Miscellaneous pneumatic components: suppliers, wholesalers and manufacturers on Hellopro
Search   


Miscellaneous pneumatic components :

96 products
Select the category
    Selection of 51 products among 96
    PNEUMATIC CONTROL SYSTEMS (WITHOUT PRESSURE VESSEL)

    PNEUMATIC CONTROL SYSTEMS (WITHOUT PRESSURE VESSEL)
    * Custom manifolded systems to control Pneumatic fluids (Air, GN2, GH2, GHe, CO2, etc.) * Minimum size and weight with improved control accuracy for portable, airborne or larger instruments. * Optimized systems using a combination of custom and commercially available components integrated for highly reliable, lighter, simpler, smaller, more economical solutions. * Incorporating our custom valve design capability coupled with our knowledge of available commercial components for unique, high reliability, application specific solutions. * Design and manufacturing capabilities from prototype through high volume production orders. * Pneumatic Control Systems with pressure vessels are available: Pneumatic Control Systems (With Pressure Vessel) >>>
    View the product on aerodyne-controls.com Aerodyne Controls Groupe - CIRCOR
    SELECT PNEUMATIC SWING/PULL CLAMP 035

    SELECT PNEUMATIC SWING/PULL CLAMP 035
    StrongHold SELECT pneumatic swing/pull clamps are designed for applications not requiring hydraulic power. They are a rugged and simple design suitable for harsher applications. Double acting in threaded body or lower flange mount styles Range of sizes for maximum clamping forces from 50 to 430 lbs. Swing motions in right, left or straight guided pull Avaiable in 0, 45, 60 or 90 degrees of swing >>>
    View the product on destaco.com DE-STA-CO Groupe - DE-STA-CO
    PUSH-IN PNEUMATIC FITTINGS MADE OF PLASTIC - F100/P

    PUSH-IN PNEUMATIC FITTINGS MADE OF PLASTIC - F100/P
    Push-in pneumatic fittings made of plastic with a locking ring element made of stainless steel These are the most economical fittings: they boast the same pipe gripping system as the F100 serie (flexible stainless steel washer), but the plastic body and components make them extremely light and suitable for lighter duty uses (typically in the air sector, for pressures up to 10 bar and temperatures up to 70°C). Threads precoated with solid sealant. Suitable for pneumatic and hydraulic use. Max. working pressure: 10 bar at 20°C (for PA11 pipes). Pipes that can be used: PA6 and PA11 (nylon), PU, PE, PTFE. >>>
    View the product on olab.it Olab
    PNEUMATIC TOOL

    PNEUMATIC TOOL
    Pneumatic Tools Pneumatic Tools are ideal for use when high power is required and low running costs. Some of the Pneumatic Tools that are available are shown below. Impact Wrench - There are a wide range of impact wrenches available from a 0.5" to a 1.5" Drive. Various torque specifications are available. Pneumatic Reciprocating Saw - Air Powered reciprocating saw is ideal for remote sites and where high power is required. Available with different saw blades. Air Drill - Compact, lightweight, fully reversible functions. Collet Grinder - Available in 90 or 180 degree head. lightweight and easily maneuverable. Variable speed. Tunnel Pick - This works like a small jack hammer for breaking up roads, concrete and demolition work. Designed to minimise vibration. Needle Gun - Suitable for keying/descaling masonry, concrete or metal surfaces for painting or refinishing. Designed to minimise vibration. We Can also supply a mobile compressor for use with the pneumatic tools. There is a wide range of sizes and working pressures. >>>
    View the product on protier.co.uk Protier Lifting Services
    PNEUMATIC REFUSE SYSTEMS

    PNEUMATIC REFUSE SYSTEMS
    Pneumatic Refuse Systems are a new technology but have already realised proven benefits in several installations in Europe. The principal is the same as any Pneumatic Transport System; the ability to move the payload from a dispatch point to a collection point. With refuse this can mean moving refuse out of buildings or away from a central residential or historic centre on to a central collection area where bulk collection can be unobtrusive and with minimal disruption. Valve and storage systems permit installations to be constructed so that waste can be segregated. Pneumatic refuse systems open up the potential for the most beneficial environmental handling of waste and refuse. >>>
    View the product on quirepace.co.uk Quirepace Ltd
    PNEUMATIC POWER CHUCKS - ROTA TB

    PNEUMATIC POWER CHUCKS - ROTA TB
    The ROTA TB self-contained power chuck from SCHUNK is equipped with an integrated pneumatic cylinder. The force transmission is effected by the proven wedge hook system. The chuck contains an air supply system on the distributor ring. Therefore no rotary feed throughs are necessary. Especially on machines without hydraulic clamping cylinders, the simple interchangeability is an advantage to replace manual chucks. Versions: 3-jaw chuck / sizes 400 - 1000 mm Base jaws: Fine serration Top jaws: 1/16" x 90° / 3/32" x 90° >>>
    View the product on gb.schunk.com Schunk Intec Ltd
    PNEUMATIC CONTROL SYSTEMS (WITH PRESSURE VESSEL)

    PNEUMATIC CONTROL SYSTEMS (WITH PRESSURE VESSEL)
    # Pressurization systems for waveguides, radomes, analyzers, propulsion systems, etc. # Stored gas systems for pneumatic power and/or pressure. # Manifolded pressurization systems including: * Compressors and/or vacuum pumps. * Light weight pressure vessels wit h custom and/or commercial filters, manual valves, pressure and vacuum regulators, solenoids, actuators, transducers, pressure switches, gages, fittings, and tubing. * Custom chassis with mechanical, electrical, and pneumatic interfacing to O.E.M. equipment. # Completely assembled and tested to specific requirements. # Designs for low noise. # Designs for small size, low weight portable instrument use as well as larger equipment requirements. # Designs for long life, higher reliability and lower service life cycle costs. # Better, simpler, smaller, lighter, more economical solutions. # Design and manufacturing capabilities from prototype through high volume production orders. >>>
    View the product on aerodyne-controls.com Aerodyne Controls Groupe - CIRCOR
    PUSH-IN PNEUMATIC FITTINGS MADE OF NICKEL PLATED BRASS

    PUSH-IN PNEUMATIC FITTINGS MADE OF NICKEL PLATED BRASS
    The classic, the most popular. Robust and reliable, with a stainless steel toothed ring pipe gripping system, permitting easy pipe insertion and extraction. They can be supplied with NBR or FPM gaskets. Designed for pipes with the following external dimensions Ø 4, Ø 5, Ø 6, Ø 8, Ø 10 and Ø 12 in the straight, bend, "T", fixed cross and swivelling versions. Thanks also to the extensions, adapters and reducers, these fittings can be used to create any configuration. All the versions with a cylindrical thread have an O-Ring seal gasket behind the thread. Suitable for pneumatic and hydraulic use. Max. working pressure: from 18 bar to 20°C (for PA11 pipes). Pipes that can be used: PA6 and PA11 (nylon), PU, PE, PTFE. >>>
    View the product on olab.it Olab
    PNEUMATIC LAUNDRY SYSTEMS

    PNEUMATIC LAUNDRY SYSTEMS
    Traditionally laundry chutes are gravity only and whilst these move laundry to the lowest level of a building, further transportation is often required to deliver laundry to the point of processing or collection. Pneumatic laundry chutes can join together several stacks of laundry chute hatches throughout a building and deliver all the laundry bags to a single point. Benefits include reduced handling costs and enhanced hygiene control. Laundry is totally contained within the system between dispatch and collection. Laundry systems can be combined with refuse systems by sharing the same power plant and creating a separate and segregated tube system for refuse. Pneumatic Laundry systems are typically manufactured in 400mm and 500mm tube sizes Gravity Laundry chutes can be manufactured to order in various sizes to suit the building design >>>
    View the product on quirepace.co.uk Quirepace Ltd
    PNEUMATIC POWER CHUCKS - ROTA TP

    PNEUMATIC POWER CHUCKS - ROTA TP
    The ROTA TP self-contained power chuck from SCHUNK is equipped with an integrated pneumatic cylinder. The force transmission is effected by the proven wedge hook system. The chuck contains an air supply system on the distributor ring. Therefore no rotary feed throughs are necessary. Especially on machines without hydraulic clamping cylinders, the simple interchangeability is an advantage to replace manual chucks. Versions: 3-jaw chuck / sizes 125 - 350 mm 2-jaw chuck / sizes 125 - 350 mm Base jaws: Fine serration Top jaws: 1/16" x 90° >>>
    View the product on gb.schunk.com Schunk Intec Ltd
    PUSH-IN FITTINGS STAINLESS STEEL FPM (VITON) GASKET FOR PNEUMATIC - F100/X

    PUSH-IN FITTINGS STAINLESS STEEL FPM (VITON) GASKET FOR PNEUMATIC - F100/X
    These are a derivation of those made of brass. They differ from these latter in the body and the internal components made of AISI 316 stainless steel. The range, simpler than the brass one (there are no fittings with M3 and M5 metric threads, no fittings with female/female threads, no cross, no "Y" fittings, no column and no banjo) anyway permits all types of configuration. The gaskets, always made of FPM, make them suitable for uses with particularly aggressive fluids. Suitable for pneumatic, hydraulic use for the foodstuffs industry and aggressive fluids. Max. working pressure: 18 bar at 20°C (for PA11 pipes). Pipes that can be used: PA6 and Pa11 (nylon), PU, PE, PTFE. >>>
    View the product on olab.it Olab
    PUSH-IN PNEUMATIC FITTINGS MADE OF NICKEL PLATED BRASS - F100/U

    PUSH-IN PNEUMATIC FITTINGS MADE OF NICKEL PLATED BRASS - F100/U
    Push-in pneumatic fittings made of nickel plated brass with universal thread This is the well-known F100 serie, in which the male threads have been created with a helical profile, representing the envelope of the profiles of the BSPT (conical gas) and NPTF threads. The result is an extremely short thread, which is screwed equally to female gas threads and to NPTF ones. The seal between the male and female threads is created with a PTFE gasket, housed in a groove to the rear of the thread with a profile according to the UNI 5711-65 standard. - Extreme versatility in use, which no longer requires the management of different fittings for different threaded seats. - Because the screwing on involves practically the entire male thread, which completely disappears into the female one, the PTFE gasket produces a special sealing effect between the external environment and the internal part of the application seat: this makes the F100/U serie of fittings even more suitable for applications where special consideration must be paid to the hygienic conditions (the food sector for example). - Extremely rapid assembly: the short thread requires only a few tightening turns to make the seal because the PTFE gasket is continuous, the fitting can be re-used several times, without leaving particles or crumbs (as in the case of traditional liquid sealing products) that may pollute the passing fluid. >>>
    View the product on olab.it Olab
    PUSH-IN PNEUMATIC FITTINGS COMPLETELY MADE OF AISI 316 STAINLESS STEEL - F100/XX

    PUSH-IN PNEUMATIC FITTINGS COMPLETELY MADE OF AISI 316 STAINLESS STEEL - F100/XX
    Push-in pneumatic fittings completely made of AISI 316 stainless steel with or made of FPM (Viton) These are the most recent evolution of the F100/X serie of fittings. All the components are made of stainless steel, whilst only the o-ring gasket is made of an elastomer (FPM). This makes them suitable for uses where not only the fluid, but also the surrounding environment are particularly aggressive. The serie is the same as the F100/X serie. Suitable for pressures of up to 18 bar (in conformity with the type of pipe used), with a temperature range of up to 150°C. Max. working pressure: 18 bar at 20°C (for PA11 pipes). Pipes that can be used: PA6 and PA11 (nylon), PU, PE, PTFE. >>>
    View the product on olab.it Olab
    PUSH-IN PNEUMATIC FITTINGS MADE OF NICKEL PLATED BRASS FOR Ø 3 PIPES - F100/MINI

    PUSH-IN PNEUMATIC FITTINGS MADE OF NICKEL PLATED BRASS FOR Ø 3 PIPES - F100/MINI
    Profile Push-in pneumatic fittings made of nickel plated brass for Ø 3 pipes Extremely simple and highly compact, these fittings permit the connection of plastic pipes with an external diameter of 3. They are made entirely of nickel plated brass and can be supplied with NBR or FPM gaskets. Available in all the straight, bend and "T" versions, both union and swivelling type. All the threaded versions have an o-ring seal gasket behind the thread. Suitable for pressures up to 18 bar (according to the type of pipe used), with a temperature range up to 150°C, depending on the type of gasket. Suitable for pneumatic and hydraulic use. Max working pressure: 18 bar at 20°C (for PA11 pipes). Pipes that can be used: PA6 and PA11 (nylon), PU, PE, PTFE. >>>
    View the product on olab.it Olab
    PNEUMATIC MACHINE AIR CHIPPER CHIPPING HAMMER - ACH-16

    PNEUMATIC MACHINE AIR CHIPPER CHIPPING HAMMER - ACH-16
    * Air is vented along the chisel to clear away chips. * Rugged construction for a long life and dependability. * Constructed for trouble-free operation * Easy assembly and disassembly Specifications Stroke Speed 6000min-1 Rated Air Pressure 0.59 MPa (6kgf/cm2, 5.9bar) Rated Air Consumption 0.15m3/min. Mass 1.0kg Standard Accessories TQ03431 Flat Chisel 20x120, 1 pc. PT 3/8" x NPT 3/8" Reducer, 1 pc. PT 3/8" x 3/8" Hose Nipple, 1 pc. >>>
    View the product on nitto-europe.com Nitto Kohki Ltd
    COMPRESSION FITTINGS IN NICKEL PLATED BRASS - 0200 SERIE

    COMPRESSION FITTINGS IN NICKEL PLATED BRASS - 0200 SERIE
    Pipe fittings of the series 200 by olab belong to the group of cutting ring fittings (or compressive fittings). They match two functions in one single element: - they are pressure-tight; - they are used to hold pipes in place. T hese two functions are ensured by the cutting ring. When the nut is tightened on the pipe fitting body, the conical seat of the cutting ring causes a compressive strength around the pipe, which is then locked in place and pressure-tight. These pipe fittings can be used with different types of pipes (copper, teflon and similar pipes); however, with thin pipes or pipes made up of soft materials, we suggest using a sleeve (our item no. 247) to be mounted onto the pipe end, that prevents the cutting ring from collapsing the pipe during tightening. The maximum working pressure depends on the size and type of pipe being used. As no gaskets are installed onto the fitting, working temperatures depend on the material used for the pipe. Thanks to the large range of pipe fittings of the series 200 by olab in the straight, bulkhead, bend, "T" versions, and swivelling eyelets, a large number of configurations is possible. Pipe fittings of the series 200 by olab are mainly used in the following applications: - HYDRAULIC PLANTS: all plants using under-pressure oil (machine tools, pumps, etc.). - MECHANICAL SECTOR: pneumatic and hydraulic circuits. - INDUSTRIAL PLANTS: ducts, hot and cold water, steam, air. - AIR-CONDITIONING SYSTEMS: sanitary circuits for hot and cold water and air. - AGRICULTURE: water circuits, water supply mains, sewage systems. >>>
    View the product on olab.it Olab
    ACCUTRAK ROTARY POSITION MONITOR - 1000

    ACCUTRAK ROTARY POSITION MONITOR - 1000
    Features High performance polyamide resin enclosure with clear cover option. Prewired terminal blocks are numbered and color-coded. Micro-Switch V3 mechanical position limit sensors. CSA approved as General Purpose, NEMA 4, 4X enclosure. An impact and corrosion resistant valve position Beacon™ visual indicator. Touchset™ cams are fastened to a splined shaft and can be set by hand in 5 seconds. The Super tough AccuTrak Series 1000 combines chemical resistance with high impact strength and immunity to weathering. Unaffected by electrolytic corrosion and high concentrates of alkalis, the Series 1000 is remarkably resistant to attack from bacteria and fungi; a feature especially important in food and beverage processing plants. Available in solid Engineered Resin or with clear copolyester covers, the Series 1000 combines strength with corrosion resistance. Each unit carries a UL flammability rating of 94-HB. >>>
    View the product on westlockcontrols.com Westlock Controls Ltd
    HI-FLO MK3 TYRE INFLATOR

    HI-FLO MK3 TYRE INFLATOR
    Hi-FLO MK3 Tyre Inflator Accuracy : Exceeds EC Directive 86/217 Reading Accuracy : 0.1bar / 2 lbf/in² / 10 kPa Maximum Inlet Pressure : 13.8 bar / 200 lbf/in² / 1300 kPa Inflation Range : 9.6 bar / 138 lbf/in² / 960 kPa Operating Temperature : -10°C to 60°C The highly-regarded MK3 has become an industry standard in a wide range of markets from tyre shops, garages and transport depots to petrol forecourts and is recognised by operators and tyre fitters alike as a reliable high performance tyre inflation device. Manufactured in the UK, by PCL to the highest quality standards. The latest version of the MK3 Tyre Inflator the Hi-FLO offers dependable high performance tyre inflation in both indoor and outdoor applications. The Hi-FLO MK3 is the latest generation of handheld linear air line gauge offering reliability, accuracy, high levels of robustness and now with leading inflation and deflation rates. Key Benefits Reduced operating costs with fast inflation and deflation rates Long life – excellent shock resistance with robust durable design and construction High versatility – suitable for indoor and outdoor environments, commercial and retail applications Guaranteed accuracy – complies with BS EN 12645:1999 and EC Directive 86/217/EEC Easy to install – full instructions supplied with each gauge Individually tested – each unit has a unique serial number and is supplied with a Certificate of Calibration Key Features New valve design increasing inflation speed (500 l/min @ 13 bar supply) Cast aluminium body Proven linear spring gauge Magnified clear linear gauge display Individual testing and certification bar, lbf/in² and kPa calibrations and a large range of options and accessories High pressure model with inflation pressure up to 21 bar / 300 lbf/in² >>>
    View the product on pcl.org.uk Pneumatic Components Ltd
    FUEL (GH2) CONTROL VALVES:SOLENOID VALVE

    FUEL (GH2) CONTROL VALVES:SOLENOID VALVE
    The Aerodyne GH2 solenoid valve (part #10348) is designed for "in tank" installation. This valve is a piloted shut off valve that uses internal tank pressure to assist in maintaining a pressure differential across the main poppet. This pressure differential contributes to the valve's low internal leakage capability. When the solenoid is energized, the poppet fully shifts, and hydrogen flows to the outlet port. Characteristics: * Fluid: Gaseous Hydrogen (GH2) * Type: Normally Closed * Inlet pressure: over 10,000 psig * Flow range: 0 to 3 g/s (75 scfm) * Operating temperature: -40°F to +185°F (-40°C to 85°C) * Material: 316 CRES * Voltage: 14VDC @ 1 amp (continuous) >>>
    View the product on aerodyne-controls.com Aerodyne Controls Groupe - CIRCOR
    FIXED HEAD TRANSFER ARM - SERIES BST

    FIXED HEAD TRANSFER ARM - SERIES BST
    Series BST Fixed Head Transfer Arms are specifically designed as a direct replacement to fit most Sidel® Series1 machines requiring a fixed head. BST Transfer Arms provide significantly longer service life and reduce both maintenance and downtime in stretch blow mold applications. The BST Transfer Arm head and jaws are made of hardened stainless steel to provide maximum life and durability. The 30° head offers a low profile design, with a more rigid design in all head styles that significantly reduces jaw vibration. All units come standard with FDA approved lubrication for use in food packaging applications. A common modular head design is used on all fixed head units and can be easily converted to other jaw openings. >>>
    View the product on phdinc.com PHD
    SERIES 35-10 - VACUUM SUPERINSULATED VALVES

    SERIES 35-10 - VACUUM SUPERINSULATED VALVES
    These valves are designed to be incorporated into vacuum superinsulated pipework in applications where it is essential to reduce heat inleak to a minimum and so conventionally insulated valves are unsuitable. Type 35-10 valves are of an angle pattern to minimise pressure drop. Type 35-12 are rightangled valves. Construction is in austenitic stainless steel, with all-welded body/jacket, single-piece stem, and tapered fluoropolymer seat with metal-to-metal back-up. For ease of maintenance, the handwheel/ shaft/ gland/seal assembly may be withdrawn through the top of the valve without having to break the vacuum seal. Types 35-10 and 35-12 are fitted with a handwheel, for manual operation. Types 35-11 and 35-13 are designed for automatic operation with pneumatic actuators 35-50 to 35-80. Specifi cations Maximum working pressure 15 bar g Dimensions A : 480 B : 250 C : 150 D : 430 E : 250 F : 150 Actuators 35-50 : Double-acting, low or high pressure. 35-60 : Single-acting, high pressure. 35-70 : Single-acting, low pressure. 35-80 : Pneumatic solenoid valve for use with the above actuators >>>
    View the product on thamescryogenics.com Thames Cryogenics Ltd
    SERIES 500 PNEULARM

    SERIES 500 PNEULARM
    Pneularm is HNL's multipoint pneumatic annunciator sytstem available for both site mounting and panel mounting. Pneularm annunciators are totally pneumatic in operation and contain no electrical items. Series 500 is fail-safe in operation and provides both visual and audible signals in the event of an alarm. On ACCEPTANCE, the audible alarm is cancelled and the visual indicator shows continuous red. TEST causes all indicators to flash and the audible alarm to sound. >>>
    View the product on hnl-uk.com HNL Instruments & Controls Ltd
    GRIPPERS - GA/GP SERIES

    GRIPPERS - GA/GP SERIES
    GP Series true parallel grippers are high quality pneumatic grippers designed to provide exact parallel motion in relation to the part for pick and place applications. Incorporated are standard features that will provide for millions of trouble free cycles. The fingers have pre-drilled holes to facilitate customer added tooling. Specifications: Maximum operating pressure: 100 psi Operating characteristics: double acting Gripping force @ 100 psi: 22 to 54 lb Maximum breakaway pressure: 10 psi Mounting orientation: unrestricted Operating temperature range: Standard seals 0° to 180°F Fluorocarbon seals* 0° to 250°F Filtration requirement: 40 micron filtered, dry air >>>
    View the product on parker.com Parker Hannifin (Instruments Division) PLC
    CONTROL PANELS

    CONTROL PANELS
    Pneumatic Automation offers a complete solution to customers control requirements. We can supply all the controls necessary to automate you plant. Our specialised department can design and build bespoke panels and cabinets to your specific requirements. We can provide small closed loop boxes with simple controls, to larger cabinets with touch screen PLC operation, with bespoke programmes and graphics. As part of our dedication to continued service, Pneumatic Automation can also provide a cabling and commissioning and training service. >>>
    View the product on pneumaticautomation.co.uk Pneumatic Automation Ltd
    M-5000 SERIES MODULAR MANIFOLD

    M-5000 SERIES MODULAR MANIFOLD

    * Modular Dovetail Design * Miniature Size * Low Cost The Modular Manifold is designed for instrumentation and industrial applications. The Unique Modular Dovetail design allows the manifold block to be used as an individual unit or assembled into a modular combination of pneumatic components. The Modular Manifold is available in two models; the standard model and the filtered model. The standard model is unfiltered. The filtered model contains four stainless steel filters in the side ports. Micron size is 380. The top cover is unfiltered. >>>
    View the product on air-logic.com AIR Logic
    GENERATOR PC0102300

    GENERATOR PC0102300
    The 2300 Watt ProForce generator is great for light duty home backup and recreational activities. This unit features an easy pull start 5.5 HP OHV engine with low-oil shutdown protection. Its 3 gallon gas tank with fuel gauge provides up to 10 hours of run time @ 50% load. The control panel includes two 120V outlets and circuit breaker protection. The carry handles on both sides make moving the unit a snap. FEATURES: * 2300 running Watts, 2875 maximum Watts * Easy start 5.5 HP OHV gas engine with low-oil shutdown * 3 gallon metal gas tank with fuel gauge * Runs up to 10 hours @ 50% load * (2) 120V outlets, on/off switch, and circuit breaker protection * Low-oil shutdown with indicator lamp >>>
    View the product on colemanpowermate.com COLEMAN POWERMATE Groupe - Sunbeam
    PNEUMATIC ROTARY TABLES

    PNEUMATIC ROTARY TABLES
    G.P.A. rotating tables are available in two versions: TAR 270 and TAR 160. TAR 270 can handle bigger loads, aided by the hydraulic control and double cylinder which can be supplied on request, whilst TAR 160 is ideal where the need for compactness prevails and loads are limited. Their great resistance, careful design, simple operation, scarce need for maintenance and precision that is constant over time are the features that make these products extremely valid for rotating transfers in light mechanical work or in assembly automation >>>
    View the product on gpa-automation.com G.P.A. ITALIANA


    12Suivant >>Fin >
    Go to page


      Search    
     
     
     
    Search
    See all of the sector's products : Hydraulics - Pneumatics