Measuring devices: suppliers, wholesalers and manufacturers on Hellopro
Search   


Measuring devices :

1077 products
Select the category
Selection of 43 products among 1077
HIGH-VOLTAGE MEASURING (HSM 1)

HIGH-VOLTAGE MEASURING (HSM 1)
The high-voltage meter HSM 1 serves to measure AC-voltages of up to 10 kV~ on HAUG power packs (A). This meter is equipped with an additional high-voltage socket for connection to an ionizing unit. Thus power pack and ionizing unit can be tested and their voltage measured during operation (B). Performance testing (Multicheck) The high-voltage test unit Multicheck is a performance testing unit for HAUG power packs (AC-voltage) and HAUG ionizing units. We recommend this test unit to be standard equipment for all users of HAUG ionization systems. For testing power packs, the black measuring probe must be inserted, as far as it will go, into the high-voltage socket of the power pack. After pressing the red push button, the LED will illuminate green if the unit is functioning correctly. In case of malfunction, the LED will illuminate red or no display will be visible. For testing ionizing units, the test unit is to be placed vertically onto the ionizing pins. When the probe makes contact, the LED will illuminate green if the ionizing unit is functioning correctly. Remark: Please note that the Multicheck cannot measure the effective range of ionizing units. >>>
View the product on haug.de HAUG
COMPACT SINGLE-CHANNEL MEASURING SYSTEM - EDDYNCDT 3010

COMPACT SINGLE-CHANNEL MEASURING SYSTEM - EDDYNCDT 3010
EddyNCDT 3010: Compact single-channel measuring system The eddyNCDT 3010 ( non-contact displacement transducers) is a non-contact displacement measuring system operating on the eddy current principle. It is used for measuring targets made of electrically conductive materials which may be either ferromagnetic or non-ferromagnetic. The temperature operating range of the 3010 sensors ranges from -50 °C up to 150 °C. In the case of fluctuating ambient temperatures a stable output signal is very important for reliable measurements. Due to a patented temperature compensation method the eddyNCDT series 3010 offers a unique thermal stability, which no other system can offer. Specific features: active temperature compensation extreme repeatability ideal for OEMs >>>
View the product on micro-epsilon.co.uk Micro-Epsilon UK Ltd
COMPACT SINGLE-CHANNEL MEASURING SYSTEM - EDDYNCDT 3300

COMPACT SINGLE-CHANNEL MEASURING SYSTEM - EDDYNCDT 3300
EddyNCDT 3300: Compact single-channel measuring system eddyNCDT 3300 is designed for industrial use in factory automation, for machine monitoring, for inspection and for measuring and testing. A new and modern controller conditions the sensor signals ready for the user. The linearisation in the field is greatly simplified with an integrated microcontroller and high accuracy is obtained for each conductive measurement object (target) and for each application environment. Operation is supported by a dialogue-aided, illuminated LC graphical display. The measurements are output as voltage and current. They are also displayed in metric or imperial units on the graphical display of the controller. The functional features are extended by limit monitoring, auto-zero, peak-to-peak value, minimum, maximum and selectable low-pass output filters. Specific features: Multifunction Controller with LC Graphic Display robust sensors to IP67 up to 3 configurations can be stored >>>
View the product on micro-epsilon.co.uk Micro-Epsilon UK Ltd
ABB001 12VOLT GU5.3 VARIABLE ANGLE DOWNLIGHT

ABB001 12VOLT GU5.3 VARIABLE ANGLE DOWNLIGHT
If you are looking for a downlight that can rotate through 360 degrees for a retail display environment, then the ABB001 is ideal. This 12v 50w GU5.5 downlight is suitable for situations where low heat output is a priority Spec: 12v 50 w max. GU5.3 80 deg. variable angle Lamp: 12v 50 w max GU 5.3 ( not included ) Finish: Satin Silver Overall Diameter: 130mm Depth of fitting in ceiling: 116mm Cut out: 108mm Depth of fitting below ceiling: 77mm Availability: >>>
View the product on abbeylighting.co.uk Abbey Lighting Ltd.
CAMERA SENSOR ESPROS/LOB

CAMERA SENSOR ESPROS/LOB
The product ... ... for your application detects the activity in a defined area, for example in front of elevator doors in a warehouse elevators in heavily frequented buildings, such as hotels, airports, warehouses Moving doors in warehouses Features Your advantages intelligent picture sensor infrared sensor adjustable surveillance area integrated picture processing computer no external controller or PC necessary cost-effective increase of transportation capacities >>>
View the product on cedes.com Cedes (UK) Ltd.
DIGITAL MICROHMMETER DO5000

DIGITAL MICROHMMETER DO5000
This new generation of microhmmeters offers flexibility of measurement with high accuracy and exceptional functionality. The DO5000 microhmmeter encompasses all the features required of an ohmmeter in one instrument. Programmable measuring current in 100 steps ensures that the DO5000 is suitable for all your applications. Automatic temperature compensation references the measurement to 20°C and Hi / Lo limits permits sorting of components with the minimum of fuss. All these options are included in the basic unit as well as a data logging function which stores up to 4000 readings with date and time stamp. Statistical analysis of these values allows you to display the Max / Min /Average values as well as peak to peak and standard deviation. The DO5000 will even calculate cable lengths in ohms/metre. >>>
View the product on cropico.com CROPICO Groupe - Seaward Electronics
CHAUVIN ARNOUX CA 6250 10A MICROHMMETER

CHAUVIN ARNOUX CA 6250 10A MICROHMMETER
An easy to use high performance apparatus, the Chauvin C.A 6250 microhmmeter tests the quality of links with precision (resolution of 1µ?) thanks to the use of low resistance measurements.Chauvin Arnoux CA 6250 Features:• Giant back-lit LCD display.• Range: from 1 µ? to 2,500 ?.• 4-wire measurement method.• 3 measurement modes.• Temperature compensation function.• Internal memory: stores 1,500 measurements.• EN 61010-1 (Ed. 2001) 50V CAT III.• IP64 lid closed, IP53 open.Included Accessories:2 x Kelvin clamp cables, mains lead, accessory pouch & operating instructions. >>>
View the product on cuthbertsonlaird.co.uk Cuthbertson Laird Group
LIGHT SOURCES - ELS-6010

LIGHT SOURCES - ELS-6010
Providing a clear, low-risk path to 130 nm Cymer’s ELS-6010 enables semiconductor manufacturers to leverage their existing KrF experience during the transition to 130 nm design rules. It provides a highly line-narrowed spectral bandwidth of = 0.5 pm (FWHM) and = 1.4 pm 95 percent energy integral. The ELS-6010 enables full image performance from lithography steppers and scanners using lenses with numerical apertures > 0.75. >>>
View the product on cymer.com Cymer
LIGHTING - AMENITY AND AREA COLADA

LIGHTING - AMENITY AND AREA COLADA"
This ultra clean, stylish floodlight is manufactured in die cast aluminium and is available with a wide range of optical controllers including symmetric, asymmetric and narrow beam Discreet glazing fixings"> Available with either symmetric, asymmetric or narrow beam reflectors to provide alternative lighting effects"> Timed ignitor as standard"> Stylish 500mm projection steel wall and column brackets available"> Available in two sizes Colada 1, 70-150w and Colada 2, 150-400w"> >>>
View the product on dwwindsor.co.uk DW Windsor Ltd
MATERIALS TESTING INSTRUMENT/MAGNATEST D 3.623

MATERIALS TESTING INSTRUMENT/MAGNATEST D 3.623
The newest member of the MAGNATEST family. Fully digital test electronics from the signal excitation through to evaluation. Compact, attractive and economical, this new device joins the existing FOERSTER product range for non-destructive magneto-inductiv testing. Like the others in the series, the MAGNATEST D offers the possibility to perform uni-frequency as well as sequential multi-frequency testing. >>>
View the product on foerstergroup.com Foerster Instruments
DEGREE OF POLARIZATION (DOP) METER

DEGREE OF POLARIZATION (DOP) METER
Using a patented maximum & minimum search technique, this DOP meter measures and displays the Degree of Polarization (DOP) of a light source in real time, with high accuracy and wide dynamic range. While polarimeter-based systems are expensive and can be inaccurate for low DOP sources, and polarization scrambler-based instruments are less accurate for high DOP sources, this amazing, low-cost DOP meter provides simple, accurate measurement of both low and high DOP sources. >>>
View the product on generalphotonics.com General Photonics
GAUSSMETER - GM04

GAUSSMETER - GM04
Both the GM04 / 05 Gaussmeters are hand held devises, easily transported to various locations in a factory environment. Each unit is controlled by a simple menu and is supplied with a thin semi-flexible Transverse Probe suitable for all but the very smallest of applications. The GM04 / 05 incorporates an analogue peak detector for the DC and AC peak functions. This, coupled with the microprocessor operation means that fast response is possible with digital stability (fast pulse / no drop in readings). The GM04 offers excellent performance and value for money as an instrument that can meet a wide range of magnetic measurement applications. >>>
View the product on hirst-magnetics.com Hirst Magnetic Instruments Ltd.
BROWSE PRODUCTS - FOR INDUSTRY - CT XXX -P

BROWSE PRODUCTS - FOR INDUSTRY - CT XXX -P
Non-contact and accurate milliamps measurementMain characteristics:3 standard models PCB mounting Small currents' measurement from 0.1 to 0.4 ARMS nominal Compact unique design for all the models Small size 30x30x20 mm Light: 25 g Operating temperature range: -20 to +85°C 5 years warranty Features:Accurate (1% of IPN at 25°C without offset) DC, AC, pulse, small currents' measurements with galvanic isolation >>>
View the product on lem.com LEM HEME Ltd
MINIATURE PHOTOELECTRIC SENSORS - EX-10 SERIES

MINIATURE PHOTOELECTRIC SENSORS - EX-10 SERIES
Ultraminiature photoelectric sensorsWith dimensions of only 14.5 x 3.5 x 10mm, the EX-10 series sensors are among the smallest and narrowest sensors worldwide. Despite their ultraminiaturised design, the maximum range of the thru-beam version is 1000mm yielding an exceptionally high performance. The EX-10 series is available in two different basic designs, with a front sensing or side sensing light source, which additionally extends the mounting options in narrow spaces. >>>
View the product on panasonic-electric-works.co.uk Matsushita Electric Works UK Ltd
BEAM SEPARATORS

BEAM SEPARATORS
Meadowlark Beam Separators are specially designed for laser line applications. Assembly consists of a true zero-order quarter-wave retarder (page 27-28) oriented with its fast axis at 45° to the transmission axis of a Laser Line Beamsplitting Polarizer (page 10-11). The transmitted beam is circularly polarized, regardless of the input beam polarization state. Our true zero-order Precision Retarders measure one quarter-wave within ± /350 waves. Aligning the fast axis to within 1° ensures greater than 99.8% source isolation from specular back reflections. KEY BENEFITS • High isolation • Low transmitted wavefront distortion SPECIFICATIONS Material: BK 7 Grade A, fine annealed Transmitted Wavefront Distortion (at 632.8 nm): = /5 Clear Aperture: Central 80% circular Reflectance (per surface): = 0.5% at normal incidence Surface Quality: 40-20 scratch and dig Beam Deviation: = 3 arc min Acceptance Angle: ± 2 Standard Wavelengths: 532, 632.8, 670, 780, 850, 1064, and 1550 nm Dimensional Tolerance: ±0.020 in. Temperature Range: -20 C to +50 C Recommended Safe Operating Limit: 500 W/cm2, CW 300 mJ/cm2, 10 ns, visible 200 mJ/cm2, 10 ns, 1064 nm >>>
View the product on meadowlark.com Meadowlark Optics
100A PORTABLE DIGITAL MICRO-OHMMETER - MPK-102

100A PORTABLE DIGITAL MICRO-OHMMETER - MPK-102
Microprocessor controlled Alphanumerical display Resolution down to: 0,1 µO Resistance reading up to: 200 O Up to 100 A test current Kelvin-type (4 - wires) measurement Powered by internal battery (up to 10A) or mains supply Direct reading (up to 4½ digits) Overheating protection Serial data output (RS232) Lightweight (14 kg) The MPK-102 high-current micro-ohmmeter is a truly portable, microprocessor-controlled instrument, used to accurately measure very low contact resistances of breakers and switches, busbars, transformer and motors winding and motors, etc, with test current from 1 mA to 100 A. It employs the Kelvin-type measurement to avoid measurement errors caused by test leads and their contact resistances. Readings are shown in the alphanumeric display with up to 4 ½ digits resolution. It allows to measure resistances up to 200 O, with a resolution down to 0,1 µO. Using its internal rechargeable battery, measurements with up to 10 A test current may be carried out without connecting the equipment to the main supply. Powered by the mains supply, it allows to measure with any test current up to 100 A. Measurement accuracy is guaranteed by an state-of-the-arts signal amplification system, offset-free and of high long-term stability. For each test current the micro-ohmmeter has two scales, automatically eligible by the microprocessor in order to increase ten times reading resolution. Test current may be continuously adjusted by the operator in every one of the scales and their values are measured using an analogue indicator, making it easy to measure resistances with a significant inductive component, as in the case of big transformers windings. It has a Serial output (RS-232) that may be connected to a printer, computer, or any data-logger to register measured values. The Hold function keeps in the display the measured value at a certain time-point, when the corresponding key is pressed. The high-current generation system is based on modern technology that allows to significantly decrease both its weight (14 kg) and size. The cabinet is made of plastic material highly resistant to impacts and to environmental challenges. Internal thermal sensors in all sensitive components avoid any damaged caused to the instrument due to overheating. This is a strong but lightweight equipment, and may be easily carried by one person. It is water-resistant and can be used under severe weather conditions offering an excellent performance working both in the laboratory and out in the field. >>>
View the product on megabras.com Megabras
SQUARE PANEL METER - DLMQB 96

SQUARE PANEL METER - DLMQB 96
For Active Power or Reactive Power Description Analog panel meter with core-magnet moving-coil movement and built in power converter for active and reactive power. Depending upon type of system and power, the power converter consists of one, two or three multipliers. The multipliers funtion in accordance with the TDM process (time division muliplier). The output signals from the multipliers are added and fed to the moving coil mechanism. Display Scale Division Coarse-fine Pointer Beam pointer with edge-knife Mechanical Design Housing Material Polycarbonate. self-extinguishing and drip-proof per UL94V-0 Mounting Fasteners Screw Clamp Scale Interchangeable Scales ? Scales may only be replaced under voltage-free conditions! Replaceable Front frames and glass windows ? May only be replaced under voltage-free conditions Terminals M4 screw terminals with self-lifting terminal clips. Screws can be turned with a cross-head or standard srew drivers. Contact Protection Finger-safe terminal cover included Moving-coil movement, 90° scale white, imprint black Narrow front frame matt black per DIN 43718, anti-glare glass Front Dimensions mm 96 x 96 Type DLMQB 96 Scale Length mm 97 Accuracy Class 1.5 Max. Weight (standard model) 0.56 kg Max. Operating Voltage 600 V Test Voltage 5.8 kV Front Housing-Panel Protection IP 52 Input Meter 1 mA Power Consumption Connection Power Consumption Current Path approx. 0.2 VA Voltage Path = 4.3 VA Reference Conditions Reference Quantities Reference Conditions Ambient Temperature 23°C ± 2°C Position of Use control panel vertical ±1° Frequency 50 Hz ±2 % Current Components 20 ... 120% of rated value Voltage Components 98 ... 102% of rated value Warm-Up Time = 5 min. Other DIN EN 60051 >>>
View the product on metrix-electronics.com Metrix Electronics Ltd
DIGITAL MICROHARDNESS TESTER

DIGITAL MICROHARDNESS TESTER
Superior design & workmanship Direct reading of Vickers and Knoop micro hardness Fracture toughness function Light Load Brinell hardness Cylindrical Correction Function Automatic precision turret for accurate, repeatable alignment Up to 2 indenters and 4 objective lenses can be mounted LCD touch panel display for ease of use Rigid construction minimizes compliance errors Largest workspace with 120mm height and 160mm maximum depth Unique 9 (type-A) and 12 (type-B) load systems from 1 to 2000 grams >>>
View the product on microphotonics.com Micro Photonics
COMPACT CCD DISPLACEMENT SENSORS - OPTONCDT 1700

COMPACT CCD DISPLACEMENT SENSORS - OPTONCDT 1700
OptoNCDT 1700: Compact CCD displacement sensors The optoNCDT 1700 is an optoelectronic displacement measurement system with multi-functional features. Due to the integral controller, the system can be either configured via the controller or via PC software. It offers comprehensive functions such as programmable limits, various filter modes, adjustable exposure time and the mandatory synchronisation of two sensors, for thickness measurement. The unique Real-Time Surface Compensation (RTSC) feature enables measurement against a wide range of material surfaces (e.g. shiny metal, black rubber or glossy paint finishes). Its unique compact design makes the optoNCDT 1700 ideal for all industrial applications in automation and OEM production equipment. Special characteristics: compact design with integral electronics RTSC fast adaptation to changing surfaces analogue and digital output included >>>
View the product on micro-epsilon.co.uk Micro-Epsilon UK Ltd
ADC-212/50 AND ADC-212/100 PC OSCILLOSCOPES

ADC-212/50 AND ADC-212/100 PC OSCILLOSCOPES
A PC oscilloscope replaces bulky and expensive test equipment, saving money and space. Along with providing all the functionality of a conventional digital storage oscilloscope (DSO) the Pico Technology PC oscilloscope also has integrated spectrum analyzer and meter functions too. The ADC-212/50 and ADC-212/100 PC oscilloscopes combine high sampling rates (upto 100 MS/s for single shot signals and upto 5 GS/s for repetitive signals) with a high resolution (12 bits). Together with the supplied software, your desktop or laptop PC can be used as a powerful dual channel oscilloscope / spectrum analyzer. >>>
View the product on picotech.com Pico Technology
DATA LOGGER, PROCESS MONITOR

DATA LOGGER, PROCESS MONITOR
############################################################################################################################################################################################################################################################### >>>
View the product on processinstruments.net Process Instruments
75° BASIC GLOSSMETER

75° BASIC GLOSSMETER
The Novo-Gloss 75º gloss meter is a simple to operate instrument for measuring the gloss of flat paper, board, card or foil.The instrument is manufactured to TAPPI standards as referenced in the paper making industry.This instrument is calibrated using a simple thumb wheel, and single button press to read.With built in statistical analysis, memory and the ability to download results to a PC the instrument has all the features you will ever need for fast accurate gloss measurement. >>>
View the product on rhopointinstruments.com Rhopoint Instruments Ltd.
AC HIPOT TESTER - 1305

AC HIPOT TESTER - 1305
The 1305 is 3 KV, 5 mA AC Hipot tester. This entry-level tester is designed with the basic features for simple and cost-effective production line AC Hipot testing. It features a LED display, menu driven parameter control, pulse mode, parameter storage and continuous or momentary dwell cycles. 1. Tamper-Resistant Front Panel Design Prevents operators from inadvertently or accidentally modifying test parameters, and ensures consistent and reliable test results, minimizing the need for costly and time consuming product re-testing. 2. Simple Menu Control All parameters for the setups can be adjusted through a simple menu driven program. The easy to follow setup screens ensure that the operator correctly sets up all test parameters. 3. No load setup of trip current and output voltage This provides the operator with an easy and safe way to set trip currents and output voltages since parameters are set without the high voltage activated. 4. Test Storage The 1305 powers up with the parameters that were used during the last test to avoid operator setup errors. 5. LED Display With Meter Memory The 1305 features a LED display for setting up and viewing test results. The meter memory allows operators to review the last test results. 6. Software calibration control The 1305 is calibrated through the front panel keypad. All calibration information is stored in non-volatile memory. This allows the instrument to be completely calibrated without removing any covers and exposing the technician to hazardous voltages. 7. Line and load regulation This system maintains the output voltage to within 1% from no load to full load and over the line voltage range to ensure that test results remain consistent and within safety agency requirements. 8. Flashing high voltage indicator A flashing LED located directly over the high voltage terminal clearly indicates when high voltage is active to provide maximum operator safety. >>>
View the product on hipot.com Slaughter
CX-400 SERIES COMPACT PHOTOELECTRIC SENSOR

CX-400 SERIES COMPACT PHOTOELECTRIC SENSOR
We have a full lineup of world standard photoelectric sensors! ‘Strong’,‘High’and ‘Less’:three keywords that reflect the fundamental concepts in the design and operation of our sensors. Strong: meaning being able to maintain fully reliable and stable levels of performance, no matter how adverse the work environment. High: meaning technology-backed high detectability. Less: meaning less waste, less time lost, less power consumption, less human and natural resources needed. We bring you the ideal standard sensors for the 21st century. >>>
View the product on sunx.co.jp/index_e.html SUNX


12Suivant >>Fin >
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Measuring devices, analysis and sensors