Measurement accessories :
98 products
AC/DC HYSTOGRAPH
Measurement of all magnetic materials (hard magnetic AlNiCo, ferrite, SmCo, NdFeB, plastic composite; soft magnetic: electrical steel, ferrite …etc.)
Measurement with constant flux alteration d/dt
or sinusoidal polarization
Measurement with J-compensated surrounding coils, pole or field coils or strip measuring coil, ring core sensor, punched part sensor, Epstein frame, sheet measuring coil
Measurement at higher temperatures up to 200°C
Fully computer-controlled measuring system
Real time display of hysteresis during the measuring process
MAG Expert software for measurement, presentation and integration into QM systems
Windows desktop
Operating principles :
Determination of the characteristic properties of all magnetic materials.
Measuring process according to IEC 60404 ff. or to customer specifications.
Highly accurate measurements with very good reproducibility. Process-controlled monitoring and regulation of the increase in current.
When measuring hard magnetic materials the process runs with constant flux alteration d/dt and avoids interference caused by eddy currents and phase displacement between the field strength and polarization measurement.
With soft magnetic materials the measurement takes place with sinusoidal induction. Processing of the measured values with MAG/MPG Expert software for measurement, display and integration into QM systems.
Consists of measuring table with power supply unit and measuring electronics, electromagnet, Epstein frame, measuring system and computer hardware with MAG/MPG Expert evaluation software.
For measuring permanent magnets: J-compensated coils with a thickness of 1mm and diameters of 10 – 40 mm, pole measuring coils with diameters of 3 – 9 mm, as well as special sizes and shapes.
For measuring soft magnetic materials: SST measuring sensors for the quality control of strips, sheets, slit strips in all manufacturing widths; no complex sample preparation required.
Punched part sensor for nondestructive testing of punched parts in all geometries, e.g. when testing punched parts for motors. Ring core testing module for testing the magnetic properties of ring cores, stators or transformers directly on the component under manufacturing conditions.
Technical Data : AC / DC Hystograph
Measuring fixture: 2 free of drift fluxmeters F 01
Measuring coils: surrounding coils, pole coils, field coils
Power supply: 0 to ± 125 V, 0 to ± 25 A (50 A optional)
Electromagnet: interchangeable with a maximum diameter of 92 mm
Measuring poles: < ± 1 µVs/minute
Computer: PC, monitor, printer
Software: MAG/MPG Expert under Windows
Cabinet: measuring table with container
Dimensions: 760 x 1760 x 800 mm (height X width X depth)
Mains supply: 3 x 200 – 3 x 400 V AC, 16 A 50 / 60 Hz
>>>
View the product on brockhaus.net
Brockhaus
BATTERY POWERED "STAND ALONE" MEASURING UNIT - Z 16 / Z 17
Battery powered "stand alone" measuring unit - Z 16 / Z 17 (single axis)
Functions
The flexible magnetic tape makes also angular
measurements possible and is
available in lengths up to 33
meters.
Up/down function
2 tool offsets adjustable
Up/down switch over
Pulse factor
Selectable decimal point
Adjustable reference value
Inch/mm switch over
Switchover for absolute/incremental measurement
Fraction-display in "inch" mode possible
Mountig angle and guide carriage as accessories
Features
No more wiring is necessary! This battery powered LCD-Indicator is already combined with a magnetic sensor. The system is predestined for mounting on movable slides and stop-systems.
With a good battery the system's able to work up to 12 months in continuos operation.
The incremental measuring system Z16 measures movements directly, that means there are no pitch or measuring errors due to mechanical play.
The distance between magnetic sensor and magnetic tape may be up to 0.8 mm's without impairing system accuracy.
Technical specifications:
LCD display: 7 digits with sign, digit height 11mm
Power supply: commercial 1.5 V battery
Power consumption: approx. 1 mA
Operation speed: maximum 2.5 m/sec
Resolution of magnetic sensor: 0.1 mm
Housing: black aluminium panel housing
Housing dimensions: width 96 mm x height 72 mm
Cut out: Z16: W = 92 mm x H = 66 mm
Z17: W = 96 x H = 48 mm
Installation depth: Z16: 40 mm
Z17: 43 mm
Protection class: IP40 (installed state)
Technical specifications of magnetic sensor:
Length of sensor cable: 0.1 m to max. 1.0 m
Protection class: zinc die cast housing IP67
Operating temperature: + 5...+ 50 ° C
Bend radius/cable: min. 60 mm
Distance sensor/tape: maximum 0.8 mm
Install position: any
>>>
View the product on elgo.de
ELGO-Electric
