Hydraulic coupling :
20 products
DST MAGNET DRIVE COUPLINGS
DST is a specialist manufacturer of permanent magnet drive couplings for gear pumps, rotary piston, centrifugal and liquid ring pumps, as well as agitators, stirrers and mixers.
Benefits
DST
hermetically sealed drives combine the advantages of a maintenance free, "failure-proof" sealing system with a torque transmission coupling that doesn't wear. If the maximum torque is exceeded, the coupling will break transmission, protecting it from overloading.
This Ensures:
the safety of personnel and the environment when handling hazardous chemicals
the integrity of sealing when compressing gasses or pumping vacuums,
the risk of contamination is minimised in sensitive pharmaceutical, biological and food processes,
and is ideal in fit-and-forget situations where the risk or cost of equipment leaking in service is unacceptable
>>>
View the product on intercontrolmeteringsystems.co.uk
Intercontrol Metering Systems
ISO. A CONNECT-UNDER-PRESSURE PC SERIES
Holmbury PC Series ISO.A couplings incorporate pressure relief mechanisms that enable them to be connected by hand, even when there are residual pressures in the hose lines.
When male and female PC
couplings are used, they can be connected when there is residual pressures of up to 250 bar in either of the hose lines.
If a PC coupling is to be connected with a standard ISO.A coupling, then the hose with the PC coupling can have up to 250 bar residual pressure whilst the hose with the standard coupling must be at zero pressure.
PULL BREAK FEMALE COUPLINGS
Used for connecting flexible hose lines. To connect, pull back the locking sleeve, insert the male, release the sleeve. To disconnect, pull back the locking sleeve and withdraw the male.
PUSH PULL FEMALE COUPLINGS
The female coupling is panel mounted using the circlip grooves in the locking sleeve and must be connected to a flexible hose to allow axial movement of the coupling. The male is connected by being pushed in and disconnected by being pulled out. This release mechanism protects the coupling and hose from damage in the event of an accidental separating force being applied to the connection (e.g. a trailer becoming detached from the towing vehicle).
TECHNICAL DETAILS:
Maximum working pressure 250 bar.
Fluid loss connecting with residual pressure 1.5 ml.
Connection force without residual pressure 90 N.
Connection force with residual pressure from: CF = 90 + (0.55 x RP)
>>>
View the product on holmbury.co.uk
Holmbury
