Leak detection: suppliers, wholesalers and manufacturers on Hellopro
Search   


Leak detection :

150 products
Select the category
Selection of 79 products among 150
FLOODLINE LEAK 1.MKII

FLOODLINE LEAK 1.MKII
The Floodline Leak 1.MkII is a self-contained single zone leak detection module specially designed for incorporation into other control/ alarm systems, air conditioning units and BMS etc. The module can be used with all Floodline sensors. The compact module is din-rail mounted and screw terminals provide connections for the leak sensors, power input and volt-free contact output. Function: Water/liquid detection Zone Capacity: 1 Zone Power: Multi-Voltage 12 or 24v, AC or DC Construction: Housed within a polycarbonate enclosure. Dimensions: Length 100mm, width 75mm, depth 22.5mm Fixing: Din-rail mounted Monitoring: LEAK- continuous water/liquid SYSTEM FAULT - sensor or leader cable damage, failure or disconnection Alarm Indicators: Flashing LEDs for LEAK or SYSTEM FAULT All alarms displayed separately and continuously until corrected and reset if in manual mode Status Indicators: Power Control Auto/Manual Reset Outputs: Leak - system fault SPCO Relay 1Amp@24vdc >>>
View the product on andel.co.uk/ Andel Ltd. / P.P.L.
LEAK DETECTOR THE INFORMANT 2

LEAK DETECTOR THE INFORMANT 2
Dual Purpose Refrigerant & Combustible Gas Leak Detector The Informant™2 leak detector allows pinpoint detection of both refrigerant and combustible gas leaks with the same instrument. Its unique combination of state-of-the-art patented sensor technology, advanced software design and microprocessor controlled circuitry offers you unmatched precision coupled with tremendous speed. It is unquestionably the most sensitive, most reliable, most accurate leak detector on the market today. And the fastest. Swap sensor tips within seconds and never worry about adjusting sensitivity levels–it’s taken care of automatically–even where high levels of background vapors or refrigerants are present. The refrigerant sensor tip is finely tapered to 0.2 inch diameter–so you can get in between coils and fittings, gaining access to hard to reach areas. The Informant™2 leak detector features an audible indicator with a mute option coupled with sequential LEDs to monitor increasing concentrations of refrigerant or combustible gases. Features and Benefits: One instrument—two functions Lightweight and ergonomically designed Swap sensor tips in seconds Microprocessor controlled for accuracy and reliability Sensitivity is automatically adjusted Sensors are the industry’s most responsive Hydrophobic filter prevents moisture contamination Optional rubber boot holds MagLite® flashlight Sequential flashing probe tip, dual LED displays and loud tick rate indicates relative concentration levels Detects all halogens and combustibles Response time is two-tenths of one second Probe length adjustable from 3" to 20" Specifications: Sensing Elements: Refrigerant - Heated Diode, U.S. Patent No. 5,932,176 Combustible - Patented semiconductor type, 5 year typical life, plug-in replacement Refrigerants Detected - All CFC, HCFC and HFC refrigerants including: R-12, R-22, R-123, R-134a and blends R-404A, R-408A, R-409A and R-410A (i.e., any refrigerant containing Chlorine, Fluorine or Bromine gas) Combustible Gases Detected - All combustible gases and vapors Alarm Sensitivity: Refrigerant 0.25 oz/year of R134a (hardest to detect refrigerant) Combustibles Minimum 50 PPM (Methane) Alarm Types - Audible and dual visual LEDs Power Source - Four (4) AA disposable alkaline batteries included Warm-up Time - 10 seconds Response Time: 0.2 second Battery Life: 4 to 5 hours, under typical intermittent operation. Probe: 20" (50.8 cm) maximum length, fully extended; 3" (7.62 cm) if wrapped around instrument. Includes LED indicator Size: 1.75"W (4.44cm) x 9.62"L (24.43cm) x 2.25"H (5.72 cm) Weight: 0.86 lbs. (0.39 kg) with batteries Agency Approvals: Refrigerant UL listed in accordance with SAE J1627 Combustible MET Lab certified to UL 913, intrinsically safe for use in Class I, Division 1, Group D hazardous areas. CE-Mark: Independently tested >>>
View the product on bacharach-inc.com Bacharach
SONIC LEAK DECTECTOR

SONIC LEAK DECTECTOR
The Sonic Leak Detector is a low cost instrument that allows the rapid detection of pressurised gases escaping from any form of plant system. The ultrasound "noise" generated from any gas e.g. compressed air, steam, refrigerant or vacuum can be easily detected and the leak location rapidly and accurately identified. The Sonic Leak Detector can significantly reduce leak detection times and produce significant cost savings. It can be used to detect leaks with compressed air or gas, steam, refrigerants, vacuum, bearings and electrical arcing. >>>
View the product on classltd.com Class Instrumentation Ltd
AUTOMATIC LEAK DETECTOR LEAKMASTER 2097

AUTOMATIC LEAK DETECTOR LEAKMASTER 2097
Automatic leak detector for Aerosols Tests the whole can Finds leaks Immediately Quick recovery time Photec™ PID system Intrinsically safe Capacity up to 300/min Available as a single or production line machine Finds micro leaks in aerosols and pressure packs Can be installed before, after or in place of a water bath*. Sensitivity is not affected by wet cans. Quick release change part shrouds for different can sizes. Plug-in detection module for easy servicing. Pneumatic outputs to reject system. Handling system optimises test cycle. Single head or rotary machines with automatic soft reject of leakers. Gross leak detector upstream of rotary machine avoids contamination >>>
View the product on dhi.co.uk DH Industries Ltd
BEER KEG LEAK DETECTION - VERI-KEG

BEER KEG LEAK DETECTION - VERI-KEG
Dimaco’s Veri-KEG is a leak detection system, which detects leaks from worn out valve rubber seals. It is an optical system, which uses a well proven imaging technique to reliably inspect a mixed flow of kegs fitted with new and old spear types, of varying seal sizes and profiles. Features : Micro leaks from keg valve In mix flow of new and old kegs In motion inspection (No Stoppage) Automatic height adjustment The Benefits : Prevents leaking kegs reaching trade Improves product quality Reduces return costs >>>
View the product on dimaco.co.uk Dimaco (UK) Ltd.
FAST ACCURATE SF6 LEAK DETECTION

FAST ACCURATE SF6 LEAK DETECTION
SF6 GasCheck P1 is designed for the location, leak testing and measurement of SF6 gas in high voltage electrical switchgear and many other leak detection applications. This instrument has none of the problems of registration, storage and transportation associated with instruments based on the radioactive source ECD principle, which also require high purity and high pressure Argon gas. >>>
View the product on edie.net/Ireland Edie Ireland
REFRIGERANT GAS LEAK MEASUREMENT

REFRIGERANT GAS LEAK MEASUREMENT
GasCheck R2pc is designed specifically for the leak detection and measurement of refrigerant and air-conditioning gases including CFC's, HFC's and HCFC's. The instrument is light weight and handheld enabling the user to locate a leak and to take a direct leak rate measurement in a simple one handed operation. Robust and reliable, GasCheck R2pc has a choice of display units either as a gas weight loss, gm/yr or as a concentration of gas leakage in air, ppm. Sourcing a leak is made simple as when a leak is detected above the set alarm level an audible alarm is sounded and an LED flashes leaving the user in no doubt that a leak has been detected. >>>
View the product on water-waste-environment-marketplace.com Eimco Water Technologies Limited
CALIBRATED LEAK - FCO210

CALIBRATED LEAK - FCO210
* Easy to use calibrator * Variable flow rates * Clear display * Shut-off valveThe FCO210 is ideal for calibrating production line leak detectors, fault finding and system checking. Easy to use, adjustable, accurate, and portable, the FCO210 sets the standard.Variable flow ratesUsing a high precision needle valve, the FCO210 can be used for a multitude of flow rates. Simply use the needle valve to set the desired flow rate.Easy to usePlug it, switch it on and turn the shut off valve. The FCO210 will immediately show you an accurate display of the flow rate without any fuss. No options, selections or unnecessary features. Simple. >>>
View the product on furness-controls.com Furness Controls
ULTRASONIC (ACOUSTIC) GAS LEAK DETECTION

ULTRASONIC (ACOUSTIC) GAS LEAK DETECTION
Ultrasonic (Acoustic) Gas Leak Detection The Groveley GDU is an omni-directional ATEX approved intrinsically safe airborne leak detector that responds to pressurised gas leaks. The GDU does not detect specific values of LEL or ppm rather, it responds to the sound generated by escaping gas at ultrasonic frequencies. The detected sound is proportional to the leak rate (mass flow rate). In basic terms, the greater the leak rate (large leak), the greater the ultrasound emitted. Ultrasonic gas leak detectors complement traditional gas detection methods used in refineries, gas plants and offshore installations, in fact anywhere where there is pressurised gas. The GDU is factory calibrated and has no moving or replaceable parts and responds instantly to leaks operating over a wide dB range. The GDU uses Industry Standard 4-20mA output to interface to the plant control DCS, PLC or 4-20mA input card. Once connected the alarm level should be adjusted to a level higher than the general background noise. GDU Data Sheets >>>
View the product on groveley.co.uk Groveley Detection Limited
SF6 GASCHECK P1 - FAST ACCURATE SF6 LEAK DETECTION

SF6 GASCHECK P1 - FAST ACCURATE SF6 LEAK DETECTION
SF6 GasCheck P1 is designed for the location, leak testing and measurement of SF6 gas in high voltage electrical switchgear and many other leak detection applications. This instrument has none of the problems of registration, storage and transportation associated with instruments based on the radioactive source ECD principle, which also require high purity and high pressure Argon gas. Data Storage and printing at the touch of a button. Although designed for SF6 in switchgear other gases with a high affinity for electrons, such as refrigerant R12 may also be detected. The negative ion capture (NIC) detector is combined with `smart sensor´ technology. There are no items requiring maintenance or service in the handgun or console. This instrument meets the demands for quality and traceability to International standards as required by today's industry. SF6 GasCheck P1 is now also available with a highsense option detecting leaks as small as 1 x 10-8 ml/sec! Features include: * No radioactive detector * No argon or other pressurised gases required * Smart sensor technology, detachable probe * Display units cc/sec, gm/yr and ppm * Touch screen with help menus * Lightweight 3 button handgun * Data storage and printing * No training required, switch on and go * Transit: robust steel transit case for export shipping * Large leaks present no contamination problems with rapid clear down * Ultra high sensitivity with a 1 x 10-8 ml/sec highsense option >>>
View the product on ionscience.com ION Science
REFRIGERANT GAS LEAK MEASUREMENT

REFRIGERANT GAS LEAK MEASUREMENT
GasCheck R2pc is designed specifically for the leak detection and measurement of refrigerant and air-conditioning gases including CFC's, HFC's and HCFC's. The instrument is light weight and handheld enabling the user to locate a leak and to take a direct leak rate measurement in a simple one handed operation. Robust and reliable, GasCheck R2pc has a choice of display units either as a gas weight loss, gm/yr or as a concentration of gas leakage in air, ppm. >>>
View the product on lawr.co.uk/ Local Authority Waste and Recycling (LAWR)
DETECTOR : LEAK TESTING

DETECTOR : LEAK TESTING
Leak testing is now generally used as one of the methods for quality and process control. It is used in the machining or assembling process of a product, in order to detect not only the presence of pores or cracks in a cast piece, but also the absence of machining, the incorrect assembly of a component, a defective gasket or the imperfect machining of two mating surfaces. Marposs offers itself as a partner in the formulation and realization of dedicated leak testing systems such as: automatic machines and semi-automatic or manual bench gauges; automatic assembly lines, leak tests and/or dimensional checks. Typical checks: oil circuit leakage; water circuit leakage; fuel circuit leakage; gasket leakage. Examples of parts that are checked: engine block; cylinder head; gear case; differential gearbox; crankshaft and camshaft; steering gearbox; sleeves; all types of valves. >>>
View the product on marposs.com Marposs
BLISTER PACK LEAK DETECTION SYSTEMS

BLISTER PACK LEAK DETECTION SYSTEMS
Blister Pack Leak Detection Systems The VeriPac 225/BLV inspection system evaluates and analyzes blister package integrity with precision and repeatability. The core technology of the VeriPac 225/BLV is based on an ASTM approved vacuum decay leak test method that was developed using VeriPac instruments, with the addition of special vision imaging technology to easily identify the location of defective blister cavities. The VeriPac 225/BLV provides non-destructive, non-invasive inspection of multi-cavity blister packaging made with any material, flat or glossy finish, printed or non-printed surface. Each test cycle is rapid with test results available in numerical, statistical and image formats. >>>
View the product on peco-europe.com Peco Europe
LEAK DETECTION SYSTEM - ILS500

LEAK DETECTION SYSTEM - ILS500
Leak Detection System ILS500 is a complete system for leak testing, tracer gas handling, tooling control and test sequencing. It comprises three main modules, housed in a compact cabinet: the Controller Unit, the Detector Unit and the Operator Interface Unit. Equipped with a wide range of accessories, the ILS500 meets all test requirements and offers a large variety of test possibilities. It is available in Standard, Combi Probe and Filler version. >>>
View the product on sensistor.se Sensistor Technologies
ACOUSTIC WATER LEAK DETECTION - AQUAPHON® AF 100

ACOUSTIC WATER LEAK DETECTION - AQUAPHON® AF 100
The Aquaphon AF100 is far more than simply a cable avoidance tool. The AQUAPHON® AF100 shows you: Depth to service. It is very useful to know if you are tracing the correct service and knowing the depth of what you are tracing can give you more information. A water pipe is unlikely to be buried, (but it has been known!), at 300mm but a telecommunication cable might well be!Minimum & Maximum detection methodsThe Minimum method is particularly useful for tracing pipes, very accurately, instead of increasing at the centre of the pipe the signal decreases giving a far cleaner “centre”. >>>
View the product on sewerin.co.uk Sewerin Ltd
LEAK-MASTER®

LEAK-MASTER®
Micro-leak detection system for packages based on CO2. LEAK-MASTER® features non-destructive detection even of smallest leaks without the need of costly Helium Benefits minimal response time quick product change for flexible and rigid packs no calibration required operator friendly - data and process parameter entry by means of touch screen or keyboard easy-to-use intuitive system - no special skills required convenient data administration and evaluation for customer oriented quality documentation various chamber sizes easy installation and start-up stainless steel cabinet Data transer via Ethernet Download: Spec sheet Download: Brochure Options barcode reader for simple and quick user/product selection splashproof housing with our without IP-protection stainless steel mobile workstations for various models available various chamber sizes also available as Inline model >>>
View the product on wittgas.com Witt Gas Techniques Ltd
INDUSTRIAL REFRIGERANT LEAK DETECTOR H25-IR

INDUSTRIAL REFRIGERANT LEAK DETECTOR H25-IR
The H25-IR is an industrial leak detector used for low-level detection and leak rate quantification of CFCs, HFCs, HCFCs and halogen gas compounds that are used in air conditioning and refrigeration equipment, fire suppression systems, and various other residential, commercial and industrial apparatus. The instrument can be used to locate and quantify leaks as well as log and totalize the entire group of leaks in a systems to ensure quality assurance compliance. The unit is capable of detecting 29 of the most commonly used refrigerants and halogen gas compounds. Features & Benefits: Utilizes Infrared Technology for Detection -- ensures long sensor life and high accuracy Fewer False Alarms -- use of infrared technology enables response to refrigerants only Fast Response Time -- responds to leaks in less than 1 second High Sensitivity -- detects leaks as small as 0.01 oz/yr Internal Leak Source -- enables calibrations to be made quickly and easily Logging -- enables the total leak rate of a system to be quantified 8 Inch Flexible Probe -- enables leak checking in hard-to-reach areas Adjustable Sensitivity Ranges -- enable “nuisance” leaks to be ignored 4 Relay Outputs -- enables external alarm control 4–20 mA Output -- provides remote monitoring 2 Year Warranty Specifications: Gases Measured R-11, R-12, R-22, R-23, R-113, R-114, R-123, R-124, R-134a, R-227, R-236fa, R-401A, R-402A, R-402B, R-404A, R-407A, R-407C, R-408A, R-409A, R-410A, R-500, R-502, R-503, R-507, R-508B, H-1211, H-1301, H-2402, N-1230 Sensor Infrared Measurement Units oz/yr, g/yr, mL/s, PaM3/s, ppm Measurement Range & Accuracy 0–50 oz/yr, ±10% of reading 50–1000 oz/yr, ±25% of reading Warm-Up Time 2 minutes Probe 8" (20.3 cm) flexible probe with 6' (1.8 m) or optional 12' (3.6 m) hose Operating Modes Search -- detects presence and location of gas leaks; Measure -- calculates and displays leak rate Response Time Less than 1 second (with 6' hose) Sensitivity 0.01 oz/yr for most gases (minimum of 0.03 oz/yr for all gases) Temperature Drift ±0.8% of reading per °C Calibration Internal R-134a leak source, or External using customer supplied leak source AC Input 100–240 VAC, 50/60 Hz Power Consumption 15 Watts Operating Temperature Range 32 to 122°F (0 to 50°C) Storage Temperature Range –4 to 122°F (–20 to 50°C) Weight 18 lbs (8.2 kg) Dimensions 4"H x 10.75"W x 15"D (10.2 x 27.3 x 38.1 cm) >>>
View the product on bacharach-inc.com Bacharach
REFRIGERANT GAS LEAK MEASUREMENT

REFRIGERANT GAS LEAK MEASUREMENT
GasCheck R2pc is designed specifically for the leak detection and measurement of refrigerant and air-conditioning gases including CFC's, HFC's and HCFC's. The instrument is light weight and handheld enabling the user to locate a leak and to take a direct leak rate measurement in a simple one handed operation. Robust and reliable, GasCheck R2pc has a choice of display units either as a gas weight loss, gm/yr or as a concentration of gas leakage in air, ppm. >>>
View the product on edie.net/Ireland Edie Ireland
ADJUSTABLE CALIBRATED LEAK - FCO210

ADJUSTABLE CALIBRATED LEAK - FCO210
* Variable flow rates * Easy to use * Clear display * Shut-off valveThe FCO210 is ideally suited to the calibration of production line leak detectors, fault finding and system checking. Easy to use, adjustable, accurate, and portable, the FCO210 sets the standard.Using a high precision needle valve, the FCO210 can be used for a multitude of flow rates. Simply use the needle valve to set the desired flow rate.Plug it, switch it on and turn the shut off valve. The FCO210 will immediately show you an accurate display of the flow rate without any fuss. No options, selections or unnecessary features. Simple.The FCO210 uses a large 3.5 digit LCD display to show a clear, high resolution display of the flow rate. The excellent viewing angle allows the calibrator to be mounted anywhere and still be visible by the operator.Rather than using a needle valve to shut the flow off, the FCO210 uses a high specification shut-off valve. The needle valve can remain in place and the flow rate the same for the next time the calibrator is used ensuring a quick and effortless calibration routine. >>>
View the product on furness-controls.com Furness Controls
GASCHECK - RAPID, ACCURATE GAS LEAK MEASUREMENT

GASCHECK - RAPID, ACCURATE GAS LEAK MEASUREMENT
GasCheck is a unique instrument as not only can it detect leaks of almost any known gas or gas mixture, it can also measure the leak. Its micro thermal conductivity sensor responds rapidly to a leak helping you to detect even the smallest quantities of escaped gas. GasCheck is conveniently calibrated against helium - the most commonly used tracer gas - and is particularly sensitive to ammonia, argon, butane, hydrogen, SF6 and refrigerants. The instrument range offers intrinsically safe versions for use in flammable areas and can also safely detect flammable gases. GasCheck Features include: * Detects even the smallest of leaks * Repeatable readings * Accurate leak measurement * Intrinsically safe versions * Data logging capability * Hand held * Large back lit display * Choice of readings in ppm or ml/sec * Holds peak reading >>>
View the product on ionscience.com ION Science
HYDROGEN LEAK DETECTOR - H2000 PLUS

HYDROGEN LEAK DETECTOR - H2000 PLUS
Hydrogen Leak Detector H2000 PLUS is the new and improved model replacing the old H2000. H2000 PLUS is the ultimate tool for leak detection and leak locating using diluted hydrogen as tracer gas, finding leaks down to 5x10E-7 mbarl/s. New functions such as Auto Ranging and extended bi-directional communication will make your leak testing more efficient than ever before. The picture shows the benchtop model. >>>
View the product on sensistor.se Sensistor Technologies
REFRIGERANT LEAK DETECTOR TRU POINTE™

REFRIGERANT LEAK DETECTOR TRU POINTE™
Bacharach's newest hand held refrigerant leak detector designed specifically for technicians looking for an easy to use, reliable and inexpensive leak detector that can quickly and accurately mark any leak spot. The Tru Pointe is designed to be instantly responsive to all refrigerants. It is even accurate when used in environments where high levels of refrigerant vapors are present. No manual sensitivity adjustments are necessary during the inspection process. Simply turn the unit on, and let it mark the spot!. The Tru Pointe is suitable for HVAC Service Technicians, Refrigerant Service Technicians, Plant Maintenance Departments, Automotive Service Facilities, and Refrigerant & Environmental Chamber Manufactures who are in need of a small, lightweight and rugged instrument that is capable of detecting and then pinpointing small to large refrigerant leaks in tight spaces such as those found in refrigeration units and automobile engine compartments. Features: Detects all CFC, HFC, and HCFC refrigerants Patented Heated Diode Sensor Technology Instantaneous response time Innovative sensor replacement design Battery-powered with low battery indication Long-life, DC brushless fan High and low-sensitivity modes Automatic zero and background compensation Audible & visual leak detection Easy to use, one-handed operation No user calibration required Specifications: Sensing Element - Patented Heated Diode, U.S. Patent No. 5,932,176 Refrigerants Detected - All CFC, HCFC and HFC refrigerants including: R-12, R-22, R-123, R-134a and blends R-404A, R-408A, R-409A and R-410A (i.e., any refrigerant containing Chlorine, Fluorine or Bromine gas) Alarm Sensitivity - 0.1 oz/year of R134a (hardest to detect refrigerant) Alarm Types - Variable-intensity audible and visual Power Source - Two ‘D’ disposable alkaline batteries Warm-up Time - 10 seconds Response Time - Instantaneous Battery Life - 8 to13 hours continuous operation, dependent on sensitivity mode Probe - 14" (356mm) flexiable Size - 2" W x 9.38" L x 2.5" H (50.8 x 238.3 x 63.5 mm) Weight - 1.16 lbs. (0.53 kg) w/ batteries Agency Approvals - UL listed in accordance with SAE J1627 CE-Mark - Independently tested Warranty - One year, including sensor >>>
View the product on bacharach-inc.com Bacharach
PRODUCTION LINE LEAK DETECTOR - FCO750

PRODUCTION LINE LEAK DETECTOR - FCO750
* Suitable for simple and complex test sequences * Dual and automatic pressure regulation options * Leak sensitivity down to 0.1 Pa or 0.01 cc/min * Programmable electrical and pneumatic outputs * Graphical display of test progressThe FCO750 is the latest high specification leak detector from Furness Controls and builds on the highly successful FCO290. Suitable for bench-top mounting or integration into automated assembly fixtures, the FCO750 offers an affordable, "No Compromise" approach to leak detection. >>>
View the product on furness-controls.com Furness Controls
FLAME DETECTION

FLAME DETECTION
Flame Detection Groveley Detection offers a complete range of flame detection products that precisely match your performance and cost requirements. Our flame detectors can be used in virtually any application where fire may result in a loss of capital equipment or where risk to personnel is high. We offer IR, IR3, UV/IR and visual flame detection (CCTV / IR) products for both industrial and commercial applications including oil and gas pipelines, turbine enclosures, offshore platforms, FPSOs, aircraft hangers. Our flame detectors can be supplied with a range of approvals including ATEX, UL and FM. >>>
View the product on groveley.co.uk Groveley Detection Limited


12Suivant >>Fin >
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Measuring devices, analysis and sensors