven, is adjusted by hydraulic cylinders which are controlled by a rotating lazer beacon. The cutting heads are cooled by clean water injected through the centre of each head which is then picked up by a vacuum system driven by the engine. The horizontal position of the cutting heads can be adjusted hydraulically equally about the machines centre line. The movement of the machine is also hydraulically driven and can be adjusted from 5 metres per hour to 5Km per hour, the machine also has hydraulic powered steering. The machine has tanks for diesel, hydraulic oil, clean and dirty water which can all be replenished whilst the machine is in operation. >>>
    View the product on hydraulicsolutions.co.uk Peter Wright Associates
    SHANK NOTCH GRINDING MACHINE - CNC235NM

    SHANK NOTCH GRINDING MACHINE - CNC235NM
    Specifications APPLICATION Notching of dental and medical tool shanks. GRINDINGRANGE Tool Ø (head) Up to 10mm Shank Ø 1.0 - 3.175mm (.04" - .125") Clamping system Chuck Notching style All styles CONTROL Programming Free programm Z axis Stroke 35mm (1.37") Resolution 0.001mm (.00004") X axis Stroke 90mm (3.54") Resolution 0.001mm (.00004") A axis as a workhead 600 r.p.m. A axis as a CNC axis Resolution 0.005° ROBOT Shank &0slash; Up to 1/8" (3.175mm) Overall length 165mm (6.5") NOTCHING Grinding spindles Ø 60mm (2 spindles) Grinding motor 0.55kW, 0.8hp (max. 6'000 r.p.m.) Grinding wheels 2 x Ø 180mm /2x Ø 140mm HYDRAULIC UNIT Oil tank 10 liers (2.6 US Gal.) Oil pressure 10 bars (145 PSI) MACHINE L x W x H 1510 x 1600 x 1640mm (60" x 62" x 64") Net weight 1400kg (3000lbs) Total power Maximum 4.5kW >>>
    View the product on rollomatic.ch Rollomatic
    PLUNGE GRINDING MACHINE

    PLUNGE GRINDING MACHINE
    Plunge grinding machines may be used to surface finish high quality parts which must not touch each other during the finishing process. Typical parts are: turbine disks blades medical implants high quality door handles, etc. In a Rösler plunge finishing system, the parts are attached to a high-speed rotating spindle, which is then lowered into a work bowl filled with grinding or polishing media. The spindle is not limited to rotational action. In addition, vertical oscillation and eccentric orbital movement can be used to enhance the grinding action. >>>
    View the product on rosleruk.com Rosler UK
    S20- UNIVERSAL CYLINDRICAL GRINDING MACHINE

    S20- UNIVERSAL CYLINDRICAL GRINDING MACHINE
    The Compact for small precision components The S20 is designed for the grinding of workpieces in individual as well as small and large series production operations. It is ideal in all sectors where small precision components are produced. It is very easy to operate and the machine can be reset within a very short time. Distance between centres of 400 (15.7”) or 650 mm (25.6”) Cross slide with wheelhead for external grinding with grinding wheel on the right and location area for the internal grinding unit The wheelhead can be swivelled 15 and 30 deg Automatic grinding cycles for plunge-cut and traverse grinding Machine table with +/-30 deg swivel range Partial enclosure Extensive range of accessories >>>
    View the product on studer.com Studer Groupe - K?r Schleifring
    CNC INTERNAL GRINDING MACHINES - T-11JA/T-11JAG/T-11JAS

    CNC INTERNAL GRINDING MACHINES - T-11JA/T-11JAG/T-11JAS
    Chuck Type High-performance CNC internal grinding machines capable of continuous grinding of multilevel surfaces and external surface grinding, as well as machining of products with an external diameter of up to 350 mm and an internal diameter of up to 170 mm. T-11JAG: CNC internal grinding machine based on the T-11JA, designed for mass production and equipped with a gantry loader as standard. Provides fully automatic grinding of the internal surfaces and end faces of components such as gears. T-11JAS: CNC internal grinding machine based on the T-11JA, equipped with a very rigid work shaft and rotary dresser. Suitable for medium-quantity, mixed-model machining of products such as die components and gears. Quadruple-wheel-head turret option: The T-11JAG-4S and T-11JAS-4S specifications add to the above two models continuous high-precision grinding of multiple surfaces and fully automated operation. >>>
    View the product on toyo-at.co.jp/eindex.html Toyo Advanced technologies
    HIGH PRODUCTION SURFACE GRINDING TFG150

    HIGH PRODUCTION SURFACE GRINDING TFG150
    The Thru-Feed Grinder is a production flat machining process that does most everything a conventional double disc or vertical spindle grinder can do and a great deal more. The Thru-feed grinder is the most efficient method known for high production surface grinding of small to mid size parts because it practically eliminates non-productive time.With the Thru-Feed Grinder, all machine time is grinding time, little is lost on fixturing and preparation such as set-up, and loading and un-loading of parts. Parts of almost any material and shape are fed into the Thru-Feed Grinder via a conveyor belt passing beneath a grinding wheel and finished parts are discharged continuously. It’s truly a high production grinding system. >>>
    View the product on peter-wolters.com Peter Wolters France
    SURFACE GRINDING MACHINES - ECOLINE

    SURFACE GRINDING MACHINES - ECOLINE
    Our ECOLINE model range represents economic efficiency, excellent price/value ratio, reliability and ease of service. The machine is also available with a linear motor table drive system (see page 23). Specifications Grinding area 800 x 600 to 2000 x 800 mm Spindle drive 7.5 kW to 26 kW Distance table to spindle centerline 700/900 mm A fully equipped precision machine with paper band filter, electro-permanent magnetic chuck and dressing system. Only high-grade, tried and tested components are used in order to guarantee maximum reliability. This model range is designed for toolrooms, dieshops, mold makers, jigmaking, mechanical engineering as well as production applications. The optional linear motor table drive system (60 m/min.) guarantees highest precision even on extremely difficult workpiece geometries while reducing the cycle time. >>>
    View the product on aba-grinding.de aba z&b Schleifmaschinen
    INDEXABLE INSERT GRINDING MACHINES - 400 COMBI

    INDEXABLE INSERT GRINDING MACHINES - 400 COMBI
    Featuring K-Lands and chip breaking grooves, the 400 COMBI is capable of grinding both sides of an indexable insert in one clamping. The universal field-proven machine concept of the earlier 350 COMBI, has been continued with the 400 COMBI, whereby the machine’s efficiency has dramatically increased. The new 400 COMBI 4-axis insert grinder offers maximum efficiency and reliability. A large variety of inserts, from the very simple ISO-standard insert to the most demanding inserts (e.g. inserts for the manufacturing of crankshafts), can be ground entirely in one single operation. Principal design features: Fastest transfer movements by means of linear and torque motors Optimized movements of axes and collision control by means of newest software Centrifuge (Turbo separator) Digital drives Process optimization through new dressing possibilities (patent pending) Remote fault finding via Internet Vision System integrated in the loading robot head Data administration in SQL data base >>>
    View the product on agathon.ch AGATHON
    CYLINDRICAL GRINDING MACHINE - RCN

    CYLINDRICAL GRINDING MACHINE - RCN
    Technical specifications STRAIGHT WHEEL Grinding length: 500 to 3.000 mm. • Max. diameter: 600 mm. • Wheel diameter: 500x80x305 mm. • Wheel head of 11 kW. • Peripheral wheel speed: 45 and 60 m/s. • CNC: SIEMENS 840D. ANGULAR WHEEL Grinding length: 500 to 3.000 mm. • Max. diameter: 400 mm. • Wheel diameter: 760x120x305 mm. • Wheel head of 15 kW. • Peripheral wheel speed: 45 and 60 m/s. • CNC: SIEMENS 840D. >>>
    View the product on doimak.es Doimak
    OTTOCAM GRINDING MACHINE

    OTTOCAM GRINDING MACHINE
    T is the cylindrical grinding machine with hydromagnetic levitation suitable to work complex form of pieces. OTTOCAM is developed thanks to the collaboration of our design department with American and German manufacturers of linear motors, it has been designed with a technology which combines the hydrostatic support and high-resolution optical lines, enables to eliminate completely any friction and reverse play. >>>
    View the product on ottoflex.it Ottoflex




      Search    
     
     
     
    Search
    See all of the sector's products : Manufacturing and processes