Light analysis: suppliers, wholesalers and manufacturers on Hellopro
Search   


Light analysis :

114 products
Select the category
    Selection of 48 products among 114
    LIGHT SOURCES - XLA 100

    LIGHT SOURCES - XLA 100
    Providing leading edge optical and power performance now and in the future The XLA 100 is Cymer’s new, ultra line-narrowed, high power argon fluoride (ArF) production light source for next generation lithography tools. Featuring a dual chamber design called MOPA (Master Oscillator Power Amplifier), the XLA 100 provides outstanding optical and power performance. MOPA enables the XLA 100 to produce 40 W of output power—two times the output power of Cymer’s earlier, single chamber-based ArF models. By utilizing the ArF (193 nm) exposure wavelength, the XLA 100 enables chip design rules to shrink, which leads to faster processing speeds and boosts memory capacity per chip. With an ultra line-narrowed spectral bandwidth of = 0.25 pm FWHM, the tightest spectral bandwidth performance of any DUV production light source, the XLA 100 provides the light that enables high contrast imaging for lithography tools with an numerical aperture (NA) up to 0.9. >>>
    View the product on cymer.com Cymer
    STELLARNET LIGHT SL1-CUV

    STELLARNET LIGHT SL1-CUV
    StellarNet Light SL1-CUV option has all the basic SL1 features listed above with the addition of an with integrated 1cm cuvette holder and one VIS-NIR collimating lense. Two positioner adjustments allow cuvette cell fitness alignment. There are 3 different collimator positions to allow use with other light sources or for 90 degree fluorescence applications. Te SL1-CUV is a great chemistry accessory for all VIS-NIR and NIR-InGaAs spectrometers. >>>
    View the product on steelbro.com Steelbro
    LIGHT SOURCES - XLA 105

    LIGHT SOURCES - XLA 105
    Providing leading edge optical and power performance now and in the future The XLA 105 is Cymer’s second-generation, leading-edge argon fluoride (ArF) light source to feature the production-proven, dual-chamber Master Oscillator Power Amplifier (MOPA) platform—enabling both ultra line-narrowed bandwidth and 40 W of output power. Because the XLA 105 is built on the existing XL Series platform, customers will enjoy seamless integration into their existing processes and rapid time-to-yield. By utilizing the ArF (193 nm) exposure wavelength, the XLA 105 enables chip design rules to shrink, which leads to faster processing speeds and boosts memory capacity per chip. With an ultra line-narrowed spectral bandwidth of = 0.20 pm FWHM, the XLA 105 provides the light that enables high contrast imaging for lithography tools with an numerical aperture (NA) up to 0.93. >>>
    View the product on cymer.com Cymer
    LIGHT SOURCES - XLA 200

    LIGHT SOURCES - XLA 200
    World’s First Immersion-ready Excimer Light Source Enabling Immersion Lithography Just as water is extending the potential of 193-nm lithography, Cymer’s production–proven, MOPA-based platform is enabling the industry to push the limits of deep ultraviolet (DUV) technologies and fast becoming the industry standard to support the exacting needs for ultra-high numerical aperture (NA), immersion-scanner systems, enabling the industry to stay ahead of Moore’s Law. The XLA 200 is Cymer’s third-generation, leading-edge argon fluoride (ArF) light source to feature the production-proven, dual-chamber Master Oscillator Power Amplifier (MOPA) platform—enabling both ultra line-narrowed bandwidth and 60 W of output power. Because the XLA 200 is built on the existing XL Series platform, customers will enjoy seamless integration into their existing processes and rapid time-to-yield. >>>
    View the product on cymer.com Cymer
    STELLARNET LIGHT SL1-FILTER

    STELLARNET LIGHT SL1-FILTER
    StellarNet Light SL1-FILTER option has all the basic SL1 features listed above with the addition of an extended nose cone housing that allows 1/2 inch diameter filters to be installed. This option also includes a color equilization filter to improve the signal to noise for color measurements in the blue and red regions by allowing a larger reference spectra to be taken by flattening the detectors green peak. Up to 3 filters may be installed in the nose cone with an optional LENS-DCX in the base for 3x signal enhancement. >>>
    View the product on steelbro.com Steelbro
    LIGHT SOURCES - XLA 300

    LIGHT SOURCES - XLA 300
    Just as the introduction of water into the process has extended the potential of 193nm lithography, the newest release of Cymer's production-proven, Master Oscillator Power Amplifier (MOPA)-based XL Series is now enabling high volume production immersion lithography down to the 45nm process node levels. The XLA 300 is Cymer's fourth-generation, leading-edge, 193nm argon fluoride (ArF) laser light source featuring the production-proven, MOPA platform-enabling both ultra line-narrowed bandwidth and up to 90W of output power at an industry-leading 6kHz repetition rate. Higher rep rate of 6kHz enables high throughput to deliver sustained productivity for volume manufacturing >>>
    View the product on cymer.com Cymer
    LIGHT SOURCES - ELS-7010

    LIGHT SOURCES - ELS-7010
    Meeting the Needs for sub-100 nm Lithography Applications The technically advanced ELS-7010 meets the requirements of high volume production of sub-0.10 micron devices on 248 nm exposure tools. The ELS-7010 offers a 4 kHz, 40 W optical output, plus ultra-narrowed bandwidth performance and high-speed wavelength control. Advanced architecture and materials incorporated into the design of the ELS-7010 significantly reduce the light source consumables costs. The 7000 series product line offers a fully rounded product platform for both KrF and ArF 4 kHz excimer light sources so that customers have the flexibility to “mix and match” products within the same manufacturing environment. Consider these benefits of the ELS-7010 • Improved Line Narrowing Module (LNM) and Wavelength Stabilization Module (WSM) ensure optimal focus control, maximum exposure latitude, and improved CD control. >>>
    View the product on cymer.com Cymer
    LIGHT SOURCES - NANOLITH™ 7000

    LIGHT SOURCES - NANOLITH™ 7000
    Providing the Spectral Power to Deliver Maximum Process Margin A fourth-generation design, the NanoLithTM 7000 provides the required output power and stability while providing a highly line-narrowed bandwidth to meet the stringent requirements of high volume production today. The NanoLith 7000 offers a bandwidth of == 0.5 pm FWHM and == 1.3 pm 95 percent energy integral, which enables next-generation scanners with high Numerical Aperture lenses to produce the resolution for sub 100 nm devices. Today’s chipmakers seek light sources that make the critical transition in exposure wavelength from 248 nm using krypton fluoride (KrF) to 193 nm using argon fluoride (ArF) while maintaining the performance and volume demands of mainstream manufacturing. The NanoLith 7000 was designed to meet these demands. >>>
    View the product on cymer.com Cymer
    LIGHT SOURCES - ELS-6010

    LIGHT SOURCES - ELS-6010
    Providing a clear, low-risk path to 130 nm Cymer’s ELS-6010 enables semiconductor manufacturers to leverage their existing KrF experience during the transition to 130 nm design rules. It provides a highly line-narrowed spectral bandwidth of = 0.5 pm (FWHM) and = 1.4 pm 95 percent energy integral. The ELS-6010 enables full image performance from lithography steppers and scanners using lenses with numerical apertures > 0.75. >>>
    View the product on cymer.com Cymer
    DEGREE OF POLARIZATION (DOP) METER

    DEGREE OF POLARIZATION (DOP) METER
    Using a patented maximum & minimum search technique, this DOP meter measures and displays the Degree of Polarization (DOP) of a light source in real time, with high accuracy and wide dynamic range. While polarimeter-based systems are expensive and can be inaccurate for low DOP sources, and polarization scrambler-based instruments are less accurate for high DOP sources, this amazing, low-cost DOP meter provides simple, accurate measurement of both low and high DOP sources. >>>
    View the product on generalphotonics.com General Photonics
    DIGITAL MICROHARDNESS TESTER

    DIGITAL MICROHARDNESS TESTER
    Superior design & workmanship Direct reading of Vickers and Knoop micro hardness Fracture toughness function Light Load Brinell hardness Cylindrical Correction Function Automatic precision turret for accurate, repeatable alignment Up to 2 indenters and 4 objective lenses can be mounted LCD touch panel display for ease of use Rigid construction minimizes compliance errors Largest workspace with 120mm height and 160mm maximum depth Unique 9 (type-A) and 12 (type-B) load systems from 1 to 2000 grams >>>
    View the product on microphotonics.com Micro Photonics
    PHOTOMETER 7100

    PHOTOMETER 7100
    Photometer 7100 The New Photometer 7100 is fully integrated with the Palintest system of water analysis. It offers a great value instrumental analysis for an extensive range of water tests. The photometer 7100 accurately assesses the colour formed in the test sample and displays the readings directly in concentration units on its large LCD screen – no more inaccurate results due to variation in operator eyesight or lighting conditions. Not only does the 7100 have the whole range of Palintest tests available, but is highly portable, and rugged in design. Its full IP67 rating means it is fully waterproof and ideal for on-site testing in any application. The unique adaptive cell holder automatically adjusts to the tube size, and accommodates any size vial with no adapter needed. The instrument interface comes with 5 languages built in, and a large easy to read backlit display with easy to navigate menu. The Photometer 7100 is part of the successful and versatile Palintest water test system. It is supplied in a carrying case designed to carry the instrument, and your choice of reagents to provide a complete all-in-one on-site analysis kit. >>>
    View the product on ccp-gransden.com CCP Gransden Ireland Ltd
    HAND HELD REFRACTOMETERS

    HAND HELD REFRACTOMETERS
    Eclipse Optical Hand Held refractometer Hand-held refractometers are low-cost, portable instruments used for ‘on the spot’ determination of Refractive Index (RI) of liquids or the concentration of solutions. Offering a choice of scales, Eclipse refractometers can be used in a multitude of applications across many and varied industries. Quality at an affordable price By combining the best available modern manufacturing methods and materials and a good understanding of customer requirements, B+S has achieved a quality instrument at a very competitive price. The ECLIPSE is both a practical and aesthetically pleasing design. Eclipse refractometers are supplied with a soft protective carrying case and a certificate of conformity. Special features make measurements easy and reliable • simple zero adjust with lock • comfortable eyepiece with smooth adjustment • shaded field of view for comfort and distinction • high precision, clear scale • easy-clean prism • unique sample ‘dribble’ feature • hand-grip for comfort and insulation • low weight • anti-roll supports • push-on prism flap Special Models In addition to the models listed below, B+S can manufacture instruments with special scales specified by the customer. Contact the Sales Department at B+S for further details. All instruments are supplied with instructions for use. >>>
    View the product on bellinghamandstanley.com Bellingham + Stanley
    CHEMETS: LOW TO MEDIUM RANGE VISUAL COLORIMETRIC ANALYSIS

    CHEMETS: LOW TO MEDIUM RANGE VISUAL COLORIMETRIC ANALYSIS
    To perform a test, dip the tip of the CHEMet ampoule into the sample and gently snap off. The correct volume of sample is automatically drawn in, filling the ampoule. Invert the ampoule twice to facilitate mixing. In 2 minutes or less, the relevant colour change will have occurred and the result can be measured by comparing the ampoule to the appropriate colour standard. For higher concentrations, the flat comparator is used. For lower concentrations, the round comparator is used. >>>
    View the product on galgo.co.uk Galgo (UK) Limited
    PROGRAMMABLE DSP RADIOMETER - OL 730D

    PROGRAMMABLE DSP RADIOMETER - OL 730D
    The OL 730D is a completely microprocessor controlled, multi-functional radiometer / photometer which can be programmed to read directly in any user specified radiometric or photometric optical quantity. The OL 730D is virtually ideal for all types of measurement and features high sensitivity, autoranging, auto-zeroing, highly accurate readout and range-to-range linearity, 4½ digit (6½ digit via computer) plus exponent display, user variable response time, an extremely large dynamic range and RS-232-Interface (IEEE-488 optional) for computer control. >>>
    View the product on olinet.com Optronic Laboratories Groupe - Gooch & Housego
    PHOTOMETER - CHECKITDIRECT

    PHOTOMETER - CHECKITDIRECT
    Advantages Automatic zero calibration Rapid measuring cycle (approx. 3 seconds) Large digital display SMD microprocessor technology LEDs with long-term stability Suitable for use as a testing instrument Uses Lovibond® tablet reagents or vial tests with long term stability Fully equipped unit supplied in a case Excellent value for money Automatic switch-off CheckitDirect-Photometer The microprocessor-controlled CheckitDirect photometers are pre-programmed for specific test methods and calibrated in the Lovibond® laboratory. The CheckitDirect models each offer 1 test method, while the CheckitDirect+ units are programmed for a number of different parameters. >>>
    View the product on tintometer.de Tintometer
    MICROCUVETTE ACCESSORY

    MICROCUVETTE ACCESSORY
    The microCUVETTE measurement accessory for the miniDAWN and DAWN is now here! It is possible to perform dynamic and 90° static light scattering measurements for sample volumes as small as 10 microliters (and the EOS can perform multi-angle measurements simultaneously). This accessory is fully compatible with our existing hardware and software. Batch measurements continue to be a popular technique for characterizing samples. Micro-batch measurements have several advantages over larger volume batch measurements as well as on-line injections of discrete samples for the study of proteins: i) sample preparation is simple, ii) expensive samples can be recovered and isolated, and iii) it is easy to study time-dependent characteristics of a protein sample. >>>
    View the product on wyatt-europe.com Wyatt Technology Europe
    PYRANOMETERS CMP 11

    PYRANOMETERS CMP 11
    CMP 11 uses higher quality glass domes and a version of the detector technology originally developed for the CM 22 and is a step up in performance from the CMP 6. It is particularly suitable for meteorological networks and the reduced response time of 1.66 seconds (63%) meets the requirements for solar energy applications. A waterproof socket is fitted for the signature yellow signal cable, which is available in a range of lengths pre-wired to the waterproof plug. The integral bubble level is raised to the top of the housing and can be viewed without removing the redesigned snap-on sun shield, which also covers the connector. The connector with gold-plated contacts allows for easy exchange and re-calibration. The drying cartridge is now a screw-in type that can be simply removed using a coin, for changing the desiccant that is supplied in convenient refill packets. >>>
    View the product on kippzonen.com Kipp & Zonen
    DIFFRACTION GRATING - TE 214

    DIFFRACTION GRATING - TE 214
    * Glass slides measure 90 x 30 mm with three different rulings of 100, 300 and 600 lines per mm * The ruling apertures are approx. 16 x 9 mm * The gratings are of spectroscopic type, an excellent way of demonstrating the effect of different line frequencies, either by casual viewing or by inclusion in a simple optical system. The side-by-side diffraction gratings on this slide make it easy to investigate diffraction patterns and the relationship between line spacing and angle of diffraction. >>>
    View the product on patonhawksley.co.uk Paton Hawksley Education Ltd
    SPECTRO-GUIDE

    SPECTRO-GUIDE
    Total Appearance Control - color and gloss in one unit. The overall appearance of a product is influenced by color and gloss. A sample of the same color but higher gloss level is visually perceived darker and more saturated than a low gloss sample. In order to get a uniform appearance, both attributes need to be controlled. The spectro-guide is unique as it measures both attributes simultaneously. Thus, the cause of a mismatch can be clearly defined in any situation. • Color (45/0 or sphere) and 60° gloss are displayed at the same time • In compliance with international specifications • Tolerances for color and gloss allow quick pass/fail decisions in production >>>
    View the product on bykgardner.com Byk Gardner
    SOUND LEVEL METER AND SPECTRUM ANALYSER : SC310

    SOUND LEVEL METER AND SPECTRUM ANALYSER : SC310
    The SC310 is a user-friendly, type 1 integrating sound level meter. It can be used as either a sound level meter or as a real time spectrum analyser in one-third octave bands and octave bands, with type 1 filters. The SC310 measures all functions simultaneously, with all frequency weightings. Among these are all the functions necessary to calculate the basic indices for the acoustic evaluation of most countries in the world: S, F and I functions, equivalent continuous levels, percentiles, impulsiveness indices, peak levels, sound exposure levels, short functions, etc. The free memory space can be also configured as a circular memory. This feature along with the possibility of downloading data simultaneously to its storage, converts the SC310 into the perfect platform for permanent acoustic monitoring. The SC310 preamplifier and microphone is detachable. You can uncouple it and move it away from the SC310 by using the extension cable (CNR-010). The instrument can be complemented with an outdoor kit (TK-1000) for making measurements in the open air. >>>
    View the product on cesva.com CESVA
    COLOR SENSOR

    COLOR SENSOR
    As color is an obvious product characteristic, the recognition and reliable detection of colors play an increasingly important role in industrial automation. Equipped with outstanding features, the color sensors of Pepperl+Fuchs cover most applications, whether sensing color marks at a fixed distance or detecting colored objects at variable distances, and whether detecting an individual color or sensing ten colors. Fiber optic cables also allow color sensors to be used in harsh environments. Operation of the sensors is very easy: Teach-In of the color occurs with the push of a button. Color tolerances can be taught by re-Teaching. Programmed colors’ values are stored in the sensor’s memory, even after power-off. The short response time of our color sensors permits reliable color recognition in fast processes. Applications: Identification of colored markings and codes in the printing and packaging industry Sorting according to color in electronics and pharmaceutical production Detecting weld seams on cans Detecting tax stamps on cigarette boxes Turbidity check and material identification in the chemical industry Sorting of wood by color Color print and bundle check in the textile industry >>>
    View the product on elconinst.com Elcon Instrinsic Safety Ltd
    PORTABLE COLORIMETER : COLORTEST

    PORTABLE COLORIMETER : COLORTEST
    Applications color measurement and recording for quality conformance inspection color distance measurement measurement of absolute color spaces evaluation of measured color information Performance features portable colorimeter with external probe 45°/0° measuring geometry according to DIN 5033 small probe head, spring-loaded automatic/manual start trigger simple 4 button menu control non-volatile memory for 1000 color readings and for 100 color readings including remission spectra backlit graphic display comprehensive data processing software True spectral analysis! Measuring principle Spectrophotometric principle with true spectral analysis >>>
    View the product on elektrophysik.com ElektroPhysik
    SECULIFE IA LUMINANCE METER

    SECULIFE IA LUMINANCE METER
    The SECULIFE IA is suitable for demanding light analysis tasks, for example approvals and consistency testing, as well as luminance measurements at image viewing devices, e.g. in the fields of computer tomography, digital radiography and sonography. Luminance measurements at distances of 1 meter to infinity, taking ambient light into account, can be performed with this device; the measuring angle is 1°. >>>
    View the product on gmc-instruments.com GMC Instruments (UK) Ltd
    BYPASS - GLASS LEVEL GAUGES KSR REFLEX GLASSES

    BYPASS - GLASS LEVEL GAUGES KSR REFLEX GLASSES
    The principle of the reflex glass is the reflection of external light. In the gas or vapour phase the light is reflected by prismatic grooves in the sight glass, achieving a bright display. In the liquid phase the light is absorbed, thus providing a dark display of the level. KSR reflex glass indicators are available in housing versions for pressure ranges up to PN 25 and in cover versions for pressure ranges up to PN 100. They are the most suitable, best value-for-money indicators for steam use up to 35 bar, but can also be used in countless applications in the process industry. >>>
    View the product on ksr-kuebler.com KSR Kuebler Ltd
    REFLECTION HIGH-ENERGY ELECTRON DIFFRACTION

    REFLECTION HIGH-ENERGY ELECTRON DIFFRACTION
    30 keV RHEED E-GUN RDA-002G CONTROL POWER SUPPLY RDA-004P The RDA-002G E-gun and RDA-004P Power Supply have been designed and developed with careful consideration for operational efficiency. A remote control box contains both an accelerating voltage and emission current meter making it easy to confirm the diffraction image observed on the screen while safely and efficiently controlling all operational parameters of the screem. Designed for easy maintenance, including filament replacement and beam alignment, there are no minor adjustments required from run-to-run. Capable of varying the high voltage, filament, and XYZ lens of RHEED. Surface treatment inside the electron gun enables outgas control from the electron gun. >>>
    View the product on lktech.com LK Technologies
    COLORIMETERS - SC400 SERIES

    COLORIMETERS - SC400 SERIES
    Orbeco-Hellige introduces a new series of rugged, waterproof, single parameter colorimeters for laboratory and field testing. The SC400 comes is a wide variety of parameters and uses the popular new Powder Pack reagent chemistries. The instrument is easy to use, has a large backlit display, a real time clock and a datalogging feature which allows storage of up to 10 measurements.Kit Includes: carrying case, colorimeter, 9V battery, sample cells, instructions and reagents. Advantages Waterproof Internal Data Storage Real time Clock Powder Pack Chemistries >>>
    View the product on orbeco.com Orbeco Analytical Systems
    COLOUR SENSORS

    COLOUR SENSORS
    A wide range of Colour Sensors available for a wide range of applications. Colour sensors from Powelectrics work on the same principal as a human eye. All colours can be described as a combination of the basic colours red, green and blue. The sensor illuminates the coloured surface with white light or LEDs. The light reflected from the surface to be recognized will be split up into these basic colours. As well as the colour values, there is an additional signal in our colour sensors that is proportional to the intensity. Because these values are normalized (always total 10 V), a colour recognition signal can be obtained which is independent of the distance of the sensing head from the surface. >>>
    View the product on powelectrics.co.uk Powelectrics Ltd
    COLORIMETER - MODEL 6030

    COLORIMETER - MODEL 6030
    The Model 6030 is a portable filter Colorimeter with a digital read-out of %Transmittance, Absorbance (O.D.) and Concentration. The unit is ruggedly constructed, water resistant and powered by internal batteries, making it ideal for use in the field or the laboratory. Eight hermetically sealed filters are provided for use over the range of 400 - 710nm. This enables the user to select the appropriate measurement wavelength for the sample under test. Samples may be presented to the unit in either 22mm diameter glass cuvettes or 10mm square disposable cuvettes by using the adaptor supplied. Read-out is given via a 3½ digit LCD. Measurements and calibrations are initiated via a sealed membrane keypad. Calibration is automatic for zero and 100%T values. An optional datalogging facility is available on this unit which enables up to 240 results to be stored. These may be downloaded via the RS232 link for printing or analysis, or may be recalled onto the instrument display. >>>
    View the product on speckanalytical.co.uk SB Analytical


    12Suivant >>Fin >
    Go to page


      Search    
     
     
     
    Search
    See all of the sector's products : Measuring devices, analysis and sensors