Reagents and additives: suppliers, wholesalers and manufacturers on Hellopro
Search   


Reagents and additives :

34 products
Select the category
    Selection of 34 products among 34
    ANALYTICAL VOLUMETRIC SOLUTIONS

    ANALYTICAL VOLUMETRIC SOLUTIONS
    Reagecon manufacture a complete range of volumetric solutions for all analytical laboratory applications which can be used for manual or automatic titrations. These are available as ready to use aqueous and non-aqueous titrants and in concentrated format. READY TO USE AQUEOUS SOLUTIONS This range of standardised solutions provides a convenient method for accurate volumetric analysis in the laboratory and a cost-effective answer to time and labour consuming preparation problems. These products are certified to a specification as outlined in the Certificate of Analysis. Lot No. and Expiry Date are printed on the label. Where possible, all of these solutions are certified traceable to N.I.S.T and this will be stated in the Certificate of Analysis. Please Note: All 10 litre pack sizes are in “Bag-in-Box” containers. (Please contact your distributor/Reagecon if you require 5L or 20L pack size “Bag-in-Box”). >>>
    View the product on reagecon.com Reagecon
    IN-MOULD PAINTS

    IN-MOULD PAINTS
    To complement our pigment dispersions we have developed the eclipse range of one-pack polyurethane paints, available in solvent or water based carriers. Eclipse paints are used as in-mould paints prior to moulding or formulated to allow post application. These paints can be used to mask minor defects or mould flow lines whilst opening opportunities to produce finishes and effects previously limited to post applied paints. Our paints are based on Aliphatic polymers and provide exceptional UV resistance, enabling the possible removal of expensive UV resistance additives from the polyurethane system. We can include flexing and matting agents, conductive pigments and a variety of finish effects, metallic, pearlescent and textured. Colour match service : * Colour match to any recognised colour reference such as RAL, Pantone, BS number or physical sample. * 5 working day colour match service * Matched colour spray-out card provided * 1Ltr sample of paint provided * Minimal charge to cover match and postage >>>
    View the product on eclchem.com ECL Chemicals Ltd
    DPD POWDER PACK REAGENTS

    DPD POWDER PACK REAGENTS
    Orbeco-Hellige’s new Powder Pack Reagents are pre-measured, unit dose DPD reagents that have been specifically formulated for use in Hach* colorimeters, spectrophotometers and test kits as well as in Orbeco-Hellige’s new colorimeters and test kits. The DPD Powder Packs are available in 5 mL, 10 mL and 25 mL sample sizes and come in 100 or 1,000 count packages. *Hach is a registered trademark of the Hach Company. >>>
    View the product on orbeco.com Orbeco Analytical Systems
    AEROSOL PAINT

    AEROSOL PAINT
    The Speedi Spray is The Needham Group's general-purpose aerosol paint supplied in a large (400ml) aerosol can. It is a high quality, fast drying paint manufactured using an acrylic resin making it suitable for interior and exterior use. It provides excellent coverage and adhesion on a very wide variety of porous and non-porous surfaces and produces a quick drying, high contrast, bleed-free mark. When dry, the ink is waterproof and oil-resistant. As with any spray paint, the Speedi-Spray can be used for spraying directly onto a surface. It also provides a "clean" solution for stencilling applications - eliminating the need for rollers and ink pads. The Speedi Sprays are available in 6 standard colours: Black, Blue, Green, Red, White and Yellow. Our Britink Speedi Sprays are CFC-free and contain no propellant alleged to damage the ozone. >>>
    View the product on needham-group.com The Needham Group - Coding Systems Division
    MERCK VOLUMETRIC SOLUTIONS

    MERCK VOLUMETRIC SOLUTIONS
    To ensure the most accurate and reproducible volumetric titrations you’ll need the highest quality reagents. Titripac® is the name of Merck’s range of ready-to-use volumetric solutions which are supplied in an innovative bag-in-a-box type of packaging. Available in either a 4 litre or 10 litre pack, the flexible and hermetically sealed Titripac® prevents any contamination caused by air or micro-organisms with the result that the titre and pH remain the same from the first to the last drop. A batch specific certificate of analysis detailing all the information relevant to good quality management and documentation is supplied with each Titripac®. Merck volumetric solutions are directly traceable to NIST standard reference materials. >>>
    View the product on uk.vwr.com VWR
    APTICOTE 2020 ADVANCED COMPOSITE CYLINDER LINER COATING

    APTICOTE 2020 ADVANCED COMPOSITE CYLINDER LINER COATING
    The Apticote 2020 cylinder bore coating represents a step change in bore coating technology, providing superior performance to that given by conventional Ni/Ceramic composite electroplates. Power is increased, streaking is eliminated, and piston skirt and ring wear is reduced.# High hardness# Low friction# Anti-streaking# Little on no wear# High precision# Coats any substrate# Easy honing# Compatible with any piston ring or piston. >>>
    View the product on poeton.co.uk Poeton Industries Ltd
    SPECIALTY / FUNCTIONAL COATINGS SPECIALTY / FUNCTIONAL COATI

    SPECIALTY / FUNCTIONAL COATINGS SPECIALTY / FUNCTIONAL COATI
    Steam/Wetting Promoter In steam irons, sole plates treated with LUDOX® colloidal silica help water droplets spread evenly on the surface of the steam chamber and quickly turn to steam. This reduces the tendency of the iron to expel water droplets from the steam chamber onto the fabric being ironed. Colloidal silica may be used to improve wetting or adhesion properties of a variety of substrates. Photographic Coatings LUDOX® colloidal silica can be used to strengthen photographic films and improve resistance to roller marks. >>>
    View the product on grace.com Alltech Associates Ltd
    IN-MOULD PAINTS

    IN-MOULD PAINTS
    To complement our pigment dispersions we have developed the eclipse range of one-pack polyurethane paints, available in solvent or water based carriers. Eclipse paints are used as in-mould paints prior to moulding or formulated to allow post application. These paints can be used to mask minor defects or mould flow lines whilst opening opportunities to produce finishes and effects previously limited to post applied paints. Our paints are based on Aliphatic polymers and provide exceptional UV resistance, enabling the possible removal of expensive UV resistance additives from the polyurethane system. We can include flexing and matting agents, conductive pigments and a variety of finish effects, metallic, pearlescent and textured. Colour match service : * Colour match to any recognised colour reference such as RAL, Pantone, BS number or physical sample. * 5 working day colour match service * Matched colour spray-out card provided * 1Ltr sample of paint provided * Minimal charge to cover match and postage >>>
    View the product on eclchem.com ECL Chemicals Ltd
    SP310 HEMA-STAR

    SP310 HEMA-STAR
    The product guarantees exceptional performance every time. It is a one-step rapid blood stain formulated from the most pure components available combined with a buffer system the encourages rapid staining while providing optimal pH conditions upon dilution. Just apply stain and rinse. Brilliant results are obtained in 1-2 minutes. Sample and technical literature on request. >>>
    View the product on gccdiagnostics.co.uk GCC Diagnostics
    SYLOID® MATTING AGENTS FOR COATING

    SYLOID® MATTING AGENTS FOR COATING
    When it comes to choosing matting agents to enhance your coating surfaces, SYLOID® matting agents are the leading products in the industry. SYLOID® matting agents exhibit unique characteristics and are available with a wide range of properties to address your most demanding coating needs. Our products are made with the highest quality materials, providing our customers with reliable performance product consistency >>>
    View the product on grace.com Alltech Associates Ltd
    COD VIALS & COD STANDARDS

    COD VIALS & COD STANDARDS
    COD Reagent Vials As well as being compatible with the PC Compact COD Vario, Reagecon’s COD Reagent Vials can also be used in conjunction with the Aqualytic PC Spectro and all Hach TM spectrophotometers. This compatibility is proven in the Reagecon Technical Publication, “A comparative study of the performance of Reagecon COD vials and Hach TM COD vials” – available in the Technical section of Reagecon’s website – www.reagecon.com. Reagecon supply COD Reagent Vials and also offer a collection and disposal service for used vials that complies with all relevant dangerous goods disposal and environmental regulations. >>>
    View the product on reagecon.com Reagecon
    SP315 HEMA-STAR CONCENTRATE KIT

    SP315 HEMA-STAR CONCENTRATE KIT
    Exactly the same performance as HEMA-STAR . This kit provides the reagents seperately in concentrate form. Therefore allowing reagent to be made up fresh each time which is a certain way to guarantee unbeatable stain stain performance each time. All rapid blood stains have short shelf lives. This kit with separate components has exceptionally long life with brilliant performance guaranteed to the last drop. >>>
    View the product on gccdiagnostics.co.uk GCC Diagnostics
    SYLOWHITETM TIO2 EXTENDERS SILICATE FOR PAINT AND INK INDUSTRY

    SYLOWHITETM TIO2 EXTENDERS SILICATE FOR PAINT AND INK INDUSTRY
    SYLOWHITE™ Precipitated Silicate for the Paint and Printing Ink Industry Through the use of SYLOWHITE™ SM 405 Silicate, the consumption of titanium dioxide can be significantly reduced without negatively affecting the hiding power and brightness of paint. SYLOWHITE™ SM 405 Silicate is a precipitated amorphous sodium aluminum silicate with a particle size of less than 6.0 µm, and is well established as a TiO2 extender for coatings. >>>
    View the product on grace.com Alltech Associates Ltd
    SP350 RETICULOCYTE STAIN

    SP350 RETICULOCYTE STAIN
    In the past certain stains have proved unreliable on a batch by batch basis for demonstrating reticulocytes. Our formulation uses purfied components in a buffered solvent system that can be controlled for quality far more reliable than earlier techniques. The method involves a short incubation period after which reticulo-filamentious material will stain dark blue, clearly defined against a pale greenish background. >>>
    View the product on gccdiagnostics.co.uk GCC Diagnostics
    APTICOTE 450 ELECTROLESS NICKEL COMPOSITES

    APTICOTE 450 ELECTROLESS NICKEL COMPOSITES
    APTICOTE 450 is a unique, improved self-lubricating Nickel+PTFE Composite that gives even lower friction and greater load-carrying capacity than all other similar nickel/polymer coatings. And now, by adopting innovative refinements to the process chemistry, Poeton have made yet further improvements to the coating. As a consequence, the friction is even lower and the wear resistance is greater. >>>
    View the product on poeton.co.uk Poeton Industries Ltd
    APTICOTE 900 CADMIUM

    APTICOTE 900 CADMIUM
    APTICOTE 900 is an electrolytic process that can deposit protective cadmium coatings on to a variety of base materials to produce a degree of corrosion protection unmatched by other sacrificial coating systems. * Superb corrosion protection; (> 2,000hrs salt spray) * Low friction (0.15 vs steel) * Ductile, self-healing * Small volume growth when oxidising * No final grinding * Can be chromate passivated for enhanced corrosion protection. >>>
    View the product on poeton.co.uk Poeton Industries Ltd




      Search    
     
     
     
    Search
    See all of the sector's products : Chemicals