Other dimensional measuring devices - All suppliers - Other dimensional measurements(measures) - dimensional measure - measure bidimensionelle - measure 2D - measure length - measure breadth - geometric m
Search   


  • Measuring devices, analysis and sensors > Instrumentation de dimensionnement (translation in progress) > Dimensional measuring devices > Thickness measurements
  • Measuring devices, analysis and sensors > Instrumentation de dimensionnement (translation in progress) > Dimensional measuring devices > Mesures de longueurs (translation in progress)
  • Measuring devices, analysis and sensors > Instrumentation de dimensionnement (translation in progress) > Dimensional measuring devices > Diameter measuring devices
  • Measuring devices, analysis and sensors > Instrumentation de dimensionnement (translation in progress) > Dimensional measuring devices > Three-dimensional measuring machines
  • Measuring devices, analysis and sensors > Instrumentation de dimensionnement (translation in progress) > Dimensional measuring devices > Volume measuring devices
  • Measuring devices, analysis and sensors > Instrumentation de dimensionnement (translation in progress) > Dimensional measuring devices > Measurement sensors
  • Measuring devices, analysis and sensors > Instrumentation de dimensionnement (translation in progress) > Dimensional measuring devices > Profilometry
  • Measuring devices, analysis and sensors > Instrumentation de dimensionnement (translation in progress) > Dimensional measuring devices > Measurement accessories

See all sector categories "Measuring devices, analysis and sensors"

View associated products
Dimensional measuring devices
Measurement sensors
Micrometers
Thickness measurements
Profilometry
Measurement accessories
Levels
Interferometry
Length measurers
Theodolites
Tachéomètres (translation in progress)
Measuring instrument equipment
Dial gauge for measuring
Measurement conversion frame
Mesures de longueurs (translation in progress)
Microscopes de mesure (translation in progress)
Measuring and detection scanners
Other dimensional measuring devices
Volume measuring devices
Diameter measuring devices
Three-dimensional measuring machines
3D digitizing
Capteurs d'angles (translation in progress)
Level sensors
Position and movement sensors
Time measurements


Other dimensional measuring devices :

80 products Flux RSS
LASERMILL’S MICRO-MACHINING SYSTEM

LASERMILL’S MICRO-MACHINING SYSTEM

A Turn-key Solution: The LaserMill’s solid-state YAG laser, 3-axis stages and video-microscope with zoom magnfication are completely software controlled. For prototyping, short-runs, R&D and pilot line development, the LaserMill is ready to use out of the crate. With Tangible Returns: Perform many of the same functions on the LaserMill as contract job shops offer. Save time & money consumed by out-sourcing and protect your proprietary processes. The Multi-wavelength Advantage: Change wavelengths with one click to suit the material. Cut • drill • ablate • weld • pattern • scribe • micro-channel • depassivate • direct-write • mark • mill >>>
View the product on new-wave.com New Wave Research
GANTRY CNC COORDINATE MEASURING MACHINE

GANTRY CNC COORDINATE MEASURING MACHINE

Machine Type: Gantry CNC Typical Measuring Range: 5000mm x 2500mm x 1000mm Construction: Fabricated Steel or all-granite Drive: Motorised CNC Interface: 3 Axis PCI Motion Control Card Counter Balance: Mechanical Adjustable Accuracy: U3 12+L/250 Resolution: 0.001mm Bearings: Air Bearing Porous Scaling System: Renishaw RG2 Speed: 18m per sec Acceleration: 350mm / sec / sec Probing System: Renishaw PH10 Milling Spindle: 250 watt 10,000rpm Indexable Calibration Standard: ISO 10 360 Services: Electrical 240v Single Phase >>>
View the product on itpgroup.co.uk ITP Ltd
BRIDGE - DISCOVERY II

BRIDGE - DISCOVERY II

The Discovery was designed from the ground up to be a shop floor machine. The Discovery does not require compressed air and is fitted with hard wheels – allowing the machine to be easily moved and utilised anywhere on the shop floor. Formed from advanced composite materials and riding on hardened machine tool ways, the Discovery II is a natural for the shop floor and manufacturing cells. The dampening effects of the mechanical bearings and advanced composites allow the Discovery II CMM to remain virtually unaffected by shop floor movement. It can retain its repeatability in the most inhospitable of conditions. Discovery II is the ideal solution for inspection at the point of production. >>>
View the product on hexagonmetrology.com/uk Hexagon Metrology Ltd
AIR PERMEOMETER - MODEL 4301N

AIR PERMEOMETER - MODEL 4301N

Specifications The Gurley Model 4301 Permeometer measures the porosity or air permeability of materials where air flow is an important characteristic relative to their use. These materials might be non-woven or woven textiles, filter and tissue papers, facial tissues, paper and cloth felts, some types of blotting, saturating and absorbent bag papers as well as wire meshes. The Permeometer is the standard instrument for measuring high levels of air-permeability or air-resistance as recommended in various test methods published by ASTM, TAPPI and ASA. Its unit of measurement is cubic feet of air per minute per square foot at 0.5 inches of water pressure drop. The Gurley Model 4301 is used throughout the textile and general manufacturing industries and is considered the instrument of choice due to its simplicity of loading samples, ease of use, portability and life expectancy in comparison to competitive models. Its procedure is non-destructive and its design allows the testing of long samples, up to six inches in from any edge. Features Quick & easy sample loading Rapid test cycle Excessive clamping pressure unnecessary Portable & rugged design Complies with TAPPI, ASTM, & ASA standards Applications to determine ability for material to pass air as a primary user requirement (such as parachute cloth or vacuum cleaner bags). to evaluate materials used as filters. aid in determining coolness or warmth (as insulation values) in clothing. to predict probable coating penetration. to measure retention of filters, sizing or scratch after laundering or use. to aid in prediction of water-resistant properties. to measure the effect of treatments on porosity, density, nap or other material properties. allows fast & easy quantitative measurement of variables in production not detectable by appearance or other methods. a non-destructive test to accurately delineate & quantify differences in materials and treatments. >>>
View the product on gurley.com GURLEY Precision Instruments
DISCONTINUITY ANALYZER - OP1100

DISCONTINUITY ANALYZER - OP1100

The OP1100 Discontinuity Analyzer is an off-the-shelf fiber optic test System that automatically captures, displays and logs short optical power interruptions and spikes in the accordance with EIA/TIA-FOTP-32A This test solution provides a method for testing a broad variety of passive or active fiber optic components for susceptibility to discontinuities (single dropout, transient output or transmittance fluctuations) during application of an external stimulus, such as temperature, vibration or physical shock. >>>
View the product on optotest.com OptoTest
TOPOGRAPHIC SURVEYING TOTAL STATIONS - GTS-230N SERIES

TOPOGRAPHIC SURVEYING TOTAL STATIONS - GTS-230N SERIES

Superior Basic Function for measuring distance & angle The GTS-230N Series are provided with a distance measuring range of 3,000m (9,900ft) to a single prism which is superior in their class (GTS-239N: 2,000m (6,600ft)/1 prism), while maintaining high accuracy ±(2mm+ 2ppmxD) m.s.e.(GTS-239N: ±(3mm+3ppmxD) m.s.e.). As for distance measuring time, data updates at a high rate speed of 1.2 seconds in the fine measurement mode. (0.7 seconds in the coarse mode, and 0.4 seconds in the tracking mode). This shorter distance measurement time will allow you to increase your efficiency and productivity in the field. >>>
View the product on topconeurope.com TOPCON EUROPE POSITIONING BV Groupe - TOPCON
DIMENSIONAL MEASUREMENT - FUSION FAROARM

DIMENSIONAL MEASUREMENT - FUSION FAROARM

When you want the portable measurement and reverse engineering capabilities of the Platinum FaroArm - and have flexible accuracy requirements - the cost-effective choice is the FARO's intermediate arm series, Titanium FaroArm®. The Titanium’s high precision - combined with its lightweight construction and superb portability - means that the shop floor now has an affordable solution for nearly all measurement needs. The Titanium FaroArm enables anyone, anywhere to inspect, reverse engineer or perform CAD-to-Part-analysis on parts, fixtures and assemblies with remarkable accuracy. >>>
View the product on faro.com/uk Faro UK
CUSTOM BANDPASS FILTERS

CUSTOM BANDPASS FILTERS

Diameter tolerance: +0 / -0.25mm Usable aperture: Size Aperture 12.5mm Ø 9.0mm Ø 25.0mm Ø 21.0mm Ø 50.0mm Ø 45.0mm Ø Surface quality: 80-50 (MIL-O-13830) Out-of-band blocking: 1 x 10-4 from X-ray to specified range Maximum survival temperature range: -50°C – +70°C Humidity resistance: MIL-STD-810C, Method 507 procedure 1, modified to 7 cycles for 25mm and 50mm filters, 5 cycles for 12.5mm filters. Angle sensitivity: See equation >>>
View the product on lot-oriel.com LOT-Oriel Ltd
ALTM AIRBORNE LASER TERRAIN MAPPER

ALTM AIRBORNE LASER TERRAIN MAPPER

ALTM Airborne Laser Terrain MapperOptech's ALTM Airborne Laser Terrain Mapper Systems acquire digital elevation data with accuracies equivalent to those of GPS, but thousands of times faster. Optech Incorporated announces even greater improvements to their revolutionary ALTM Gemini: it now operates at a blazing 167 kHz laser pulse repetition frequency! Optech is the first airborne lidar manufacturer to develop, build and deliver commercial lidar systems with Multipulse technology. With up to 167 kHz laser PRF, Optech’s ALTM Gemini pushes the technology to the next level in customer-driven requirements. ALTM Gemini retains all the performance characteristics of the ALTM 3100EA but offers a 62% increase in data coverage and effective collection rate over every other commercial lidar system in the world. With the 167 kHz enhancement, the ALTM Gemini clearly demonstrates superior performance at virtually all altitudes, and reinforces Optech’s leadership position in the global lidar marketplace, both in product innovation and scientific development. To complement this ground-breaking advance in technology, Optech is also introducing DASHMap processing software, the next generation in lidar data processing solutions with a vastly accelerated data acquisition-to-processing ratio. DASHMap supports the ALTM Gemini’s new laser speeds and enables ALTM Gemini owners to maximize both flight operations and post-processing. The Gemini is the most recent member of the ever growing ALTM family, complimenting the ALTM 3100EA. While maintaining the full performance characteristics of the ALTM 3100EA, the Gemini offers higher altitude operation at its peak repetition rates. A user can now operate 100 kHz laser rep rates from altitudes up to 2 km. Other modes of operation have similarly enhanced performance ranges. This greatly improves the survey efficiency of the ALTM by more than doubling the area coverage rate. >>>
View the product on optech.on.ca Optech
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Measuring devices, analysis and sensors