Selection of 40 products among
140
FACADE FOLDING SYSTEM SL 60E
Heat-insulated, top hung or floor mounted folding facade complying with the latest energy saving regulations (EnEV)
The wraparound slim Softline frame emphasises the filigree looks of the folding
facade with its casement frame in a timeless classic angular profile design. The slim frame profiles emphasize the slender character of the design. The panel joint measures a mere 130 millimeters. Wraparound ethylene propylene rubber seals ensure highly efficient sealing and neat edging. The profile accomodates a 24 mm thick foam core. This is why the heat insulation is unusually efficient and meets the stringent new energy saving regulations of EnEV despite the slim profile.
Element thickness 59mm, 24mm thermal break
Narrow frames und panel profiles (panel joint 130 mm)
High stability due to tongue-and-groove interlocking panel profile and robust corner joints with thermal break
Flush floor track without upstand for disabled access according to DIN 18025 available
Sealed against wind and rain by double wraparound seal
Complete window system to match the folding façade is
available: tilt and turn, parallel slide and tilt, fixed panels
No protruding runner and guide tracks
Concealed fittings for one handed operation
Lockable in any partly open position.
Applications
Wintergarden
External wall units for additional living space
Balcony Glazing as living space extension
Pool Glazing
>>>
View the product on solarlux.co.uk
Solarlux Systems
LILLIPUT BUILDINGS
A safe, stimulating and welcoming place for children to learn, play and grow
Lilliput nursery
With its wealth of child-friendly features, Lilliput nurseries include vibrant colours and
furnishings, child-level windows and wipe-clean surfaces inside and out. Lilliput nurseries are extremely popular with early years providers. We have already built more than 90 around the UK. Find out more about the Lilliput nursery building system!
Lilliput Children's Centres
Combining the child-focused elements of Lilliput Nursery with pioneering designs for community facilities, Lilliput Children’s Centres provide a wide variety of services for the good of the whole community. From nappy-changing rooms to health clinics and advisory services, Lilliput Children’s Centres offer a high quality environment for everyone. Find out more about the Lilliput Children's Centres!
Built to last with unrivalled warranty protection
With our pioneering 20-year structural and 5-year product warranty package you can be certain that your building is built to last. Plus, British Board of Agrément and Local Authority Building Control LANTAC approval confirm compliance with the relevant Building Regulations and Building Standards.
Peace of mind comes as standard
*
Unique Customer Charter - setting out the service you can expect
*
Comprehensive service - from complete project management and consultancy right through to climate control, security and interior design – we’ll provide everything you need.
*
Designed by architects - providing you with a bespoke solution.
*
Help with funding
*
Your project delivered On time, on budget. That's a promise.
>>>
View the product on portakabin.co.uk
Portakabin
BOWFIX
BowFix is a fixing used to stabilise bowed walls. 8mm in diameter the one point fixing is installed directly into the side or the end of floor joists via a clearance hole, around 12mm in diameter,
in the outer masonry.
BowFix are manufactured from Grade 304 Cu corrosion resistant stainless steel and are helical along the whole of their length. Grade 316 is also available. Bowfix are available in lengths between 400mm and 900mm and are supplied in single units. The manufacturing process produces very hard fins, that are able to cut a thread into the timber, and a soft and flexible core. The near leaf fixing is achieved by the use of HeliResin or HeliGrout 25.
Historically
The cause of bowing walls in many old buildings may well be due to the fact that there is no mechanical connection between the floor and ceiling joists and the masonry. The traditional method of connection has been to rely on friction due to gravity. When this frictional resistance is released, due to movement over the years within the timbers or masonry, it can leave a freestanding wall of considerable height that is very susceptible to bowing.
The problem of bowing walls has been addressed in the past by the use of S or X ties (hoop irons) bonded right through the building with bars to connect the front and rear walls or the two side walls together. The BowFix uses the same principles as this proven but unsightly method of restraint for bowing walls. The advantage of the BowFix is that it can be installed remedially and externally and uses the existing structural members to provide the necessary stability.
Presently
The current method of standard repair is to introduce a galvanised strap tying the floor to the wall. This involves removing furniture, carpets, skirtings and floorboards, the chasing out of plaster, the fixing with plugs and screws or nails and the subsequent making good. Therefore, although the product itself is very cheap the disruption involved during the installation makes this a very expensive option which relies on the holding capacity of plastic plugs and screws.
BowFix Solution
BowFixes can be installed both into side of joists and ends of joists. Installation is performed from outside the building through a 12mm hole in the building fabric. It must be emphasised that a check must be made for any services that may run through the floor or ceiling cavity. It is quite common for wiring to be present and is certainly not unknown to have water pipes for the heating system or even a mains water pipe in this location. It is recommended that checks are made in this area with the use of a boroscope.
BowFix into Side of Joist
In instances where the floor joists run parallel with the wall, the BowFix is inserted into the second joist. In this way, the strength and the load sharing is achieved via the floorboards on top of the joists and the ceiling boards below the joists crossing from one joist to the next. The old connecting bar is effectively replaced by the floor and ceiling boards already in place.
BowFix into End of Joist
Where the floor joists run into the wall and sit in pockets within the masonry, the BowFix is inserted into the end grain of the joist.
>>>
View the product on helicalsystems.co.uk
HELICAL SYSTEMS LTD
AMINA PICTURE FRAME PANEL LOUDSPEAKERS
For corporate, leisure, retail and residential locations requiring discrete sound systems, Amina Picture Frame Panel loudspeakers provide a unique and unobtrusive high quality voice and music
reproduction solution for rooms where pictures form the ideal finishing accessory. Utilising Amina's revolutionary technology and unique customisation service these Pictures now double as the sound reproduction system.
The Amina Picture Frame Panels are mounted very simply using keyhole fixings, or alternatively using the included hidden security fixings, discouraging removal without the appropriate tool. Each unit comes with a template to ensure quick and accurate fixing. Your choice of artwork (choose from published images - see www.picturespeakers.com for a choice of published artwork, or your own artwork provided via a digital file) is professionally applied to the panel surface and laminated with a transparent plastic film creating a durable, easy wipe clean surface. Your choice of optional wooden picture frame creates the ultimate finishing touch.
Coverage
One panel will be sufficient to create an even sound level in a room 8m x 5m. Add one additional panel for each additional 40m2 area coverage required. In voice reinforcement applications, space the panels evenly around the perimeter of the room. In surround-sound applications, position the panels accordingly (e.g. front left, front right, front centre, rear left and rear right)
Features
Choice of artwork, size and frame
Hidden anti-theft wall fixings
Wide dispersion
Benefits
Matches interior decor
Discourages theft
Wide area coverage
>>>
View the product on usd.uk.com
USD Limited
PACEMAKER BUILDINGS
Spacious, comfortable and robust
Whatever your requirements, The Pacemaker range of relocatable accommodation allows you to make the most of your space. With a Pacemaker building you can
experience the ultimate in ready-to-use accommodation, without compromising on quality.
*
Available in a wide range of sizes from 7m2 to 36m2.
*
Building complexes created by the versatile linking system.
*
High-quality environment for the comfort of employees.
*
Can be linked or configured to create two and three-storey accommodation.
*
Arrives ready for immediate use.
*
Patented floor design allows one-step access.
*
Energy-efficient design for reduced heating costs.
*
Transported by road on a suitable flat-bed lorry or trailer platform - Easily sited directly onto prepared foundations using the telescopic Lodastrut leg system.
BBA approval – Giving you outstanding quality assurance.
All Portakabin buildings undergo vigorous structural tests to achieve independent British Board of Agrément approval. However, Pacemaker leaves the competition behind by being the only relocatable building in its class to do so.
Peace of mind comes as standard
*
Unique Customer Charter - setting out the service you can expect
*
Comprehensive service - from complete project management and consultancy right through to climate control, security and interior design – we’ll provide everything you need.
*
Your project delivered On time, on budget. That's a promise.
>>>
View the product on portakabin.co.uk
Portakabin
