Protection equipment: suppliers, wholesalers and manufacturers on Hellopro
Search   


Protection equipment :

772 products
Select the category
    Selection of 63 products among 772
    ANGLE SENSOR, CONTACTLESS RSC2800

    ANGLE SENSOR, CONTACTLESS RSC2800
    Description The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. Therefore, a magnet is attached to the sensor shaft, the magnetic field orientation is captured with an integrated circuit. An analogue output signal represents the calculated angle. The housing is made of a special highgrade temperature-resistant plastic material. Fixings are in the form of elongated slots which allow simplicity in mounting together with ease of mechanical adjustment. The special backlash-free push-on coupling ensures extremely quick and simple installation. The transducer is not sensitive to either dirt or dampness. Electrical connections are made via a shielded cable with 3 lead wires which is sealed into the housing. -------------------------------------------------------------------------------- Special features - non-contacting, magnetic - electrical range 30° up to 180° in 10°-steps - available with push-on coupling or marked shaft - simple mounting - protection class IP54 or IP65 - long life - 5 V-variant fullfills e1-standard - internal resolution 13 Bit - independent linearity ± 0,5% >>>
    View the product on novotechnik.de NOVOTECHNIK
    HIGH VOLTAGE RELAYS - DELAYED OPEN/CLOSED - E40-NC-40-1-ZA

    HIGH VOLTAGE RELAYS - DELAYED OPEN/CLOSED - E40-NC-40-1-ZA
    HIGH VOLTAGE RELAYS 1KV to 300KV 1mA to 600 amps High Voltage Delayed Open/Closed Relays High voltage relays with automatic delay but positive closing or opening after turn on, turn-off or loss of power. They are designed for safety shorting or current flow which must not be initiated or interrupted accidentally, before a prescribed time after actuation or shutdown. Typical E Series Delayed E40-NC-40-1-ZA 40KV PK Test 1-3 seconds delay to close >>>
    View the product on rossengineeringcorp.com Ross Engineering
    ATEX

    ATEX
    Citadel ATEX Zone 21 & 22 against dust explosions in dusty environments, especially for: bakeries, food processing industry, cement industry, coal industry Cast steel solutions for ATEX Zone 1 & 2 use, for flammable liquids, gases & vapour-sand Zone 21 & 22 for dust. EExd II B T6 (certified for gas groups IIA & IIB, temp. class T6) Standard switch ranges: 16A, 25A, 40A, 63A, 100A, 200A, 300A, 500A Hand operated, optionally: motor driven or both Customer built assemblies >>>
    View the product on santonswitchgear.com Santon Switchgear Ltd
    MIL-AERO SOLID STATE RELAYS - SERIES SR75-1

    MIL-AERO SOLID STATE RELAYS - SERIES SR75-1
    Series SR75-1: 1.5 Amp 300 Vdc Plastic SMT, THT, Short Circuit Protection The SR75-1 solid state relay utilizes a power FET switch that is protected against short circuit and overload currents. The short circuit protection feature not only provides protection should a short or overload occur while the relay is on, but will also provide protection should the relay be switched into a short. In either case, the relay will sense the short circuit condition and then block it indefinitely until the short is removed and the unit is reset by cycling the input control. Using the SR75-1 to switch power sources and loads can prevent fires, damage to system assemblies and system wiring. The power FET output offers low “ON” resistance and can switch loads in either the high or the low side of the power line. The SR75- 1 is packaged in a 16 pin DIP package with either surface mount or through hole mounting available. >>>
    View the product on teledynerelays.com Teledyne Relays Groupe - Teledyne Technologies Incorporated
    BASIC FIXED POWER QUALITY METER 7300

    BASIC FIXED POWER QUALITY METER 7300
    Overview Used in diverse applications from metering equipment and buildings, through monitoring the status of feeders, the ION 7300&trade offers unmatched value, functionality, and ease of use. The ION 7300 is an ideal replacement for a complete array of analog meters. It offers over one hundred 3-phase power, energy, demand, and harmonics measurements, an optional Ethernet port, and many space-saving configurations. Integrate the ION 7300 with our ION Enterprise&trade software or other automation systems for information-sharing among many departments and user groups. Summary Sampling rate 32/cycle Harmonics inc individuals up to 15th 4 digital outputs energy pulsing Single Rs485 comms Optional 4 channel analogue I/O Optional Ethernet 10B-T >>>
    View the product on cmatic.co.uk C-Matic Systems Ltd
    EARTHING BARRIER SYSTEM - 7700 SERIES

    EARTHING BARRIER SYSTEM - 7700 SERIES
    The latest range of barriers, the MTL7700 series, builds on the established MTL700 products that were introduced in 1982. Known for their quality and reliability, over 2 million MTL700 barriers are now in use throughout the world. The latest MTL7700 series features include: Removable terminals - for easy cabling Bussed power - reduces cabling Barrier protection module Proximity detector inputs - UNIQUE Dual channel modules Relay and solid state switch modules - UNIQUE >>>
    View the product on mtl-inst.com Measurement Technology Ltd
    FR PROFILE - ULTRA-THIN DIP ROTARY SWITCHE - FR01

    FR PROFILE - ULTRA-THIN DIP ROTARY SWITCHE - FR01
    Ultra-Thin DIP Rotary Switches -------------------------------------------------------------------------------- Environmentally friendly components and packaging materials meet RoHS directive restricting use of hazardous substances. Suited to lead-free solder processing applications because of heat resistant resin materials. Slim .150" (3.8mm) body has the lowest profile in the industry and allows close stacking of PC boards. Highly visible legends and choice of screwdriver or shaft actuators with arrow position indication provide trouble-free code setting. Actuator knob also available. Detent mechanism gives crisp, positive action for accurate switch setting. Use of heat resistant resin allows vapor phase and infrared convection reflow soldering. Crimped terminals for through-hole models ensure secure PC mounting and prevent dislodging during soldering. Gull-winged terminals for SMT models ensure mechanical stability during soldering and simplified solder joint inspection. Cam activated movable contact and gold contacts assure contact reliability and continuity. Tape Reel packaging meets EIA-481-2 Standard. Coplanarity tolerance zone is .0059" (0.15mm) maximum, the allowable distance between all considered surfaces in two parallel planes (for SMT models only) >>>
    View the product on nkk.com Nihon Kaiheiki Industry
    CONTROL CIRCUIT BREAKER - GB2

    CONTROL CIRCUIT BREAKER - GB2
    Designed especially for the protection of control circuits in industrial equipment having a magnetic tripping threshold in the order of 12 – 16 times the nominal rating.Ideal for withstanding the high transient peak currents encountered in the pull in of contactors, relays and solenoid valves, or the magenetising current of control transformers.Features:* Single pole, single pole and neutral or two pole devices* Compact - width 15mm per module* Ratings from 0.5A up to 20A 35mm DIN rail mounting* For a.c. operation up to 415V, d.c. up to 48V >>>
    View the product on schneider-electric.co.uk Telemecanique
    ASYMMETRIC CYCLER CRM-2H

    ASYMMETRIC CYCLER CRM-2H
    Cycler with independent adjustable switch ON/OFF it is used for regular room ventilation, cyclic dehumidifi cation, light control, circulating pumps, noon signs, etc. 2 time functions: 1) Cycler beginning with pulse 2) Cycler beginning with pause function choice is done by an external jumper of terminals S-A1 time scale 0.1 s - 100 days devided into 10 time ranges: (0.1 s - 1 s / 1 s - 10 s / 0.1 min - 1 min / 1 min - 10 min / 0.1 hrs - 1 h / 1 hrs - 10 hrs / 0.1 day - 1 day / 1 day - 10 days / 3 days - 30 days / 10 days - 100 days) rough time setting via rotary switch supply voltage: AC 230 V or AC/DC 12 - 240 V output contact: 1x changeover 16 A output indication: multifunction red LED 1-MODULE, DIN rail mounting >>>
    View the product on elkoep.com ELKO
    12-CHANNEL TRANSISTOR UNIVERSAL DIMMER

    12-CHANNEL TRANSISTOR UNIVERSAL DIMMER
    Polaron’s Universal 3 phase chokeless dimmer racks offer uncompromised adaptability for all load types. Universal dimmer racks auto detect the load type for each channel and dynamically provides either leading or trailing edge control An RS232 interface is built in to the racks as standard for easy system configuration and third party control. The racks also incorporate a fail-safe alarm input, which sends all lights to full when operated. An in-built timer allows for up to 200 system-wide timed events to be set per rack. FEATURES Rated at 20Amps per channel in leading or trailing edge operation Soft start to protect loads during switch-on 1-10v HFR fluorescent dimmable ballast control with mains relay per channel Separate switched output per channel Permanent supply for emergency luminaires per channel Easily accessible bypass switch per channel On board diagnostics with LED indication On board real time clock with event timer On board alarm input On board DMX input On board RS232 input On board Analogue control input DALI & DSI options available CE Approved >>>
    View the product on polaron.co.uk Engel & Gibbs Ltd
    MAGNETIC SWITCH - JSNY7

    MAGNETIC SWITCH - JSNY7
    The magnetic switch is designed to manage harsh environments and it is certified for the highest safety level (cat. 4 according to EN 954-1) when used together with a safety relay or safety PLC Pluto.Because the switch is small it is easy to install it and possible to conceal it entirely on hatches and gates. The magnetic switch has a long lifetime because it is not mechanically operated (non-contact switch). The magnetic switch has change over contacts. >>>
    View the product on jokabsafety.com Jokab Safety UK LTD
    AIR SUPPLY & EXHAUST

    AIR SUPPLY & EXHAUST
    Excellent pressure drop and sound characteristics. Suitable for commercial and domestic applications. Supplied complete with long body mounting rings. Easy to remove for cleaning. All models fully adjustable. Description Keeping noise and cost levels down to a minimum are probably the two biggest problems an engineer designing a ventilation system has to face today. The patented Model KSO Exhaust Valve has been developed with these criteria in mind and has a very low noise level even when the pressure drop across it is large. This characteristic allows relatively high air velocities to be used, permitting the selection of the most economical size of ductwork and exhaust valves. Adjustment of the airflow is simple, the inner cone being rotated to the required setting and locked in position with a single nut. Each air valve is supplied complete with a mounting ring from which it can be simply removed for cleaning without affecting the setting of the valve. >>>
    View the product on lindab.co.uk Lindab Limited (Building Products Division)
    2010 SMD RESISTOR

    2010 SMD RESISTOR
    0.6 Watt Wirewound Surface Mount Power FEATURES 1% Tolerance standard Smallest wirewound on the market Available in low ohmic values SPECIFICATIONS 25°C ambient Power: 0.6 watts Voltage (max.): 50V Tolerance: 1% Resistance range: 0.005O-1K Temperature Coefficient: 0.1O-1O: ±901O-10O: ±5010O+: ±20 Dielectric Withstanding Voltage: 1000V Tape Size: 12mm, 13" reel, 2500 pcs. per reel. >>>
    View the product on ohmite.com Ohmite


    < Début << Précedent 12
    Go to page


      Search    
     
     
     
    Search
    See all of the sector's products : Electricity/Electronics