Physical protection accessories: suppliers, wholesalers and manufacturers on Hellopro
Search   


Physical protection accessories :

272 products
Select the category
    Selection of 43 products among 272
    KEEGUARD® FALL PROTECTION SYSTEM

    KEEGUARD® FALL PROTECTION SYSTEM
    KeeGuard® Fall Protection System A Simple and Cost Effective Rooftop Railing System That Does Not Penetrate the Roof Membrane Integrated Safety Safety recommendations in countries all over the world are moving to a hierarchy of safety where collective fall prevention solutions, as provided by KeeGuard, are preferred over singular fall protection alternatives such as harnesses and wire systems. Simple and cost effective, the KeeGuard modular railing system is specifically designed for flat or low slope rooftops. KeeGuard prevents falls, ensures rooftop safety, and does not penetrate the roof membrane. The KeeGuard Roof Edge Fall Protection System can be used for retrofitting to older buildings as well as for new construction. Safety regulations for roof edge fall protection guardrails vary according to the country. KeeGuard has been tailored to meet and exceed the regulations for each country in which it is sold. >>>
    View the product on keeklamp.com Kee Klamp Ltd
    COVERS TO STOP VANDALISM CALL POINT STOPPER

    COVERS TO STOP VANDALISM CALL POINT STOPPER
    Protective cover to prevent malicious or accidental damage to electrical switches and call points. The Call Point Stopper is an aesthetic inexpensive cover which provides a secure fit to a wide range of electrical switches and call points. The cover prevents misuse to the device without restricting legitimate operation. It is ideal for shopping centres, hotels, schools, colleges, hospitals, nursing homes and all public buildings where there is a risk of malicious or accidental activation. >>>
    View the product on sti-europe.com Safety Technology International
    BODY BELTS - 1000004

    BODY BELTS - 1000004
    Canadian Model Number : 1000004C. Conforms to CSA Standards * Back D-ring for connection to restraint lanyard * 3" body pad for added comfort * Tongue buckle adjustment for fast & easy donning * Polyester webbing construction for added durability * Coated hardware for corrosion resistance * Meets or exceeds all applicable industry standards including OSHA and ANSI Use DBI-SALA's body belts for inspection work, construction and demolition, maintenance, oil production, and any other activities where you need to be restrained from a leading edge or where there is no possibility of a vertical free fall. Also, it is easy to add a body belt to most of our harnesses for added back support and versatility. >>>
    View the product on sinco.com Sinco Groupe - Capital Safety
    HANDLAMPS - WOLFLITE H-251

    HANDLAMPS - WOLFLITE H-251
    The Wolflite H-251 is a rechargeable Handlamp approved by BASEEFA and suitable for use in hazardous zones 1 and 2. Since its launch in 1980 the Wolflite has found a place as the market leader in hazardous area portable lighting equipment. Applications include the Petrochemical and Offshore industries, Fire-fighting, Gas and Water distribution, in short wherever a potentially explosive atmosphere may occur. >>>
    View the product on wolf-safety.co.uk The Wolf Safety Lamp Co.
    HANDLAMP - WOLFLITE H-251

    HANDLAMP - WOLFLITE H-251
    WOLFLITE H-251 Product Information The Wolflite H-251 is a rechargeable Handlamp approved by BASEEFA and suitable for use in hazardous zones 1 and 2. Since its launch in 1980 the Wolflite has found a place as the market leader in hazardous area portable lighting equipment. Applications include the Petrochemical and Offshore industries, Fire-fighting, Gas and Water distribution, in short wherever a potentially explosive atmosphere may occur. The Wolflite is constructed in highly durable polypropylene co-polymer, designed to withstand the effects of heavy industrial use. The glass lens is scratch and scuff resistant and will not discolour when in contact with chemicals. The entire product has been 'drop' tested for damage and both the outer and inner components proved equally highly resilient. Many unique design features are incorporated in the H-251 Handlamp, including; an interlock mechanism preventing internal access when the lamp is in use, short circuit protection via a ceramic fuse and a magnetically operated, hermetically sealed Reed Switch to avoid open internal sparking. The rechargeable battery pack is made up of two sealed lead acid cells assembled into a robust casing. This battery pack has a recharge/discharge life of approximately 500 cycles. Available in two versions, the H-251 Mk1 has a removable battery pack and remote battery charging unit so that, if the user has two or more battery packs, the lamp can always be available for use. The second version, the H-251 Mk2, has charging contacts on the base of the lamp to enable battery charging 'in situ' using the lamp charger. The H-251 Mk2 Lamp chargers are available for mains (120/230v) input or low voltage (12-32v) input for use in vehicles. All chargers have Light Emitting Diodes which indicate state of charge, a rating plate on the charger explains the sequence of this. The Wolflite H-251 Handlamps conform with the DOT Class I 'Safety Lamp' specification, Regulation 17 of the SOLAS protocol and have been issued with a Lloyds Register of Shipping Type Approval Certificate. The Wolflite H-251 is supplied complete with battery pack, lock key and shoulder lanyard, together with maintenance instructions giving comprehensive details of spares available and guidance for installation. Technical Specification Wolflite H-251 3.6w spot beam (approx 3°) Peak luminous intensity at 5m 900lux Product reference H-251 Mk1 H-251 Mk2 Product description Rechargeable safety handlamp, battery charged externally Rechargeable safety handlamp, battery charged internally Code EEx e s II T3 Apparatus standards EN50 014, EN50 019, SFA 3009:1972 Type of protection e increased safety, s special protection Area of classification Zones 1 and 2, Gas Groups IIA, IIB, IIC Temp. classification T3 Ambient temperature -20°C to +40°C Certificate BASEEFA Certificate No. Ex 81142 Enclosure Polypropylene Lens Toughened glass (6mm) Beam type Spot Light source: Pt. no. H-26 Type Krypton filled filament bulb Volts 3.6v Watts 3.6w Output 80 lm (at 4.1v) Life 100hrs Power source: Pt. no. H-16E Type Rechargeable battery, sealed lead acid Volts 4v Capacity 5Ah Life up to 500 recharge cycles Light duration 4-5 hours Ingress protection IP66 IP54 Weight (incl. battery) 1.5kg Compatible charger C-251 C-251 HV or C-251 LV$ >>>
    View the product on wolf-safety.co.uk Wolf Safety Lamp Company
    HI-POWER BELT

    HI-POWER BELT
    The wrapped classicasection Hi-Power® V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power® belt provides superior strength to prevent “dishing” and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load. The Flex Weave® oil and heat resistant cover increases the angle facing the direction of pull. As a result, the Flex Weave® fabric develops even less stress for a given amount of bending. Identification Durable red marking indicating type and dimensions. Construction Classical cross-section. Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear. The Flex Weave® oil and heat resistant cover protects the belt core from the toughest environments. The vulcanised “Flex-bonded” tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads. High-quality rubber compound protects the belt against heat, ozone and sunlight. The belt will not catch fire from heat build-up, even with severe slippage. Static conductive (ISO 1813). Advantages Excellent performance/cost ratio. Reliability and efficiency. Long belt life reducing replacement and maintenance costs. Match system: all sizes meet Gates UNISET tolerances. >>>
    View the product on gates.com/europe/ GATES HYDRAULIC LTD
    NUWAI 5 WATT LED FLASHLIGHT ALX-253L - BLACK

    NUWAI 5 WATT LED FLASHLIGHT ALX-253L - BLACK
    Nuwai 5 Watt LED Flashlight ALX-253L :: Black This torch is a no nonsense approach. It has a single operation switch from off to full power only. The body of the torch measures 1inch which fits tactical applications. Ideal for shooting and lamping. 5 Watt Luxeon V LED 10,000hrs lifetime LED Water resistant Includes carrying strap and nylon pouch 3x CR123 (included) 120 lumens output power Size 34 x 175mm Weight 205g >>>
    View the product on nuwai.co.uk RAWDNA LTD
    PILA TACTICAL TORCHES - PILA GL 2 SERIES - 6V XENON

    PILA TACTICAL TORCHES - PILA GL 2 SERIES - 6V XENON
    Personal Protection and Tactical Flashlight – 120 lumens Small, handy and powerful Interchangeable ultra-bright 6V Xenon and LED Emitter Dual-powered – standard Lithium CR123A and Pila rechargeable Li-ion batteries Emergency Light – LED tail-cap will light for over 80 hours on one battery charge (Pila Li-ion 600P)Batteries: 2 x CR123A lithium Xenon lamp output: 120 lumens Run time: 60 minutes Batteries: 1 x Pila 600P Li-ion Xenon lamp output: 60 lumens Run time: 120 minutes Reflector: Precision machined aluminium Lens: Tempered glass Switch / Tail-cap: Various, see Options >>>
    View the product on safety-light.co.uk Pathfinder-Fox Ltd
    AVIATOR GOGGLES

    AVIATOR GOGGLES
    Aviator Retro Pilot has been specifically designed by Jeantet for use with Jet helmets. Close collaboration with Davida ensures excellent fitting. This goggle creates a distinctive look with any of the Davida open face jet type helmets.All Pilot Goggles are supplied with protective bag and fitted with clear lenses. Aviator Retro Standard provides an ideal complement to the Davida Classic, featuring a highly versatile adjustable screw nose bridge (except Cuir Mask). The unique design ensures a comfortable, individual fit with an effective airtight seal. The sliding mechanism widens the nose bridge by an extra 1-10mm allowing the frames to sit neatly around the eye sockets. A pivoting joint between the bridge and the frame allows the goggle to closely follow the curvature of the face. >>>
    View the product on davida.co.uk Davida UK Ltd
    DIVATOR MK II

    DIVATOR MK II
    DIVATOR MK II is the diving apparatus that meets the demands from the professional diver. Interspiro developed Divator MK II in collaboration with physiologists, professional divers, the Royal Swedish Navy and naval authorities from around the world. DIVATOR MK II is prepared for tough jobs and demanding environments. It is designed to be easy to operate in all environments and under all conditions. DIVATOR MK II does not only offer safety and reliable operation, but also excellent return on the investment. That is the reason why military organisations, fire and rescue services, police forces, coast guards and professional civilian divers around the World prefer DIVATOR MK II. advantages of divator MK II 1 The entire Divator MK II SCUBA has a CE-approval All parts of the breathing circuit is tightly integrated 2 Automatic reserve warning Reducing manual procedures improves safety 3 Close fitting design Excellent for diving in confined spaces 4 Main parts have finger-tight fittings Easy to operate and maintain in field 5 Silent operational mode Communicate without noise interference 6 Low volume dead space facemask Reduces the reinhalation of CO² 7 Fit spectacles, communication devices and add-ons Flexibility for different divers and diving operations 8 Optimum performance from the Arctic to the Equator An out of the box configuration works in -30°C to +70°C technical data standard features Quick connection for extra air outlet, buddy breathing or surface supply Pressure gauge Warning device, relief valve integrated in the breathing valve Anti-freezing device on both the first and second stage regulator Cylinder package have burst disc to prevent overload options/accessories Swiveled coupling for regulator top Hose for connection of a variable volume diving suit or a life jacket Additional quick connectors for different applications Diving telephone Compressors Cylinder charging panels Mouthpiece Buoyancy compensation options MK II Bail-Out set for Divator DP1 >>>
    View the product on interspiro.com INTERSPIRO LTD
    KEE ACCESS

    KEE ACCESS
    Kee Access Cost Effective Handrail Suitable For Stairs, Ramps, and Walkways Under the terms of the DDA, all commercial and public building owners are obliged to provide non-discriminatory access. Our new Kee Access style of handrail meets all these requirements, and more. Meets Code & Regulation To help builders, contractors and specifiers ensure that all commercial and public buildings satisfy the requirements of the Disability Discrimination Act (DDA) and Building Regulations Pt.M : 2004, Kee Safety Ltd has introduced a new series of galvanised cast iron fittings. The Building Regulations recommend an outside diameter tube size for such installations of between 40mm-45mm. The new Kee Access safety solution is specifically designed to give a smooth handrail with size 7 tube (outside diameter 42.4mm) and is therefore compatible with the recommendations. The new Kee Access series incorporates a total of nine new fittings and is supplied with versatility, ease and speed of installation in mind. Ideal for use in creating new structures, the series can also be used as a retrofit solution, because it includes an “Add-on” offset fitting which allows a new handrail to be added onto an existing structure of appropriate size. >>>
    View the product on keeklamp.com Kee Klamp Ltd
    CHELSEA GUN CABINET

    CHELSEA GUN CABINET
    This range of safes has been specifically designed for the more discerning customer. These fully insurance approved safes and gun cabinets are encased within a stylish wooden cabinet, giving them the appearance of an ordinary piece of furniture. The wooden surround, finished with an Italian Walnut veneer and has a simple, classic design. Perfect for the home and office the Chelsea will simply blend in with your décor. You no longer have to worry about where to hide your safe because you can put the Chelsea wherever is most convenient for you. Excludes ammo box Unique, elegantly styled furniture safe Designed & manufactured in Italy High quality, integral wood cabinet with Italian walnut veneer High security key lock as standard Electronic locking available upon request Racking for 7 guns and lockable ammo box in model 1500FT Back and base fixing >>>
    View the product on burtonsafes.co.uk Burton Safes
    DELTA™ II ARC FLASH HARNESS - 1101958

    DELTA™ II ARC FLASH HARNESS - 1101958
    Delta™ II Arc Flash Harness 1101958 The Delta No-Tangle™ design holds the shape of the harness, making it easier to differentiate the front from the back and don quickly and easily. Arc Flash is resistant up to 40 cal/cm2. Meets or exceeds all applicable standards including EN361and EN358. Features : Delta back pad Tongue buckle body belt Leather insulators Back and side PVC coated D-ring Quick-connect buckles Side adjuster buckles - 1101958 Small - 1101959 Medium - 1101960 Large - 1101961 X Large Lanyards Arc Flash : - 1220869 Single leg - 1220590 Twin leg >>>
    View the product on capitalsafety.com CSGNE
    EYEPROTECTION FOR PROFESSIONALS - SUPER G, UVEX

    EYEPROTECTION FOR PROFESSIONALS - SUPER G, UVEX
    Super G, Uvex The world’s lightest safety spectacle At only 18 g • Thin lens with exceptional optical clarity • Lenses have ideal aerodynamics and are angled forwards to provide excellent ventilation, keeping the eyes comfortable • The frame is made of ultra light, high-tech polymers, guaranteeing maximum flexibility. The innovative side temples concept features Uvex X-stream-technology for an excellent, non-lip fit and a wide range of applications. >>>
    View the product on agbscientificsolutions.com AgB Scientific Solutions
    BROOKLANDS - AEA050-044-900: EAR DEFENDERS

    BROOKLANDS - AEA050-044-900: EAR DEFENDERS
    Brooklands A range of great value ear defenders offering the perfect blend of comfort and protection. Slide adjusting and self aligning ear cups for a perfect fit, Soft foam cushions for all day comfort and prolonged wearer use. Large foam filled cups offer excellent attenuation Padded headband for optimum comfort Durable high impact polystyrene cups Packed in display bags Hygiene kits also available Conforms to EN 352-1 H=33 M=27 L=18 SNR=30 Description A range of great value ear defenders offering the perfect blend of comfort and protection. Slide ... >>>
    View the product on jsp.co.uk Jsp
    ALTRAC

    ALTRAC
    Altrac is a patented extruded aluminium rail section with free-running external trolleys (see below).The T-slot system at the top of the rail works in conjunction with a range of brackets to assemble a crane or fall arrest system in almost any size or shape. A special alloy can be rolled into 90, 180 or even custom bends.Due to the strict control of the raw materials used, Altrac is strong, safe and adaptable while still weighing less than 7kg per metre. Altrac workstation cranes can accommodate loads from 25kg to 1,000kg. >>>
    View the product on swift-tech-ltd.co.uk Swift-Tech Ltd


    12Suivant >>Fin >
    Go to page


      Search    
     
     
     
    Search
    See all of the sector's products : Safety