Outils de frappe (translation in progress): suppliers, wholesalers and manufacturers on Hellopro
Search   


Outils de frappe (translation in progress) :

21 products
Select the category
    Selection of 21 products among 21
    EMI SHIELDING MONOSHIELD - 5000 SERIES

    EMI SHIELDING MONOSHIELD - 5000 SERIES
    Monoshield is intended for applications where the gasket is limited to 0.02 in. thickness and gap irregularities do not exceed 0.003 in. The material consists of a fine monel or aluminum which is expanded (as per MIL-S-46044) and impregnated with a 50 durometer silicone rubber. The manufacturing process exposes approximately 225 points of contact per square inch to provide an efficient EMI shield with a pressure seal good up to 50 PSI between mating surfaces. These gaskets should not be re-used after having been compressed. >>>
    View the product on tech-etch.com Tech-Etch
    SHRINKING DEVICES: I-TEC®XL

    SHRINKING DEVICES: I-TEC®XL
    I-tec®XL: The automatic stand device with three shrinking and cooling places With three shrinking and cooling places the i-tec®XL is ergonomically designed so that the tool holder is not moved during the whole cycle. The positioning of the induction coil is done by turning the column to the respective station. The lowering of the coil onto the shrink fit chuck, the heating and the return of the coil to its rest position is part of the automatic heating cycle. This eases the work of he operator, improves the acceptance and increases the performance at the device. The cooling inserts, the platform for milling cutters as well as the adapter flanges are arranged conveniently in the drawer of the cabinet. >>>
    View the product on kelch.de KELCH
    UNISORB® VECTOR® BOLTS

    UNISORB® VECTOR® BOLTS
    Made from high quality forged steel, VECTOR® Bolts have a series of angular facets which resolve vertical stress forces into a cone-shaped pressure pattern. An advantage of this unique design is the increased contact area between the bolt and the grout. The wedge shaped design on the bottom of the bolt transfers the tensile load of the stud into a lateral compressional load in the foundation, assuring maximum pull out strengths. The increase in load transfer to the foundation results in a reduction of the embedment depth required to obtain full strength of the anchor. This reduction in required embedment depth lowers the installation cost by reducing the core drilling and grouting requirements. VECTOR® Bolts are available in several metric diameters and lengths in a 90,000 psi minimum tensile strength material. >>>
    View the product on unisorb.com UNISORB
    EMI SHIELDING MULTISHIELD - 4000 SERIES

    EMI SHIELDING MULTISHIELD - 4000 SERIES
    Multishield is a composite material containing excellent EMI shielding with an efficient environmental seal. The material is manufactured with a matrix of wires embedded in silicone rubber and aligned perpendicular to the contact surfaces. Multishield is available in strips up to 5/8 in. wide, sheets up to 9 in. wide, custom gaskets and standard gaskets. Application Notes Adhesive Mounting Multishield can be bonded to sheet metal using a thin film of RTV 3145 (or equivalent) or 3M 950 pressure sensitive adhesive. Pressure must be applied to the bond for the duration of the adhesive cure time to assure good contact of the wires to metal. >>>
    View the product on tech-etch.com Tech-Etch
    TOOL HOLDERS: FLEXIBORE

    TOOL HOLDERS: FLEXIBORE
    FLEXIBORE: The modular tooling system for drilling and milling machines The modular tooling system Kelch FLEXIBORE is an approved program consisting of cutting heads and tool holders for the full spectrum of drilling and milling machine operations and can be adjusted very flexibly to the particular machining operation. Advantages: High stiffness through the axial connection of the large dimensional end face with a central anti-fatigue bolt. Easy to operate with radial clamping for the frontal change. Basic holders are available for all popular steep taper and hollow shank taper types. The length and diameter can be adjusted individually with adapters. >>>
    View the product on kelch.de KELCH
    TOOL HOLDERS: HSK

    TOOL HOLDERS: HSK
    HSK Technology The HSK technology is now an important part of the cutting process. No matter whether for high cutting speeds, difficult materials, high clamping volumes or precise machining, the hollow shank is optimal. KELCH has always been leading in the development of the HSK technology and manufactures a comprehensive range of excellent hollow shank products around the machine tool. HSK knowledge and a wide variety of well designed products support the machining centres and are great for resolving processing problems. * Tool holders for automatic tool changing ISO 12164-1 type A and DIN 69893 part 2 type B * Tool holders for manual tool changing ISO 12164-1 type C and DIN 69893 part 2 type D * Tool holders for a high number of revolutions Pre-norm DIN 69 893 part 5 and 6, type E and F * Measuring gauges and measuring devices for tool shanks, machine spindles, tool clamps etc. are an important part of this program >>>
    View the product on kelch.de KELCH
    EMI SHIELDING SUPERSHIELD - 1000 SERIES

    EMI SHIELDING SUPERSHIELD - 1000 SERIES
    Supershield is a silicone elastomer filled with conductive metal particles to provide high EMI shielding effectiveness and an environmental seal. The Supershield family uses eight basic conducting media: Supershield 100 with carbon, Supershield 200 with nickel graphite, Supershield 300 with silver (low density), Supershield 400 with silver nickel, Supershield 500 with silver aluminum, Supershield 600 with silver plated glass, Supershield 700 with pure silver, and Supershield 800 with silver-plated copper. Although the material specifications were determined at indicated durometers, other durometers are available from 40 to 80. Material specifications (with the exception of specific gravity) may vary at other durometers.Supershield can be supplied in a variety of sheet sizes, standard extrusion sections, or as standard or custom die-cut gaskets. >>>
    View the product on tech-etch.com Tech-Etch
    TOOL HOLDERS: I-TEC® SHRINK FIT CHUCKS

    TOOL HOLDERS: I-TEC® SHRINK FIT CHUCKS
    I-tec® Shrink Fit Chucks: Now even more robust and efficient The new improved i-tec® shrink fit chucks considerably surpass the ISO standard. Stability reducing details like counterbore or inserting tapers are a thing of the past. The increased percentage contact area of the tool holder around the tool shank reduces the bending moment. Benefits including: * Greater transferable torque * Improved cutter stiffness * Better concentricity * Longer service life of the tool cutting edge i-tec® shrink fit chucks are ground on the outside contour for improved run out and to optimise balance. In addition i-tec® shrink fit chucks are fine balanced and normally need no rebalancing. They are available short-term in ISO 40 and 50 as well as in the most common HSK sizes and types. The basic holders are available in three standard lengths and partly different geometries. Further applications are possible with the i-tec® extensions, which can be easily shrunk into the basic tool holder. >>>
    View the product on kelch.de KELCH
    EMI SHIELDING TRIMSHIELD - SERIES 9000

    EMI SHIELDING TRIMSHIELD - SERIES 9000
    Mesh on Aluminum Frame Trimshield EMI Shielding is a composite material made from resilient knitted wire mesh strips which are retained in an aluminum extrusion. It is ideal for use when a rigid gasket is required. The aluminum extrusion acts as a compression stop for the mesh to minimize compression set. Neoprene or silicone sponge may be used for an environmental seal. Trimshield Strips can be supplied in lengths of up to approximately eight feet. The knitted mesh EMI portion diameter may vary from 0.125 to 0.625 inches. Elastomer/knitted mesh combination should be used for the lower compression force gaskets and to achieve minimum compression set.The extrusion itself can be drilled or punched to suit your specific requirements. >>>
    View the product on tech-etch.com Tech-Etch
    TOOL HOLDERS: I-TEC®SLOTT

    TOOL HOLDERS: I-TEC®SLOTT
    I-tec®SLOTT: Keeps tools with shank tolerances of h9 process-sure Shanks out of the h6 tolerance, as for example taps, can now be clamped safely in shrink fit chucks as well. To cover larger tolerances, the shrink fit chuck is slotted at the shrink fit. This makes the application more flexible with regard to the clamping diameter and the material to be clamped. From h6 to h9 all shank diameters of steel, HSS or ceramics can be clamped. The tool is clamped by a sleeve shrunk over it. Thus the transferable torque, the stiffness as well as the concentricity are considerably better compared with usual holders. Also shank diameters smaller than 6 mm are no problem for the i-tec®SLOTT technology independent of their shank material. >>>
    View the product on kelch.de KELCH
    EMI SHIELDING TWINSEAL - SERIES 3000

    EMI SHIELDING TWINSEAL - SERIES 3000
    Twinseal gaskets provide an efficient environmental seal in addition to the EMI shielding from the attached mesh gasket. The mesh gasket is typically supplied in a rectangular profile and is available in all the standard materials and configurations found here. The environmental seal is available in either neoprene or silicone and can be produced with double-sided pressure sensitive tape for stick-on mounting or thru holes for fasteners. Picture frame configurations can be specified as a custom part with the environmental seal bonded at the corners. >>>
    View the product on tech-etch.com Tech-Etch
    EMI SHIELDING VENTS - SERIES 8000

    EMI SHIELDING VENTS - SERIES 8000
    Honeycomb The 8000 Series Vents are manufactured in both custom and standard configurations. EMI shielding performance is achieved from 1/8 cell aluminum honeycomb panels mounted in high strength extruded aluminum frames available in 9 styles as shown. Frame to enclosure shielding options include Twinseal, Mesh gaskets, Beryllium copper shielding strips or Metalized Fabric Gaskets. >>>
    View the product on tech-etch.com Tech-Etch
    GASKETS EMI SHIELDING METALIZED - 2600 SERIES

    GASKETS EMI SHIELDING METALIZED - 2600 SERIES
    2600 Series - EMI Shielding Metalized Fabric over Elastomer • Custom Gaskets Tech-Etch manufactures custom designed EMI shielding gaskets using 2600 Series metalized fabric wrapped around a polyurethane foam core and low cost rule-dies. The conductive fabric is bonded to the core assuring self-termination on all exposed edges. Rule die gaskets using metalized fabric with elastomer core can be designed and manufactured to suit your exact requirements. When designing a custom gasket, consider the following: Dimensional tolerances are influenced by the softness of the material. Minimum distance between any cutouts to the edge should be equal to the material thickness. Minimum hole diameters should be equal to the material thickness. >>>
    View the product on tech-etch.com Tech-Etch
    WEAVESHIELD EMI SHIELDING - 5500 SERIES

    WEAVESHIELD EMI SHIELDING - 5500 SERIES
    Weaveshield is a composite EMI shielding and pressure seal gasket material used for very small gaps having a joint unevenness of no more than 0.002 in. The material is comprised of a woven aluminum wire screen impregnated with either a neoprene or silicone elastomer. A closing force of 70 to 110 PSI is recommended to obtain a moisture seal. Under favorable conditions, a pressure seal can be obtained. Weaveshield can be supplied in sheets or die cut gaskets. For custom die cut gaskets, >>>
    View the product on tech-etch.com Tech-Etch




      Search    
     
     
     
    Search
    See all of the sector's products : Manufacturing and processes