Industrial intelligent cameras :
64 products
BOARD CAMERA MODEL PC-1005
Board Camera Model: PC-1005
22 X 26mm single board camera
1/4" CCD Colour DSP Camera
Low Voltage (5VDC)
Extremely Compact
PC control via Software
Panasonic GP-CX compatible
Image Sensor : 1/4"
Inter-line type colour CCD image sensor
Effective pixels : 500 (H) x 582 (V) - 291.000 pixels
TV system : PAL
Video Output : VBS 1,0 Vpp sync. Negative 75 ohms unbalanced
Scanning system : 2 : 1 interlace
Synchronisation : Internal (Quartz)
Horizontal resolution : more than 350 TV lines
Min. Illumination : 0.6 Lux max. (Output level 50% / AGC ON / F1,4)
S/N ratio : better than 45 dB (AGC Off)
Electronic Iris : 1/50 sec. to 1/100.000 sec.
White Balance : Auto White Balance
Gamma : 0,45M
Power supply : DC +5 V
Current consumption : 160 mA (at DC 5 V)
Operation : -5 °C to + 45 °C max. 80% humidity
Storage : -20 °C to + 60 °C max. 90% humidity
Built-in lens : f=3,0mm F2,8 D-mount lens
Lens Options : f=1,9mm ; f=4,0mm, f=6,0mm ; f=8,0mm ; f=12,0mm
Pin hole: f=3,7mm
Weight : 10 g. without lens
>>>
View the product on pacific-board-cameras.co.uk
Pacific Corporation UK Ltd
LUMENERA CCD CAMERA - INFINITY 3-1 COOLED
Infinity 3-1 cooled CCD camera
1.4 Megapixel resolution
15 fps
2/3” cooled CCD image sensor
Colour or monochrome
USB 2.0 interface
Twain driver
Lumenera’s INFINITY3-1 Cooled CCD camera is designed
to be used in a wide variety of scientific applications. Cooled models are ideal in low-light conditions and where high dynamic range is required. Both color and monochrome product models are available.With 1392x1040 resolution and on-board processing, these cameras deliver outstanding image quality and value for industrial and scientific imaging applications.
Uncompressed images in live streaming video and still-image capture are provided across a USB 2.0 digital interface. No framegrabber is required. Hardware and software based synchronization trigger is available as an option provided. On-board memory is available for frame buffering. INFINITY3-1 model cameras are offered in both enclosed and board-level form. Custom form factor (sizes) can be provided.
All Lumenera products are supported by an experienced team of software developers and application engineers. We understand your imaging needs and are here to help you with your integration and development.
Camera SensorImage Sensor Sony ICX285 2/3” format, 1.4 megapixel color or monochrome progressive scan CCD sensor
Effective Pixels 1392 X 1040, 1.4 million pixels
Frame Rate 15 fps at 1392x1040, increased through binning and ROI
Digital Output 8 and 12-bit
Dark Current (e-/s) 0.15 electrons / pixel / s when cooled
Pixel Size 6.45um x 6.45um
Full well capacity >18,000 electrons
Readout Noise 8 e- rms
Cooling type Hermetically sealed and dry gas filled Peltier cooling to 25 degrees Celsius below ambient
Readout Frequency 2.86 MHZ
Camera ControlsIntegration Time 2/1000 to 20 minutes
Auto Exposure Automatic / Manual
White Balance Automatic / Manual
Gain Programmable / 1 to 10x optimizable
Interface USB 2.0 high speed interface
Dimensions (L x W x H) 3.85 x 2.00 x 2.75 inches
Lens Mount C-Mount lens adapter
Binning Options 2x2, 3x3, 4x4
Power Requirement External 5VDC - 3amp
Power Consumption ~ 2.5 watts uncooled / ~8.5 watts cooled
Operating Temperature 0° C to +50° C
Operating Humidity 5%-95%, Non-condensing
>>>
View the product on meijitechno.com
MEIJI TECHNO
CAMERA SYSTEM METAVIEW C100
The Meta C100 is a camera based non-contact viewing system for weld seams or beads. It is the tested technology for manual weld torch positioning for submerged welding machines and for general
applications which require a small but rugged video camera.. The system allows for easy integration with existing or new automated welding systems.
How it works
The Meta C100 is a compact camera in a water-cooled
housing, which sends high quality video pictures from the sensor, which is available in mono and colour versions, requires only a single coaxial cable for power input and signal output to a remote monitor.
Welding Industry Suitability
The system is designed to be easy to use and to deliver consistent and reliable
service. It can be readily integrated with most welding equipment including operation with circumferential and linear machines. The system is supplied as a viewing
system only, allowing the operator to control up/down and left/right commands to
existing motorised slides. The system can also be supplied with the optional slide pendant and controller as a complete guidance system with drives and slides.
C100 tracking system retrofits to work with your existing welding machine
and slides
C100 can be cost effectively integrated into new welding installations
System General Information
The operator is presented with a clear picture image of the welding area from the sensors. This information is then used to monitor the process or to make general adjustments to the position of the welding torch.
Scope of Supply Options
The basic sensor system includes the sensor and mounting bracket, TV monitor, power supplies and cables.
>>>
View the product on meta-mvs.co.uk
Meta Vision Systems Ltd
