Motors and accessories: suppliers, wholesalers and manufacturers on Hellopro
Search   


Motors and accessories :

1337 products
Select the category
Selection of 120 products among 1337
SPRING BRAKE ACTUATOR SYSTEM

SPRING BRAKE ACTUATOR SYSTEM
RACO´s Spring Brake Actuator System - The safe solution RACO’s spring energy loaded brake systems account for a maximum security. These units are working simply as an electro mechanical device and, therefore, are particularly suitable for the use in light rail vehicles. The brake operation is absolutely smooth without any jerking. Environmental conditions such as freezing or ice up of the brake system can not occur based on the electro mechanical design. Spring energy loaded brake systems from RACO are used for final deceleration, parking, emergency and as auxiliary or secondary safety brakes. The inherent fail safe design will activate the brake and stop the vehicle even if the electrical power supply fails. >>>
View the product on raco.de RACO
BREDEL SPX DUPLEX

BREDEL SPX DUPLEX
Features • extremely small footprint • improved pulsation behaviour • ‘in line’ configuration optional • standard IEC or NEMA electric motor • direct coupled instead of close coupled • sealless • dry running capability • leak free; contamination free • abrasive, viscous, corrosive and shear sensitive liquids • low cost of ownership • precision machined hoses • 16 bar, max. 80 m3/hr >>>
View the product on watson-marlow.com Watson-Marlow
BRUSHLESS DC MOTOR BG 31

BRUSHLESS DC MOTOR BG 31
• Highly dynamic 3-phase EC motor • With integral commutation electronics as standard • Fitted with 4-pole neodymium magnet and preset direction of rotation (cw or ccw) • Reverse-pole protection is incorporated as standard • In combination with BGE 3004 control electronics, can be controlled in both directions of rotation • The standard version has leads. In combination with Electronics BGE 3004, an 8-pin socket can be provided on the motor for supply and control purposes >>>
View the product on dunkermotoren.de Alcatel Dunkermotoren Groupe - Alcatel
STEPPER MOTOR DRIVER - AMIS-30522

STEPPER MOTOR DRIVER - AMIS-30522
Description The AMIS-30522 is a micro-stepping stepper motor driver for bipolar stepper motors. The IC can be interfaced via I/O pins and the SPI bus to an external microcontroller. The AMIS-30522 contains a current translation table and takes the next micro-step on every rising (or falling) edge of the signal on the NXT input pin. The DIR register or input pin defines the direction of rotation. The IC provides a speed and load angle output signal. This in turn enables running on the external microcontroller stall detection algorithms and control loops based on load angle, and to adjust torque and speed accordingly. AMIS-30522 uses a proprietary PWM algorithm for reliable current control. Additionally, the AMIS-30522 has an on-chip voltage regulator, reset output and watchdog reset. The AMIS-30522 is implemented in AMIS I2T100 technology, combining both high-voltage analog circuitry and digital functionality on the same IC. The IC complies with automotive requirements. AMIS-30522 is available in SOIC-EP-24 (exposed pad) as well as the compact, thermally enhanced 7x7 NQFP-32. Features Motor Driver Dual H-Bridge for 2-phase stepper motors Programmable peak-currents, up to 1.6A in 32 steps On-chip current translator converting consecutive steps to the corresponding coil currents Seven step modes ranging from full-step to micro-steps: full, 1/2, 1/2 compensated, 1/4, 1/8, 1/16, 1/32 Fully integrated current-sensing PWM current control with automated selection of fast and slow decay Active fly-back diodes On-chip temperature sensing Protection Full output protection and diagnostics Thermal warning and shutdown Over-voltage protection Interface Compatible with 5V and 3.3V microcontrollers 3-wire SPI serial interface Next step input Motion direction input Speed and load angle output Integrated Power Regulator On-chip 5V/50mA voltage regulator Reset output Watchdog reset EMI Compatibility Low EMC PWM Programmable voltage slopes, four options Programmable PWM frequencies, two options Top of page Applications Intelligent Positioning and Dynamic Motion of Surveillance Cameras and Spotlights Dose Pumps Vending Machines Pick-and-Place Machines Automotive Headlight Position Dynamic Motion of Weaving and Sewing Equipment Flap/valve Control in Climate Control Facilities >>>
View the product on amis.com Amis
SINGLE-PHASE MOTOR - ODP (IP22)

SINGLE-PHASE MOTOR - ODP (IP22)
General Purpose Motors : Single-Phase Motors : ODP (IP22) Description Starting capacitors, cast iron frames, rigid base and oversized ball bearings to ensure extended motor life are all standard features. Remember to considered ambient temperatures and that ODP are suitable where dirt and moisture are at minimum. Applications Pumps Fans Conveyors Blowers Air compressors Refrigeration equipment Industrial equipment Milling machines Tools Farm equipment Aeration equipment Other moderate-to-high starting torque applications. Standard Features Single-phase, II, IV and VI pole, 60Hz Squirrel cage rotor / Aluminum die cast NEMA dimensions Ball bearings Insulation Class ?F? High starting torque Continuous Duty (S1) 104ºF (40ºC) ambient temperature Altitude: 3300 ft (1000m) 1045 carbon steel shaft F1 mounting T-Box NPT threaded terminal box Stainless steel nameplate Paint: Enamel alkyd resin base Color: RAL 7022 ? Dark Gray Service Factor : 1.25 (ODP only) 143/5T steel plate frames 182T up to 215T cast iron frames Service factor: 1.15 Automatic drain plugs V-ring slingers on both endshields Optional Features Special Voltages and frequency Stainless steel shaft C and D flanges available for all frames F2 mount >>>
View the product on arfonrewinds.com Arfon Rewinds Ltd.
AC AND DC MOTOR

AC AND DC MOTOR
Specialist AC and DC motors for surface and submersible applications See also Astrosyn’s design, manufacturing and support capability has been developed for an extended range of AC and DC special-duty electric motors to meet the most stringent Naval Engineering Standards. The resultant performance parameters frequently apply directly to complex commercial projects... Ultra low vibration Shock protection Submersible operation Weather resistance EMC compliance Temperature extremes Magnetic field compensation Flame proofing Electrical noise reduction Special-duty AC Motors Specialist ac motors are used to power a range of critical marine and submarine services including pumps, compressors, fans, bow thrusters, sonar and radar systems. Power ratings span a range up to 750kW. Submersible applications include sewage and waste water pumping, dredging, deep well sinking and offshore drilling platforms. Special-duty shock resistant AC motors type 43 AC motors to meet naval requirements for equipment emitting low noise & vibration spectra Capable of withstanding mild shock to 30g in all directions Available in IEC frame sizes from 56 to 400L Standard range constructed with winding insulation class F Minimum housing protection IP44. High shock tolerant AC motors type 50 High shock level tolerance Compliant with the NSSII naval standard All type 50 AC motor housings are made from nodular cast iron type 60 Incorporates low-mass high shock resistant design Particularly applicable to pumping applications which benefit from close coupling of the motor to the equipment being driven. Extreme shock tolerant AC motors t ype 48 Features a steel welded housing Performance levels combine ultra low noise and vibration with extreme shock tolerance. This range is also available flame proofed to Eexde (Zone 1), suitable for operation in hazardous environments Submersible AC Motors Astrosyn's submersible AC motors are designed for continuous or intermittent immersion, with capability for surface or forced cooling and various seal options. Typical applications include... Deep well sinking Dredging Sewage & Waste water pumping Offshore drilling platforms Surface-Cooled Submersible Motor type 55 Designed for continuous submersible operation, or operation only when submerged Available in power ratings up to 500kW and IEC frame sizes up to 450 Standard range designed with mechanical seals, lipseals or airbell construction Winding insulation classes F or H available and protection rating is up to IP68 Forced-Liquid Cooled Submersible Motor type 99 Cooling by forced liquid flow permits operation at maximum power in both submerged and dry conditions Excellent cooling enables a high output to be achieved from a small frame size. Features very low airborne noise emission Available in power ratings up to 500kW and IEC frame sizes up to 450 Winding insulation classes F or H available and protection rating is up to IP68 Low Magnetic AC Motors Astrosyn offers a range of AC motors developed to minimise strayfield magnetic and acoustic signatures. Widely used on board mine counter-measure vessels such as minehunters and minesweepers, these motors are available in protection classes from IP54 to IP68, with standard shock protection up to 60g. Two options are available for reduced strayfield emission... Low Magnetic type 53 With low magnetic materials and designed to minimise strayfield and acoustic signatures The standard range offers shock protection up to 60g Protection ratings from IP54 to IP68, and winding insulation F or H Integrated Strayfield type 54 Features strayfield compensation coils which automatically track the motor load to achieve a significantly reduced strayfield signature without the use of ferromagnetic materials or complex electronics Integrated strayfield compensated and degaussing design does not require any additional space or larger frame sizes See also dc motors Motor Refurbishment & Repair Astrosyn offer a comprehensive repair service for AC and DC motors of our own manufacture and for those originally supplied by other specialist companies. Stripdown & Survey Initial inspections (visual, mechanical and electrical) External cleaning No-load testing Disassembly Internal cleaning Inspection of subassemblies and/or parts Measurement of shaft and housing fits Report findings Basic Refurbishment Reclaiming of bearing fits (shaft and flanges) Replacement of bearings Assembly No-load testing Airborne noise measurements to NES847 Structure borne noise measurements to NES813 Touch up paint system; finishing Test report and Certificate of Conformity Major Repairs Flange machining and shaft repair Removal of old windings, rewind and varnishing Fitting new thermistors to NES requirements Replacement of armatures Skimming of rotors and stators to adjust air-gap >>>
View the product on astrosyn.com Astrosyn International Technology Plc
LINEAR MOTOR - LSE 10

LINEAR MOTOR - LSE 10
The LSE 10 motor series is characterized by high continuous forces and an extremely compact design. Due to theses features, it is ideal for use in applications in extremely confined spaces. LSE 10 linear motors are also available with water cooling for applications with maximum continuous load requirements, alternating loads or high processing forces. High velocities and accelerations Optimum start/stop characteristics Maximum dynamic response Maximum accuracy down to 2 µm (high-resolution encoder systems) Maximum guidance system precision Maximum power density due to minimum air gap (approx. 1 mm) Available with a brake as an option >>>
View the product on baumuller.com Baumuller (UK) Ltd
PACESETTER 30R AC INVERTER DUTY MOTOR MODEL 2201

PACESETTER 30R AC INVERTER DUTY MOTOR MODEL 2201
Product Features Quintsulation™ 5-stage insulation system designed to meet NEMA MG 1-1993, Section IV, Part 31. 230VAC, 60 Hz, 3-phase for operation with a wide range of inverter products. Inverter-Grade magnet wire and Class "F" insulation system for increased protection against spikes and corona damage caused by the inverter. UL recognized for construction, CSA certified, and in compliance with the Low Voltage Directive "CE". Standard Features Totally enclosed, non-ventilated IP-20 rating. Class "F" insulation system for long life. Aluminum endshields for high thermal efficiency and light weight. Permanently lubricated, noise tested ball bearings. Locked bearing design minimizes shaft endplay. Application Information Face mounting is standard. Optional Accessories Die cast terminal box kit model 5982 achieves IP-44 rating. "L" bracket kit model 5968 permits base, ceiling, and sidewall mounting. Matching Controls We stock a full line of speed controls for our Pacesetter motors. Specifications Model Number 2201 Category Three Phase, Inverter Duty, Non-Synchronous Motor Speed (rpm) 1700 Torque 35 oz-in Motor Output Power (hp) 1/17 Voltage (AC) 230 Current (amps) 0.48 Rated Frequency (Hz) 60 Variable Speed (rpm) 133-3240 Frequency Range (Hz) 10-140 Torque at 10Hz 45 Torque at 60Hz 66 Torque at Max Hz 35 Length XH (inches) 4.2 Weight (lbs) 6.2 Connection Diagram 074 10007 Motor Type 30R4BEPP >>>
View the product on bodinemtr.com BODINE ELECTRIC
THREE PHASE AC MOTOR - WP PREMIUM EFFICIENCY MOTOR

THREE PHASE AC MOTOR - WP PREMIUM EFFICIENCY MOTOR
WP Premium efficiency motor The Brook Crompton WP motor range covers products with outputs from as little as 0.75kW to 400kW in frame sizes 80 to 355L. They are suitable for use within a diverse range of applications from food and drink to china clay production. From roller table drives to refridgeration. Many applications often have adverse operating conditions including repeated starting and occasional overloading; the WP range is well suited to these situations. A virtual go anywhere motor, this cast iron range has a full 2-year guarantee. Features high efficiency for low running costs high reliability for long life low noise levels cool running for long insulation life EFF1 efficiency levels, where applicable within European efficicency labelling scheme Eurovoltage: 400v ±10% dual frequency: 50Hz and 60Hz high power factors high torque with smooth acceleration and low current ease of maintenance IP55 protection 4 position cable entry 2 year warranty >>>
View the product on brookcrompton.com Brook Crompton
SINGLERUN™ MOTOR

SINGLERUN™ MOTOR
SingleRUN™ Motor The SingleRUN™ Motor is down-hole drilling motor designed for single run use, be economical enough to be disposed, and often left in the well. They are engineered for a minimum 100 hours running life. The motors can be cemented through, and would be supplied with a rupture disc sub directly above to by-pass in the event of blockage. The motors will allow bits or mills, or reaming shoes to be rotated by pumping alone without the need to rotate the whole string as an aid to get casing strings to bottom. The planned use of the SingleRUN™ Motor may eliminate the need for a costly wiper trip prior to running the casing or liner string. The uses for sacrificial motors are numerous: Casing strings that cannot be rotated to bottom Cemented completions that cannot easily be retrieved once near bottom Sand control screens that cannot be rotated to bottom Troublesome liner installations that cannot be rotated easily Drilling into the reservoir with any of the above to avoid an extra short bit run Pre-completion well bore clean-up inside casing to drill out cement inside the casing or liner (perhaps used on 4 runs then disposed of) Remote drilling locations with no maintenance facilities available SingleRUN™ Motors include: Upper API box connection Multi-lobe, multi-stage power section Coupling with straight housing Mud-lubricated bearing assembly Output shaft with API box connection >>>
View the product on caledus.com Caledus Ltd
BRUSHED SERVO MOTOR

BRUSHED SERVO MOTOR
Our range of brushed DC servo motors are designed to satisfy the demands of a broad range of industrial applications where highly precise speed and/or positioning performance is required. Compared to brushless servo motors, the operation and control of these motors is highly simplified thus providing a significant cost saving per axis. Customer specific cable terminations as well as tachogenerators, encoders or gearboxes can be offered if required. Main features & characteristics High dynamic performance High efficiency Versatility of design and optional extras Wide range of motor sizes Most popular sizes available ex stock Cost effective design and operation >>>
View the product on cetronic.co.uk Cetronic Ltd
UNIMOTOR FM BRUSHLESS AC SERVO MOTOR

UNIMOTOR FM BRUSHLESS AC SERVO MOTOR
Unimotor FM is a high performance brushless AC servo motor range matched for use with Control Techniques drives. FM is an acronym for Flexible Motor, designed to accommodate a wide range of applications. The motors are available in six frame sizes with various mounting arrangements and motor lengths. Applications: Unimotor FM is suitable for applications where precision motion and/or dynamic control is required. Typical applications include: * High speed machinery * Flying shear and rotary knife applications * Pick and place * Materials handling * Printing * Textile machinery Benefits: * Unimotor FM allows various feedback devices to be used. As standard an incremental encoder is fitted as this offers an optimum balance of cost and performance. SinCos and SLM feedback can be selected for increased resolution and Resolver feedback is available for increased reliability in extreme environments. * High peak torque values allow smaller motors to be used where the RMS value is low but the maximum torque is high. * A wide selection of ready made cables are available for quick and easy connection to Control Techniques drives. * High inertia versions are available to allow the motor inertia to be more closely matched to the load inertia for increased performance and stability. * IP65 environmental protection is standard and ATEX protection available as an option. * Motor brakes may be integrated within the motor. A choice of parking brake or high energy dissipation brake is available. * Flexibility of the Unimotor range ensures the best fit for your application; as well as the various physical sizes and feedback devices available, options extend to the type of connectors fitted. >>>
View the product on controltechniques.com CONTROL TECHNIQUES Groupe - Emerson Industrial Automation
AC MOTOR FOR OVEN

AC MOTOR FOR OVEN
Induction asynchronous motors. The special mechanical construction of the motor permits to reduce the overall dimensions of the oven and to place the motor near the cooking room without causing damage to the motor itself. The optimization of the motor directly in the oven with the fan permits to obtain always the best performance in the ventilation to keep a uniform temperature inside the cooking room. >>>
View the product on firgroup.com FIR
SURION MANUAL MOTOR STARTER

SURION MANUAL MOTOR STARTER
Surion Manual Motor Controllers and accessories provide a global solution and supply optimum flexibility for panel design. These IEC, UL and cUL marked products may be used in a variety of applications including individual, group, or combination installations. Surion Manual Motor Controllers are rated by UL as a manual self-protected combination controller (Type E) providing branch circuit short circuit protection. Customers can select versions rated up to 63 A for use with motors to 40HP @ 460V. >>>
View the product on geindustrial.com/cwc/products?famid=35&lang=en_US GE Motor starters Groupe - GE+Energy
ELECTRIC MOTOR GE KINAMATIC EXPLOSION PROOF

ELECTRIC MOTOR GE KINAMATIC EXPLOSION PROOF
General Electric manufactures a broad range of DC explosion proof motors for both commercial and industrial applications. The standard KINAMATIC® Explosionproof (XP) motor is a totally enclosed machine with a housing constructed to contain any explosion within the motor caused by the hazardous atmosphere entering the enclosure and being ignited. An explosionproof motor prevents the equipment from triggering a general fire or explosion. >>>
View the product on geindustrial.com/cwc/products?famid=23&lang=en_US GE Motors Groupe - GE+Energy
THREE-PHASE AC MOTOR WITH INTEGRATED FREQUENCY INVERTER - VARICON

THREE-PHASE AC MOTOR WITH INTEGRATED FREQUENCY INVERTER - VARICON
The VARICON combines a three-phase AC motor with a frequency inverter. It is available for all common fieldbus systems, the default setting is optimised for general operation, drive parameters are pre-set and it is equipped with complete radio interference suppression. The VARICON - a variable speed drive in a rugged housing for versatile applications. Wherever drives need to be controlled - the motor/frequency inverter combination VARICON is the suitable solution. VARICON is available in IEC sizes in foot and/or flange mounting as 2, 4 and 6 pole motor. It meets the protection class IP54/IP55 and insulation class F for different power classes. Size 80 - 100 are available. Output powers above 3.0 kW can be covered by size 90. Up to 20,000 rpm are possible. Standard version Optimised cooling system with integrated separate fan Rotary encoder Complete radio interference suppression for compliance with the EMC guidelines Protection class IP54/IP55 Universal interface or fieldbus interface; PROFIBUS-DP (CAN open in preparation) Networking and parameter setting via RS485 interface 16 kHz chopper frequency Easy installation Options Interface adapter RS485/RS232 PC operating program (DRIVEPAR) Rotary encoder Brake resistor Holding brake Gearbox Special shaft Different terminal box covers (potentiometer, mains switch, start/stop-button, right/left-button, start/stop-button, manual/external-button) Special components for up to 30,000 rpm >>>
View the product on hanning-hew.com HANNING
SERIES KD GEARED DC MOTOR

SERIES KD GEARED DC MOTOR
The Hurst KD high efficiency DC motor is a brush type, permanent-magnet motor. With the constant flux field, the speed-torque and current-torque curves are linear, and reliability and efficiency are improved. Two leads from the motor allow simple reversing. The KD is furnished with a heavy duty integral gear unit with a wide range of reductions. Gearing is of "Heli-Spur" design with helical gears in the primary stage for quiet operation and hardened spur gears in the secondary stages. Notes: # 90Vdc is standard. Contact factory for other voltages. Motors are available with 6, 12, and 24Vdc windings. models. # All performance data based upon operation with uniform DC current. Rectified and non-filtered AC change performance values. >>>
View the product on hurstmfg.com Hurst Manufacturing Groupe - Emerson Motor Technologies
THREE PHASE AC MOTOR W NEMA

THREE PHASE AC MOTOR W NEMA
The W NEMA motor range covers products with a wide range of outputs in either 2,4,6 or 8 pole speeds and are available in either aluminium or cast iron construction.The aluminium range covers outputs from as little as 0.166HP to 30HP in frame sizes W-DA56 to W-DA286T, while the cast iron range covers outputs from 0.5HP up to 500HP in frame sizes W-DF143T to W-DF587Z .Features# high efficiency for low running costs# high reliability for long life# low noise levels# cool running for long insulation life# high power factors# high torque with smooth acceleration and low current# ease of maintenance# 4 position cable entry# TEFC washdown enclosure# 2 year warranty >>>
View the product on brookcrompton.com Invensys Brook Crompton
ITECO IT 180 SERIES DRIVE MOTOR

ITECO IT 180 SERIES DRIVE MOTOR
Standard equipment D-DE * Translation at maximum height. * Front wheel steering. * Hydrostatic transmission 2WD / 4 WD. * Mechanical wheel drive disengagement for emergency hauling. * Hydraulic self-locking differential. * Diesel motor water cooled. * Start-up battery 12V 66Ah. * Start-up battery alternator. * Manual emergency lowering device. * Proportional controls. * Diagnostic system. * Hourmeter. * Cylinders holding valves. * Manual platform extension 1.4 m. * Inclinometer with motion blocking device and alarms. * Audible motion alarm. * Mechanical scissor protection. * Rough terrain tyres extra grip 27x10.5 - 15”. * Removable control box. * Oscillating front axle. * Fold down railings. * Overload sensor. * CE – EN 280 marking. * Flashing beacons. * 220Volt cable with plug socket and safety cut-out. * Automatic hydraulic leveling jacks. Standard equipment DE * DC motor. * Traction Battery 24V 400Ah. * HF Battery charger 220V/24V-80A with automatic switch off. * Battery control system with low voltage cut-out protection. * Battery cut-out plug. * Alternator for traction battery. Optionals * Rough terrain extra grip no-marking 27x10.5 - 15”. >>>
View the product on itecolift.it ITECO Groupe - RR
VACUUM ENVIRONMENTS TORQUE MOTOR

VACUUM ENVIRONMENTS TORQUE MOTOR
NEMA 11, 1.8 degree Motor Up to 16 oz-in holding torque Vacuum Ratings from 10 Torr to 10Torr The vacuum rated motor measures a mere 1.1” square and is available in three lengths: the 211-13 is 1.24”, the 211-18 is 1.75” and the 211-20 is 1.99.” In order to make these small but powerful motors vacuum rated, Lin Engineering ensures that all of the special handling and parts necessary are used in the manufacturing process. First of all, all paint and oils are removed from the motor. Next, high temperature windings are utilized as well as Teflon leads. Lastly, depending on the rating of the vacuum environment, either no-lube stainless steel bearings or special-lube stainless steel bearings are used. During the entire manufacturing process, latex gloves are worn to ensure that no residue from human touch is left behind on the motors. All of the above special parts and handling ensure that limited outgassing and contamination will occur. >>>
View the product on linengineering.com Lin Engineering
HMV-02 VARIABLE DISPLACEMENT MOTOR

HMV-02 VARIABLE DISPLACEMENT MOTOR
HMV-02 Variable Displacement Motors. Variable displacement motors for closed and open loop operation. Product advantages – jerk-free low speed – high starting torque – large conversion range – zero angle possible – dynamic response – PTO Through-Drive Motor – compact design – high power density – high reliability – long service life Design characteristics – axial piston motor in swashplate design for high pressure closed and open loop systems – optimised starting and low speed behaviour – purge valves for circuit and case flushing optional – stepless or 2-position control – electric or hydraulic controls – superposed pressure control optional – brake pressure shut off optional – swashing to 0 cc/rev – high pressure relief valves available – through shaft with free shaft end or with coupling flange – SAE high pressure ports radial or axial – SAE mounting flange with ANSI or SAE spline shaft – plug-in version optional – speed sensor optional – double motor available Controls – H1 hydraulic stepless – H2 hydraulic 2-position – H4 hydraulic stepless Vmin=0 cc/rev – E1 electro-hydraulic stepless – E2 electro hydraulic 2-position – E4 electro hydraulic stepless Vmin=0 cc/rev – E6 as E4 with inverted shifting >>>
View the product on lindehydraulics.co.uk Linde Hydraulics Ltd
ST SERIES PIEZOELECTRIC MOTOR

ST SERIES PIEZOELECTRIC MOTOR
The ST Series Piezoelectric Motor is the smallest motor of its kind. The ST provides high resulotion motion control for linear and rotary devices in fraction of the space of traditional mechanisms. The ST is ideal for small stepping as well as continous travel, with the ability to make step increments in the tens of nanometers and the ability to operate at speeds up to 250mm/sec. >>>
View the product on nanomotion.com Nanomotion
STEPPER MOTOR POWER STAGE COMPATIBLE WITH INDUSTRIAL

STEPPER MOTOR POWER STAGE COMPATIBLE WITH INDUSTRIAL
High performance stepper motor power stage for bipolar control of 2-phase stepper motors Step resolution up to 1/20 step Setting switch for easy current selection Motor current up to 9 APEAK Supply voltage 24 bis 80 VDC Adaptable input signal logics Multi-color status LED User-friendly design for 19" sub-racks Connector compatible with the well-proved ZMP series 32-pole connector acc. to DIN 41612, type D >>>
View the product on phytron.de PHYTRON
18MM SHAFTLESS VIBRATION MOTOR

18MM SHAFTLESS VIBRATION MOTOR
18mm diameter large form shaftless vibration motor. The compact vibration unit is fully enclosed with no external moving parts and has a low profile suitable for applications requiring high vibrational amplitude with minimal space. The shaftless vibration motor features an integrated SMD noise suppression capacitor and has copper pad terminals ready to accept wiring. The motor uses an eccentric coil and oscillates radially in relation to the motor body. >>>
View the product on precisionmicrodrives.com Precision Microdrives Limited
BRUSHLESS DC MOTOR BL21EE-1.0 WATT

BRUSHLESS DC MOTOR BL21EE-1.0 WATT
The Premotec Brushless DC motors use an external rotor and an iron core stator to minimize cogging and to maximize the output torque. Supplied in an extremely compact package, Premotec brushless motors are available with or without integrated electronics. The use of high quality components ensures a motor life in excess of 20.000 hours. The torque for these motors ranges from 2.5 to 210 mNm. The speeds range from 1000 to 10.000 rpm. Below is a list of our brushless DC motor program.Output Power: 1.0 Watt Nominal Voltage: 12 Volt Nominal Torque up to: 2.5 mNm Nominal Speed up to: 5600 rpm Diameter: 21.0 mm Length: 12.0 mm >>>
View the product on premotec.com Premotec
15 SERIES DRILL MOTOR

15 SERIES DRILL MOTOR
Drill Motor for directional drills, de-gas drills, etc. Choice of eight displacements ranging from 6 in3 to 15 in3. Starting and stall torques equal to 90-94% of theoretical torque. Speed to 1,500 RPM continuous. Up to 150 HP*. Conforms to SAE 'C' mounting specification. Common drill rod thread at output end assures easy connection. Thru hole shaft with 1/2" diameter water course. Weighs 60 lbs. >>>
View the product on rineer.com RINEER
INTEGRATED MOTOR+DRIVER - IMD17

INTEGRATED MOTOR+DRIVER - IMD17
NEMA 17, 1.8º Bipolar Step Motor Operates from +12 to 24 VDC Phase current ranges from 0.35 to 2.0 Amps Peak Step Resolutions from Full, Half, 1/4, and 1/8 microsteps Optically isolated Step, Direction, and Disable/Enable Inputs Selectable Current Reduction of 33% Low Power Dissipation Efficient Current Control Thermal Shutdown, Under-voltage Protection Up to 85 oz-in (60 N-m) of Holding Torque INPUT VOLTAGE: +12 to 24 VDC (Includes Unregulated Power Supplies) DRIVE CURRENT (PER PHASE): 0.25 to 1.4 Amps RMS, 2 Amps Peak ISOLATED INPUTS: Step Clock, Direction, Enable & Disable STEP FREQUENCY (MAX): 25 kHz STEPS PER REVOLUTION (1.8 MOTOR): 200, 400, 800, 1600 >>>
View the product on rmsmotion.com RMS Technologies


123Suivant >>Fin >
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Mechanics