Measuring devices, analysis and sensors: suppliers, wholesalers and manufacturers on Hellopro
Search   

Measuring devices, analysis and sensors :

7381 products
Select the category
Selection of 120 products among 7381
ELECTRONIC DIGITAL SCALE

ELECTRONIC DIGITAL SCALE
Powered by mains power adapter or batteries.  Remote display can be wall mounted.  The spiral cord bridges a distance of 60 - 70 cm.  Not Legal-for-Trade.   Stainless steel >>>
View the product on gastrodirect.fr
ELECTRONIC DIGITAL SCALE

ELECTRONIC DIGITAL SCALE
Powered by mains power adapter or batteries.  Remote display can be wall mounted.  The spiral cord bridges a distance of 60 - 70 cm. Not Legal-for-Trade. Stainless steel   >>>
View the product on gastrodirect.fr
ELECTRONIC SCALE 10 KG - 1 G PRECISION

ELECTRONIC SCALE 10 KG - 1 G PRECISION
Electronic scale - 10 kg, Accuracy : 1 g, Possibility of counting, Minimum weighing : 20 g, Maximum weighing : 10 kg, Removable tray made of st/st (220 mm x 165 mm), IP53, Depth : 240 mm, Width : 240 mm, Height : 80 mm, Net weigth : 1,7 kg >>>
View the product on gastrodirect.fr
ELECTRONIC SCALE 5KG - 0.5 G PRECISION

ELECTRONIC SCALE 5KG - 0.5 G PRECISION
Electronical scale - 5 kg, Accuracy : 0,5 g, Possibility of counting, Minimum weighing : 10 g, Maximum weighing : 5 kg, Removable tray made of st/st (220 mm x 165 mm), IP53, Depth : 240 mm, Width : 240 mm, Height : 80 mm, Net weigth : 1,7 kg   >>>
View the product on gastrodirect.fr
INSPECTION OF GLUE BEAD DISPENSING - CORDIA M2D

INSPECTION OF GLUE BEAD DISPENSING - CORDIA M2D
Inspection of robot-mounted adhesive dispensing CORDIA M2D when setting up on a robot nozzle is a configuration adapted to body in white for long welds. Inspection of the weld on 360°C, during production flow, in real time, in any ways (curve, turn, etc.) via a sensor located around the robot nozzle. CORDIA M2D detects the interruptions of the weld, its width and positioning flaws. >>>
View the product on edixia.fr Edixia
SENSOR AND OVERLOAD PROTECTION EPS

SENSOR AND OVERLOAD PROTECTION EPS
RACO Electronic Position Sensor and Overload Protection EPS The RACO path-sensory system has been specially designed for exactly positioning and switching off electro-magnetic actuators in the final position. Not only is the position ascertained unconventionally by electro-magnetic means (e.g., gear-shifting mechanism) while doing so but it will also be determined via a close-coupled magnetic field without any movement. >>>
View the product on raco.de RACO
INCREMENTAL TRANSMITTER AND RESOLVER

INCREMENTAL TRANSMITTER AND RESOLVER
Incremental transmitter and resolver Incremental path-measuring and angle-measuring systems are used on electro-mechanical actuators as: feedback from transmitters for controlling the speed and position of three-phase motors or servo-motors in the converter operation sensors for controlling the speed of direct-current motors economical and high-resolution path-measuring sensors sensors for precise, direct-current or angular control during the synchronous running of several drives with frequency converters in master or slave operation. >>>
View the product on raco.de RACO
CONTROL & MONITORING EQUIPMENT - LEVEL SENSOR, HSC2

CONTROL & MONITORING EQUIPMENT - LEVEL SENSOR, HSC2
HSC2 is a sewage water resistant, stainless steel encapsulated, submersible, hydrostatic level sensor of high accuracy. It is designed for level measurement in liquids like stormwater and wastewater in pump sumps. When connecting the 2-wire loop powered sensor in series with a DC power supply, the HSC2 gives a 4 to 20 mA output signal which is proportional to the level of the liquid. The output signal can be connected to the mA - input of set point relays, chart recorders, indicating instruments, PLC, pump-controls, etc. The number of devices in series and the length of the cable from sensor to the devices is dependant on the supply voltage. The ceramic sensing element can withstand very high overpressures without damage. Furthermore the sensor can be connected to a PC via the CB2 connection box for calibration and/or scaling of the mA output signal. >>>
View the product on abspumps.com ABS Pumps Ltd
CURRENT SENSOR ACS712

CURRENT SENSOR ACS712
Fully Integrated, Hall Effect-Based Linear Current Sensor with 2.1 kVRMS Voltage Isolation and a Low-Resistance Current ConductorFeatures * Low-noise analog signal path * Device bandwidth is set via the new FILTER pin * 5 µs output rise time in response to step input current * 80 kHz bandwidth * Total output error 1.5% at TA = 25°C * Small footprint, low-profile SOIC8 package * 1.2 mO internal conductor resistance * 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8 * 5.0 V, single supply operation * 66 to 185 mV/A output sensitivity * Output voltage proportional to AC or DC currents * Factory-trimmed for accuracy * Extremely stable output offset voltage * Nearly zero magnetic hysteresis * Ratiometric output from supply voltage >>>
View the product on allegromicro.com Allegro Microsystems Europe Ltd
SOLID STATE CARBON DIOXIDE SENSOR

SOLID STATE CARBON DIOXIDE SENSOR
The Alphasense patented carbon dioxide sensor is a world first in CO2 monitoring: Requires no power Operates at room temperature One sensor measures from 500ppm to 95% CO2 Small size Low cost Simple interfacing Using the potentiometric measuring principle with our patented silver halide solid state electrolyte, this sensor does not have the high power requirement or high price tag of NDIR technology. This sensor is ideal where low cost and low power are critical for CO2 measurement. This sensor is the result of seven years of research and development, and this work continues. While not as accurate as NDIR, and not suitable for IAQ measurements, this sensor is ideal for safety alarms, combustion gas monitoring and high CO2 process monitoring. Contact us with your application. Evaluation boards are available. >>>
View the product on alphasense.com Alphasense
FLOODLINE OIL SENSOR

FLOODLINE OIL SENSOR
The Floodline Oil Sensor can be included as part of a larger water leak detection system or one or more can be used to provide a dedicated oil leak alarm system. Oil Sensors are connected to a standard Floodline Control Panel giving visual and audible alarm features in addition to the facility for onward, remote, communications to BMS etc. Applications: Internal oil tanks Plant rooms Pump sets Backup generators Detection: Activates with oil (or other liquid) Multiple re-use Instant return to use Construction: High density plastic body/sensor Sealed against immersion Heavy duty stainless steel guard Dimensions: Sensor: H71mm x W44mm x D25mm Guard Plate: H110mm x W105mm x D30mm Fixing: Vertically at base of wall or apparatus using Guard Plate Floor - free standing or fixed using Guard Plate/bracket Tank/Sump etc requires special bracket >>>
View the product on andel.co.uk/ Andel Ltd. / P.P.L.
COLLISION SENSOR - QS-100

COLLISION SENSOR - QS-100
The QS-100 is a dynamically variable collision sensor that operates on an air pressure system. A regulated air supply provides positive, variable pressure to hold the collision sensor rigid during normal operation. At impact, the air chamber seal is opened, immediately signaling the system controller. Key Benefits Dynamically variable trip points Permanent repeatability Use on linear actuators, robots, pick-and-place machines Detects angular, rotational and compressive forces >>>
View the product on arobotics.com Applied Robotics
TURBIDITY SENSOR TYPE AF 46

TURBIDITY SENSOR TYPE AF 46
Technical data Construction: Precision optic in steel housing Material: 1.4435 Installation: Standard connection 25 mm or 19 mm Connection: Fibre optic in viton-protection tube with connector length 2.8 m / 6 m Measuring window: Quartz Glass (option: Duran or Saphir) Operating temperature: -45°C ... 130°C (max. 150°C for 30 min) can be sterilised or autoclaved Operating pressure: max. 30 bar O-ring material (25 mm): Viton 18.64 x 3.53 mm (option: Kalrez) >>>
View the product on aquasant.com Aquasant
FREEFLOW™ SENSOR

FREEFLOW™ SENSOR
ACCURATE & ECONOMIC FLOW SENSOR Minimally invasive, low cost segmented wedge flow sensor. Used to monitor and control process water. NO MOVING PARTS The segmented wedge element provides a simple and reliable restriction for sensing flow as related to pressure differential UNRESTRICTED MOUNTING Allows the designer to install the meter in any orientation – horizontal, vertical or inverted. COMPACT AND RUGGED DESIGN Measures less than 10" long and 3-1/2" wide, with a flanged mounting base for simple installation. MULTIPLE FLOW RANGES AVAILABLE The FreeFlow™ Sensor is offered with several ranges of calibration to accommodate the requirements typical to process water applications. MULTIPLE PORT SIZES Standard selection of NPT ports reduces the amount of adapters required for installation. LOW-COST PRECISION Measuring accuracy of ±2% of range and repeatability of ±1/2%. Engineering Specification The FreeFlow™ Sensor Shall: Use the segmented wedge differential producer to measure flow rate as related to pressure. Not require inlet or outlet straight plumbing, or require vertical pipe mounting. Have a measuring accuracy of ±2% of full scale with ±1/2% repeatability. Be Lake Monitors No. FF– _ _ _– _ _ _– _ _ >>>
View the product on lakemonitors.com AW-Lake Company Groupe - Aw Lake
CONSISTENCY / SLUMP MEASURING INSTRUMENT - BTK-250

CONSISTENCY / SLUMP MEASURING INSTRUMENT - BTK-250
The technology of ready-mixed concrete is becoming more and more important in the building sector. Ready-mixed concrete of high quality is more and more in demand. The increasingly utilized self-compacting concrete requires an equally rational quality control like ready-mixed concrete and mortar. Therefore, we have substantially improved the quality of our consistency measurement devices during the last years. The BTK-250 is a compact and easy to use device for the fast and exact examination of the ready-mixed concrete directly in the mixer. The BTK-250 allows a reliable control of the concrete quality. The spreading serves as quality parameter. Measuring with continuous action Measures the effective power of the mixer motor and calculates the spreading / slump Clear LED display and analogue visualization Displays the consistency KS, KP, KR, KF or F1, F2, F3, F4, F5, F6 Displays the spreading of concrete from 34 to 63 centimetres Power supply 230 V AC 50/60 Hz or 115V AC 60Hz >>>
View the product on bikotronic.de Bikotronic
BW DIGI-METER SENSOR ONLY

BW DIGI-METER SENSOR ONLY
Pipe sizes: 3/8" to 12" No Display 25 feet of signal cable NEMA 4X rated, Outdoor use OK Coil sensor option Distance up to 200 feet (61 meters) Requires no external power AC sine wave output signal Coil generates AC voltage From .06 volts to approximately 3 volts, depending on the flow rate Hall Effect sensor option Distance up to 1 mile (1.61 km) TTL/CMOS compatible digital (current sinking) output signal DC square wave output signal Power required: Customer supply power (6-24V DC absolute) 115V AC plug in transformer 220V AC plug in transformer 230V AC plug in transformer >>>
View the product on bluwhite.com BLUE-WHITE
FLOWSENSE INFRA RED ALARM SENSOR & CONTROL INTERFACE UNIT

FLOWSENSE INFRA RED ALARM SENSOR & CONTROL INTERFACE UNIT
Specification Sensor o Supply: 12 VDC, 30mA (optional 24 VDC) o Output: 2 x PUP open collector, 150 mA @ 24 VDC max o Cable: 3m screened 4 core o Temperature: -5 to +60ºCOptions Dual channel PSU + Relay Unit o Supply: Selectable 115/230 VAC, 50-60 Hz o Output: 12VDC @ 200mA max o Relays: 2 x SPNO, 10A @ 30 VDC / 250 VAC o Temperature: -5 to +50ºC o Protection: IP65 o Indicators: Power on, Output and Set up LED’s. >>>
View the product on cacheuk.com Cache Instrumentation Limited
SLOT TYPE SENSOR GLS 126 NT

SLOT TYPE SENSOR GLS 126 NT
The product ... ... for your application pre-wired cables and plugs NPN and PNP output 200 mA short-circuit proof capacitive load max. 100 nF for bigger capacitive loads: GLS 126 NT-HCL (1'000 mF) fork gap 26 mm (1") Slot type sensor as a robust positioning sensor for exact shaft information sensor for the exact positioning of drives Modernization passenger elevators freight elevators dumbwaiter elevators custom elevators Features Your advantages light reserve of 10'000 % repetitive accuracy < 0.5 mm rise / fall time max. 1 ms CEDES light pipe and ASIC technology optimal price / performance ratio for reliable use in environments with smoke, dust or steam precise positioning easy mounting trouble-free operation in harsh environments gold-plated connections (PCB) >>>
View the product on cedes.com Cedes (UK) Ltd.
TILT SENSORS - CXTD DIGITAL TILT SENSOR

TILT SENSORS - CXTD DIGITAL TILT SENSOR
Roll and Pitch Angle Measurement in Any Orientation 3-Axis Digital Acceleration Output High Accuracy Fully Temperature Calibrated ~80dB Signal to Noise Ratio The CXTD02 offers outstanding resolution and accuracy in measuring tilt angles on an object with respect to gravity. The CXTD02 measures tilt using a triaxial MEMS accelerometer that is responsive to gravity. The triaxial accelerometer allows sensing over the entire 360° roll range and 180° pitch range. In addition, alignment, scale factor, and non-linearity compensation are computed internal to the sensor with the on-board DSP processor. >>>
View the product on xbow.com Crossbow
OPTISCAN SENSOR : MQS - RE

OPTISCAN SENSOR : MQS - RE
Part copying using the OptiScan sensor mounted in a Kuka robot. The copying installation is composed by two Kuka robots and an OptiScan sensor, as well as by the required software: the OptiScan sensor is moved by one of the robots and digitizes the part to copy. Afterwards, reverse engineering is done with the scanned data and the new obtained information is sent to the other robot, which mechanizes a wooden copy of the part. >>>
View the product on datapixel.com DATAPIXEL
SOLID STATE COULOMETRIC SENSOR DF-330E

SOLID STATE COULOMETRIC SENSOR DF-330E
The The DF-330E provides an ideal oxygen analyzer for many industrial applications where very fast response is critical. Using a unique solid state coulometric sensor with a solid electrolytre, it delivers fast response across a broad measurement range. The DF-330E features Exceptionally fast response – ppm levels from air in 5 minuites In-situ or in-flow mounting capabilitiesQuick recovery down to low levels after exposure to air Good low-end sensitivity plus a wide measurement range Consistent acuracy from sub-atmospheric pressure to 100 psig Range up to 100% >>>
View the product on delta-f.com Delta F Corporation
SENSOR ACCESSORIES 200100

SENSOR ACCESSORIES 200100
1/2-20 UNF Pressure Sensor Mounting Hole Cleaning Kit The Dynisco cleaning kit was designed for checking mounting hole dimensions and removing excess plastic from the mounting holes prior to installing melt pressure and temperature sensors. Installation of transducers into improperly machined, cleaned or improperly sized holes is the number one cause of damage to melt pressure sensors. This kit will allow a user to clean the 0.312" tip diameter hole, the 45 degree seating surface, and the 0.451" hole. The kit includes a gauge plug which is used to verify that the hole has been correctly machined and cleaned. M10 and M18 kits are also available. Important: The cleaning tool must be used when the polymer is in a semi-molten state. Care must be taken not to exceed a torque rating of 100 inch - pounds during scraping so as not to damage the cutting edges of the tool. These cutting edges are manufactured from hardened tool steel and will not wear if reasonable care is exercised. It is strongly recommended that a high temperature lubricant be applied to the tap and the threads of the guide sleeve and gauge plug to prevent seizing. Sensor Accessories 200100 1/2-20 UNF Pressure Sensor Mounting Hole Cleaning Kit The Dynisco cleaning kit was designed for checking mounting hole dimensions and removing excess plastic from the mounting holes prior to installing melt pressure and temperature sensors. Installation of transducers into improperly machined, cleaned or improperly sized holes is the number one cause of damage to melt pressure sensors. This kit will allow a user to clean the 0.312" tip diameter hole, the 45 degree seating surface, and the 0.451" hole. The kit includes a gauge plug which is used to verify that the hole has been correctly machined and cleaned. M10 and M18 kits are also available. Important: The cleaning tool must be used when the polymer is in a semi-molten state. Care must be taken not to exceed a torque rating of 100 inch - pounds during scraping so as not to damage the cutting edges of the tool. These cutting edges are manufactured from hardened tool steel and will not wear if reasonable care is exercised. It is strongly recommended that a high temperature lubricant be applied to the tap and the threads of the guide sleeve and gauge plug to prevent seizing. Features: Cleaning drill - P/N 200904 Cleaning drill guide - P/N 200906 Handle - P/N 200907 Gauge plug - P/N 200908 Bottoming tap - P/N 200905 Allen hex wrench - P/N 200909 Dykem blue - P/N 200910 >>>
View the product on dynisco.com Dynisco (UK) Ltd


123Suivant >>Fin >
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Measuring devices, analysis and sensors