Selection of 47 products among
77
PORTABLE CALIBRATION UNIT
Mobile Secondary Calibration Standard
Alicat's Portable Calibration Unit (PCU) was designed as a self contained, portable secondary calibration standard for easy transport and use.
Companies
dont have to waste engineering time and money as well as lose revenue for equipment downtime while verifying calibration on in service flow equipement. Alicat PCUs are designed to operate in the field as secondary calibration standards without the need for hard power sources.
The Alicat PCU is built into an industrial briefcase and can be taken anywhere in the world to verify the operation of flow equipment. Unlike current secondary standards, the PCU is fully self-contained and does not require any additional support equipment or line power. It is as simple as having a tech arrive on site, plug the unit into the system and take readings. The PCU also has on-board digital output to send flow data to a laptop or other computer system.
The PCU is comprised of 3 individual Alicat M series flow meters powered by two standard 9V batteries. The unit will alert the user to replace the batteries when power falls below a minimum threshold via a bright led indicator.
Like Alicat's standard line of flow devices the PCU also has no large mechanical parts to service or fail.
The ranges of the flow meters are specified by the end user while ordering the PCU.
Portability with all of Alicat's Standard Features
• Digital display for each meter
• Display of Mass Flow, Volumetric Flow, Pressure & Temperature on each meter
• RS-232 Digital output for easy datalogging and digital communication
• Powered by 2 standard 9V batteries. No need for special battery chargers or cables.
• 30 on baord user selectable gas calibrations
• Continuous flow reading
• Low battery power indicator
• CE, NIST Traceablity
>>>
View the product on alicatscientific.com
Alicat Scientific
ADVANCED MODULAR CALIBRATION SYSTEM
Advanced Modular Calibration System
Modularity brings a whole new perspective to multi-function test instruments and calibrators.
The Advanced Modular Calibration System uses three basic
components to provide the multi-functionality to perform duties formerly requiring a wide range of different instruments.
At the heart of this system is the DPI 620, an ultra-compact electrical, temperature and frequency calibrator, which provides simultaneous measurement and source capabilities. It integrates with pressure modules and pressure generation stations to form uniquely capable pressure test and calibration systems.
Product Description
The Advanced Modular Calibration System uses three basic components to provide the multi-functionality to perform duties formerly requiring a wide range of different instruments:
Its basic component is an ultra-compact, electrical, frequency and temperature calibrator, which provides simultaneous measurement and source capabilities.
Pressure measurement is provided by interchangeable pressure modules that can be attached to the calibrator by a pressure module carrier.
If pressure generation is required the calibrator and pressure module can be attached to one of three pressure generation stations, to form a fully-integrated pressure calibrator, of unparalleled performance.
>>>
View the product on ge.com/sensing
GE Sensing
MODULAR CALIBRATION SYSTEM - SYSTEM 8000
System 8000 is a Multipurpose Calibration Station that features a single 19" table top rack incorporating all it is needed to ensure the exhaustive calibration of a vast range of Process Instruments
and Sensors.
For any operator, even within no computer skill, nothing is easier to be used like System 8000 as anyone may effectively access and use the many configurable functions available.
System 8000 operates in digital fashion under microprocessor control. This makes it enhanced (and not only modern) as it is totally transparent to a Personal Computer through Scandura’s utility and application software packages.
This Multipurpose Calibration Station provides digital measurement simulation/generation of:
Pressure
Vacuum
Voltage
Current
Frequency (measurement only)
Resistance / Resistance bulbs
Thermocouples
Switch status test: Detection of ON/OFF status
Thanks to System 8000, Quality has a double meaning. One due to its own electronics and software, as both represent the state-of-the-art for calibration technologies, and the other because of its application span. In fact System 8000 shortens the way and the time required to conform user’s calibration procedures to ISO 9000.
Its exclusive redundancy of operations with B-20, the Scandura’s Multi-Function, Multi-Variable Portable Calibrator, remains unique, allowing a real integration between lab and field calibration under identical Quality Procedures and Calibration Formats.
As stand-alone unit (nothing like this system makes a calibration laboratory complete) or associating it to other Scandura hardware and software, System 8000 opens the doors of your Maintenance & Calibration Laboratories to Total Quality Management.
>>>
View the product on scandura.it
SCANDURA & FEM
MODULAR CALIBRATION SYSTEM - SYSTEM 9000 T
Calibration system composed of five different modules.
The first module is designed for measurement electrical reference signals to test and calibrate industrial transmitters.
This module
includes electrical digital reference indicator type MFE, d.c power supply, power switch with lamp. High accuracy, large display clearly visible digits, full remote control by serial interface RS232, ideally suitable as reference instruments integrated into calibration system.
The second module is designed to measure reference temperature signals from thermocouples and thermoresistences by precision digital indicators to test and calibrate temperature sensors and instruments. Module includes high accuracy reference instrument type MFT and type MFR for measuring reference signals from thermocouples and thermoresistance.
The third Module is designed for measuring reference signals from thermoresistances to test an calibrate temperature sensors and instruments. This module includes high accuracy reference instrument type MFR, 8 points multiplexer, providing scanning up to 8 sensors to be tested. High accuracy, large display clearly visible digits, full remote control by serial interface RS232, ideally suitable as reference instruments integrated into calibration system.
The fourth module is designed for measuring reference signals from thermocouples to test an calibrate temperature sensors and instruments. Module includes high accuracy reference instrument type MFT for the calibration of thermocouples: its multiplexer provides scanning up to 8 sensors to be tested. High accuracy, large display clearly visible digits, full remote control by serial interface RS232, ideally suitable as reference instruments integrated into calibration system.
The fifth Module is designed for distribution a.c power supply to the instruments. Module usually placed at the base of our test benches and or rack module. It includes a differential earth leakage breaker and four mains sockets shuko type, other on request.
>>>
View the product on scandura.it
SCANDURA & FEM
MODULAR CALIBRATION SYSTEM - SYSTEM 9000 PA
Calibration system composed of four different modules.
The first module is designed for measurement electrical reference signals to test and calibrate industrial transmitters.
This module
includes electrical digital reference indicator type MFE, d.c power supply, power switch with lamp. High accuracy, large display clearly visible digits, full remote control by serial interface RS232, ideally suitable as reference instruments integrated into calibration system.
The second module is designed to generate and measure reference pressure signals, for calibrating and testing process instruments. Module includes hand pump, precision volume regulator, high accuracy reference instrument, plug-in connectors. MFP high accuracy digital reference gauge measures pressure and displays the reading with 5 digits in 9 selectable engineering units, overpressure protecting valve (PV) against wrong connections. Large clearly visible digits and full remote control, available when connected to a serial RS-232 line, make it ideally suitable as a reference instrument integrated into a calibration system.
The third module is designed for generating reference pressure signals by high speed, high accuracy automatic pressure controller which uses an oscillating quartz sensor reference indicator. This module offers up to 6 measuring ranges with two pressure sensors and two control modes. Measuring ranges can be manually or automatically selected with the Autorange Function. Pressure control modes allow to emphasize either on generation speed or on control precision.
The fourth module is designed for distribution a.c power supply, to the instruments. Module usually placed at the base of our test benches and or rack module. It includes a differential earth leakage breaker and four mains sockets shuko type, other on request.
>>>
View the product on scandura.it
SCANDURA & FEM
DETECTOR TOXIC GAS - GASALERTMICRO 5 PID - IAQ MONITORING
The GasAlertMicro 5 PID is a handheld instrument for measuring VOCs.VOCs include building materials, paints, paint strippers, solvents, wood preservatives, correction fluid, aerosol sprays,
cleansers, disinfectants, air fresheners, adhesives, stored fuels and automotive products. Office equipment such as copiers and printers.The human health effects include eye, nose and throat irritation; headaches; loss of co-ordination; nausea; or damage to liver, kidney, and central nervous system. Features: * Smaller and over 50% lighter than competitive instruments * Water-resistant design in an integral concussion-proof enclosure * Continuous LCD shows simultaneous gas concentrations for five gases * 0 - 1000 ppm measurement of VOCs (Volatile Organic Compounds) * Data Logging Capability
>>>
View the product on wessexpower.co.uk
Wessex Power Technology LTD
ECONOMY PRESSURE GAUGES ECONOMY
General purpose pressure instrument designed for applications not corrosive to brass and where accuracy is less critical Dial:
1 1/2" (40mm), 2" (50mm), 2 1/2" (63mm), 4" (100mm), white aluminum
with black and red markings
Case:
Steel, painted black (plastic available)
Lens:
1 1/2" (40mm), 2" (50mm), 2 1/2" (63mm) - acrylic, 4" (100mm) - glass
Ring:
1 1/2" (40mm), 2" (50mm) - steel, painted black, 2 1/2" (63mm) or 4" (100mm) - steel, chrome painted
Pointers:
Steel, painted black
Wetted Parts:
Brass
Connection:
1/8" or 1/4" NPT, bottom or center back
Accuracy:
3-2-3% ANSI/ASME Grade B
>>>
View the product on atp-global.com
Wellstone
MULTIFUNCTION PROCESS CALIBRATOR - SPEC-CAL® ECLIPSE II
Haven Automation has recently upgraded its flagship Multifunction Process Calibrator, the Spec-Cal® Eclipse II, to incorporate new circuitry, considerably reducing the buildcost and now offering
increased cost effectiveness as well as high accuracy.
Haven’s Multi-Function Process Calibrator, the Spec-Cal® Eclipse II measures and simulates 12 thermocouple types to any of four selectable international standards(BS, JIS, DIN and ANSI).
The Multifunction Process Calibrator also simultaneously measures and/or generates mV, mA or volts. In addition, the Spec-Cal® Eclipse II measures and generates ohms, and measures and simulates 7 different RTD types.
The hand-held, battery powered Spec-Cal® Eclipse II Process Calibrator is protected by a tough, EMC shielded, aluminium case with a durable, splash-proof, polycarbonate keypad which has excellent tactile and audible feedback, a high contrast super twist LCD display and switchable backlight.
It is also available as a bench or panel mounted version, mains powered with a permanent backlit display. Used in conjunction with the Haven Multical Pressure Module, the Spec-Cal® Eclipse II Process Calibrator offers the capability of measuring pressures from -14.7 up to 500psi. Spec-Link™ Windows™- based software provides an automated calibration management facility to assist compliance with ISO9001 quality systems.
Features
Accuracy 0.007% of reading.
UKAS Certificate at no extra cost - mutually accepted in Europe through EAL*
Simultaneous measurement and generation of mV, mA ,V and ohms.
Measures and simulates 12 different thermocouple types and 7 RTD signals to selectable international standards (BS/JIS/DIN/ANSI).
Unique RTD emulation capability - precision RTD simulation whether used with DC, AC or pulsed waveform excitation currents.
Automatic remote cold junction compensation.
Multi-lingual - operates in 5 different selectable languages.
Pressure Calibrator - plugin modules available to measure pressures from - 14.7 to 500 psi.
Integral 24V DC supply.
Spec-Link™ Windows™ - based calibration software with RS232 interface and data logging facility.
Portable, bench and panel mounted versions available
>>>
View the product on haven.co.uk
Haven Automation
MASS FLOW CONTROLLERS
Mass flow controllers (MFCs) were originally designed to take the guess work out of precision gas flow control. Today, the demand for accurate and repeatable gas flow control has spanned dozens of
industries. Demand for mass flow controllers is growing and customers are requiring that MFCs are easy to use, fast, reliable, accurate, cost effective and robust.
The Alicat MC series mass flow controller is designed to meet the above requirements:
Simplicity
The MC series mass flow controller is very easy to use. With the local display, users can make changes to the configuration of the unit without the need for computers, complicated software or scripts.
Accuracy
Alicat MC series mass flow controllers can be configured with an accuracy spec of up to +/-(0.4% of reading + 0.2% of full scale) with a high-accuracy calibration. (Standard calibrations are rated at +/-(0.8% of reading + 0.2% of full scale)
Repeatablity
Alicat's patented technology allow its mass flow controllers to have very few moving parts. All of the MFC's internal components are fixed in place resulting in very little physical change inside the MFC. Little physical change in the flow cavity means higher rates of consistency and repeatablity. Alicat MC series mass flow controllers have a repeatablity of +/-0.2% of FS
Reduced Cost of Ownership
Alicat MC/MCP/MCR series and VC/VCP/VCR series flow controllers require very little power to run thereby reducing operating costs. MC and VC series flow controllers also have less pressure drop when compared to similar flow devices. Reduced pressure drop means more process fluids go into your process and not into your measurement devices. The MC series mass flow controllers also measure pressure, temperature and volumetric flow in addition to mass flow which means fewer instruments you will have to buy and install.
Speed
The Alicat MC/MCP/MCR series mass flow controller has a response time of less than 10ms and a control time of 100ms making it one of the fastest naturally responding mass flow controllers on the market today. See just how quickly an Alicat MFC responds to changes in this short video.
Versatility
MC series mass flow controllers are available in any flow range from 0.5SCCM through 1500SLPM. The MFCs are equipped with multiple analog outputs and inputs. Adding a totalizer allows users to see how much media has flowed through the MFC, making it a great way to monitor usage and indentify waste.
Alicat MC/MCP/MCR series MFCs can also be used in applications where flow control into a vacuum is critical. The modular design of the Alicat MC/MCP/MCR series MFC allows it to be used in systems in which flow is driven by a vacuum.
Dependability
There are currently over 22,000 Alicat products in service around the world. Alicat mass flow controllers are being used in processes like pharmaceutical and semiconductor manufacturing, fuel cell research, auto paint application, and emissions compliance equipment.
Alicat Scientific mass flow controller calibrations are NIST traceable.
Mass Flow Controller and Volumetric Flow Controller Features
Measured Parameters
MC, MCP & MCR Series Mass Flow Controller products measure
• Mass Flow
• Volumetric Flow
• Pressure (PSIA)
• Temperature (° Celsius or ° Fahrenheit)
VC, VCP & VCR Series Volumetric Flow Meter products
• Volumetric Flow
>>>
View the product on alicatscientific.com
Alicat Scientific
