Musical instruments: suppliers, wholesalers and manufacturers on Hellopro
Search   


Musical instruments :

70 products
Select the category
    Selection of 40 products among 70
    MPM 5/170 I-AC/H WELDER

    MPM 5/170 I-AC/H WELDER
    Petrol Engine Driven Welder/Generator Delivers 170A of AC weld output Single phase auxiliary power available Weld Output Rated Output @ 35% Duty Cycle 170 A - 25 V Rated Output @ 60% Duty Cycle 150 A - 25 V Output Range 40A ÷ 170A Open Circuit Voltage 60 V Generator Single Phase Output 4 kVA - 230 V Frequency 50 Hz Engine Make/Type Honda GX 270 OHV Power and Speed 9 HP @ 3000 rpm Cylinders 1 Displacement 270 cc Noise Level LWA 95 (70dB at 7m) Dimensions L x W x H 720 x 480 x 515 mm Net Weight 85 kg >>>
    View the product on genset.it Genset Groupe - Thermadyne
    STUD WELDER BMH 22I

    STUD WELDER BMH 22I
    The new BMH-22i inverter stud welder is a multifunctional High-Tech development perfectly suitable for stud welding, electrode welding and TIG welding. Its performance and quality features are unequalled in stud welding technology. The lightweight stud welder in compact design allows the safe and problem-free welding of studs up to M24 (7/8“). This stud welder has only one fifth the weight of comparable stud welders and features high technical performance due to an extremely steady arc. The adjustability of all important welding parameters and easy operation via membrane keyboard with display allow optimum technical comfort and first-rate welding results. >>>
    View the product on soyer.com Soyer
    ALUMIG 99,5 WELDING ACCESSORIES

    ALUMIG 99,5 WELDING ACCESSORIES
    ############################################################################################################################################################################################################################################################### >>>
    View the product on itw-welding.com Miller Groupe - ITW Welding
    CONVERTER - TYPE SE26/20VK

    CONVERTER - TYPE SE26/20VK
    For ultrasonic joining tasks in the hightech range, such as data carrier diskettes. electronic and medical engineering components, but also at 500 W multiconverter applications with low welding pressure, it is advantageous for converters with adjustable spring force to be used. On striking the workpiece the sonotrode catches slightly with a spring, whereupon the welding pressure is generated by a pretensioned pressure spring. Since the actual feed motion must always by provided by an external feed unit, this converter type with variable spring force is a passive feed unit. The spring-loaded converters can be mounted individually or in a multiconverter configuration with appropriate mounting adapters on all the pneumatic ultrasonic welding presses and feeders of the USP or USV series. >>>
    View the product on telsonic.com Telsonic (UK) Ltd
    GO-FER III KITS - STRAIGHT LINE WELDING

    GO-FER III KITS - STRAIGHT LINE WELDING
    These versatile GO-FER III Kits make straight line welding and cutting more efficient and economical. Produce machine quality welds and cuts in any plane or position with a portable drive on magnetic track. Kits are available in specific configurations and are an affordable solution for welding, plasma or oxy-fuel cutting. The kits come complete with a drive, torch holder, 8 foot rail and on/off magnet assemblies. Additional sections of rail, a radius cutting attachment and vacuum cups for non-ferrous applications are also available. >>>
    View the product on bugo.com BUG-O Systems
    HF PROFILE AND TUBE WELDING UNITS

    HF PROFILE AND TUBE WELDING UNITS
    Easy tubular pipes can also be manufactured by DREISTERN tube welding installations. Its true strong points may however be evidenced by demanding tasks. Should you, for instance, have to produce stainless steel tubes of outstanding quality or contoured tubes with complex cross-sections, then you ought to consult our specialists. Good solutions are seldom exclusively a question of modern plant components. Convincing concepts originate from dialogues between the users and the machine manufacturer. DREISTERN guarantees you a competent, experienced team. Hardly any DREISTERN machine is like another. They are as varied as our customers and their requirements. Perhaps that is what makes them so successful. >>>
    View the product on dreistern.com DREISTERN
    WELDING

    WELDING
    We are specialists in stainless steel and aluminium welding and operate 5 dedicated welding bays. + Mig Welding + Tig Welding + Spot WeldingQuality: We carry out welding to a high standard with full inspection.Mig & Tig: We are specialists in aluminium and stainless steel welding for a range of industries including electronics, food and medical.Spot Welding: We carry out standard spot welding as well as complex spot welding of mixed material and material of different sizes.Jigs & Fixtures: We manufacture all our jigs & fixtures inhouse catering for fabrication work upto 4m3 and 500kg. >>>
    View the product on contractsengineering.co.uk Contracts Engineering Ltd
    MPM 5/170 I-CX/H WELDER

    MPM 5/170 I-CX/H WELDER

    Petrol Engine Driven Welder/Generator Delivers 170A of DC weld output Three-phase and Single-phase auxiliary power available Weld Output Rated Output @ 35% Duty Cycle 170 A - 27 V Rated Output @ 60% Duty Cycle 140 A - 26 V Output Range 40A ÷ 170A Open Circuit Voltage 90 V Generator Three Phase Output 4.5 kVA - 400 V Single Phase Output 3 kVA - 230 V Frequency 50 Hz Engine Make/Type Honda GX 270 OHV Power and Speed 9 HP @ 3000 rpm >>>
    View the product on genset.it Genset Groupe - Thermadyne
    AUTO AXCESS 450 WELDING

    AUTO AXCESS 450 WELDING
    ############################################################################################################################################################################################################################################################### >>>
    View the product on itw-welding.com Miller Groupe - ITW Welding
    ACCESSORIES - TIMER LIFE

    ACCESSORIES - TIMER LIFE
    Usable to get a safe and faster verification of a failure due to wrong usage of the machine. The system can transfer to the host adapter the following information stored in the machine core: 1. on-time: the sum of the times the welder was powered 2. working-time: the sum of the times the machine was welding 3. thermal-lockout counter: counts the number of times the overheat switched off the machine due to too high internal temperature 4. overvoltage counter: counts the number of times the welder was disconnected from mains due to overvoltage power supply. >>>
    View the product on weldingbox.com RD Ricerca e Distribuzione
    ROLLFORMING MACHINES FOR MEDIUM SIZE TO HEAVY PROFILES

    ROLLFORMING MACHINES FOR MEDIUM SIZE TO HEAVY PROFILES
    The P3 series has a eminant reputation among DREISTERN customers. The five models in the P3 series offer outstanding cost-effectiveness. Thanks to the numerous equipment variations, the right solution can be found for each requirement. According to the tooling changeover frequency, a suitable quick changeover system is put into action. Equipped with computer driven pre- and post-punching units, these rollforming machines can manufacture finished profiles. Contoured tubes are also possible by means of additional HF welding equipment. It is no wonder that hardly any profile producer today wishes to do without this multi-talented machine. >>>
    View the product on dreistern.com DREISTERN
    MPM 5/180 I-D/AE-Y WELDER

    MPM 5/180 I-D/AE-Y WELDER
    Diesel Engine Driven Welder/Generator Delivers 170A of DC weld output Three-phase and Single-phase auxiliary power available Weld Output Rated Output @ 35% Duty Cycle 170 A - 27 V Rated Output @ 60% Duty Cycle 140 A - 26 V Output Range 40A ÷ 170A Open Circuit Voltage 90 V Generator Three Phase Output 5 kVA - 400 V Single Phase Output 4 kVA - 230 V Frequency 50 Hz Engine Make/Type Yanmar L100 AE Power and Speed 10 HP @ 3000 rpm >>>
    View the product on genset.it Genset Groupe - Thermadyne
    STUD WELDER BMH 30I

    STUD WELDER BMH 30I
    The new BMH-30i inverter stud welder is a multifunctional high-tech development perfectly suitable for stud welding, electrode welding and TIG welding. Its performance and quality features are unequalled in stud welding technology. The lightweight stud welder in compact design allows reliable welding of studs up to M24 (1“) without any difficulty. This stud welder has only approx. one-third the weight of comparable stud welders and features high technical performance due to an extremely steady arc. The adjustability of all important welding parameters and user guidance via membrane keyboard with digital display allow optimal ease of use and first-rate welding results. >>>
    View the product on soyer.com Soyer
    AXCESS 450 WELDING ACCESSORIES

    AXCESS 450 WELDING ACCESSORIES
    ############################################################################################################################################################################################################################################################### >>>
    View the product on itw-welding.com Miller Groupe - ITW Welding
    PLASTIC WELDING - INTEGRATED POWER ACTUATOR - IPA 3505

    PLASTIC WELDING - INTEGRATED POWER ACTUATOR - IPA 3505
    TELSONIC exclusively introduces the innovative, brand new IPA 3505 actuator unit with integrated generator. This unit can be operated in welding machines, opens entirely new possibilities to the users and offers various advantages for conception, building and production. With the new IPA 3505 TELSONIC continues to introduce new innovative ultrasonic components for the plastic processing industry. The advantages for the end-users and machine builders are always at the forefront of our efforts. >>>
    View the product on telsonic.com Telsonic (UK) Ltd
    MODULAR DRIVE SYSTEM - ACCURATE WELDS

    MODULAR DRIVE SYSTEM - ACCURATE WELDS
    The Modular Drive System is the only product in the industry that allows the user to configure one machine for various automated applications, now and in the future. The MDS produces precise, accurate cuts and welds. The Master Drive Unit has a high torque, low inertia motor for precise stops and starts and a dedicated fail-safe brake with three times the stopping and holding power of the motor. The unit is equipped with motor overload protection which turns the motor off and engages the brake whenever an excessive load is placed on the machine. In addition, the Master Drive features closed loop speed control for adjustable, repeatable control of critical welding or cutting parameters, and closed loop position control to prevent creep. >>>
    View the product on bugo.com BUG-O Systems
    COMPACT WELDING SYSTEM MASK

    COMPACT WELDING SYSTEM MASK
    1 - GLASS PANES Both the inactinic DIN 11 and the protection transparent glass are certified by their producer. Their large Size (90x110 mm) allows greater visibility than currently available masks do. 2 - FRAME The frame can be removed to clean the slide cleaning and replace the glass panes. 3 - DOOR Protecting both glass panes from any accidental impact. 4 - STANDOFFS They are directly molded to prevent damage whenever the mask is laid down. >>>
    View the product on weldingbox.com RD Ricerca e Distribuzione
    MPM 5/180 I-EL/H WELDER

    MPM 5/180 I-EL/H WELDER
    Petrol Engine Driven Welder/Generator Delivers 180A of DC weld output Stepless Current Control Three-phase and Single phase auxiliary power available Weld Output Rated Output @ 35% Duty Cycle 180 A - 27 V Rated Output @ 60% Duty Cycle 150 A - 26 V Output Range 30A ÷ 180A Open Circuit Voltage 70 V Generator Three Phase Output 5 kVA - 400 V Single Phase Output 4 kVA - 230 V Frequency 50 Hz Engine Make/Type Honda GX 340 OHV Power and Speed 11 HP @ 3000 rpm >>>
    View the product on genset.it Genset Groupe - Thermadyne
    TRAC-BUG - PLATE CUTTING AND WELDING

    TRAC-BUG - PLATE CUTTING AND WELDING
    The Trac-Bug is a compact friction drive cutting machine that will ride on any standard 6" (152 mm) V-grooved track. A solid-state variable speed control allows the Trac-Bug to travel and carry a torch at precise speeds producing a machined quality cut or bevel. Plate cutting and welding preparation can now be done quickly and with a high degree of precision. Quality bevels produced with the Trac-Bug reduce fit up and grinding time and lay a foundation for a stronger weld. The Trac-Bug is available in two standard configurations, for Oxy-fuel cutting TRB-1000 and for Plasma cutting TRB-1500. Each version is equipped with a 22-7/8" (581mm) geared rack for 1-3/" (47.6 mm) diameter machine torch holder that will accommodate a 32 pitch rack. >>>
    View the product on bugo.com BUG-O Systems




      Search    
     
     
     
    Search
    See all of the sector's products : Leisure - Tourism - Well-being