Parafoudres - Paratonnerres (translation in progress): suppliers, wholesalers and manufacturers on Hellopro
Search   


Parafoudres - Paratonnerres (translation in progress) :

35 products
Select the category
Selection of 35 products among 35
SEMICONDUCTOR - ASIC

SEMICONDUCTOR - ASIC
Epson's ASICs aim at providing the best overall solution thus enabling our customers to get products to market successfully. Our product range includes Gate Arrays that address the need for fast turnaround at low IC development costs, Standard Cells that make System Solutions possible at the lowest unit price, and Embedded Arrays that combine the fast turnaround time for Gate Arrays with the ability to implement system level funcionality on-chip available with Standard Cell. >>>
View the product on epson-electronics.de Epson Europe Electronics Groupe - Seiko Epson
SEMICONDUCTOR - PLASMA TREATMENT SYSTEM FLEXTRAK™

SEMICONDUCTOR - PLASMA TREATMENT SYSTEM FLEXTRAK™
The FlexTRAK™ plasma treatment system is the latest addition to the March TRAK series, and is a highly configurable, high-throughput plasma system. Its universal architecture accommodates a multitude of material handling configurations to support a wide assortment of variable-size form factors. Its small chamber volume and proprietary process control enable unmatched short cycle times, while its slim structure minimizes floor space requirements. HIGH-THROUGHPUT PROCESSING CAPABILITY The FlexTRAK system handles a wide variety of product form factors, including boats, carriers, Jedec/Auer® boats, strips, laminates and wafers. Depending on throughput and product form requirements, the system can be configured for magazine- to-magazine processing of single and multiple strips or lead frames, reel-to-reel, wafer processing, and standalone for island-based production environments. >>>
View the product on hybrid-tech.co.uk Hybrid Technology Services Ltd
LOW VOLTAGE POWER SYSTEMS PROBLOC BS(R) 50 (3+1)

LOW VOLTAGE POWER SYSTEMS PROBLOC BS(R) 50 (3+1)
# For TT Three-phase Systems # Iimp = 12.5kA / pole # Imax = 50kA / pole # High Energy MOV and GDT # Compact Housing The PROBLOC BS(R) 50 (3+1) series of over voltage surge protective devices has been developed to protect against partial direct and indirect lightning discharges and is intended to provide protection in zones 0A - 1 as per IEC 62305.The (3+1) range is intended to be used on TT three phase networks, where N to PE galvanic isolation is required.The circuit topology consists of three varistor stages each protected by a thermal disconnection device. Each unit comprises a total of three high performance MOV blocks, providing a surge rating suitable for branch service applications. An encapsulated air gap (GDT) provides galvanic separation between the N and PE conductors. A unique indicator monitors all disconnectors and brings up a common status flag if any one stage should fail. Category IEC / EN / VDE: Class I / Type 1 / B+C Location of use: Main distribution boards Protection modes: L - N, N - PE Protective element: High energy MOVs, high energy GDT High surge discharge ratings: Iimp = 12.5kA / pole, Imax = 50kA / pole Internal protection and safety: Separate thermal disconnector for each MOV block Status indication: Mechanical flag + remote contacts (R) >>>
View the product on iskrazascite.si Iskra ZaÜcite
AKKUTEC 2420 3PHASE TESTED WITH 6 KV SURGE VOLTAGE

AKKUTEC 2420 3PHASE TESTED WITH 6 KV SURGE VOLTAGE
The protection of devices against surge voltage, which may be caused by lightning strikes and switching operations, is defined in the EN61000-4-5. The norm requires, that devices which are used in the common mains must be tested at least according to class 3. The device which is tested, undergoes voltage pulses of 1 kV between the conductors and 2 kV between conductor and earth. The rise time and the fall time of the nominal pulse lays between 1,2 µs and 50 µs. Most of the standard power supplies are tested according to this testing severity and thus correspond to the norm. But in the international use surge voltages may occur which exceed those during the testing conditions and which destroy the primary circuits. Because of an integrated special multi-level over voltage protection circuit the DC-UPS system AKKUTEC 2420 is enormously safer. This protection circuit works in such an effective way that surge voltages up to 6 kV can not destroy the device. The AKKUTEC 2420 is tested conductor against conductor as well as conductor against earth with 6 kV. So you may obtain a protection which is 6 times higher than the protection of a power supply which is tested according to the minimum requirements. >>>
View the product on j-schneider.de J. Schneider Elektrotechnik
POWER - MOSFETS - 1000V - 1500V > 2SK RANGE

POWER - MOSFETS - 1000V - 1500V > 2SK RANGE
Super high voltage Power-MOSFETs rated above 1000V - 1500VThe SANYO range of high voltage, low RDS power MOSFETs builds on the Sanyo pedigree of bringing innovative, cost effective semiconductors to market and adds to their already diverse range of MOSFETs starting at just 12V.The innovative new surface mount packaging from Sanyo comes in an SMP-FD or ZP format and combines small form factor of just 10.2(w) x 12.9(l) x 4.5(h) mm for the SMP-FD and the miniature 10 (w) x 10 (l) x 2.5 (h) mm for the ZP version.For technical information and details of the Sales Engineer in your area, please call 0118 976 9000 or email us. >>>
View the product on sequoia.co.uk Sequoia Technology Ltd
DISTRIBUTION SURGE PROTECTOR - DSP600 SERIES

DISTRIBUTION SURGE PROTECTOR - DSP600 SERIES
These general purpose, hardwired single and three phase distribution panel protectors with 30kA of surge capacity and two stage (redundant) protection provide pre-failure indication. DSP600 Series ‘L’ & ‘N’ types have site fault condition indicators and relay contacts, which provide remote indication of protection status. • Low 'let through' voltage of 600 volts • Two stage (redundant) protection with pre failure indication • Full protection status indication, with remote signalling option • Site fault indicator option >>>
View the product on energy.tycoelectronics.com Tyco Electronics - Dorman Smith Switchgear Ltd
DAT CONTROLER® PLUS LIGHTNING CONDUCTORS

DAT CONTROLER® PLUS LIGHTNING CONDUCTORS
Foresight and efficient protectionAn Early Streamer Emission Lightning Conductor in characterized by its reaction to the lightning aproach, being the first one to capture it in its radius of action, to conduct it to the ground in a safe way. Immediate reaction. The standard name is "time in advance" (t) It determines the radius of protection of the air terminal and must be tested and certified by official and therefore independent laboratories. Maximal resistance, non perishableIt is essential for these tests to be preceded by lightning current withstanding tests, with the aim of proving that the air terminal is not perishable and keeps working even after several lightning discharges. Performance under rain On the top of that, an air terminal must mantain its performance in all types of weather conditions because rain could short-circuit it and make it lose its effectiveness. Independence and reliabilityIn order to offer a better guaranty for the end user, the air terminals Dat Controler® Plus are submitted to tests performed by official independent laboratories and they have gained the AENOR product quality seal of certification. >>>
View the product on aplicaciones-tecnologicas-sa.es Aplicaciones Tecnologicas
SEMICONDUCTOR - AUDIO SOLUTIONS

SEMICONDUCTOR - AUDIO SOLUTIONS
Epson audio solutions reflect the actual demand for flexible audio decoder and speech recognition chips. Epson audio solutions offer a wide range of applications such as speech enabled portable devices, assistive applications for visually / speech impaired persons, educational toys, mobile handsets (ring tones and music playback) portable music players, automotive audio systems and automotive navigation systems. >>>
View the product on epson-electronics.de Epson Europe Electronics Groupe - Seiko Epson
FAST, EFFICIENT AUTOMATED FLASH PROGRAMMING - 3000FS

FAST, EFFICIENT AUTOMATED FLASH PROGRAMMING - 3000FS
The 3000FS is a fine-pitch automated device programmer designed specifically for flash memory programming. See supported devices and programming times for the Flashstream. As an example, the 3000FS can produce a fully programmed 512Mb NAND flash every 3.4 seconds. On-the-fly vision centering allows the 3000FS to handle almost every semiconductor package on the market today including TSOP, BGA’s while maintaining full-handling throughput. The 3000FS offers flexible options for input and output media with choices of tube, tray or tape. Whether you are programming 20,000 or 500,000 parts per month, the 3000FS is the fastest production flash memory programmer on the market today. The 3000FS combines the best qualities of our robust 3000 series device handling system, with our latest Flashstream programmer site technology, to produce the fastest production solution for flash memories. Features High-speed flash programming with 16 sockets utilizing Flashstream socket cards. Production throughput up to 1050 devices per hour. Supports high density NAND and NOR flash memory as well as EPROM's. 32Gb onboard memory module included per site. Expandable for future needs. 20ns verify with Vector Engine Co-Processor technology Serialization support on all sockets. NAND Bad Block handling: Bad block replacement scheme included Custom and manufacturer approved NAND Flash bad block handling methods available Very low voltage support On-the-fly vision centering and fine-pitch handling without throughput reduction. Handles all package types from DIP to µBGA including very small package such as SOT23 and MSOP8, a BPM Microsystems exclusive. Automated tray shuttles provide true non-stop operation. Automatic self-teaching Small footprint USB 2.0 communications bus Configurable options and quick job changeover make it ideal for high mix or high volume production. Variety of input/output and marking options with tubes, trays or tape. The fastest programming times and unrivaled throughput means lower cost-per-device. >>>
View the product on bpmicro.com BPMICRO
SEMICONDUCTOR - PLASMA TREATMENT SYSTEM FLEXTRAK-WR™

SEMICONDUCTOR - PLASMA TREATMENT SYSTEM FLEXTRAK-WR™
The FlexTRAK-WR system is designed for high-throughput processing of semiconductor wafers up to 300mm (12 in.). The patented plasma chamber design provides exceptional etch uniformity and process repeatability. Its three-axis symmetrical chamber ensures all areas of the wafer are treated uniformly, while tight control over all process parameters ensures highly repeatable results. HIGH-THROUGHPUT PROCESSING FlexTRAK-WR system’s integrated semiconductor wafer handling system provides rapid material transfer for a wide range of wafer sizes, up to 300mm (12 in.). Processing can be done from most types of wafer cassettes and front opening unified pods (FOUP). The patented chamber design and control architecture enables short plasma cycle times with very low overhead, ensuring that throughput for your application is maximized and cost of ownership is minimized. >>>
View the product on hybrid-tech.co.uk Hybrid Technology Services Ltd
LOW VOLTAGE POWER SYSTEMS PROTEC BS(R) 75

LOW VOLTAGE POWER SYSTEMS PROTEC BS(R) 75
# Single-pole SPD # Iimp = 75kA # Imax = 150kA # High Energy MOV # Compact Housing The PROTEC BS(R) 75 series of low cost, over voltage surge protective devices has been developed to protect against partial direct and indirect lightning discharges and is intended to provide protection in zones 0A - 1 as per IEC 62305. It consists of three separate, high performance dual MOV blocks, each with a separate disconnection device. Category IEC / EN / VDE: Class I / Type 1 / B+ C Location of use: Main distribution boards Protection modes: L/N - PE, L - PEN Protective element: High Energy MOV High surge discharge ratings: Iimp = 75kA, Imax = 150kA Internal protection and safety: Separate thermal disconnector for each MOV block Status indication: Mechanical flag + remote contacts (R) >>>
View the product on iskrazascite.si Iskra ZaÜcite
DC-UPS-SYSTEMS WITH WIDE-RANGE INPUT

DC-UPS-SYSTEMS WITH WIDE-RANGE INPUT
The 5 A and the 10 A systems of the series AKKUTEC of the J. Schneider Elektrotechnik GmbH are now delivered in standard version with an additional wide-range input from 95 V ..... 250 V. Thus the system does not only work at an input voltage of 230 V +/- 15 %, but also works faultlessly at an input voltage which lies out of this range. Because the systems can be operated either in Master-Slave mode or in redundant-mode, complex systems with high ratings and extremely high safety can be realized. The wide range input was also realized at the three-phase 20 A version and at the 40 A-Version. At this systems, the input diversifies in the range of 3 x 400 - 500 V –15% + 10%. These units may be operated as stand-alone modules for load currents from 20 A to 40 A. As a system in master-slave operation up to 5 systems may be connected in parallel, so that the output current may reach 200 A. The back-up times may be a few minutes or secondes or even several days, depending on the battery pack. The integrated PFC, the regulation of the mains disturbances at the input according to EN 61000-3-2 and the deep discharge protection are also realized in the units with wide-range input. >>>
View the product on j-schneider.de J. Schneider Elektrotechnik
POWER - THERMISTORS AND CIRCUIT PROTECTION > NTXX

POWER - THERMISTORS AND CIRCUIT PROTECTION > NTXX
NTC Thermistors are radial leaded discs designed for durable performance.Typical applications of Ametherm's NTC thermistors include* Temperature Measurement* Temperature Control* Temperature CompensationNTC thermistors are very useful. Read More for applications, descriptions and configurations. Ametherm manufactures a variety of NTC thermistors. Our most popular thermistors are listed along with a sample of Ametherm's R/T (Resistance/Temperature) curves. >>>
View the product on sequoia.co.uk Sequoia Technology Ltd
PLUG-IN PROTECTION MODULE - SPM SERIES

PLUG-IN PROTECTION MODULE - SPM SERIES
The SPM series comprises separate 1, 2, 3 or 4 modular DIN rail connection bases, and a comprehensive range of 6kA or 40kA replaceable plug-in protection modules with integral mechanical status indication, which simply plug-in. Connection bases are available with, or without, an additional remote status indication facility. • Single and three phase options • Hot working replaceable plug in modules • Thermal and current overload fusing • Protection status indication >>>
View the product on energy.tycoelectronics.com Tyco Electronics - Dorman Smith Switchgear Ltd
SEMICONDUCTOR - GRAPHIC CONTROLLER

SEMICONDUCTOR - GRAPHIC CONTROLLER
Epson's range of LCD-Controllers support the image input and output functions required of mobile, automotive and industrial devices. It includes camera interfaces, 2D/3D accelerators, compression/ decompression, still images and video interfaces. Supporting a wide range of display interfaces for Passive, TFT and OLED display technologies, the Epson LCD-Controller portfolio is constantly updated in order to represent the state-of-art technology within this area. The application area of Mobile Graphic Engines are cellular phones and other mobile devices which require low power together with adequate performance. The range of use of the standard LCD Controllers is in the field of automotive and industrial applications mostly. >>>
View the product on epson-electronics.de Epson Europe Electronics Groupe - Seiko Epson
FLASHSTREAM FLASH VECTOR - 2800F

FLASHSTREAM FLASH VECTOR - 2800F
The Flashstream™ Flash Vector Programming System is the fastest flash memory programmer on the market today designed specifically to program NAND and NOR flash memory devices at amazing rates of speed. See supported devices on the Flashstream including their programming times. Samsung Device Test For example, the Samsung 512Mb OneNAND KFG1216Q2A-DEB5 programs at 12 times faster than current flash programmer technology. The device was cycled through functions of erase, program, verify of a random full data pattern in an amazing 15.4 seconds while staying with in manufacturer specified programming requirements. Read about other tests. Vector Engine Featuring the Vector Engine Co-Processor™, which gives the Flashstream the programming industry's lowest programming overhead while maintaining the highest production quality programming signal; an industry first for production programming. Features Supports high-density NAND and NOR flash memory as well as EEPROM's Serialization support on all sockets 20ns verify with Vector Engine Co-Processor technology Can program up to a 32Gb memory device. Supports all device packages, including but not limited to, DIP, SDIP, PLCC, TSOP, SSOP, PCMCIA, SOIC, LCC, QFP, PQFP, PGA, SIMM, CSP, BGA, µBGA, TQFP and TSSOP High-speed USB 2.0 communication to PC host NAND Bad Block handling: Bad block replacement scheme included Custom and manufacturer approved NAND Flash bad block handling methods available >>>
View the product on bpmicro.com BPMICRO
SEMICONDUCTOR PLASMA TREATMENT SYSTEM FLEXTRAK-BH™

SEMICONDUCTOR PLASMA TREATMENT SYSTEM FLEXTRAK-BH™
The FlexTRAK-BH system is designed for high-throughput processing of microelectronic boats, trays, or other flat device carriers, up to 2 boats per plasma cycle. The patented plasma chamber design provides exceptional uniformity and process repeatability. Its three axis symmetrical chamber ensures all areas of the product are treated uniformly, while tight control over all process parameters ensures highly repeatable results. HIGH-THROUGHPUT PROCESSING The FlexTRAK-BH system’s integrated boat handling system provides rapid material transfer for a wide range of boat sizes, up to 2 boats per plasma cycle. Processing can be done with most types of boats, trays and flat carriers. The patented chamber design and control architecture enable short plasma cycle times with very low overhead, ensuring that throughput is maximized and cost of ownership is minimized. >>>
View the product on hybrid-tech.co.uk Hybrid Technology Services Ltd
LOW VOLTAGE POWER SYSTEMS PROTEC C(R) 40

LOW VOLTAGE POWER SYSTEMS PROTEC C(R) 40
# Single-pole SPD # In = 20 kA # Imax = 40kA # MOV # Modular Housing The PROTEC C(R) 40 series of low cost, over voltage surge protective devices has been developed to protect against indirect lightning discharges and is intended to provide protection in zones 1 - 2 as per IEC 62305.It consists of a high performance varistor block with thermal disconnection device. The plug-in module / base design facilitates replacement of a failed module without the need to remove system wiring etc. Category IEC / EN / VDE: Class II / Type 2 / C Location of use: Branch sub-distribution boards Protection modes: L/N - PE, L - PEN Protective element: MOV Surge discharge ratings: In = 20kA, Imax = 40kA Internal protection and safety: Thermal disconnector Status indication: Mechanical flag + remote contacts (R) >>>
View the product on iskrazascite.si Iskra ZaÜcite
LABJACK U3 USB FLEXIBLE DAQ UNIT

LABJACK U3 USB FLEXIBLE DAQ UNIT
LabJack U3 USB Flexible DAQ Unit Description A versatile low-cost USB multifunction data acquisition and control device. Has flexible inputs which can be configured for any mix and analogue inputs, and digital inputs/outputs. Supplied with a wide range of FREE Data logging software and examples for use with most programming and DAQ packages. Two versions now available - LV Low Voltage, similar to the previous U3 and the HV High Voltage which has 4 x 10/20V input ranges. U3-LV 16 Flexible I/O (Digital Input, Digital Output, or Analogue Input) Up to 2 Timers (Pulse Counting/Timing, PWM Output, Quadrature Input) Up to 2 Counters (32-Bits Each) 4 Additional Digital I/O 12-bit Analogue Inputs (0-2.4 V or 0-3.6 V, SE or Diff.) 2 Analogue Outputs (10-Bit, 0-5 volts) Supports SPI, I2C, and Asynchronous Serial Protocols (Master Only) Maximum Input Stream Rate of 2.5-50 kHz (Depending on Resolution) Capable of Command/Response Times Less Than 1ms Built-In Screw Terminals for Some Signals USB 2.0/1.1 Full Speed Interface Powered by USB Cable Drivers Available for Windows, Linux, Mac and Pocket PC Examples available for C/C++, VB, LabVIEW, Java, etc Includes Licensed Copy of DAQFactory Express Software (Win2000/XP) Includes USB Cable and Screwdriver Enclosure Size Approximately 75mm x 115mm x 30mm Rated for Industrial Temperature Range (-40 to +85 Degrees C) U3-HV Differences First 4 Flexible I/O are Changed to Dedicated HV Analogue Inputs. 4 HV Inputs have ±10 Volt or -10/+20 Volt Range. 12 LV Inputs (Flexible I/O) Still Available, for 16 Total Analogue Inputs. >>>
View the product on audon.co.uk Audon Electronics
SEMICONDUCTOR - INTERFACE ICS

SEMICONDUCTOR - INTERFACE ICS
According to the trend to develop more advanced and compact systems, Epson's interface IC product families enable highly integrated, high-speed and low power data transfer. In the Interface IC product family you will find a broad line-up of controllers to support data communication within the USB, IEEE1394, TCP/IP and Bluetooth standards. The state-of-the-art interface controller IC is Epson's proprietary technique that serves as IC for high-speed serial interface. These products are best suited for rapid data transmission linking mobile equipment like portable mass storage devices to peripheral PC. >>>
View the product on epson-electronics.de Epson Europe Electronics Groupe - Seiko Epson
FX SOCKET MODULES

FX SOCKET MODULES
FX socket modules offer improved programming speed over standard socket modules. Ideal for the programming of flash memory devices, FX modules are supported on both 6th and 7th Generation model programmers. Many FX modules are designed with a replaceable socket daughter card. This design feature extends the life of the socket module and improves signal integrity to the device. Presently we offer hundreds of manual and automated FX socket modules in support of a variety of packages and devices. >>>
View the product on bpmicro.com BPMICRO
SEMICONDUCTOR - PLASMA TREATMENT SYSTEM AP-1000

SEMICONDUCTOR - PLASMA TREATMENT SYSTEM AP-1000
The March AP-1000 is designed to meet the rigorous demands of 24-hour operation in high-performance manufacturing environments. The system delivers quality plasma treatment along with unmatched reliability, safety and ease of operation and maintenance. All the components of the system, including the plasma process chamber, the control electronics, the 13.56 MHz power supply with automatic impedance matching network, and the pumping system are housed within an enclosure constructed of rugged powder coated aluminum. Optional AP-1000 HTP for enhanced productivity The AP-1000 plasma system with HTP (high throughput) shelves combines the reliability and process quality of the AP- 1000 system with the proven benefits of March’s proprietary shelf design. >>>
View the product on hybrid-tech.co.uk Hybrid Technology Services Ltd
LOW VOLTAGE POWER SYSTEMS PROTEC C3F

LOW VOLTAGE POWER SYSTEMS PROTEC C3F
# For Three-phase Systems # In = 10kA / pole # Imax = 20kA / pole # MOV and GDT # Compact Housing The PROTEC C3F series of low cost, over voltage surge protective devices has been developed to protect against indirect lightning discharges and is intended to provide protection in zones 1 - 2 as per IEC 62305.It consists of a high performance MOV with thermal disconnection device. The plug-in module / base design facilitates replacement of a failed module without the need to remove system wiring etc. Category IEC / EN / VDE: Class II / Type 2 / C Location of use: Branch sub-distribution boards Protection modes: L1, L2, L3-PEN; L1, L2, L3-N, N-PE Protective element: MOV, GDT Surge discharge ratings: In = 10kA/pole, Imax = 20kA/pole Internal protection and safety: Thermal disconnector Status indication: LED >>>
View the product on iskrazascite.si Iskra ZaÜcite
MYPCLAB USB UNIVERSAL INPUT DAQ

MYPCLAB USB UNIVERSAL INPUT DAQ
MyPCLab USB Universal Input DAQ Description myPCLab is a very compact Data Acquisition tool which connects to a PC via a USB port and monitors two universal analogue inputs, accepting thermocouples, Pt100, Voltages and 4-20mA current loops along with one digital input. It comes with an intuitive and easy-to-use Windows software which plots and records data, shows gauges, bargraphs and digital readouts. The USB port is accessed as a virtual serial port which makes myPCLab compatible with ANY SCADA software with Modbus RTU driver or with any program with ASCII serial communication. Multiple units of myPCLab can be connected to the same computer. Dual universal type analogue inputs. One digital input. Internal temperature sensor for cold junction compensation or room temperature monitoring. Programmable analogue inputs: Thermocouples type J, K, T, E, N, R, S and B, Pt100 RTD (3-wire), 4-20mA, 0-50 mVdc or 0-10 Vdc. Accuracy: 0.2% of full scale for Pt100, current and voltage; 0.25% of FS ±3°C for thermocouples type R,S and B; 0.25% ±1°C for all other thermocouples; 1.5ºC for internal temperature sensor. Sampling rate: 8 to 128 samples per second, depending on the A/D resolution. A/D resolution: programmable from 15 to 11 bits, depending on the sampling rate. Automatic cold juction compensation for thermocouples. Digital input for dry contact or voltage level. Computer interface: USB V1.1 Plug and Play, Virtual Serial Port driver. Double communication protocol: ASCII & Modbus RTU. Powered by the USB bus. Consumption: >>>
View the product on audon.co.uk Audon Electronics
SEMICONDUCTOR - LCD CONTROLLER-DRIVER

SEMICONDUCTOR - LCD CONTROLLER-DRIVER
EPSON offers leading-edge LCD controller-driver ICs - our expertise in LCD technology is known world-wide and the controller-driver ICs are an essential part of it. The segment and/or common drivers are flexibly configurable and are available with a wide range of options like external/internal power supply, cascade connenction and internal display RAM. They are optimised for mobile devices with high demand for low power consumption and excellent optical performance. The single-chip passive LCD-driver portfolio includes features like internal display RAM, LCD voltage generator and re-programmable configuration registers. The single-chip TFT LCD driver ICs includes features like internal RAM, internal oscillation circuit, partial scrolling and partial display RAM. EPSON TFT gate and source drivers are suitable for amorphous TFT and LTPS TFT displays. >>>
View the product on epson-electronics.de Epson Europe Electronics Groupe - Seiko Epson
UNIVERSAL DEVICE PROGRAMMER - 1710

UNIVERSAL DEVICE PROGRAMMER - 1710
The 1710 Universal Device Programmer combines ultra-fast programming technology, BPM Micro's new FX4™ socket modules, and support for over 24,000 devices including very low voltage devices down to 1.5V. By taking advantage of the proven 7th generation technology, we have improved the site hardware to allow for programming devices with densities up to 4 Gbits. Supports over 24,000 devices with very low voltage devices down to 1.5V (Vdd) including, but not limited to, EPROM, EEPROM, Flash EPROM, Microcontrollers, PLD, CPLD, FPGA and antifuse FPGAs. Supports device densities up to 4 Gbits. Uses USB 2.0 communications bus. FX4™socket modules include 3 separate LED’s per socket and allow the 1710 to program 4 devices simultaneously. Compatible with all existing socket modules, standard and automated. Patented solution to guard against passing blank parts—available only from BPM Micro. Supports all device packages, including but not limited to, DIP, SDIP, PLCC, TSOP, SSOP, PCMCIA, SOIC, LCC, QFP, PQFP, PGA, SIMM, CSP, BGA, µBGA, TQFP and TSSOP. Ideal for design engineering and low-volume production. Ideal for low to mid-volume production. >>>
View the product on bpmicro.com BPMICRO
SEMICONDUCTOR - PLASMA TREATMENT SYSTEM FLEXTRAK-SH™

SEMICONDUCTOR - PLASMA TREATMENT SYSTEM FLEXTRAK-SH™
The FlexTRAK-SH™ system is designed for high-throughput processing of lead-frame strips, laminate substrates, and other strip-type microelectronic components, up to 5 strips per cycle. The patented plasma chamber design provides exceptional uniformity and process repeatability. Its three axis symmetrical chamber ensures all areas of the strip are treated uniformly, while tight control over all process parameters ensures highly repeatable results. HIGH-THROUGHPUT PROCESSING The FlexTRAK-SH system’s integrated strip handling system provides rapid material transfer for a wide range of strip sizes, up to 5 strips per cycle. Processing can be done from most types of magazines and carriers. The patented chamber design and control architecture enable short plasma cycle times with very low overhead, ensuring that throughput is maximized and cost of ownership is minimized. >>>
View the product on hybrid-tech.co.uk Hybrid Technology Services Ltd
LOW VOLTAGE POWER SYSTEMS PROTEC DM ®

LOW VOLTAGE POWER SYSTEMS PROTEC DM ®
# For TN-S Single-phase Systems # Uoc = 10kV / 5kA / pole # Imax = 10kA / pole # MOV # Modular Housing The PROTEC DM series of low cost, over voltage surge protective devices has been developed to protect against transient surges and is intended to provide protection in zones 2 - 3 as per IEC 62305. The circuit topology consists of two varistor stages each protected by thermal disconnection device to provide protection for single phase TN-S networks. The plug-in module / base design facilitates replacement of a failed module without the need to remove system wiring etc. Category IEC / EN / VDE: Class III / Type 3 / D Location of use: Branch sub-distribution boards Protection modes: L/N – PE Protective element: MOV Surge discharge ratings: Uoc/Isc = 10kV/5kA / pole Internal protection and safety: Thermal disconnector Status indication: Mechanical flag + remote contacts (R) >>>
View the product on iskrazascite.si Iskra ZaÜcite
USB-AD USB 16 CHANNEL DAQ UNIT

USB-AD USB 16 CHANNEL DAQ UNIT
USB-AD USB 16 Channel DAQ Unit Description The USB-AD is a low cost USB based multifunction I/O unit with 16 analogue inputs, 1 analogue output, 4 digital inputs and 4 digital outputs. Data can be acquired at up to 500Hz rate at 12-bit resolution. A range of analogue and digital expansion boards are also available. Supplied with a copy of NextView4-Live software for data acquisition and control and a wide selection of Windows, MAC and Linux programming examples. 16 single ended analogue inputs ±5V input range with 12-bit resolution single ±5V 12-bit analogue output 4 x 5V digital inputs 4 x 5V digital outputs USB 1.1 or 2.0 compatible All I/O connected via 37-way D-type socket Small 37-way D-type connector shell housing Windows 2000/XP/Vista, MAC, Linux drivers Supplied with a free copy of NextView 4 Live Supplied with programming examples in VB, C++ Delphi, .NET Can be used with LabVIEW and Profilab Graphical Programming Software Description The USB-AD is a low cost USB based multifunction I/O unit with 16 analogue inputs, 1 analogue output, 4 digital inputs and 4 digital outputs. Data can be acquired at up to 500Hz rate at 12-bit resolution. All I/O are presented to a 37-way D-type socket. The user can connect to this directly or optional expansion boards are available. For use with USB 1.1 and 2.0 systems, up to 127 units can be connected to a single PC. Drivers are available for Windows, MAC and Linux operating systems. The USB-AD is supplied with an Active-X component and comprehensive programming examples for use with most common programming languages. There are also VI for use with LabVIEW and there is a USB-AD component ion the ProfiLab programming package. The USB-AD is also supplied with a copy of nextView4-Live data acquisition and control software. With NextView-Live, the user can acquire and analyse data, set analogue and digital outputs and read the status of the digital inputs. The user can create their own screens, with chart displays, text, alarm panels, output sliders etc. NOTE - The Live version of NextView does not allow acquired data to be saved to disk for analysis later or exported to Excel. When the program is closed, all acquired data is lost. Please see other versions of NextView for this functionality. Also see the RealView software for a chart recorder package that can export data to Excel for analysis. >>>
View the product on audon.co.uk Audon Electronics
SEMICONDUCTOR - POWER SUPPLIES

SEMICONDUCTOR - POWER SUPPLIES
Epson's Power Supply series includes various model types dedicated for a wide range of application fields. The portfolio offers different model types (DC to DC Converters, Voltage Regulators, Voltage Detectors, Power Management ICs, Power Supply ICs for logic and liquid crystal displays). All Power Supply ICs are fabricated in highly developed process technologies, which provide extremely power saving products. >>>
View the product on epson-electronics.de Epson Europe Electronics Groupe - Seiko Epson




  Search    
 
 
 
Search
See all of the sector's products : Electricity/Electronics