Other positioning elements - All suppliers - elements of positioning - positioning - unit(unity) of positioning - positionneur - linear positionneur - card(map) of positioning - cartesian robot -
Search   


See all sector categories "Mechanics"

View associated products
Maintaining in position and fixing
Positioning stops
Assembly equipment
Other positioning elements
Wedges
Shock absorbers
Anti-vibration supports for machines
Roulements (translation in progress)
Linear guidance
Springs
charničre pour menuiserie (translation in progress)


Other positioning elements :

32 products Flux RSS
COMPLIANCE WRIST FM

COMPLIANCE WRIST FM

* Simplest compensation of position errors * Protects robots and assembly structures from excessive wear through the minimisation of insertion force * Prevents wedging and jamming of parts * Low cost solution * Stiffness is designed variably through different Shore hardnesses Compliance wrists are proven components which are used to compensate for tolerances in the assembly of parts and workpieces as well as the insertion of parts in machines and workpiece carriers. The standard compliance wrists (Model FM-G) are used with small payloads and slow moving sequences. The installation of two overload bolts (Model FM-Ü) limits oscillations when travelling. Further advantages are obtained with locking and torsion protection: With shorter cycle times and higher handling speeds as well as with all insertion operations which take place horizontially, the compliance wrist should be equipped with a pneumatic cylinder (Model FM-P). The compliance can be locked with the integrated pneumatic cylinder when travelling. The installation of a torsion protection is necessary for transmission of torsion mements and when inertial forces lead to torsion moments with rotation and swivel movements. The FM with a torsion protection is especially wellsuited for precision work with transition and press fitting (Model FM-V). * Compliance can be locked with the integrated pneumatic cylinder * Torsion protection prevents rotation about the axis of insertion >>>
View the product on ipr-worldwide.de IPR
STANDARD MAINTENANCE CHARGE

STANDARD MAINTENANCE CHARGE

The Installer shall make 1 preventative maintenance visits during each 12 month period during the Maintenance Contract Period for the sum of Ł plus V.A.T., payable annually in advance. This includes access to the Installer's 24 hour emergency call out and service, but excludes the cost of any corrective maintenance which will be charged on a time and materials basis, unless materials are provided free of charge under initial Guarantee - see Condition 7. It does not include repairs due to burglary, accidental or wilful damage (other than by the Installer or his employees) environmental causes, user error or any other cause other than fair wear and tear. >>>
View the product on ceasystems.co.uk/ CEA Systems Ltd
ALUMINUM EXTRUSION PIL1020

ALUMINUM EXTRUSION PIL1020

Application: very heavy duty machine building, e.g. - machine Frames - room and platform construction - as the base for linear motion systems - cranes and lifting machines - assembly lines Please complete the ordering code with length (xxxx) in mm (four digits, no decimals). Technical data: Material: anodized aluminum EN AW-6060 T66 Wx : 218,1 cm3 Wy: 131,8 cm3 Ix : 2181,0 cm4 Iy: 659,0 cm4 It: 794 cm4 >>>
View the product on robotunits.com HERON ROBOTUNITS Groupe - Heron Robounits
CP GROUND RACKS (KRGCP<F><D>)

CP GROUND RACKS (KRGCP)

Characteristics KHK stock CP racks and pinions are suitable in applications where very accurate positioning in linear motion is required. For your convenience, we offer circular pitches of 2.5 to 20mm and in lengths of 100 to 2000mm. (FRCP is available to 4000mm) About CP Racks & Pinions The reference pitch of a metric module is computed by multiplying the number of module by p (3.14159). For example, the reference pitch of m3 rack is 9.425mm (3×p). When using a rack and a pinion in a linear motion application, the fact that the pitch is not an integral number presents a difficulty in accurate positioning. This problem is solved by CP racks and pinions where one rotation of a pinion moves it precisely 50, 100, 150, … or 600mm. The difference in movement of one rotation of a 30 tooth CP10 vs. SS3 spur gear is illustrated on the right. >>>
View the product on khkgears.co.jp/en/ KHK
FILM POSITIONING SYSTEM - CCS160

FILM POSITIONING SYSTEM - CCS160

The Cortex CCS160 Film positioner enables standard high speed 16mm cine film to be positioned to high accuracy under a standard microscope and video camera. The film can be positioned, independent of the frame, by remote computer. The CCS160 is ideal for fast, accurate film positioning prior to video digitisation using the customer's own microscope and image analysis software.Accepts 100ft reels of 16mm film. Positions to 0.00018 inches. Use with most microscopes. Full RS232 control of film position. Low cost flexible system. >>>
View the product on cortexcontrollers.com Cortex Controllers Ltd
FLAT PRESSINGS & CLIPS

FLAT PRESSINGS & CLIPS

Emmotts has built an enviable reputation in this field; which is amply demonstrated by their market share. The extensive range of standard tooling which Emmotts maintains often means their specialist tooling is not required for short run work . In conjunction with this , Emmotts has an `in-house' tooling facility to ensure the economical production of high volume work. Materials range from mild a stainless steel, through to copper and nicol alloys >>>
View the product on emmottsprings.co.uk George Emmott
WG OFFSET PIVOT GUIDE

WG OFFSET PIVOT GUIDE

Offset pivot web guides are the ideal solution and the system we recommend most for web guiding. They are designed with a basic framework on which a second mobile framework is attached with rollers. The mobile framework rotates on a pivot point in order to find the rotation centre. In addition to the pivot point, in order not to overstretch the material, it is also necessary to apply enough tension to the web to create a gripping effect on the rollers which move the web, and is improved by coating the rollers with cork or some other special material. >>>
View the product on re-spa.com Re Spa
ELECTRONIC HAND WHEEL EHL POSITIONING

ELECTRONIC HAND WHEEL EHL POSITIONING

The electronic hand wheel EHL is a low-cost alternative to the traditional positioning by a hand wheel. Special ranges of application are the setting up of linear components in dangerous areas and the operation of hardly accessible machines. The device is controlled by a simple key control or optionally available with revolution regulator. It is completed with the integrated 230 V transformer or comes as 24 V variant for integration in machine control systems. >>>
View the product on rk-online.de RK Rose+Krieger Groupe - Phoenix Mecano
HALL SENSOR FOR POSITIONING WITHOUT ENCODER

HALL SENSOR FOR POSITIONING WITHOUT ENCODER

The HALL Sensor is the ideal alternative in positioning processes where cost-effective and accurate linear motor movements are required. The HALL Sensor enables the user to replace optical or magnetic encoders by simply mounting the reading head on the coil unit surface. The Second Generation HALL Sensor realizes a maximum accuracy of 100 µm with a repeatable accuracy brought up to a level of ~30 µm and a resolution down to 5 µm. The robustly built Second Generation HALL Sensor uses the magnet track as the linear scale and can easily be mounted on Tecnotion's widely used TM, TL, TB and TG iron core motors. >>>
View the product on tecnotion.nl Tecnotion
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Mechanics