Selection of 35 products among
35
AEROBIOPROCAB
Aerospray is a technique which creates a fine mist composed of billions of micro droplets.
These minute particles are diffused with the aid of an air canon across the entire surface and area to be treated.
The Aerospray treatment is indispensable for food processing industries, pharmaceutical laboratories,
cosmetic suppliers, medical practitioners and all public service areas (including restaurants, bars and
retail food outlets).
This technique is used in all areas at risk from biological and micro-organisms
contamination where hygiene is critical and where the risk of contamination is high.
Examples include food processing and packaging areas, meat and fish preparation areas, cold storage rooms
and dry storage areas.
Further examples where our product can be beneficial are in the medical profession, operating theatres,
intensive care units, hospitals, clinics and nurseries as well as in the field of public service including
exhibition centres, theatres and gymnasiums as well as airport and transport locations.
The Aerobio device offers several treatments :
Disinfection of surfaces
Deodorisation of premises Large volume insect dis-infestation
Humidity control
The different models of Aerobio are adapted to each application.
A. Area disinfection by air
The disinfectant density is between 6 and 8mls per cubic metre.
Once the parameters of the density and of the area volume are registered the Aerobio device
operates automatically until the process is completed.
Both the aero spray process and the ventilation process have the same running time.
B. Deodourisation of premises
Once the density and the area volume indications for deodorisation are registered the
Aerobio device runs in the same way as the disinfection application.
>>>
View the product on gastrodirect.fr
DEHUMIDIFICATION EVAPORATIVE HUMIDIFIER, CENTURY SERIES 4
A fully portable evaporative humidifier, easy to use, economical to run
Features
High output ‘Wick’ uses capillary action to evaporate moisture
Longer life than most foam pads
High Reliability,
few moving parts
Quiet operation
3-speed fan with high speed boost and virtually silent night-time modes
More energy efficient than warm mist or steam units, does not heat the water
Removable power pack for safe, easy cleaning
Rigid moulded plastic construction
Light weight for transportation, only 12kg when packed
Aesthetically attractive appearance
Removable water bottle for easy filling
Optional dust and carbon air filter available
Optional mains fill kit for permanent plumbing available
Capacity
Capable of humidifying an office with volumes of up to 400m³
Capable of humidifying a whole house
Why humidify?
Reduces risk of static electricity
Comfort of personnel, prevents dry eyes, dry skin and sore throats
Health, may aid asthma sufferers
Applications
Homes
Art Galleries
Printing processes
Hospitals
Industrial Processes
Laboratories
Homes
Art Galleries
Offices
Museums
Computer Rooms
Paper Stores
Cigar Storage
Church Organs
>>>
View the product on calorex.com
Calorex
CALOMAX - STEAM-TO-STEAM / HTHW-TO-STEAM HUMIDIFIER
The Calomax™ HT humidifier range operates from either high temperature hot water or raw boiler steam.
It is available in three models with outputs ranging from 12 to 360 kg/hr of pure, sterile
steam, depending on input temperature or raw steam pressure.
Steam injection
Steam is delivered to the AHU via a standard, stainless steel steam lance, or a JS MultiSteam pipework may be used where evaporation distance is critical. Short evaporation distances are a feature of the Calomax units.
Water quality
Rated output of the Calomax humidifier is assured irrespective of water conductivity. It will therefore operate on any quality of water.
Water supplies containing dissolved solids ultimately form scale within the steaming chamber and access is provided for the removal of scale as found necessary. In hard water areas where water is softened by a base exchange process, the rate of scale deposit is reduced.
Hygienic and Safe
All parts of the JS Calomax in contact with steam or water are manufactured from stainless steel, nickel plated copper, tinned copper, tinned gunmetal or other non-corrosive materials for maximum hygiene and safety. In addition, there’s an automatic drain and flush cycle operated by a timer which effectively drains and renews the water periodically. This feature prevents scumming and foaming and ensures efficient operation at all times.
Features:
# Dry odourless sterile steam from High Pressure hot water or raw boiler steam
# Outputs 12 kg/hr to 360 kg/hr
# Three models available
# No carry-over of impure raw boiler steam
# Compact, self generative units
# Suitable for air pressures ± 2000 Pascals
# Virtually noiseless - clean steam is generated at atmospheric pressure
# Stainless steel steam lances
# Easily installed and maintained
# Automatic timer operated drain and flush
>>>
View the product on jshumidifiers.com
JS Humidifiers
NEPTRONIC SKG - GAS-FIRED STEAM HUMIDIFIER
The Neptronic SKG has the World's smallest footprint of any gas-fired humidifier. A 100kg/h unit has a footprint of just 610mm by 560mm making it ideal for plant rooms where space is at a
premium.
It has also been designed with maintenance in mind. Every steam humidifier builds up scale, when run from mains water, as the minerals present in the water are left behind during evaporation. Scale build-up in the SKG is absolutely minimised by the patented spiral heat exchanger. This unique design expands and contracts significantly during operation, which literally cracks the scale from the surface to keep the heat exchanger clean and fully efficient. The result is a marked contrast to the performance of flat or tubular heat exchangers.
Scale is either washed away during flush cycles or accumulates as fragments in the bottom of the boiling tank. Periodically, the tank needs to be removed to empty out the scale fragments. Again, the SKG’s unique design takes account of this. There’s a quick-release mechanism on the boiling tank to allow it to be lowered, removed and emptied of scale in less than five minutes. It also makes manual handling safer and minimises the space needed around the unit for maintenance.
Features:
# Smallest footprint for any gas-fired humidifier
# Maintenance-friendly design with quick-release tank mechanism
# Widest modulation from a single unit (8.7-400kg)
# Patented spiralled elements that resist scale
# Solid state water level sensor to always maintain water levels even during foaming
# Single point connections for water, gas, flue, drain, controls & electricity
# High combustion efficiency (93%)
>>>
View the product on jshumidifiers.com
JS Humidifiers
SV30H PLUS PANEL
The new SolarVenti SV30H Plus is the latest addition to the SolarVenti product range. This new product provides almost all of the outputs that our existing SV30 does - ventilation, a powerful
dehumidifying effect, and significant supplemental space heating. Yet from the same unit it also provides free solar hot water (SWH).
The picture shows an SV30H Plus with the cover removed.
The SV30H Plus is supplied as a complete self fit package. It is delivered with everything you need to get Solar Water Heating for free.
The kit includes:-
-: The SolarVenti SV30H Plus unit (dimensions and specification as per the SV30)
-: 100L Atlantic hot water cylinder with heat exchanger and anode *
-: 10L open expansion tank
-: 16mm Polypropylene pipe plus insulation
-: 12 Volt regulator [Danotech]
-: Room thermostat [Schluter]
-: 12 Volt (solar powered) pump [Laing]
-: Antifreeze for the solar heating circuit
-: Roof and wall mounting brackets and fittings
The unit weighs less than 33Kg.
*We can alternatively supply twin or triple coil vented hot water cylinders in varying sizes suitable for utilisation in combination with your existing heating systems. Please contact us for further details.
The SV30H Plus is completely independent of mains electricity. The pump is solar powered so hot water transfer automatically takes place everytime the the sun shines. SolarVenti's unique design allows self cooling even when the pump is stopped - this helps to counteract boiling of the heated water in the system.
>>>
View the product on solarventi.co.uk
SolarVenti UK Ltd
DEHUMIDIFICATION, WALLMOUNTED DH30/60
For dehumidification and condensation control in commercial premises and industrial environments, with additional space heating options.
Applications - Dehumidification of:
Electrical
sub-stations
Libraries
Basements/Cellars
Sports Clubs/Changing Rooms
Warehousing/Storage
Drying Rooms
Range:
Models DH30 and DH60. Each unit is self contained in an attractive wall-mounted cabinet with fully automatic operation. Hot gas defrost option required for operation down to 0°C.
Performance:
Efficient dehumidification over a temperature range of 0°C - 40°C
Hot gas defrost option
Model DH30 produces 30 litres in 24 hours @ 20°C, 75% RH
Model DH60 produces 60 litres in 24 hours @ 20°C, 75% RH
Problem Solving:
Heat pump dehumidification is a reliable and efficient method of solving problems of excess moisture and condensation which cause damage and deterioration.
Space Heating Options:
The standard Calorex dehumidifier recovers heat from the moist air and uses it to heat the discharged air. When additional space heating is required either unit can be supplied with an electric resistance heater option, controlled by thermostat. See the data sheet for options.
Configuration Option :
Either unit can be supplied as a through the wall (TTW) version to allow installation in an adjacent space. Grilles matched to the unit are supplied as standard.
>>>
View the product on calorex.com
Calorex
