Quenching equipment: suppliers, wholesalers and manufacturers on Hellopro
Search   


Quenching equipment :

16 products
Select the category
    Selection of 16 products among 16
    QUENCHING MACHINES - 529/537

    QUENCHING MACHINES - 529/537
    529/537 Quenching Machines The Gleason No. 529 Quenching Machine (Manual) and the No. 529 Process Controlled Quenching. Machine (PCM) are designed primarily for rapid production quenching of automotive ring gears and other round, flat or cylindrical parts up to 10.5" (266 mm) diameter and 4" (102 mm) high. These machines offer complete control of the quenching operation, and a host of user benefits, including: • Reduced setup/changeover time. The PLC has the capability of storing setup data for 96 parts. >>>
    View the product on mmprecision.com M&M Precision Systems
    ELECTRONIC IGNITION TRANSFORMER - D-HG 55

    ELECTRONIC IGNITION TRANSFORMER - D-HG 55
    The D-HG 55 electronic ignition transformer is suitable for the ignition of gases and liquid fuels in small burners Features Ignition of oil and gas High-performance and reliable ignition Simple to use and installion Robust enclosure for industrial use 100 ignition sparks/second with a mains frequency of 50Hz, 120 ignition sparks/second with a mains frequency of 60Hz Suitable as "Ignitor Class 3 Special“ in accordance with NFPA 8501 and NFPA 8502 Applications Chemical industry Refineries Cement plants Waste incinerators Steam generators Heating plants Power supply 115 / 230 VAC, 50 / 60 Hz Power consumption 15 VA Ignition voltage 5000 V Power-on time 50% Perm. ambient temperature -20 … +60°C Protection IP 65 Dimensions 100 x 100 x 80 mm (LxWxD) (without ignition electrode) Weight approx. 0.7 kg >>>
    View the product on durag.de DURAG Groupe - Schaumann
    HEATLINE

    HEATLINE
    HeatLine is EFD Induction’s family of systems for melting and forging applications. A comprehensive range, HeatLine systems feature serial and/or parallel compensated induction power sources for a wide range of output powers and frequencies. HeatLine’s serial technology is built around robust, high-uptime IGBT transistors. Our parallel technology features thyristor, IGBT and MOSFET components. Each HeatLine converter offers automatic load matching, a single microprocessor-based control board and integrated capacitors. In addition to systems for melting and forging, HeatLine offers solutions for graphite coating, wire and strip heating, spring wire rolling, glass melting, graphite susceptor heating, galvanizing, food and chemical vessel heating, and other special applications. >>>
    View the product on efd-induction.com CFEI EFD
    CONVECTOR HEATERS

    CONVECTOR HEATERS
    Convector heaters Category Electrical appliances Product name Convector heaters Brand IGENIX Product description Metal-cased electric convector heaters, three separate models. Type/number of model: - Igenix IG5100 / 5016368010655 - Igenix IG5500 / 5016368010662 - Igenix IG5550 / 5016368012697 Country of origin China Picture Risk type Fire Risk description The product poses a risk of fire. Twelve incidents have been reported. Affected Products Affected products do not have a batch code. If the product displays the batch code 500907, they are unaffected by this voluntary recall. Instructions Voluntary recall from the consumers by the distributor. >>>
    View the product on electricalsafetycouncil.org.uk Electrical Safety Council
    ELECTRONIC IGNITION TRANSFORMER - D-HG 55

    ELECTRONIC IGNITION TRANSFORMER - D-HG 55
    The D-HG 55 electronic ignition transformer is suitable for the ignition of gases and liquid fuels in small burners Features Ignition of oil and gas High-performance and reliable ignition Simple to use and installion Robust enclosure for industrial use 100 ignition sparks/second with a mains frequency of 50Hz, 120 ignition sparks/second with a mains frequency of 60Hz Suitable as "Ignitor Class 3 Special“ in accordance with NFPA 8501 and NFPA 8502 Applications Chemical industry Refineries Cement plants Waste incinerators Steam generators Heating plants Power supply 115 / 230 VAC, 50 / 60 Hz Power consumption 15 VA Ignition voltage 5000 V Power-on time 50% Perm. ambient temperature -20 … +60°C Protection IP 65 Dimensions 100 x 100 x 80 mm (LxWxD) (without ignition electrode) Weight approx. 0.7 kg >>>
    View the product on durag.de DURAG Groupe - Schaumann
    MINAC

    MINAC
    The Minac range of complete mobile induction systems is even easier to use than its acclaimed predecessor. A ready-to-use system, all that has to be done upon delivery is: 1) attach a coil, 2) connect supply voltage, 3) connect cooling water. In models with closed cooling systems, only the supply voltage needs connecting. Once installed, the Minac's clear, menu-based and multi-language control panel ensures maximum ease-of-use. Moreover, this simplified control/user interface is common to all Minac equipment. Many Minac models come in "Twin" versions offering two independent power outputs. The Twin versions feature split control panel displays—one for each power output. The Minac is simple to operate. Handheld transformers (HHT) feature on/off and precise power controls. In fact, the HHT is as easy to operate as a regular electric drill. Flexible, water-cooled cables connecting the HHT to the converter allow easy access to workpieces. >>>
    View the product on efd-induction.com CFEI EFD
    HIGH ENERGY IGNITION DEVICE - D-HG 1600

    HIGH ENERGY IGNITION DEVICE - D-HG 1600
    The D-HG 1600 high energy ignition device is suitable for the ignition of gas or liquid fuels in industrial burners of any capacity Features Ignition of liquid or gaseous fuels at high capacities Ignites even heavy oil no. 6 Special designs for potentially explosive atmospheres are available No wear because thyristor controlled Ignition feedback signal via LED or potential-free relay output 4 ignition sparks á 16J per second Suitable as "Ignitor Class 3 Special“ in accordance with NFPA 8501 and NFPA 8502 Applications Chemical industry Refineries Cement plants Waste incinerators Steam generators Heating plants Power supply 115 / 230 VAC, 50 / 60Hz Power consumption 250 VA Ignition voltage / - energy 1800 V / 16 J Power-on time 300 s (ESD 50%) Perm. ambient temperature -30 … +60°C Protection D-HG 1600-P/-CG: IP 65 D-HG 1600 Ex IIB/IIC: IP55 Installation wall mounting Dimensions 200 x 300 x 170 mm (LxWxH) Schaltleistung 250 VAC / 4A Display LED Max. temperature 600°C permanent of ignition tip 800°C for short period (max. 2 min) Operation life of the ignition tip 106 sparks Ignition frequency 4 sparks/s Weight approx. D-HG 1600-P: 8.3 kg D-HG 1600-CG: 8.3 kg D-HG 1600 EEx IIC: 27.0 kg D-HG 1600 EEx IIC: 33.0 kg D-ZL 4…: 1.6 kg/m >>>
    View the product on durag.de DURAG Groupe - Schaumann
    WELDAC

    WELDAC
    The Weldac is EFD Induction's family of high-output solid-state welders based on rugged, reliable IGBT transistor inverters. A complete system, the Weldac consists of a frequency converter, output matching section, busbar, external control system and coil connection. The Weldac system is available in two basic designs: single-cabinet for welders up to 600 kW; double-cabinet for welders up to 2,000 kW. Weldac is a proven solution for welding stainless steel, aluminum, low-carbon steel and high-strength steel. Modular design with independent IGBT inverters makes Weldac compact, saving valuable floor space and simplifying in-line integration and retrofitting. The Weldac system can be fitted with induction coils or contact welding heads. >>>
    View the product on efd-induction.com CFEI EFD
    HIGH ENERGY IGNITION DEVICE - D-HG 1600

    HIGH ENERGY IGNITION DEVICE - D-HG 1600
    The D-HG 1600 high energy ignition device is suitable for the ignition of gas or liquid fuels in industrial burners of any capacity Features Ignition of liquid or gaseous fuels at high capacities Ignites even heavy oil no. 6 Special designs for potentially explosive atmospheres are available No wear because thyristor controlled Ignition feedback signal via LED or potential-free relay output 4 ignition sparks á 16J per second Suitable as "Ignitor Class 3 Special“ in accordance with NFPA 8501 and NFPA 8502 Applications Chemical industry Refineries Cement plants Waste incinerators Steam generators Heating plants Power supply 115 / 230 VAC, 50 / 60Hz Power consumption 250 VA Ignition voltage / - energy 1800 V / 16 J Power-on time 300 s (ESD 50%) Perm. ambient temperature -30 … +60°C Protection D-HG 1600-P/-CG: IP 65 D-HG 1600 Ex IIB/IIC: IP55 Installation wall mounting Dimensions 200 x 300 x 170 mm (LxWxH) Schaltleistung 250 VAC / 4A Display LED Max. temperature 600°C permanent of ignition tip 800°C for short period (max. 2 min) Operation life of the ignition tip 106 sparks Ignition frequency 4 sparks/s Weight approx. D-HG 1600-P: 8.3 kg D-HG 1600-CG: 8.3 kg D-HG 1600 EEx IIC: 27.0 kg D-HG 1600 EEx IIC: 33.0 kg D-ZL 4…: 1.6 kg/m >>>
    View the product on durag.de DURAG Groupe - Schaumann
    HIGH ENERGY IGNITION DEVICE - D-HG 400

    HIGH ENERGY IGNITION DEVICE - D-HG 400
    The D-HG 400 high energy ignition device is suitable for the ignition of gas or liquid fuels in industrial burners of any capacity Features Ignition of liquid or gaseous fuels with large power ratings Compact design: control unit and ignition lance form one unit Ignites even heavy oil no. 6 Special designs for potentially explosive atmospheres are available Special design with battery operation Special design for swivelling burner No wear because thyristor controlled 20 ignition sparks á 4.5 J per second Ignition feedback signal via integrated LED or potential-free relay output Suitable as "Ignitor Class 3 Special“ in accordance with NFPA 8501 and NFPA 8502 Applications Chemical industry Refineries Cement plants Waste incinerators Steam generators Heating plants Power supply 115 / 230 VAC, 50 / 60 Hz or 24 / 48 VDC Power consumption 220 VA Zündspannung/ -energie 1500 V / 4.5 J Power-on time 300 s (ESD 50%) Perm. ambient temperature -20…+60°C Protection IP 54 Switching performance 250 VAC / 4A Display LED Max. temperature of the ignition tip 600°C permanent 800°C for a short period (max. 10 min.) Operational life of the ignition tip 106 sparks Ignition frequency 20 sparks/s for 1 min, 5 sparks/s thereafter Dimensions 108 x 188 x 237 mm (LxWxH) Weight (approx.) D-HG 400-50 with 3 m lance: 9.0 kg D-HG 400-65: 4.5 kg D-HG 400-53 Ex: 40.0 kg D-HG 400-72 Ex: 13.0 kg D-HG 400-80: 9.0 kg D-HG 400-81: 11.0 kg D-HG 400-90 with 3 m lance: 9.0 kg D-ZL 4…: 1.6 kg/m >>>
    View the product on durag.de DURAG Groupe - Schaumann
    HIGH ENERGY IGNITION DEVICE - D-HG 400

    HIGH ENERGY IGNITION DEVICE - D-HG 400
    The D-HG 400 high energy ignition device is suitable for the ignition of gas or liquid fuels in industrial burners of any capacity Features Ignition of liquid or gaseous fuels with large power ratings Compact design: control unit and ignition lance form one unit Ignites even heavy oil no. 6 Special designs for potentially explosive atmospheres are available Special design with battery operation Special design for swivelling burner No wear because thyristor controlled 20 ignition sparks á 4.5 J per second Ignition feedback signal via integrated LED or potential-free relay output Suitable as "Ignitor Class 3 Special“ in accordance with NFPA 8501 and NFPA 8502 Applications Chemical industry Refineries Cement plants Waste incinerators Steam generators Heating plants Power supply 115 / 230 VAC, 50 / 60 Hz or 24 / 48 VDC Power consumption 220 VA Zündspannung/ -energie 1500 V / 4.5 J Power-on time 300 s (ESD 50%) Perm. ambient temperature -20…+60°C Protection IP 54 Switching performance 250 VAC / 4A Display LED Max. temperature of the ignition tip 600°C permanent 800°C for a short period (max. 10 min.) Operational life of the ignition tip 106 sparks Ignition frequency 20 sparks/s for 1 min, 5 sparks/s thereafter Dimensions 108 x 188 x 237 mm (LxWxH) Weight (approx.) D-HG 400-50 with 3 m lance: 9.0 kg D-HG 400-65: 4.5 kg D-HG 400-53 Ex: 40.0 kg D-HG 400-72 Ex: 13.0 kg D-HG 400-80: 9.0 kg D-HG 400-81: 11.0 kg D-HG 400-90 with 3 m lance: 9.0 kg D-ZL 4…: 1.6 kg/m >>>
    View the product on durag.de DURAG Groupe - Schaumann
    IGNITION LANCES

    IGNITION LANCES
    Connection to ignition devices for the ignition of gas or liquid fuels in industrial burners of any capacity Features Ignition tip temperature-proof up to 600°C, up to 800°C for a short period High-temperature model temperature-proof up to 1000°C For use with D-HG 400 and D-HG 1600 ignition devices Applications Chemical industry Refineries Cement plants Waste incinerators Steam generators Heating plants Claus plants >>>
    View the product on durag.de DURAG Groupe - Schaumann
    IGNITION LANCES

    IGNITION LANCES
    Connection to ignition devices for the ignition of gas or liquid fuels in industrial burners of any capacity Features Ignition tip temperature-proof up to 600°C, up to 800°C for a short period High-temperature model temperature-proof up to 1000°C For use with D-HG 400 and D-HG 1600 ignition devices Applications Chemical industry Refineries Cement plants Waste incinerators Steam generators Heating plants Claus plants >>>
    View the product on durag.de DURAG Groupe - Schaumann
    PNEUMATIC RETRACTION UNIT D-VE 500

    PNEUMATIC RETRACTION UNIT D-VE 500
    Features Automatic insertion and retraction of ignition lances Compressed air drive Direction change with solenoid valve Speed control Non-contact limit switch For use with ignition deviceses D-HG 400-50 and rigid ignition lances D-ZL... Available stroke lengths: 300, 400, 500 and 600 mm Pressure-tight and/or explosion protected Models also available Operational overpressure up to 10 bar Applications Chemical industry Refineries Cement plants Waste incinerators Steam generators Heating plants Max. perm operation overpressure 10 bar Max. ambient temperature -5…+50°C Sheer force at 6 bar 1870 N Retraction force at 6 bar 1682 N Weight (approx.) 300 mm stroke: 9,0 kg 400 mm stroke: 11,0 kg 500 mm stroke: 12,5 kg 600 mm stroke: 14,0 kg Electric control 24/48 VDC or 115/230 VAC Protection IP 65 Display LED Ex- protection limit switch NAMUR (optional) II 2 G EEx ia IIC T4…T6 Ex-solenoid valve (optional) II 2 GD EEx m II T5 >>>
    View the product on durag.de DURAG Groupe - Schaumann
    PNEUMATIC RETRACTION UNIT D-VE 500

    PNEUMATIC RETRACTION UNIT D-VE 500
    Features Automatic insertion and retraction of ignition lances Compressed air drive Direction change with solenoid valve Speed control Non-contact limit switch For use with ignition deviceses D-HG 400-50 and rigid ignition lances D-ZL... Available stroke lengths: 300, 400, 500 and 600 mm Pressure-tight and/or explosion protected Models also available Operational overpressure up to 10 bar Applications Chemical industry Refineries Cement plants Waste incinerators Steam generators Heating plants Max. perm operation overpressure 10 bar Max. ambient temperature -5…+50°C Sheer force at 6 bar 1870 N Retraction force at 6 bar 1682 N Weight (approx.) 300 mm stroke: 9,0 kg 400 mm stroke: 11,0 kg 500 mm stroke: 12,5 kg 600 mm stroke: 14,0 kg Electric control 24/48 VDC or 115/230 VAC Protection IP 65 Display LED Ex- protection limit switch NAMUR (optional) II 2 G EEx ia IIC T4…T6 Ex-solenoid valve (optional) II 2 GD EEx m II T5 >>>
    View the product on durag.de DURAG Groupe - Schaumann




      Search    
     
     
     
    Search
    See all of the sector's products : Manufacturing and processes