RF wave processing: suppliers, wholesalers and manufacturers on Hellopro
Search   


RF wave processing :

44 products
Select the category
    Selection of 40 products among 44
    10 WATT 1 µM SINGLE FREQUENCY PM FIBER AMPLIFIER

    10 WATT 1 µM SINGLE FREQUENCY PM FIBER AMPLIFIER
    The Nufern NuAMP SF series of high power, polarization maintaining fiber amplifiers are specifically designed to operate in conjunction with ultra narrow linewidth, single frequency seed lasers based on distributed feedback (DFB) fiber lasers or solid state technologies. Capable of amplifying low power input signals with kHz linewidth to 2, 5, and 10 W of power, these monolithic amplifiers use large mode area fiber technology to overcome non-linearities such as stimulated Brillouin scattering (SBS) and maintain critical seed laser characteristics such as narrow linewidth and relative intensity noise (RIN). The NuAMP SF series includes input isolation (>30 dB) and input/output interlocks to prevent system failure and to protect the seed source (response time of < 10 µsec). >>>
    View the product on nufern.com Nufern
    COUPLERS 3DB SIDEWALL

    COUPLERS 3DB SIDEWALL
    Micro Metalsmiths manufactures a range of waveguide hybrid couplers as standard items. Hybrid couplers are available in either sidewall or topwall topologies. They typically have 10% bandwidth, and are available in waveguide sizes WG6 to WG22 (WR650 to WR28). 3 dB power splits are provided as standard, but different power splits (such as 6 dB or 10 dB) can be provided upon request. They are available with either flanges or sockets and in either aluminum or brass. >>>
    View the product on micrometalsmiths.com Micro Metalsmiths
    LASER FEMTOREGEN™ SERIES

    LASER FEMTOREGEN™ SERIES
    All-In-One Femtosecond Oscillator / Regenerative Amplifier * NEW: femtoREGEN™ Ultra Compact UC-1035-2000 with 2 W and 200 kHz at highest beam stability in the market (please see data sheet) * 1035 - 1053 nm, down to 250 fs, up to 1 mJ, up to 4 W, up to 500 kHz * Integrated femtoTRAIN™ seed laser with semiconductor saturable absorber modelocking (SESAM) * All-diode-pumped solid state technology * Compact and modular set-up * TEMoo beam profile * High temporal and spatial stability * Single phase power supply * Air-cooled closed loop chiller (included) Please ask for * NEW: Femtosecond OPA: Tunable output from 200nm to 3000nm * Frequency conversion: SHG, THG, FHG * Different laser materials * Different pulse durations * Pulse Picker >>>
    View the product on highqlaser.at High Q Laser Production
    ATTENUATOR ES MEMS VOLTAGE-CONTROLLED

    ATTENUATOR ES MEMS VOLTAGE-CONTROLLED
    The JDSU Agile Optical Components family includes modulators, switches, attenuators and tunable filters. These products provide the basis for spectrally efficient DWDM transmission utilizing dispersion tolerant modulation, channel monitoring, wavelength switching, remote power control and dynamic channel selection. They support a wide range of flexible functionalities at lower operational expenses for the Agile Optical Network. In addition, we have a complete line of tunable lasers assemblies and sub-assemblies in our Agile Transmission Module family. JDSU Electrostatic MEMS Variable Optical Attenuators (ESVOA) focus on key network optical power management applications. JDSU offers ESVOA series attenuators in normally open and normally closed states. ESVOA series attenuators fully comply with the Telcordia 1221 reliability program. Key features include a small size, low wavelength dependent loss (WDL), and high reliability. The ESVOA series attenuator achieves highly repeatable optical attenuation over C and/or L bands using an electrostatic rotatable mirror. Applied voltage/power actuates the mirror to rotate, changing the light coupling between the input fiber and the output fiber of the ESVOA series attenuator. Key Features Low insertion loss Low wavelength dependent loss Low polarization dependent loss Multiple devices easily packaged into common housing Applications Power equalization in multi-channel, optically amplified networks Gain-tilt control in erbium doped fiber amplifiers (EDFAs) Power control in narrowband wavelength division multiplexers (WDMs) and configurable networks Photoreceiver trimming Receiver protection/switch during transmitter turn-ons Compliance Telcordia 1209 and 1221 >>>
    View the product on jdsu.com/ Jds Uniphase
    ACU50 ANTENNA COUPLING

    ACU50 ANTENNA COUPLING
    Fully Automatic Tuning Fast Tuning Time Single cable connection to transmitter Designed for Shipborne Installation Built-in Self Diagnosis 99 Channel Memory for pre-set tuning settings Low through life costs Integral protection circuits The ACU50 is part of the Redifon MEL Limited range of Antenna Coupler Units covering a broad spectrum of land and naval based communications applications, providing efficient transmit operation with a range of antenna types. The unit is designed for ease of use and maintenance by using microprocessor control to optimise operating performance and to facilitate fault diagnosis. Using a modular design approach, the Antenna Coupling Unit can be maintained through modular replacement, minimising unit downtime. The ACU50 is a 1kW fully automatic HF Antenna Coupling Unit designed to operate with 10m whips over the frequency range 1.5MHz to 30MHz, for shipborne and land based installations. For shipborne installation, the ACU50 is mounted in a rugged weatherproof enclosure and is designed to meet NES1004 naval exposed environment standards. A single coaxial cable provides RF, power and serial control data to the unit. Technical Specifications General Operating Frequency HF 1.5 – 30 MHz. Size Height: 805mm Width: 411mm Depth: 341mm Power Rating 1kW, 100% duty cycle Weight 53 kg. Power Supply 28V DC Environment Temperature: -40°C to +55°C Relative Humidity: to 95% at 45°C Typical Antenna Matching 10m Whips Remote Location Distance 150 metres ANTENNA COUPLER UNITS FOR MF (240 – 550KhZ) APPLICATIONS, ALSO AVAILABLE:- Preset Tuning Time >>>
    View the product on thales-communications.ltd.uk/signature_management.htm THALES JOINT SYSTEMS
    FEATURED PRODUCT AMPLIFIERS LMH1981

    FEATURED PRODUCT AMPLIFIERS LMH1981
    The LMH1981 is a high performance multi-format sync separator ideal for use in a wide range of video applications, such as broadcast and professional video equipment and HDTV/DTV systems. The input accepts standard analog video signals with either bi-level or tri-level sync, and the outputs provide all of the critical timing signals in CMOS logic, including composite, horizontal, and vertical syncs, burst/back porch timing, odd/even field, and video format outputs. >>>
    View the product on xignal.com Xignal Technologies
    FLASHLAMP DRIVER PS5010 FOR PULSED LASERS

    FLASHLAMP DRIVER PS5010 FOR PULSED LASERS
    PS5010 model is no longer produced and has been replaced with an updated model - PS5050. Features: Output power up to 2800 J/s Output voltage regulation better than ± 0.1 % Output voltage up to 2000 V Pulse repetition rate up to 150 Hz Pulse energy from 5 to 1000 J Full front panel and/or remote control operation Single phase mains Power factor correction (optional) FLASHLAMP DRIVER PS5010 is designed for flashlamp-pumped lasers and comprises one or several charging modules, a discharge and simmer module and control circuit. Such design allows the unit to be operated with the utmost ease and convenience. The unit is fitted into a 19" standard housing and may be comfortably mounted into your power supply stands. The unit is manufactured in conformity with EN61010 and EN55011 standards. Specifications Maximum charge rate up to 2800 J/s Capacitance of capacitors bank up to 500 µF Adjustment range of output voltage 300–2000 V Output voltage regulation ± 0.1% Simmer current 0.6 A Synchronisation internal/external Pulse repetition rate up to 150 Hz Discharge pulse delay adjusting range 100–500 µs Mains supply 198–242 VAC single phase, 50/60 Hz or 380–450 VAC three phases, 50/60 Hz Average power consumption < 3.7 kW Size 19" × 7" front panel, 460 mm (D) × 440 mm (W) case Weight up to 32 kg Efficiency of charging modules > 0.9 >>>
    View the product on ekspla.com/en Ekspla Groupe - Eksma
    RF ATTENUATOR TEST SET - MF-130D

    RF ATTENUATOR TEST SET - MF-130D
    The RF Attenuation Meter MF-130D was designed to simplify the checking of the performance of a shielded enclosure. DescriptionWith the possibility of generating eight frequencies, the engineer is able to check the shielding effectiveness very quickly. The measurement can be done at four frequencies: 8 MHz, 16 MHz, 32 MHz and 64 MHz. The measurements can be performed according to the following standards: MIL-STD-285 NSA 65-6 IEEE STD-299 MF-130D consists of portable, NiCd battery operated transmitter and receiver. Frequency and attenuation calibration is automatically operated by a microprocessor. The receiver is equipped with an LCD-display which shows the attenuation in dB at the normal operational mode. An alarm sound is heard when the attenuation is less than the selected level at the preset limit mode. Saving and downloading the measured data You can save 63 attenuation levels at each frequency. You can download these saved values to a computer through a serial (RS-232) connection. The MF-130D Attenuation Meter set is provided with two diskettes. These diskettes are for downloading the measuring information into a computer. One diskette is for a Windows 3.1x operating system and the other is for a Windows 95 operating system. Measuring magnetic attenuation according to NSA 65-6 / IEEE STD-299: Place the receiver and the transmitter as shown in the figure above at the point to be measured with the receiver inside the enclosure and the transmitter outside. The attenuation value may now be read from the meter. Measuring magnetic attenuation according to MIL-STD-285: Place the receiver and the transmitter as shown in the figure above. Turn the antenna of the receiver and the transmitter to find out the minimum attenuation reading. >>>
    View the product on ets-lindgren.co.uk Ets Lindgren
    HANVOX+ VOICE ANNOUNCEMENT

    HANVOX+ VOICE ANNOUNCEMENT
    Hanvox+ is an integrated voice announcement and amplifier system. Voice messages are stored on plug-in 'SD' cards, offering a compact and reliable form of data storage. Dimensions in mm: 255x190x65 Hanvox+ has two built-in 20 Watt amplifiers, or it can be connected directly to an existing PA system. The unit can be driven by a Hanover Controller, Eric, or other on-board equipment. Features Automatic volume control, the ambient noise level can be measured and the volume of Hanvox+ messages adjusted accordingly. Hanvox+ can control announcements in two internal zones (eg. upper and lower decks) and one external zone. The external zone speaker allows messages, such as service number and destination, to be announced at bus stops for the benefit of blind or partially-sighted passengers. Optional drivers microphone input. >>>
    View the product on hanoverdisplays.com Hanover Display Ltd
    IC-NE LIGHT GRID PULSE RECEIVER

    IC-NE LIGHT GRID PULSE RECEIVER
    Applications: * Light curtains * Light barriers * Electro-sensitive protective equipment (ESPE) Features: * Photoelectric amplifier adapted to standard photodiodes * Built-in band-pass filter with 300 kHz center frequency * Differential current-signal output * Wide dynamic range of 100 nA to 1.5 mA for pulsed photocurrents * Three stage shift register and control logic * Compatible with CMOS levels * Low standby current * Power-down reset * ESD protection * Suited for high-risk applications according to IEC 1496-1 >>>
    View the product on ichaus.com iC-Haus
    BROADBAND DIGITAL STEP ATTENUATORS (DSAS)

    BROADBAND DIGITAL STEP ATTENUATORS (DSAS)
    Peregrine's highly linear, monolithic RF DSA family offers a selection of resolutions, minimum attenuation step sizes and termination impedances. Its UltraCMOS™ foundation allows for a unique initial attenuation state at power-up and a standard programming sequence and footprint across the 5 and 6 bit family. The DSA line provides industry-leading linearity over frequency and temperature, a versatile parallel or serial CMOS control interface, and operates on a single 3-volt supply, making it ideal for applications such as wireless base station, fixed wireless, microwave, VSAT, broadband telecom, military, space, test instrumentation, and optical equipment. >>>
    View the product on peregrine-semi.com Peregrine Semiconductor
    2 – 15 WATT CW FIBER LASER MODULE

    2 – 15 WATT CW FIBER LASER MODULE
    The Nufern Series of 2–15 W CW Ytterbium Fiber Laser Modules are designed as highly reliable robust sources that can be readily integrated into OEM applications for industrial and manufacturing environments. The modular system includes a fully tested CW fiber laser cavity and a number of available options for integrating long-life pump diodes. The flexible design allows the integrator to choose from any number of diode sources, or Nufern can provide a system where the diodes are pre-packaged and spliced direct from the factory. >>>
    View the product on nufern.com Nufern
    COUPLERS 3DB TOPWALL

    COUPLERS 3DB TOPWALL
    Micro Metalsmiths manufactures a range of waveguide hybrid couplers as standard items. Hybrid couplers are available in either sidewall or topwall topologies. They typically have 10% bandwidth, and are available in waveguide sizes WG6 to WG22 (WR650 to WR28). 3 dB power splits are provided as standard, but different power splits (such as 6 dB or 10 dB) can be provided upon request. They are available with either flanges or sockets and in either aluminum or brass. >>>
    View the product on micrometalsmiths.com Micro Metalsmiths
    DIELECTRIC RESONATORS COAXIAL TYPE(TEM MODE 400MHZ~4GHZ)

    DIELECTRIC RESONATORS COAXIAL TYPE(TEM MODE 400MHZ~4GHZ)
    Applications: Wireless equipment,voltage controlled oscillators (VCO) Cordless phones,Filters and diplexers,microwave circuits Dielectric Resonator Oscillators Signal isolator/blocker/jammer for Wifi,bluetooth,wlan GPS,GSM,celluar phone,mobile phone Features: Q range :200 - 1000 Temperature stability ˇŔ10ppm/ ˇć Available 2mm ~ 12mm 1/4 and 1/2 wavelength design Dielectric constant : 21 ¨C 90 Surface or tab mounting Easy handling and assembly Custom design available Dimension: 2mm , 3mm , 4mm , 5mm , 6mm , 8mm , 10mm and 12mm Specification: Ceramic resonators coaxial type.pdf(78.7Kb) DR60(500).pdf(106K) 500Mhz 6mm DR50(750).pdf (94.9k) 750Mhz 5mm DR30(1000).pdf (94.5k) 1000Mhz 3mm DR40(1100).pdf (95.6k) 1100Mhz 4mm DR60(1200).pdf (96.9k) 1200Mhz 6mm DR30(1300).pdf(111k) 1300Mhz 3mm DR80(1500).pdf (95.7k) 1500Mhz 8mm DR40(2450).pdf (88.3k) 2450Mhz 4mm A dielectric resonator is an electronic component that exhibits resonance for a narrow range of frequencies, generally in the microwave band. Resonators are important components in microwave communication circuits. Resonators are useful in RF communication equipment in connection with filters, low noise oscillators, and other circuits. Ceramic coaxial resonators with high Q and very good temperature stability are perfectly suitable for voltage controlled oscillators and bandpass filters and duplexers. Smaller resonators can be used at higher frequencies.Larger resonators can provide greater Q factor. >>>
    View the product on accutemicro.com Accute Micro Electronics Co.,Ltd
    HARMONIC AND FLICKER ANALYZER AC2000 FHT25

    HARMONIC AND FLICKER ANALYZER AC2000 FHT25
    The Harmonic and Flicker Analyzer is an easy-to-use mains and harmonics analyzer that features a full graphical display, does continuous real-time analysis of both voltage and current. As a general purpose mains analyzer, it can measure Watts, VA Vrms, Vpk, Arms, Apk, Crest factors, THD, Power factor, Frequency and Inrush current. The analyzer.s large display can show multiple parameters simultaneously, as well as graphical representations of voltage and current waveforms. >>>
    View the product on credencetech.com Credence Technologies
    LASER PICOREGEN™ SERIES

    LASER PICOREGEN™ SERIES
    All-In-One Picosecond Oscillator / Amplifier System * 1047 - 1064 nm, down to 8 ps, up to 3 mJ, up to 500 kHz, up to 10 W * Highest pulse energies at low repetition rates or at single pulse operation * Integrated picoTRAIN™ seed laser with semiconductor saturable absorber modelocking (SESAM) * All-dioded-pumped solid state technology * Compact and modular set-up * TEMoo beam profile * High temporal and spatial stability * Single phase power supply * Air-cooled closed-loop chiller (included) Please ask for * NEW: Picosecond OPA: Tunable output from 200nm to 3000nm * Frequency conversion: SHG, THG, FHG * Different laser materials, e.g. Nd:YLF * Different pulse durations up to 150 ps * Pulse Picker >>>
    View the product on highqlaser.at High Q Laser Production
    ATTENUATOR FUSED FIBER

    ATTENUATOR FUSED FIBER
    The JDSU fused fiber attenuator is a compact, fused component that decreases optical power in telecommunications equipment, passive telephony, or cable television (CATV) networks and test equipment. JDSU proprietary manufacturing technology provides high performance parts that are optimized to the required operating wavelength, narrowband, or broadband - along with low polarization and temperature dependence. Regular parts are available in a wide variety of operating wavelengths, tap ratios, fiber types, housing and connector options. Our extensive selection enables rapid design cycles and new project builds. Key Features Environmentally stable High performance Broadband coverage Compact size Custom parts available Applications Power management in optical networks Wavelength division multiplexing (WDM) system channel balancing Receiver protection Test equipment >>>
    View the product on jdsu.com/ Jds Uniphase
    3DB TOPWALL

    3DB TOPWALL
    Micro Metalsmiths manufactures a range of waveguide hybrid couplers as standard items. Hybrid couplers are available in either sidewall or topwall topologies. They typically have 10% bandwidth, and are available in waveguide sizes WG6 to WG22 (WR650 to WR28). 3 dB power splits are provided as standard, but different power splits (such as 6 dB or 10 dB) can be provided upon request. They are available with either flanges or sockets and in either aluminum or brass. >>>
    View the product on micrometalsmiths.com MICRO METALSMITHS LTD
    PA8100 POWER AMPLIFIER

    PA8100 POWER AMPLIFIER
    • High reliability • Very low noise performance • Rugged, modular design incorporating MOSFET technology • Available as 1kW or 500W versions • Ideally suited to Naval cosite environment • Service information available via diagnostic port • Easy access for maintenance and servicing • Small size and low weight characteristics The PA8100 series power amplifier incorporates high linearity MOSFET technology, providing a rugged design available in 1kW and 500W versions. The amplifier design offers excellent linearity at lower power levels, making the PA8100 ideally suited to modern data waveform requirements. Band pass filtering within the design and a low wideband noise floor result in a design optimised for the Naval environment. The use of combined amplifiers allows the PA8100 to continue to operate, at a reduced power, in the unlikely event component failure. Diagnostics and service information is available via an Ethernet port on the front panel. A standard laptop or PC with our LCT8100 Software, can be used to interrogate the unit. Maintenance can be facilitated without the need to remove the entire installation. Individual modules can be removed from the front panel. GENERAL CHARACTERISTICS MTBF: 10,000hrs MIL-MDBK-217F NS @ 25°C Frequency range: 1.5 MHz to 30 MHz RF output power: 1 kW Amplifier: 1 kW ± 1 dB into 650 W into 2:1 VSWR 500 W Amplifier: 500 W ± 1 dB into 325 W into 2:1 VSWR Power Reduction: Down to 1 W in 1 dB steps Harmonics: 38 dB below PEP ((typically >46dB) Inter-transmitter intermodulation With 30 dB coupling between two products: transmitters, third order inter-transmitter intermodulation products are >>>
    View the product on thales-communications.ltd.uk/signature_management.htm THALES JOINT SYSTEMS
    HIGH SPEED VIDEO SOLUTIONS AMPLIFIERS

    HIGH SPEED VIDEO SOLUTIONS AMPLIFIERS
    National has recognized the ever-increasing need for higher video resolutions by offering a variety of high-performance video products to fit virtually every market and application. National's patented VIP10 process technology and current feedback topology enable the development of products with the widest bandwidths, lowest distortion, and lowest crosstalk specifications in the semiconductor industry. >>>
    View the product on xignal.com Xignal Technologies
    2 WATT 1 µM SINGLE FREQUENCY PM FIBER AMPLIFIER

    2 WATT 1 µM SINGLE FREQUENCY PM FIBER AMPLIFIER
    The Nufern NuAMP SF series of high power, polarization maintaining fiber amplifiers are specifically designed to operate in conjunction with ultra narrow linewidth, single frequency seed lasers based on distributed feedback (DFB) fiber lasers or solid state technologies. Capable of amplifying low power input signals with kHz linewidth to 2, 5, and 10 W of power, these monolithic amplifiers use large mode area fiber technology to overcome non-linearities such as stimulated Brillouin scattering (SBS) and maintain critical seed laser characteristics such as narrow linewidth and relative intensity noise (RIN). The NuAMP SF series includes input isolation (>30 dB) and input/output interlocks to prevent system failure and to protect the seed source (response time of < 10 µsec). >>>
    View the product on nufern.com Nufern
    WAVEGUIDE DIPLEXER

    WAVEGUIDE DIPLEXER
    Micro Metalsmiths' range of waveguide diplexers are available for all point to point and point to multipoint applications from 13 to 40 GHz.The diplexers are manufactured using either precision machining or Micro Metalsmiths' MM precision casting process.# 13 to 40 GHz in waveguide sizes WR62 to WR22.# For lower volume requirements and all WR62 and WR51 requirements the diplexers are precision machined.# For high volume WR42, WR34 & WR28 requirements Micro Metalsmiths precision casting process is used.# Cast diplexers require no tuning screws and are light weight – less than a third of the precision machined version.# Micro Metalsmiths can develop a diplexer as a precision machined item, and convert it to cast version at a later date.# Diplexers are supplied with standard waveguide flange interfaces >>>
    View the product on micrometalsmiths.com Micro Metalsmiths
    20 – 50 WATT CW FIBER LASER MODULE

    20 – 50 WATT CW FIBER LASER MODULE
    The Nufern Series of 20–50 W CW Ytterbium Fiber Laser Modules are designed as highly reliable robust sources that can be readily integrated into OEM applications for industrial and manufacturing environments. The modular system includes a fully tested CW fiber laser cavity and a number of available options for integrating long-life pump diodes. The flexible design allows the integrator to choose from any number of diode sources, or Nufern can provide a system where the diodes are pre-packaged and spliced direct from the factory. >>>
    View the product on nufern.com Nufern




      Search    
     
     
     
    Search
    See all of the sector's products : Electricity/Electronics