Measuring devices, analysis and sensors: suppliers, wholesalers and manufacturers on Hellopro
Search   

Measuring devices, analysis and sensors :

7381 products
Select the category
Selection of 120 products among 7381
ISOMAG - EX SENSOR FOR ELECTROMAGNETIC FLOW METER MS 4000

ISOMAG - EX SENSOR FOR ELECTROMAGNETIC FLOW METER MS 4000
The MS 4000 ‘flanged’ sensor is used to measure flow in hazardous areas. Atex certified. Protection rate: EEx e ia IIB T4 Certification: INERIS, certificate N. 02ATEX0046X Flanges and body material: Carbon Steel, SS AISI304/316 Nominal diameters: from DN 3 to DN 300 Flowrate: 0…2520 m3/h Lining materials: PTFE Nominal pressure: from PN 16 Wide choice of process connections. Liquid temperature: from -20 to +130°C Wide choice of electrodes materials. Accuracy: +/- 0,4% of the read value (with ML 400 SA converter). >>>
View the product on isoil.it Isoil Industria
VISION 2D COORDINATE MEASURING MACHINE

VISION 2D COORDINATE MEASURING MACHINE
Vision 2D Coordinate Measuring Machine ITP Group’s solution to two-dimensional coordinate measurement, the ITP Group Vision 2D coordinate measuring machine is suitable for the measurement of printed circuit boards, laser cut blanks, labels and gaskets. The Vision 2D CMM comes complete with PC Workstation, a wide range of measurement software, and is available with either manual or CNC control. ITP Group's Vision 2D Coordinate Measuring Machine Features: Fabricated steel construction Mechanical bearings & hardened ways Manual Deva or CNC control CCTV line generator with video display graticule Ideal for small parts & printed circuit boards PC workstation Available with 3D geometric & DRO software Measuring Range X = 500mm - 2000mm Y = 500mm - 2000mm Typical Accuracy U1 = 12+L/500 U3 = 15+L/250 Recommended Probe Systems Renishaw PH6, MIH, PH10 & PHS Support >>>
View the product on itpgroup.co.uk ITP Group
VISION 2D COORDINATE MEASURING MACHINE

VISION 2D COORDINATE MEASURING MACHINE
Fabricated steel construction Mechanical bearings & hardened ways Manual Deva or CNC control CCTV line generator with video display graticule Ideal for small parts & printed circuit boards PC workstation Available with 3D geometric & DRO software Measuring Range X = 500mm - 2000mm Y = 500mm - 2000mm Typical Accuracy U1 = 12+L/500 U3 = 15+L/250 Recommended Probe Systems Renishaw PH6, MIH, PH10 & PHS Support >>>
View the product on itpgroup.co.uk ITP Ltd
GWZ-S6 LIMIT MONITOR FOR MAX. 6 MEASURING SYSTEMS

GWZ-S6 LIMIT MONITOR FOR MAX. 6 MEASURING SYSTEMS
* Compact limit monitor in a plastic housing with a DIN (top hat) rail for installation in a standard field distributor (switch boxes). * With alphanumeric display of concentrations. * Max. 6 measuring systems can be connected. * Six 4-20 mA inputs. * Supply voltage: low voltage; 24 V DC or 18 V AC. * It is equipped with 4 instead of 2 limit indicator relays. * Consequently, limit monitoring in 4 stages is possible. (In an underground parking garage, for example, the ventilation can be set successively to stages 1, 2 and 3 when the concentration of carbon monoxide rises and, finally, the alarm "Evacuate underground parking garage" can be triggered.) * In addition, it also is possible to group the measured values of the individual measuring systems. (Thus, for example, 3 different gas measuring systems respectively can monitor the indoor air in two rooms; the limit monitor can trigger a preliminary or main alarm separately for each room.) >>>
View the product on dittrich-systeme.com J. DITTRICH
LASER SENSORS: LASER DISTANCE MEASURING 43

LASER SENSORS: LASER DISTANCE MEASURING 43
The LDM43 is a laser based distance measuring module featuring a Profibus® interface. Its outstanding reliability, flexibility and cost-effectiveness recommend the opto-electronic sensor for industrial applications. Distances ranging from 10 cm up to 150 m can be measured with millimeter accuracy in a non-contact procedure that requires no reflector. An eye-safe easily perceivable measuring laser beam is provided for pin-point alignment of the compact sensor module. The Profibus® DP-VO interface allows for easy integration of the LDM43 into field-bus-controlled industrial automation environments. The additional SSI interface provides an another standardized tool for data acquisition. >>>
View the product on jenoptik-los.de JENOPTIK Laser, Optik, Systeme Groupe - Jenoptik
PIEZORESISTIVE PRESSURE SENSOR - TYPE 4005BA10F

PIEZORESISTIVE PRESSURE SENSOR - TYPE 4005BA10F
Piezoresistive pressure sensor, measuring range 0 ... 10 bar and fine thread M5x0,5 without amplifier Characteristics Absolute pressure sensor for measurements in intake manifolds of internal combustion engines, and wherever precise pressure measurement of dry and non-corrosive media is required. Extremely precise pressure measurements, Compact size, High natural frequency, Low acceleration sensitivity, Low mass Applications As a result of its small size, small dead volume and high natural frequency, this sensor is ideal for measurements in engine induction systems. If the engine design permits, the sensor can be installed in the immediate vicinity of the valves, a position which allows gas exchange characteristics and quality to be determined very accurately. In principle, it is also possible to use the sensor in other applications. However the medium to be measured should be gaseous and non-corrosive. >>>
View the product on kistler.fr Kistler
ELECTROMAGNETIC FLOW SENSOR OPTIFLUX 6000

ELECTROMAGNETIC FLOW SENSOR OPTIFLUX 6000
Electromagnetic flow sensor for sanitary and hygienic applications Product features Unique L-shaped gasket prevents expansion of the gasket into the measuring tube Simple and effective SIP (Steaming in Place) and CIP (Cleaning in Place) Cleaning temperatures depending from the process connection up to 150ºC / 300°F Large diameter range up to DN 150 Low weight Conductivity - non water >1 µS/cm - water >20 µS/ cm >>>
View the product on krohne.com Krohne Ltd
SYSTEM FOR MEASURING INSTRUMENT MOBILEDROP

SYSTEM FOR MEASURING INSTRUMENT MOBILEDROP
MobileDrop The MobileDrop received an award by the "Initiative Mittelstand" in the category "micro- and nanotechnology". Please find more information on the webpage of the initiative. (Available only in German). MobileDrop is a semiautomatic and fully integrated system for measuring contact angles and surface free energies on samples of virtually any size. Its low weight, operation with a notebook and simple handling mean that the instrument is a flexible and reliable partner for quality assurance, both in the lab and on-site. Mobile stand-alone contact angle measuring instrument with measuring head for one-hand operation Mains-independent measurements on: very large surfaces very small surfaces in cavities on vertical surfaces Drop positioning by laser pointer Rapid liquid exchange USB camera Intelligent measuring and evaluation software Extensive liquid database The MobileDrop from KRÜSS has achieved a new dimension in mobility and simplicity for the contact angle measuring technique. The measuring head only weighs 500 g and can be comfortably operated with only one hand. The compact space within the housing is occupied by high-precision components: prism optics, an “intelligent” camera and a fast exchangeable dosing unit. Operation with a notebook ensures fully independent on-site use of the instrument. The ergonomic measuring head is placed on the sample, which can be of almost any size. The dosing lever lowers the needle and deposits the liquid – the drop volume can be adjusted in 2 µl steps. A prism arrangement transfers the outline shape of the drop via the builtin camera to the connected notebook, where the time-proven KRÜSS SW23 (DSA2) software evaluates the drop video. A range of different liquids can be deposited in quick succession - the DSA2 uses the drop shapes to determine the contact angle and then calculates the surface free energy from it. KRÜSS has incorporated the most important evaluation techniques for contact angles and SFE in the software. A comprehensive substance database and comfortable data management round off the program. >>>
View the product on kruss.de Kruss
SENSORS - H2000 - CAPACITIVE SENSOR

SENSORS - H2000 - CAPACITIVE SENSOR
Function: The H2000 sensor is a capacitive sensor suitable for measuring relative humidity in the range 0 to 100% RH. The development of the sensor took place over a number of years and a long programme of advanced polymer engineering has resulted in a polymer which gives good linearity over 0 to 75% RH as well as a negligible thermal coefficient. The H2000 sensor is constructed with one plate etched on to a metallised glass substrate which is very thinly coated with an active polymer dielectric. The second plate consists of a moisture permeable metallic film which sits over the polymer. The C5 is good for temperatures between 0ºC and 40ºC. >>>
View the product on lee-dickens.co.uk Lee-Dickens Ltd
VERTICAL LABEL SENSOR - LRD4100

VERTICAL LABEL SENSOR - LRD4100
LRD4100: Vertical Label Sensor for Clear & Opaque Label Slitting/Rewinding A Clear Label Sensor for high-speed counting on slitters rewinders. Vertically mounted for multiple unit operation. Use on drug and other critical label counts during slittling and rewinding. Faster than standard optical sensors AND it works with clear-on-clear labels. The LRD4100 will not work with metallic labels or labels with foil-stamp artwork. Clear-on-clear labels High-Speed Counting Slitters and Rewinders Faster than optical sensors Industry standard output Lion Precision reliability >>>
View the product on lionprecision.com Lion Precision
IQ-SENSE SENSOR AND CONTROL BECOME A SINGLE SYSTEM

IQ-SENSE SENSOR AND CONTROL BECOME A SINGLE SYSTEM
The newly developed IQ-Sense ® technology offers a complete new concept to intelligently integrate sensors into the automation environment. A maximum of four sensors can be connected, each through a 2-wire cable, to the new "4DI IQ-Sense ®" sensor module for ET 200S.Features:* Intelligent communication between sensors and control* Parameter and diagnostics data of the sensors are available system-wide* Extremely simple interfaces for error-free configuring and wiring* Optimum interaction between sensors and controlIQ-Sense ® offers one other absolutely new feature: System diagnostics, where wire breakage, short-circuit, maladjustment or module/sensor failure are automatically detected and signaled for each channel. Furthermore, gradual dirt accumulation on the optical system is also reliably detected in normal operation - and an alarm is output before a failure so that operation is not interrupted. Both the switching status as well as the diagnostics information are transferred from the sensor to the electronics module along a simple two-wire cable >>>
View the product on lpc-uk.com Lucas Power & Control Ltd
VISCOSCOPE VA-300S SENSOR

VISCOSCOPE VA-300S SENSOR
The ViscoScope VA-300S sensor a custom designed sensor, which is specifically constructed to customer requirements. The sensor is available for temperatures up to 1500°C. The range which can be covered by the Model VA-300S is: Range: 1.0 to 2,500,000.0 mPa.s x gr/cm3 Typically the sensors are typically calibrated for a three decade range i.e. 750 to 750,000 mPa.s x gr/cm3 but can be calibrated to cover more than 4 decades of viscosity measurement. Dependent on flange and process temperature classification the sensor is capable to be used for up to 1,50°C / 2,700°F and 350 bar / 5000 psi pressure. The process temperature is measured directly in the viscosity probe at the very same location at which the viscosity is being measured. The ViscoScope VA-300M sensor is compatible with ViscoScope electronics VS-4450, VS-B450. VA-C250 and VA-D250 >>>
View the product on marimex.cc Marimex Industries
COMPRESSION FORCE SENSOR SERIES SBC

COMPRESSION FORCE SENSOR SERIES SBC
Button sensor for compressive loads of up to 10,000 lb. Compact and rugged, the SBC is ideal for heavy duty applications with space constraints. Member of the BGI family of interchangeable sensors "Personality module" holds all calibration and configuration data Small size Stainless steel construction NIST-traceable certificate of calibration included Accuracy: ± 0.5% of full scale ±1 digit + BGI Weight: 0.4 lbs (0.2 kg) Warranty: 3 years >>>
View the product on mark-10.com Mark-10
IN-LINE MEASURING STATIONS FOR TURNING AND GRINDING MACHINES

IN-LINE MEASURING STATIONS FOR TURNING AND GRINDING MACHINES
Marposs post process measurement systems measure critical dimensions on ground or turned parts and may generate compensation feedback signals to the machine tool control. These systems may include standard and special measuring devices, using electronic units with statistical capability. These can be simple or sophisticated systems, dedicated or flexible, manual or automatic, stand-alone or fully integrated with process automation and robots. >>>
View the product on marposs.com Marposs
101 LIQUID FLO-SENSOR

101 LIQUID FLO-SENSOR
McMillan Model 101 FLO-SENSORS are capable of measuring extremely low liquid flow rates from 13 mL/minute up to 10 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a well-deserved reputation for continuous operational service for many years without failure. Because of the compact size and economical cost of these products, the Model 101 FLO-SENSORS are suitable for a wide variety of industrial, commercial, laboratory and O.E.M. applications. Some sample applications include measurement of hydrocarbon fluids, fuels, light oils, solvents, coolant, pesticides, mild acids, alkalis, and deionized water. Several power and output configurations are available,including both pulse and analog outputs. NIST Traceable certificates are available. A power adapter or cable assembly is required for operation. >>>
View the product on mcmflow.com McMillan
M3 DISTANCE SENSOR

M3 DISTANCE SENSOR
Distance sensor CCD digital This versatile usable sensor with integrated CCD camera affords very precise measuring results on nearly all surfaces - from black rubber right up to polished metal. The automatically adaptation to the gloss level by reducing of the measuring frequency enables that feature of the sensor. Like nearly all our sensors, also the M3 works according to the principle of triangulation. The resolution from 0.005 mm (0.20 mil) is according to the range of higher accuracy. Objects from 1 mm are realized reliably. The response time of 4 ms and the measuring frequency of 1 kHz allow 1000 readings / sec. Seven versions for measuring ranges from 5 to 250 mm (0.2 in. to 9.8 in.) are obtainable. The electronics is placed inside the sensor head, only a connection cable is necessary (included in delivery). The cleverest characteristic of this sensor is the laser shutdown (on/off) . Preferred areas of application: • object independent measuring (pale to dark) • distance measurement • attendance check • recognition of position • measurement length, angle, thickness • verify material property >>>
View the product on melsensor.de MEL Mikroelektronik
SMD SERIES PIEZORESISTIVE PRESSURE SENSOR

SMD SERIES PIEZORESISTIVE PRESSURE SENSOR
Description The SMD (surface-mountable device) series is ideal for hassle-free, low and medium pressure, OEM applications. Leave the handling, attaching and wire bonding of the die to us. Applications Automotive, medical, industrial, consumer, defense, aviation and others. Features · Range 5 to 500 psi (.34 to 34.5 bar) · Type Absolute, gage, differential and vacuum · Media Compatibility Clean, dry air and non-corrosive gases · Packaging Options Substrates, caps, chimneys, flanges, barbed fittings, venting, gels, etc. · Design Flexibility Sensitivity, resistance, bridge configuration, pressure, constraint, etc. >>>
View the product on merit-sensor.com Merit Sensor Systems
COMPACT SINGLE-CHANNEL MEASURING SYSTEM - EDDYNCDT 3300

COMPACT SINGLE-CHANNEL MEASURING SYSTEM - EDDYNCDT 3300
EddyNCDT 3300: Compact single-channel measuring system eddyNCDT 3300 is designed for industrial use in factory automation, for machine monitoring, for inspection and for measuring and testing. A new and modern controller conditions the sensor signals ready for the user. The linearisation in the field is greatly simplified with an integrated microcontroller and high accuracy is obtained for each conductive measurement object (target) and for each application environment. Operation is supported by a dialogue-aided, illuminated LC graphical display. The measurements are output as voltage and current. They are also displayed in metric or imperial units on the graphical display of the controller. The functional features are extended by limit monitoring, auto-zero, peak-to-peak value, minimum, maximum and selectable low-pass output filters. Specific features: Multifunction Controller with LC Graphic Display robust sensors to IP67 up to 3 configurations can be stored >>>
View the product on micro-epsilon.co.uk Micro-Epsilon UK Ltd
CO-ORDINATE MEASURING MACHINE

CO-ORDINATE MEASURING MACHINE
Co-Ordinate Measuring Machines (CMM) Supply of CMMs Co-ordinate Measuring Machines (CMMs) can be supplied as used or new from virtually every measuring machine manufacturer including: Mitutoyo, Brown and Sharpe, DEA, Zeiss, Leitz, Eley Metrology, LK, Johansson, Wenzel, Poli, Steiflemeyer and Tesa. As an independent trader we are able to offer the best measuring machine that suits your application. Types of Co-ordinate measuring machines There are various types of measuring machines including bridge type, cantilever type, gantry style and fully portable measuring machines such as those produced by Romer and Faro Arm. CMMs are available either as simple manual measuring machines or more sophisticated CNC (Computer Numerical Control) types. CNC measuring machines are of higher accuracy and programmes can be created and stored for repeated use, they are also more expensive than manual measuring machines >>>
View the product on Mid Antrim Saws
RPS - 401A-80P SELF CONTAINED SENSOR FOR LEVEL CONTROL

RPS - 401A-80P SELF CONTAINED SENSOR FOR LEVEL CONTROL
The RPS-401A-80P analog ultrasonic sensor is mounted in a PVC barrel housing and is completely self contained. It is powered by 20-30 VDC and is reverse polarity protected. It also has a narrow beam angle which enables it to get into tight places. A flat target can tilt up to 10 degrees and still be detected. The RPS-401A-80P has 2 short circuit protected analog outputs, 4-20mA and 0-10 VDC. These outputs can easily be inverted and can be scaled over almost any range by means of adjusting the zero (P1) and span control (P2). The (P1) potentiometer must be adjusted first. Both analog outputs can be used at the same time. >>>
View the product on migatron.com Migatron
NP-17 PELLISTOR GAS SENSOR

NP-17 PELLISTOR GAS SENSOR
Specifications Recommended Voltage: 2.0V +/- 0.1V Current Drawn: 175 +/- 20mA Zero Offset: 0mV +/- 25mV Minimum Sensitivity: 20mV/1%CH4 Range: 0-100% LEL Accuracy: +/- 1%LEL(CH4) Maximum Long Term Drift: Span: < +/- 1% LEL/Month Zero: >>>
View the product on nemototech.com NEMOTO
AF56-N SINGLE CHANNEL NIR ABSORPTION SENSOR

AF56-N SINGLE CHANNEL NIR ABSORPTION SENSOR
The model AF56-N is a single channel Near Infrared (NIR) absorption sensor. This inline sensor is designed for a variety of industrial processes. The AF56-N measures concentration or turbidity and can be used for demanding applications such as filter control, phase separation, and yeast cell concentration. The AF56-N sensor uses light in the near infrared range (NIR) from 730 to 970 nm. A precisely defined, constant light beam penetrates the process medium. The attenuation of the light intensity, caused by absorption and/or scattering by substances in the medium, is detected by a hermetically-sealed silicon photo diode. The change of light intensity is a function of the concentration of the dissolved and undissolved substances in the process medium. The AF56-N measures parts per million (ppm) and percentage (%) concentrations, independent of color influences. An optical filter adapts the wavelength for an individual application. The single crystal sapphire optical window provides superior resistance to all abrasive and corrosive media. The AF56-N is available with a broad variety of line sizes, process connections and wetted materials and can be adapted easily to the process. AF56-N Features Inline real time process monitoring Color independent concentration measurement High dynamic measuring range Extremely low maintenance CIP/SIP-compatible Broad variety of line sizes, process connections and wetted materials >>>
View the product on optek.com optek-Danulat
SHOCK SENSOR VIBRO

SHOCK SENSOR VIBRO
Security Grade 2 Environmental Class 2 VIBRO is an intelligent, microprocessor-controlled shock sensor suitable for a variety of internal applications. The unit is easy to install, featuring a unique ‘Learn Mode’ function, which automatically sets the sensitivity by ‘learning’ the level and number of impacts required to generate an alarm. Multiple impacts can be overridden using the ‘Gross Attack’ feature, which enables VIBRO to create an alarm from a single impact. The unit has a wide dynamic range allowing it to be calibrated to suit quiet or noisy environments and a non-volatile memory retains all the programmed settings should the supply voltage be removed and subsequently restored. Features ‘Learn Mode’ automatic sensitivity setting High or Low sensitivity ‘Gross Attack’ feature Selectable walk test Sequential Latching Auto ‘Self Test’ on start-up Also available in brown >>>
View the product on optexeurope.com OPTEX Europe Groupe - OPTEX Group
DISPLACEMENT SENSOR - CD1 SERIES

DISPLACEMENT SENSOR - CD1 SERIES
PSD (Position Sensing Device) optical system. · Self-contained Displacement Laser sensor. · Remote Teach input for added flexibility. · Good for OEM applications. (Sensing range : 30±4mm) ·CD1- 30N/P/CN/CP (Sensing range : 50±10mm) ·CD1- 50N/P/CN/CP (Sensing range : 100±35mm) ·CD1-100N/P/CN/CP (Sensing range : 130±50mm) ·CD1-130N/P/CN/CP (Sensing range : 250±150mm) ·CD1-250N/P/CN/CP Features Teach-in system The CD1 is simple to setup and easy to operate. It is not necessary to make manual adjustments to the sensor, just push the button. All-in-one solution The amplifier and sensor are built-in, the CD1 is a complete self-contained sensor. Dual Output - Digital On/Off and Analog. There is a choice of NPN or PNP transistor for the control output, choose the model number based on the desired type. The 4 to 20 mA analog output is standard on both types. Easy set-up and Measuring The High and Low limit of the measuring range can be set. 1:Go to the SET mode. 2:Teach the High and Low limit using the workpiece. 3:Return to RUN mode. >>>
View the product on optex-fa.com/index.html Optex FA Groupe - OPTEX Group
FIBER OPTIC POWER SENSOR - OP508

FIBER OPTIC POWER SENSOR - OP508
The OP508 was specifically designed for applications where cost-effective solutions for measuring, monitoring and logging of insertion loss or power fluctuations are needed. The OP508 is a small (4"x2"x1.25") desk-friendly module designed such that minimal movement and bending of the reference and test cables is necessary. This results in stable, accurate and repeatable measurements. >>>
View the product on optotest.com OptoTest
TIRE PRESSURE SENSOR - NPX-1

TIRE PRESSURE SENSOR - NPX-1
A programmable version of the tire pressure sensor shall be available for development purposes, allowing the customer to download the application code in an electrically programmable ROM version. This sensor is intended for developing the application specific program. In order to ensure high reliability, the production version of the tire pressure sensor will have the measurement routines (pressure, temperature, and supply voltage) implemented in a mask ROM version. >>>
View the product on panametrics.com Panametrics Ltd
REMOTE RADEYE™ DETACHABLE X-RAY SENSOR

REMOTE RADEYE™ DETACHABLE X-RAY SENSOR
The Remote RadEye detachable x-ray sensor is designed to fit into small spaces where a complete imaging camera won’t fit. Available with either a RadEye1, RadEye2 or RadEye HR sensor head, the Remote RadEye module sits at the end of a detachable cable that can reach into tight corners. The camera electronics are mounted in a separate enclosure which can be placed up to one meter away. While designed for portable NDT applications, the Remote RadEye can also be used in fixed installations. >>>
View the product on rad-icon.com Rad-icon


< Début << Précedent 123
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Measuring devices, analysis and sensors