Selection of 7 products among
7
C16 / M - TANK WEIGHING MODULE FOR 20 T ... 200 T
C16 / M - Tank weighing module for 20 t ... 200 t
Whether for building industry tanks, coal bunkers or tanks for liquids and gases, C16 weighing modules have the specific properties required and
are available for all applications.
All the weighing modules, whether galvanized or made of stainless steel, are fitted with integrated stay rods to absorb the horizontal forces, such as typically occur with wind loads. Anti-liftoff devices are included in the design as an accessory and can be easily fitted by the user when required.
The metrological heart of the module is the C16 selfrestoring pendulum load cell, which is available in various versions.
Special features of C16 weighing modules:
Accuracy class D1, C3 or C4 under OIML
ATEX95 zones 1+21, zones 2+22
FM approval (explosion protection for the USA)
Overvoltage protection
Digital output
The weighing modules are available with maximum capacities ranging from 20 t to 200 t. This allows tanks of up to approximately 1,200 t, to be constructed and, subject to the design, also made legal for trade. All permissible mechanical data must be certified by the relevant independent Technical Inspectorate, in accordance with DIN 18800.
Key Feature(s)
Equipped with self-restoring rocker pin load cell C16 class D1 according to OIML R60
Transverse control arm included in the scope of supply
Designed for lift-off securing device
Maintenance-free
Compact installation at minimum installation height
Easy installation
Galvanized material and stainless steel version available
Nominal load
20 t / 30 t / 40 t /60 t / 100 t / 200 t
>>>
View the product on hbm.com
HBM UK
HLC/MLB - WEIGHING MODULE FOR 220 KG ... 4.4 T
HLC/MLB - Weighing module for 220 kg ... 4.4 t
HBM supplies HLCM... weighing modules with maximum capacities of 220 kg, 550 kg, 1.1 t, 1.76 t, 2.0 t, 2.2 t and 4.4 t.
They are mainly designed
for tank weighing applications and they are equipped with a lift-off securing device. The modules consist of a base plate, the load cell complete with load application elements, and the cover plate. A pendulum support is used for the load application, providing compensation for horizontal load shifts (as, for example, can arise through thermal strain). The weighing modules are pre-assembled and supplied with grounding cable.
Key Feature(s)
Equipped with load cell HLCB class D1, qualified for legal for trade applications according to OIML R60
Compact installation at minimum installation height
With transverse stay rod
Self-restoring due to pendle bearing
Galvanized material and Stainless steel version available
With lift-off device and lifting device
Nominal load
220 kg / 550 kg / 1,1 t / 1,76 t / 2 t / 2,2 t / 4,4 t
>>>
View the product on hbm.com
HBM UK
