Selection of 80 products among
1108
DECORATIVE WIRE MESH
Hengli supplies polyester mesh used as decorative materials for facade, diversion, ceiling, shading, Terrace and corridors, columns surface decoration, rolling screens, decorative of staircases and
channels in high grade interior decoration of restaurants, offices, exhibition hall and shops. This kind of decoration is not limited by the space, with simple installation. It gives an extreme outstanding modern sense with the light effect.
>>>
View the product on polyestermesh.net
Raoyang county Hengli Fabric Factory
B20 SERIES DEOILING HYDROCYCLONE
Overview
Cyclotech’s B20 Series Deoiling Hydrocyclone liner represents the
state of the art in produced water treatment technology, a third
generation geometry optimising the critical balance
between oil
removal effi ciency and capacity, ensuring that peak separation is
achieved in the most cost effective and space effi cient manner.
The B20 Series Deoiling Hydrocyclone is used to treat water
streams containing up to 5,000 mg/l oil with a requirement to
meet a discharge water oil content of 30 mg/l, or more commonly
stretch targets of as low as 15 mg/l. For demanding process
requirements, the B20 Series has been specifi cally designed for
use with Cyclotech’s novel PECT-F® performance enhancement
pre-coalescer and integrated with Cyclotech’s DeepSweep® CFU
systems for ultimate separation performance.
The B20 Series has proved itself to be one of the most effi cient
Deoiling hydrocyclones available to the Oil & Gas industry with
an enviable globally installed base on both onshore and offshore
facilities.
Principle of Operation
A hydrocyclone has no moving parts and achieves liquid/liquid
separation by virtue of a pressure drop across the unit. Oily water
is forced under pressure into the inlet section of the liner via a
tangential inlet port. This, together with narrow cyclone diameter,
causes the fl uid to spin at high velocity, which creates a high g
radial acceleration fi eld. Oil, the less dense liquid, is forced to the
axial centre of the hydrocyclone to form a thin oil core. Through
internal hydrodynamic forces and external differential pressure
control, this oil core is removed counter currently via an axial port
adjacent to the inlet while the clean water fl ow is discharged from
the cyclone tail pipe.
Hydrocyclone Liner Design
The hydrocyclone geometry is critical to achieve optimal
separation performance. Deoiling hydrocyclone designs cannot
be scaled up, and so the B20 hydrocyclone liners are manifolded
together in a common vessel to achieve the required system
fl owrate. The ultra-slim external dimensions of the B20 Series
liner has been designed to provide market leading liner packing
effi ciency to maximize process throughput within a given vessel
without compromising on performance.
Cyclotech B20 Deoiling Hydrocyclone liners are most commonly
manufactured in Duplex Stainless Steel. For erosive applications,
Cyclotech offers liners with all inlet and tapered internal surfaces,
exposed to high fl uid velocities, manufactured from a range
of wear resistant materials. These include Stellite 6, Tungsten
Carbide or Reaction Bonded Silicon Carbide, an advanced ceramic
that will provide a wear live of up to 10 times that of a standard
Duplex liner.
High Turndown Vessel Design
For applications requiring very high turndown, Cyclotech offers
its HTD compartmentalised vessel approach. Internal baffl es are
used to divide the vessel into either two or three compartments.
Each compartment can be switched in or out of service using
external valving, effectively providing a number of hydrocyclone
liner banks within a single vessel housing. This operation can be
automated. The Cyclotech HTD design has considerable benefi ts
over traditional methods to increase turndown as it removes the
need for either blanking liners or multiple vessels. In a typical
installation, the Cyclotech HTD design can increase turndown
from 3:1 to 10:1 for a two compartment and over 50:1 for a three
compartment HTD vessel.
New-Build Systems
Cyclotech’s B20 Series Deoiling hydrocyclone systems form an
integral part of our Produced Water Treatment capability. These
systems can range from fully automated packaged systems to
stand alone vessels. Standard pressure vessel designs are available
at most design pressures and temperatures.
>>>
View the product on cyclotech.com
Cyclotech Ltd
DURELAST™ POLYURETHANE ELASTOMERS
DURELAST™ polyurethane elastomers are highly versatile materials, offering virtually total design freedom and genuine practical advantages.
DURELAST™
polyurethane elastomers give a design
flexibility quality and performance impossible to obtain cost-effectively with any other methods and materials.
• Colours that do not chip, peel, scratch or fade
• Suitable for proud, recessed, textured and complex profiles
• Seamless, hygienic moisture-resistant seals
• Simple, cost effective processing
• Resistant to impacts and abrasion
• Adheres well to wood surfaces and cannot be removed.
DURELAST™ polyurethane elastomers are high-performance materials designed for furniture profiling and architectural finishing. They are used widely in domestic and commercial environments such as retailers, banks, airports, hotels, schools, kitchens and restaurants.
The DURELAST™ range is structured around six neutral coloured base
materials, which offer a flexible choice of chemical and physical properties for individual application requirements.
These materials can be pigmented to any existing BS or RAL standard, or
colour matched precisely to a sample.
Dow Hyperlast has fine-tuned its tinting techniques to ensure the fastest service enabling the processor a quicker turnaround, a benefit that can passed on to the end user.
In addition, materials are available in small batches, competitively priced and
supported by a responsive technical service for fast problem solving.
>>>
View the product on hyperlast.com
Dow Hyperlast
ANTI-REFLECTIVE GLASS - AMIRAN®
AMIRAN® is an optical interference anti-reflective glass, dip-coated on both sides, with a residual reflection of approximately 1%. In cases where there is a drastic difference in the level of light
in front of and behind ordinary glass, it is usually quite difficult to view objects outside from the inside. In order to avoid these negative effects, more and more users are turning to AMIRAN®, the nearly invisible glass from SCHOTT.
AMIRAN® - The most important advantages at one glance
Effective prevention of reflections
In comparison with uncoated glasses, AMIRAN® reduces the rate of reflection to one-eighth. Any time inviting transparency is required, AMIRAN® is the perfect choice.
Versatile processing capabilities
AMIRAN® can be worked and processed into tempered safety glass, laminated sheet glass or curved glass, for example, as easily as conventional glass.
Easy to clean
If treated properly, AMIRAN® can be cleaned just like ordinary glass. Even the most challenging stains can be removed using the proper cleaning agents.
Outdoor use
Due to its excellent resistance to weathering, AMIRAN® can be put to use in point-mounted facades, structural glazing or post and bar constructions.
>>>
View the product on schott.com
SCHOTT UK Ltd
HERTALAN EASY COVER MEMBRANES
Prefab made membranes with BBA certificate 91/2728/C;
Hot-Bonding technic;
Suitable for every roof system;
Membrane dimensions:
hertalan easy cover max. 30 m x 70 m
hertalan easy cover MF
max. 10 m x 20 m
Weight approx.: 1,23 kg/m²/mm;
Material thickness: 1,2 / 1,5 / 2,0 mm
Application area:
New build and refurbishment projects;
Every roofing system;
Walkways, (normal foot traffic) min. 2 mm thickness;
Balconies;
Basins/Canals;
Fresh water storage [hertalan DWQ].
Quality Aspects:
Long Life: +35 years for the system
Application without naked flame
Rapid installation utilising pre-fabricated membranes
Biologically and Ecologically safe in construction applications
Low maintenance (see chapter 10)
On-site thermal welding is possible with hertalan easy weld & easy flashweld
Certified quality meeting the following standards:
BBA
KOMO -UEAtc - Product certificate # K4276
ATG 1957
DIN 7864 - certificate
High tensile strength and elongation at break
100% ozone and UV - radiation resistance
Permanent elasticity
Resistant to many chemicals (List available on website)
Resistant to root penetration (FLL approved in accordance with DIN 4102 T7)
Self extinguishing (NEN 6383)
Bitumen resistant
Excellent temperature stability from - 70 to + 120ºC
>>>
View the product on hertalan.co.uk
Hertalan Ltd
