Outillage à main (translation in progress): suppliers, wholesalers and manufacturers on Hellopro
Search   


Outillage à main (translation in progress) :

177 products
Select the category
    Selection of 41 products among 177
    RW 118 / RW 122 / RW 70 HIGH STRENGTH HOT CUTTING WIRES

    RW 118 / RW 122 / RW 70 HIGH STRENGTH HOT CUTTING WIRES
    These hot cutting wires have high strength at elevated temperatures and are used for cutting polystyrene (EPS) and or heat sealing woven polypropylene bags. RW 118 has the best performance on many different machine models. Some machines and operations prefer RW 122 or RW 70.To achieve the best cut, adjust the wire temperature and the speed of the block through the wire. The material type and it’s density will influence the cutting speed. >>>
    View the product on resistancewires.co.uk Resistance Wires Ltd
    COOL PULSE EXTRUDE HONE ECM

    COOL PULSE EXTRUDE HONE ECM
    With CoolPulse™ Extrude Hone continues to solve some of the most complex deburring and surface finishing challenges faced by a wide range of industries including, medical and pharmaceutical, precision instruments, electronics, timing devices, and other delicate component parts producers. Our pulsed electrolytic technology called CoolPulse, offers device manufacturers a new, cost-effective, and highly unique process for deburring, polishing, and cleaning virtually any small or complex component made from an electro conductive metallic material. >>>
    View the product on surftran.com SURFTRAN Groupe - Extrude Hone
    INSTANT TOWERMATIC T100

    INSTANT TOWERMATIC T100
    Instant Towermatic T100 is a lightweight low level work podium. Its flat-pack design simply unfolds and locks into position providing a robust work platform with two platform heights. A hinged sloping ladder slides out for easy access and integral outriggers provide additional stability. Key Features • Two Platform Heights • One piece design, no components to lose or forget • Integral ladder and outriggers • Compact fully-folding flat pack design • One man assembly within seconds • Lightweight and easy to transport • 2005 WAHR Compliant >>>
    View the product on uprighteuro.com UpRight International
    BRASS WIRE - ADVANCE BRUSH

    BRASS WIRE - ADVANCE BRUSH
    ADVANCE BRUSH offers a complete range power brushes for Industrial use, including Wheel, End, Cup, Shaft Mount, and Tube brushes. Featuring M-BRAD™ Nylon Abrasive filament wheels, cup, disc brushes and more. Advance manufactures a complete range of individual filament, crimped wire wheels for individual or gang-mounted use. Features include heavy fill density for more wire points, which means more brushing action and longer life; oil tempered, industrial quality wire, and uniform wire disbursement for optimal balance and finish. Choose from Narrow, Medium and Wide Face models, with an additional selection of wheels manufactured exclusively for bench and pedestal grinders. These small diameter Advance wire wheel brushes are designed for use in restricted or hard-to-reach areas. They are excellent tools ford burring, blending, and cleaning of surfaces. Advance Tube Center small crimped wire wheels manufactured with Brass wire. >>>
    View the product on pferd.com/language/france/index.htm Pferd
    1.8 MM SIMPLEX CABLE

    1.8 MM SIMPLEX CABLE
    1.8 mm Simplex Cable GORE™ 1.8 mm Simplex Cable offers an exceptional balance of properties and is the choice of engineers when they need additional ruggedness but do not want to sacrifice size or weight. Like the 1.2 mm simplex cable, the 1.8 mm simplex cable has been proven in major aerospace programs and features the expanded PTFE buffer, extruded jackets, and a high strength braid. The 1.8 mm design is compatible with standard aerospace connectors including Deutsch MC5, Radiall Luxcis, and MIL-T-29504 contacts. >>>
    View the product on gore.com WL Gore Associates UK Ltd
    AFM SYSTEMS

    AFM SYSTEMS
    Vector Series abrasive flow machines have been redesigned through a joint effort between Extrude Hone Corporation and its customers. Over three hundred existing machine customers were contacted to provide input concerning a new machine design. The customers were asked for suggestions concerning machine operation, ease of maintenance, ergonomics and safety. The result is an extremely flexible Vector series that is capable of polishing large extrusion and forming dies, multiple workpieces at one time, and production deburring. The working tabletop has been lowered and enlarged, to accommodate bulky and heavy components. The abrasive media cylinders can be provided in sizes ranging from a 4 inch diameter to 12 inch diameter. The Vector and the Vector HP offer a choice of pressure ranges to meet specific production requirements. A standard feature on the Vector series is a touch screen operator interface terminal which simplifies all machine functions in both an automatic or manual mode. >>>
    View the product on extrudehone-vmb.de EXTRUDE HONE VMB Groupe - Extrude Hone
    KADIA MULTI-STONE HONING TOOLS

    KADIA MULTI-STONE HONING TOOLS
    In this tool type, up to twelve honing stones are fed outwards to remove the material and center the tool body in the bore. Available as 2 or 4-stone honing tools for bores from 5 mm diameter, 10 or 12-stone honing tools up to 200 mm diameter and in special tool lengths up to 1000 mm, as well as in double expansion versions for pre-honing and finish-honing within a single tool. * High material removal and perfect surface finish for large bores * Versions available for both through holes and blind holes * Possibility of pneumatic diameter gaging with the tool during the machining process. >>>
    View the product on kadia.de KADIA Production
    FLAT-BELT BRUSHES

    FLAT-BELT BRUSHES
    We can produce flat-belt brushes in any length requested, open ended or endless. They are mainly equipped with natural hairs or bristles, plant fibres or synthetic bristles. Depending on the fill material a brush surface from very soft to very hard can be obtained. As belt qualities we supply the multilayered types 5,8 mm or 7,0 mm (belt thickness) with a cover sheet and running surface made of chrome leather and an integrated polyamide insert. They are suitable for temperatures from -15°C to +80°C. When using endless closed belts, belt pre-tension is an important factor. For our types 4,8 mm to 9,5 mm we normally use a belt pre-tension of 1,5 to 2% of the distance between the pulleys (a). In order to obtain this we recommend that an adjustment device (such as a slot) is used with an adjustment range of 5% of the distance between the pulleys (a). >>>
    View the product on kullen.de KULLEN
    BACKCHAMFER TOOLING SYSTEM

    BACKCHAMFER TOOLING SYSTEM
    Equally at home on CNC or conventional machines, the backchamfer system is simple to operate and to set. It can backchamfer/deburr, or internally recess holes in a wide range of engineering components and materials. The system relies on its own built-in accuracy which is independant of machine quality. The normal diameter range is 4mm - 20mm and hole depths of up to 65mm. Cutters are supplied in: M2 high speed steel, A.S.P.30 powder metallurgy high speed steel and Tungsten carbide. >>>
    View the product on pentad.net Pentad Engineering Limited
    DOUBLE SWORD BRUSH DSH 46

    DOUBLE SWORD BRUSH DSH 46
    Features: Double sided cleaning 2 linear brushes Quadro, wiping edge to edge Mechanical height adjustment, both Sword Brushes may be adjusted individually and in a parallel way Pressure rollers at the infeed and at the outfeed Protective cover for height adjustment Mounting brackets to integrate machine at roller conveyor Options: Electrical height adjustment Ingromat™ regulator and filter unit with flow meter Suitable for the claning of: Boards >>>
    View the product on wandres.com Wandres
    LOCATING BUSHES - EH 2240

    LOCATING BUSHES - EH 2240
    Locating Bushes, for single-acting ball lock pins Note: Locating bushes are used for quick and safe locating of single-acting ball lock pins EH 2237. and EH 2238. and socket pins EH 2240. Features: • optimized centering due to precise collar (e.g. quick fixing of plates and components) • easy and process-safe assembly • easily incorporable into different materials • can be used in thin-walled pieces and in blind holes • corrosion-resistant • abrasion-resistant • application from both sides. Material: Stainless steel 1.4305 >>>
    View the product on halder.de HALDER
    DEBURRING - MORE FROM PICCO

    DEBURRING - MORE FROM PICCO
    Slot & Keyway GenerationPicco have taken what is regarded as the more accurate approach to milling such a simple but function critical thing as a slot or keyway. By generating the slot using an undersized slot mill the width of the slot can be progressively enlarged to precise dimensions. With differences in climb milling and conventional milling being taken into account when programming the machinesThe Picco range consists or the FC200, FC200/C-CQ & FC 500/C-CN for which general information is given below. I you an application which you need to investigate please do not hesitate to contact us where we would happy to spec out a machine for your needs. >>>
    View the product on kumi-solutions.com Kumi Solutions Limited
    HEAT RESISTANT CONTROL CABLES

    HEAT RESISTANT CONTROL CABLES
    Application In dry or moist rooms and above average temperatures different insulation materials are used. Depending on the application the most commonly used plastics are PU, ETFE, PFA, FEP or silicon. These materials also have different characteristics concerning their elasticity. Construction Cable designs can be in accordance with VDE, MIL, BS, UL and CSA. Temperature range for different insulation materials PU – 40 °C up to + 80 °C ETFE – 90 °C up to + 135 °C (temporary up to 200 °C) FEP – 90 °C up to + 180 °C (temporary up to 200 °C) PFA – 90 °C up to + 260 °C Silicon – 50 °C up to + 180 °C Maximum temperature subject to different conductor surface bare up to 125 °C tinned up to 135 °C silver-plated up to 200 °C nickel-plated up to 260 °C >>>
    View the product on leoni-tailormadecable.com Leoni
    ULTIBURR™ 625 COMPLIANT DEBURRING TOOL

    ULTIBURR™ 625 COMPLIANT DEBURRING TOOL
    RAD's UltiBurr™ 625 Compliant Deburring Tool saves you money by increasing machine uptime, reducing scrap, and shortening robot* programming time: The compliant spindle enables the cutting bit to follow the part profile and compensate for surface irregularities without gouging the part, leaving unwanted burrs on the edge, or breaking the tip. The compliance feature of the UltiBurr™ Deburring Tool will accommodate for deviations between the robot path and tool edge so the programmers have to program fewer path points. This savings is multiplied in operations where several passes are necessary in order to achieve the desired result. The UltiBurr™ 625 Compliant Deburring Tool: Provides compliance in x, y, & z axes to accommodate for part and path variation Runs quietly and smoothly at a low 67dba Allows pneumatic adjustment so the robot program can vary the pressure against the work piece (compliance force) as desired Permits high feed rates while maintaining consistent material removal Produces minimal chatter and vibration Uses clean air (no oil) to power its turbine motor so the air can be vented directly into the environment Has 0.25" collet to accept standard, off-the-shelf industrial burrs Operating Principle The UltiBurr™ 625 Compliant Deburring Tool utilizes a suspended spindle so that its tip is freely compliant in all directions. The spindle is re-centered by the compliance air. Increasing the compliance air pressure directly increases the compliance (resistive) force applied to the air motor and the component being deburred. >>>
    View the product on robotic-accessories.com Robotic Accessories Division
    PRIMARY SCRAPER

    PRIMARY SCRAPER
    Primary Scrapers The Sensator II Primary scraper acts on the belt at the discharge drum, just after the point where the product leaves the belt. It removes the majority of troublesome fines which otherwise stick to the belt and fall under the conveyor as spillage. A very high proportion of carryback is now immediately returned to the main material flow. The standard blade is constructed of polyurethane segments mounted on a supporting beam. When working in conjunction with the Sensator II Secondary Scraper, almost 100% cleaning efficiency is achieved. A novel torsion mount design provides a fail safe suspension system for the primary blade. This design protects from belt damage – a dangerous problem with many other primary scrapers. Should any object or belt surface defect impact upon the blades, the torsion mount allows the scraper to move away from the surface of the belt. This design allows Tungsten Carbide tipped blades to be used safely on conveyors carrying abrasive materials – providing performance, value and extended operating life. >>>
    View the product on ace-conveyor-equipment.co.uk Ace Conveyor Equipment Ltd.
    ROBOTIC DEBURRING - RC-150

    ROBOTIC DEBURRING - RC-150
    Product Advantages Ideally suited for removal of parting lines and flash on parts Quiet Turbine motor with clean air (no oil) requires less air and can be vented to atmosphere Unit also deburrs edges, significantly reduces cycle time A variety of spindle speeds are available Built-in compliance reduces robot programming Cutting force adjustable on-the-fly Mounts to robot arm on rear or side of deburring unit Utilizes standard tungsten-carbide industrial bits Minimal chattering and vibration Great replacement for hand deburring operations >>>
    View the product on ati-ia.com ATI Industrial Automation
    CONNECTORS MINI DIN

    CONNECTORS MINI DIN
    Pre-assembled with standard shielded cables lengths Moulded in strain relief Cable and overmould available in both black and beige. Shielding system designed to meet FCC requirements for EMI/RFI suppression. Designed to satisfy UL/CSA requirements for safety 500 mating cycles Withdrawal Force 4.5Kg. (10lb) Max. Insertion Force 0.45Kg (1lb) Min. Contact Retention 1.35Kg (3lb.) Min. Current rating 1 A @ 100V ac 2 A @ 12V dc Voltage rating 500V ac rms. 707V dc Contact resistance Contact - Contact 30 millliohms max. Shield - Shield 50 milliohms max. Insulation resistance 500 megohms min. @ 500V dc 100 megohms min. after humidity Operating Temperature -40°C to +70°C Shock Mil-std-202 method 213, Condition C Heat Resistance 196 hours at 100°C Salt Spray Mil-std-202, method 101D condition D Vibration Mil-std-202, method 204 Condition B Humidity Mil-std-202, method 103, 48 hours @ 90-95% RH at 40°C >>>
    View the product on cinchuk.com Cinch
    BEARING BUSHINGS

    BEARING BUSHINGS
    RoHS Directive 2002/95/EC compliant § Standard Range - Colour: White † High Performance - Colour: Blue Material: Standard Range: Engineering Polymer TEP 110 High Performance: Engineering Resin TEP 642 Tolerances: Snap-In: A: +.1/-0 L: +.4/-0 T: +0/-.13 B & C: ±.4 Flange: A: +.05/-0 L: +0/-.4 T: +0/-.13 B: ±.4 Information on installation, mating component design and radial load capacities is available upon request, please contact our Technical Sales Department Ideal as an alternative to sintered bronze or other metal bushings Eliminates stick-slip and metal-on-metal contact Highly versatile and simple to install Snap-in bearing designed for easy installation in thin plates Flange bearing designed to take both axial and radial loads >>>
    View the product on heyco.co.uk Heyco Ltd


    12Suivant >>Fin >
    Go to page


      Search    
     
     
     
    Search
    See all of the sector's products : Manufacturing and processes